Related
I have chainfire 3d v 3.3 and when i install drivers and put my settings, games arent playing. Please if anybody know how much mhz we have on galaxy 3 i5800 tell me thanks for answer
Sent from my GT-I5800 using XDA App
ChrisTK said:
I have chainfire 3d v 3.3 and when i install drivers and put my settings, games arent playing. Please if anybody know how much mhz we have on galaxy 3 i5800 tell me thanks for answer
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Install chainfire 2.0
Ok i will try it thanks
Sent from my GT-I5800 using XDA App
I have install it but i cant open it and i cant see it in my programs.but it says that it is installed
Sent from my GT-I5800 using XDA App
ChrisTK said:
I have install it but i cant open it and i cant see it in my programs.but it says that it is installed
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
put the ak in the system/app and then reboot. it works with me
check your pm..
i have an overclock and it says that my cpu has 667 Mhz frequency, i tried to increase it but it is full.I did a cpu test with other program and it says that the total score of 3d,2d cpu frequency and others are 1153 so i am confused
ok it works thnx i find it!!!
now it appears in my files, i followed the instructions on how to use but now it dint work on games. I want to play asphalt 5 but i cant... i have to instaill the 2.8 v??? if yes pliz give me a link...and if anyone knows about cpu and mhz tell me please
ChrisTK said:
now it appears in my files, i followed the instructions on how to use but now it dint work on games. I want to play asphalt 5 but i cant... i have to instaill the 2.8 v??? if yes pliz give me a link...and if anyone knows about cpu and mhz tell me please
Click to expand...
Click to collapse
You need oc to at least 1000mhz, recommended 1300mhz or 1200mhz
Cheers
Sent from my i9003 powered by Cyanogenmod 7
but how can i increase it??? i have setcpu and it says 667 MHz scaling conservative 667 max 83 min it dont go up to 667 and i have see phones like mine in this forum that play good cf3d
chainfire isnt playing because i have indroid v 3 honeycomb remix?
ChrisTK said:
but how can i increase it??? i have setcpu and it says 667 MHz scaling conservative 667 max 83 min it dont go up to 667 and i have see phones like mine in this forum that play good cf3d
Click to expand...
Click to collapse
install g3mod 2.3 oc to overclock your phone
G3mod oc is program on kyrillos? And i want to change honeycomb and to install kyrillos rom, i will put the .tar and start flashing to odin or i have to replace froyo 2.2 first?
Sent from my GT-I5800 using XDA App
ChrisTK said:
but how can i increase it??? i have setcpu and it says 667 MHz scaling conservative 667 max 83 min it dont go up to 667 and i have see phones like mine in this forum that play good cf3d
Click to expand...
Click to collapse
Flash another kernel. Use Odin, flash as one package. You can use g3mod or fugumod etc. Any kernel that is oced. Only then can you overclock
Cheers
Sent from my i9003 powered by Cyanogenmod 7
ChrisTK said:
G3mod oc is program on kyrillos? And i want to change honeycomb and to install kyrillos rom, i will put the .tar and start flashing to odin or i have to replace froyo 2.2 first?
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Okok. First, download both kyrillos parts of the rrom. Place them in the same folder, and extract part one. Part two will automatically be extracted with it. Then, open Odin, select ops file, choose tick one package and choose the kyrillos rom that had been extracted. Then flash. If the kernel provided does not support oc, then flash another kernel that supports oc. Flash the kernel thru one package. Use setcpu to configure the CPU speed. Kyrillos 10 is gingerbread, while 9.x is froyo. Your choice, but for gb, only the kernels provided in the cm7 thread can be used.
Cheers
Sent from my i9003 powered by Cyanogenmod 7
Do you know Which is better kyrillos or indroid 4 rom?
Sent from my GT-I5800 using XDA App
indroid 6*
omg i have install kyrillos v 9.5 and g3mod v 2.23 and i overclocked my plone to 1200 mhz and chainfire 3d is still not working and now my plone crashes...
an older version of chainfire should work for you. V2.0 worked for me on my galaxy 3
Sent from my GT-I9003 using xda premium
I have tested all versions... And all arent working. So i installed kyorarom v 5.2 but now when i go to install chainfire3d it says that i havent any free space to my system
Sent from my GT-I5800 using XDA App
Hi, before going to update my phone, i would like to know what are the differences b/w the GB and ICS. What are the minimum requirements to install ICS. Does it work good with 512 RAM & 1GHz processor.
Sent from my XT535 using xda app-developers app
My N7 is freezing in games and I need to restart it.
What can I do ?
More details, please. ROM, kernel, any settings/tweaks being used.
Sent from my Nexus 7 using Tapatalk HD
Rom: Paranoid
Kernel : Trinity (1.3ghz , 446 mhz gpu)
TWRP recovery + multirom
Reinstall the games
razvanwin95 said:
Rom: Paranoid
Kernel : Trinity (1.3ghz , 446 mhz gpu)
TWRP recovery + multirom
Click to expand...
