Hi, i have brick my Nexus 4, is a softbrick. i tried alot of different method to save it, but most of the method need to enable usb debugging, but i cant even load in to screen, how to enable usb debugging???? any ideas guys?
Turn off your phone, then press VOL Down + power. Phone will boot into fastboot mode. From there you can either flash whatever you want or enter stock recovery by browsing the fastboot menu with the volume keys and selecting an option with the power button.
fabrizziop said:
Turn off your phone, then press VOL Down + power. Phone will boot into fastboot mode. From there you can either flash whatever you want or enter stock recovery by browsing the fastboot menu with the volume keys and selecting an option with the power button.
Click to expand...
Click to collapse
thx for you reply
but unfortunately, i have nothing in my sd card...
Related
Hello everyone
lately i entered to recovery mode through adb but my power button is not working and when i remove the battery and plug it in and turn on the phone trough the charger and the battery it keep booting to recovery mode is there any way to get out of recovery mode without using the power button your help is really appreciated
Doesn't the recovery have a reboot option?
In case, your volume up button might also be stuck. The device can't enter recovery just with the power button.
Either that, or your OS is messed up.
I used adb terminal and enter it by mistake and my volumes button is working but the power button is not
I want to root my yureka but my phone is not connecting to pc..the main issue is when i am going to enable usb debugging..my phone getting reboot everytime..what i do now..plzz help me
[email protected] said:
I want to root my yureka but my phone is not connecting to pc..the main issue is when i am going to enable usb debugging..my phone getting reboot everytime..what i do now..plzz help me
Click to expand...
Click to collapse
Perform a hard reset.
Press and hold Volume up + volume down + power
When phone glows
Keep pressing volume up + volume down keys
You see stock recovery
Now wipe all data
Reboot
Check your problem got resolved or not if not resolved then go-to next method
Install adb drivers
Connect phone in fastboot mode
Volume up press and hold and connect data cable.
See device manager
Device should be shown as adb bootloader interface in android device
Now flash stock rom using ygdp tool in fastboot mode.
Wait for process done.
Now check your problem.
Sure it will be gone
nischait said:
Perform a hard reset.
Press and hold Volume up + volume down + power
When phone glows
Keep pressing volume up + volume down keys
You see stock recovery
Now wipe all data
Reboot
Check your problem got resolved or not if not resolved then go-to next method
Install adb drivers
Connect phone in fastboot mode
Volume up press and hold and connect data cable.
See device manager
Device should be shown as adb bootloader interface in android device
Now flash stock rom using ygdp tool in fastboot mode.
Wait for process done.
Now check your problem.
Sure it will be gone
Click to expand...
Click to collapse
Tq
Hey guys. I just got LG G6 H870 model. Unlocked bootloader without much problems, but issues came later. While being in bootloader I can't do anything, hardware buttons seem to not work. The only way to get out of bootloader is to use "fastboot reboot" command, but that prevents me from getting into custom recovery after flashing it. Only entering download mode works (holding volume up and plugin in usb cable). Non other key combination work until I boot into system.
Can this issue be somehow resolved?
I had similar problem myself with entering recovery more and the reason behind it was that I didn't press the button combo in proper way. what you actually have to do is while you in fastboot mode you press down and hold power button and volume down button. phone reboots after a moment and you should still be holding these keys and when lg logo appears you let go of power button for brief second and then press it back again and then when a prompt on white screen appears just go yes two times and phone shall boot in recovery mode . I had watch a tutorial movie to figure that out. other easy way is just to have adb enabled and reboot it with adb reboot recovery command via USB cable
non.verbal said:
I had similar problem myself with entering recovery more and the reason behind it was that I didn't press the button combo in proper way. what you actually have to do is while you in fastboot mode you press down and hold power button and volume down button. phone reboots after a moment and you should still be holding these keys and when lg logo appears you let go of power button for brief second and then press it back again and then when a prompt on white screen appears just go yes two times and phone shall boot in recovery mode . I had watch a tutorial movie to figure that out. other easy way is just to have adb enabled and reboot it with adb reboot recovery command via USB cable
Click to expand...
Click to collapse
No, because I had G5 and I know the proper way to do that. Problem is I can hold the power button as long as I live and the phone won't reboot, regardless of pressed combination or power button solo.
and the adb command way ?
Well... Nevermind, turns out vol down button isn't working at all.
still good way around is adb reboot recovery
was trying to root my lg stylo 2 Walmart family mobile(t-mobile) and i unlocked the bootloader and installed twrp but it just says no command when i boot into recovery.
Then you didn't flash the recovery properly, it's fairly simple. If you're able to get fastboot (shut off the phone totally, hold Volume Down and plug in the USB cable attached to a computer, it should go into fastboot mode almost instantly, if not then there's an issue someplace).
After that using fastboot with the recovery img file for TWRP:
Code:
fastboot flash recovery (recovery_file).img
Wait, if it says flashing successful then before you do anything else, type the following:
Code:
fastboot reboot (but do NOT press Enter yet)
Get the phone in your hand, still connected to the USB cable, and get your fingers on the Volume Down + Power button but don't put them just yet. Carefully tap the Enter key with a pinky or something to trigger the device reboot, press and hold Volume Down + Power till you see the LG logo, let Power go for a split second (still holding Volume Down) then press Power again and hold it till TWRP loads.
If that doesn't work - and I've done that hundreds of times - there's something going on with your device, perhaps the bootloader isn't truly unlocked - that checkbox in Developer Options doesn't mean it's unlocked, it just means it can be.
Ensure you followed this: https://docs.google.com/document/d/1xRfGs-w2R_54IB8cVtIj3FTmm5GY0W1Yv4SqDhVHZ-Q/edit?usp=sharing
there's a video tutorial floating around here somwhere
Hi,
I have trouble unlocking my A40. It's 2nd piece I own and the problem is the same.
When I follow the steps from this forum;
Go to Developer Settings and enable "OEM Unlock" option
Power off the device and boot in download mode
In download mode, you will see the long press and volume up option to unlock the bootloader
Unlock the bootloader. That will wipe your device so be sure you made a backup of your data
After bootloader unlock, boot up the phone and make sure it is connected to the internet or it will trigger rmm prenormal
Setup the phone without google account and others
Reboot in download mode and flash the recovery and vbmeta images
Boot to TWRP
Format data in TWRP
Flash the Multidisabler zip
Now you can reboot
Click to expand...
Click to collapse
I'm stuck at the 3rd point.
I don't see ANY instruction about Volume UP + Power in download mode. Nor FASTBOOT see my device to run actions with it.
What I see is only "Volume down key + power key for more than 7 secs Cancel (restart phone).
And holding Vol UP + Power doesn't do anything.
How to make this work?
Thanks.
sjiamnocna said:
Hi,
I have trouble unlocking my A40. It's 2nd piece I own and the problem is the same.
When I follow the steps from this forum;
I'm stuck at the 3rd point.
I don't see ANY instruction about Volume UP + Power in download mode. Nor FASTBOOT see my device to run actions with it.
What I see is only "Volume down key + power key for more than 7 secs Cancel (restart phone).
And holding Vol UP + Power doesn't do anything.
How to make this work?
Thanks.
Click to expand...
Click to collapse
You did enable OEM Unlock, correct?
Turn the device completely off, without any cables connected. Keep a USB cable ready that's plugged into your PC.
With the device powered off, hold both Volume buttons, and plug in the USB cable connected to your PC. Do not press Power. You should see a prompt on either a green or blue screen; select the option for Device Unlock Mode.
Finally.
Thank you for making me try for another time