My Moto Razr M is unable to boot into ap fastboot mode. When I press the Power + Volume Up and Down buttons I get to the screen to select what options I want, but when I try to scroll down to select ap fastboot, it doesn't do anything. Is there any way around this? Thanks!
Related
i just read this on a site its for hard reset but cant you get into recovery mode with it
Hold the Volume Down button and press and release the Power button. A window with some option will be displayed on the screen. You can use the Volume Up/Down buttons to scroll between these options. The following options are present to you on the screen: Fastboot, Recovery, Clear Storage and Simlock.
http://news.softpedia.com/news/How-to-Hard-Reset-the-Samsung-Galaxy-S-147417.shtml
Not working on my device, which also doesn't allow 3 button recovery ㅜㅜ, you got my hopes up for a sec though.
Hi to enter bootloader mode power the phone off then hold the up button on the dpad and press the power button untill the bootloader menu apears.
STOCK RECOVERY MODE
1. Hold POWER BUTTON and X button on keyboard
2. After logo popup release POWER BUTTON and keep hold just X button
3. Triangle with little android popup release X button
4. Press POWER BUTTON once
Popup screen : Android System Recovery <2e>
Android System Recovery Utility
Reboot system now
Apply SDcard update.zip
Wipe data/Factory reset
Wipe cache partition
BOOTLOADER MODE
Power device off hold and press the up button on the dpad and press the power button for 4 seconds and let go only of the power button you will then see the bootloader menu (see my debranding flashing guide)
whitch one is the dpad button?
sale-caly said:
whitch one is the dpad button?
Click to expand...
Click to collapse
The "OK" button on the keyboard.
Stock recovery mode
is stock recovery mode to debrand the phone? or something else?
also where do I get update.zip
Here is Cyanogenmod for Motorola Flipout!
nixonpjoshua said:
is stock recovery mode to debrand the phone? or something else?
also where do I get update.zip
Click to expand...
Click to collapse
Use this link for the update.zip:
http://forum.xda-developers.com/showthread.php?t=2209254
Hi, i have brick my Nexus 4, is a softbrick. i tried alot of different method to save it, but most of the method need to enable usb debugging, but i cant even load in to screen, how to enable usb debugging???? any ideas guys?
Turn off your phone, then press VOL Down + power. Phone will boot into fastboot mode. From there you can either flash whatever you want or enter stock recovery by browsing the fastboot menu with the volume keys and selecting an option with the power button.
fabrizziop said:
Turn off your phone, then press VOL Down + power. Phone will boot into fastboot mode. From there you can either flash whatever you want or enter stock recovery by browsing the fastboot menu with the volume keys and selecting an option with the power button.
Click to expand...
Click to collapse
thx for you reply
but unfortunately, i have nothing in my sd card...
My Razr M was a bit sluggish so I restarted it. Now it's stuck on the screen with the pulsating Motorola logo. I can reboot using the power & volume keys but that's it. It will not turn off. I can't get it to the system recovery options. It is not rooted.
I just bought a new phone so it's not the end of the world, but I was still have a few files that I need to transfer from my Razr M. I can't get access to the phones' memory buy connecting it to my PC.
Any help would be greatly appreciated & rewarded with cookies.
Ta
Amo
If it's not a hardware issue, you could reflash the operating system without deleting your userdata partition. App settings etc. might get deleted tough.
You'll need RSD Lite and your firmware version from here. Extract it, and delete the line which erases the userdata and just to avoid problems also delete any lines that contain "GetVar", "var" or "oem" Don't forget to save the changes.
Go into fastboot mode first:
Turn off or reset your phone first by pressing and holding Volume-up + Volume-down + power for a few seconds until your phone switches into “Boot Mode Selection Menu”, scroll down with Volume-down to highlight “AP Fastboot“ then press Volume-up to select it, you will get into ”AP Fastboot Flash Mode“.
Click to expand...
Click to collapse
then open RSD Lite, select your modified XML file and flash by clicking "Start".
No sure what my firmware is other than JB. I'm also in Australia. Those firmwares all say US, does that make a difference?
Yes, I assumed you have the XT907 (Verizon). But if it's the Australian XT905, you would need an appropriate firmware.
Have you attempted to boot into the stock recovery?
Sent from my DROID RAZR M using XDA Premium 4 mobile app
Fastbooting does nothing. Guess I'm just gonna have to accept that it's bricked.
So you flashed the system and it still doesn't boot properly?
Maybe there's something wrong with the userdata (but rather unlikely). The last chance would be to erase this partition too (leaving the appropriate line in the XML). If it's still bricked after it, then it's a hardware issue.
I put the firmware on an SDcard & put the card in the Phone. That's as far as the process will go. Nothing else will happen.
I believe the stock recovery cannot install images from SD cards. So that won't work.
There's no other way to get anything on the phone. When I try & connect it to the computer via USB nothing happens.
You have to go into fastboot mode first, then you can connect it.
And that's the problem; it won't go into fastboot mode.
It has to. You wouldn't see the Moto logo otherwise. Press and hold Power and both Volume buttons, wait until the phone resets (and a few more seconds) and then release just the Power button. You should see the options menu, where you can select fastboot (or even just recovery as poppers162 suggested).
I've done that. It never works. All it does is go back to the logo. Nothing else.
It has to.... If that didnt do it. Hold vol down + power for ten seconds once you see the screen flicker hold vol down + vol up... Then select which ever option you need...or if its rebooting over and over then just hold vol up + vol down and wait on the reboot
Sent from my XT907 using xda app-developers app
Hello,
I recently rooted my samsung s5 (odin and CF-Auto-Root-klte-kltedv-smg900i.tar) to try and troubleshoot my power button not working, as when I restarted before root, it would work for a minute then stop. But after rooting i accidentally restarted my phone with a power manager app in recovery mode and now I can not connect to my phone via odin. The closet image i could get is this imgur.com/MiGuKGz and on the top of the text in red it has:
Android System recovery <3e>
KIT49H.G900IDVU1ANC
Volume up/down to move highlight
power button to select
Please help
lewie89 said:
Hello,
I recently rooted my samsung s5 (odin and CF-Auto-Root-klte-kltedv-smg900i.tar) to try and troubleshoot my power button not working, as when I restarted before root, it would work for a minute then stop. But after rooting i accidentally restarted my phone with a power manager app in recovery mode and now I can not connect to my phone via odin. The closet image i could get is this imgur.com/MiGuKGz and on the top of the text in red it has:
Android System recovery <3e>
KIT49H.G900IDVU1ANC
Volume up/down to move highlight
power button to select
Please help
Click to expand...
Click to collapse
try to flash the stock firmware
sammobile. firmwares/database/SM-G900I/
The only way you're going to get to download mode with a broken power button is to use a USB Jig......you can get them for pocket change off eBay......
http://i.imgur.com/rVnFwJM.jpg