Click to collapse
Trinity @1.7 GPU @766 mc3 and GTA vc work fine. No lag or anything
Sent from my Nexus 7 using xda app-developers app
This is basically a show off thread !!
Here you can post the ANTUTU Benchmark RESULTS of your galaxy tab 2 via a SCREENSHOT !!
Be sure to also write down the following things :
Current ROM
Current KERNEL
ADDONS (if any)
MODS (if any)
CPU or GPU oveclocking (if any )
This thread can also show which combination has the highest overall !!
So far 13810 is the highest score for the GT-P3100 !!
Lets see if you can beat that
So all the best and start showing off you device perfomance :thumbup::thumbup:
NOTE : for people who dont know about antutu bechmark , it is a application available on playstore to calculate you device perfomance !!
Sent from my GT-P3100 using Tapatalk PRO
MY SCORE : 9704
ROM : PAC ROM latest nighly (android 4.3.1 )
KERNEL : Blackhawk's NEXT Kernel
MODS : Pure graphic mod , Pure perfomance mod
No overclocking .
Sent from my GT-P3100 using Tapatalk PRO
My latest on the GT-P5113: 10740
ROM : Cyanogenmod nightly 20131021 (android 4.3.1 )
KERNEL : Dhollmen
MODS : none
CPU set to 300-1200MHz
Device : GT-P3100
My Antutu Score : 12662
ROM : CyanogenMod 10.1.3
KERNEL : Blackhawk NEXT Kernel 2.1.3
NO ADDONS
NO MODS
CPU(OC) : 1350 Mhz
GPU(OC) : 512 Mhz
Device : GT-P3100
My Antutu Score : 11650
ROM : CyanogenMod 10.1.3
KERNEL : Blackhawk NEXT Kernel 2.1.3
NO ADDONS
NO MODS
CPU(OC) : 1200 Mhz
GPU(OC) : 512 Mhz
GT-P3110 CM10.1 Official
Stock Kernel
9475
Sent from my GT-P3110 using xda app-developers app
ROM: CM 11 nightly from March 17
CPU: 1350
GPU: 512
Cpu governor: hotplug
Kernal: AGNi
Sent from my GT-P3110 using XDA Premium 4 mobile app
Device: P3110
ROM: Slimkat latest stable release
CPU: 1.42 ghz
MODS: none
Kernel: Agni
Swyped from my P3110 running SlimKat from the XDA Premium HD app!
Neosaurus said:
Device: P3110
ROM: Slimkat latest stable release
CPU: 1.42 ghz
MODS: none
Kernel: Agni
Click to expand...
Click to collapse
Are you overclocking the GPU at all?
Sent from my GT-P3110 using XDA Premium 4 mobile app
Ryan the Skitzo said:
Are you overclocking the GPU at all?
Sent from my GT-P3110 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Umm, no. How much of a effect would that add?
Sent from my GT-I8190 using XDA Premium HD app
Neosaurus said:
Umm, no. How much of a effect would that add?
Sent from my GT-I8190 using XDA Premium HD app
Click to expand...
Click to collapse
Well, it increases the 3D at least another 600 points if bumped up one in AGNi Control.
Device: SGH-I497 (AT&T)
Running stock Android 4.1.2
AnTuTu score: 16,102
--Ron
dutch_in_seattle said:
Device: SGH-I497 (AT&T)
Running stock Android 4.1.2
AnTuTu score: 16,102
--Ron
Click to expand...
Click to collapse
I thought this was for tab 2's.
Sent from my GT-P3110 using XDA Premium 4 mobile app
Ryan the Skitzo said:
I thought this was for tab 2's.
Sent from my GT-P3110 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
SGH-1497 is the At&T version of the tab 2 .
Sent from my GT-P3100 using Tapatalk
Ryan the Skitzo said:
Well, it increases the 3D at least another 600 points if bumped up one in AGNi Control.
Click to expand...
Click to collapse
I can't seem to find a gpu setting in AGNi control, can you screenshot where it is please?
kunjcool said:
SGH-1497 is the At&T version of the tab 2 .
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Well then. That's a stock score? If so then I wonder what they did to it.
Edit: I see they have the CPU at 1.5 GHz, and I assume that can be OC'd aswell. And here I thought all the Tab2's where on a level field.
Neosaurus said:
I can't seem to find a gpu setting in AGNi control, can you screenshot where it is please?
Click to expand...
Click to collapse
I attached a screen
Sent from my GT-P3110 using XDA Premium 4 mobile app
So close....
P3113
Cyanogen nightly for the 21st
Hotplug
CPU at 1350
GPU at 540
Lmk aggressive
VR scheduler for internal and external
Frandom RNG
Got any tips to bump it up a notch?
Sent from my GT-P3110 using XDA Premium 4 mobile app
How i can overclock the GPU in cm11?
>> Originally Posted by kunjcool View Post
>> SGH-1497 is the At&T version of the tab 2 .
>> Sent from my GT-P3100 using Tapatalk
>> Well then. That's a stock score? If so then I wonder what they did to it.
>> Edit: I see they have the CPU at 1.5 GHz, and I assume that can be OC'd aswell. And here I thought all the Tab2's where on a level field.
Fully stock, no overclocking whatsoever. In fact, as far as I know, there aren't any custom ROMs for the SGH-i497.
The AT&T version of the Tab 2 has different hardware and is much faster than the wifi-only model (or at least, its benchmark scores are much higher). I did a direct stock comparison between the wifi-only and AT&T Tab 2 models, and I posted a topic on this forum about it: http://forum.xda-developers.com/showthread.php?t=2442685
--Ron
dutch_in_seattle said:
>> Originally Posted by kunjcool View Post
>> SGH-1497 is the At&T version of the tab 2 .
>> Sent from my GT-P3100 using Tapatalk
>> Well then. That's a stock score? If so then I wonder what they did to it.
>> Edit: I see they have the CPU at 1.5 GHz, and I assume that can be OC'd aswell. And here I thought all the Tab2's where on a level field.
Fully stock, no overclocking whatsoever. In fact, as far as I know, there aren't any custom ROMs for the SGH-i497.
The AT&T version of the Tab 2 has different hardware and is much faster than the wifi-only model (or at least, its benchmark scores are much higher). I did a direct stock comparison between the wifi-only and AT&T Tab 2 models, and I posted a topic on this forum about it: http://forum.xda-developers.com/showthread.php?t=2442685
--Ron
Click to expand...
Click to collapse
That's quite good , but for a major part of the world especially where there is no at&t (i live in india ) the p51xx and the p31xx are the only choices you see . And i assume that it cant be unlocked right ? And you cant get any custom roms .. You stick with laggy old touchwiz (no offence samsung ) .So you get some you lose some .. That's life (p.s.- sorry for being the philanthropist )
Sent from my GT-P3100 using Tapatalk
Stock 4.3 and stock kernel
danierakes said:
Stock 4.3 and stock kernel
Click to expand...
Click to collapse
Hmm I actually get 20660 on first run. im on archidroid 1.7.3 with boeffla kernel. But the phone seems very snappy and fast and does a great job on multitasking
danierakes said:
Stock 4.3 and stock kernel
Click to expand...
Click to collapse
are you serious i got on 1st run 20712 with OC to 1.6ghz and (-50) undervolt using zzmove performance governor on Boeffla-kernel
2nd run 20631 with OC to 1.6ghz no undervolting using pegasusq speedmod governor
your score seems very impressive without any tweaks, well done my friend.
20604
ArchiDroid 1.7.3 with Yank555 kernel. zzmoove optimal governor.
maej72 said:
are you serious i got on 1st run 20712 with OC to 1.6ghz and (-50) undervolt using zzmove performance governor on Boeffla-kernel
2nd run 20631 with OC to 1.6ghz no undervolting using pegasusq speedmod governor
your score seems very impressive without any tweaks, well done my friend.
Click to expand...
Click to collapse
Yes I tested last nite stock rom and stock kernel....
I am on stock too but i couldn't get more than 18989 .
Sent from my GT-I9300 using xda app-developers app
increatu said:
I am on stock too but i couldn't get more than 18989 .
Click to expand...
Click to collapse
Me,the same 18932
Egorych said:
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Stock or custom kernel?
Lazy to post a screenshot.
First test: 18000+
Second: 19000+
Third: 18701
Meh.
mihaitosca said:
Me,the same 18932
Click to expand...
Click to collapse
Stock, odex System
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 03:35 PM ---------- Previous post was at 03:34 PM ----------
danierakes said:
Stock or custom kernel?
Click to expand...
Click to collapse
Stock odex System and Stock Kernel
Sent from my GT-I9300 using xda app-developers app
Stock , odex ,root , xposed instaler , wanam xposed and that is all
4.3 & stock kernal
Sent from my GT-I9300 using Tapatalk 4
NeatRom 6.1 with stock kernel and modem: 19056
Stock Rom and kernel
Sent from my GT-I9300 using Tapatalk
Hardly worth all the fuss .
A score of 18750 on a six month old 4.2.2 customized rom is my norm .
last 3 18827 18750 18620 that would be with stock kernel as well .
CM10.2 without major modification.
Sent from my GT-I9300 using XDA Premium 4 mobile app
18953 with stock kernel. 20+ with Boeffla and OC.
Try latest boeffela kernel mk6 5.0beta5..u will get high score up to 22000
Sent from my GT-I9300 using XDA Premium 4 mobile app
21393
with stock 4.3 (XXGMJ9) + boeffla kernel 5.1 beta 5
CPU: 1600 MHz / undervolt -100 mV
GPU: 600 MHz / undervolt -100 mV
Governor: pegasusq (default)
19112
with stock 4.3 (XXGMJ9) + boeffla kernel 5.1 beta 5
CPU: 1400 MHz (default) / undervolt -100 mV
GPU: 533 MHz (default) / undervolt -100 mV
Governor: pegasusq (default)