[Q] Need Help CM10 no Sound after modem flash - Galaxy S 4 Q&A, Help & Troubleshooting

Hi all,
I'm a fan of CM and been using M9. When M10 was released, of course I have updated but got issue on signal dropping. I did some research and convinced to update my modem. Using the http://www.sammobile.com firmware checking I got these as latest firmware info:
PDA: I9505XXUGNH8
CSC: I9505OLBGNH2
MODEM: I9505XXUGNH8
With these, I updated my modem to XXUGNH8 using I9505XXUGNH8_MODEM (from DXUBMG5) from http://forum.xda-developers.com/showthread.php?p=50965837. The signal dropping was fixed but the BT and wifi went crazy so I flashed I9505_XXUGNH8_WiFi_FIX. BT and Wifi got fixed but my phone got no sound. The result has forced me go back to my M9 which leads me to in restoring my Nandroid back up using CMW and I got my M9 again. Now with my old M9, I still got no sound to I flashed XXUGNG2 from http://forum.xda-developers.com/showthread.php?t=2192025 but still no sound. So then, I was forced again to flash my original modem, DXUBMG5 from the same thread but still no sound.
I'm ran out of ideas what to do next, maybe install M10 again? Flash new modem? I don't have a good idea now.
Perhaps anyone can guide me.
Here are my phone's current data;
Model: GT-i9505
CM: 11-20140804-SNAPSHOT-M9-jflte
Android: 4.4.4
Baseband:I9505DXUBMG5
Kernel: 3.4.0-cyanogenmod-g433243c [email protected] # 1 Sun Aug 3 22:19:51 PDT 2014
Country: Philippines
Carrier: Globe
Edit:
I'm planning to flash XXUBMH1 based on:
"Old bootloader (no KNOX ) => you need to flash exactly the following LTE modem and no other : XXUBMH1. Otherwise, sound / Wi-Fi may break."
I have checked an I didn't found Samsung knox in my Apps. Any better way to tell if my phone knox?

Okay, it seems that I flashed the modem for phones with knox while mine doesn't have.

Related

[Q] Question About Stock firmware build number

Hi,
A couple of months ago i rooted my Samsung Galaxy Note 3 LTE and now i have decided i wanted to unroot.
I wanted to unroot so i could easily update my phone again through samsung update as it wont let me if phone is rooted.
I went into SuperSU and pressed Full Unroot and rebooted my phone. After reboot i had lost root as planned, but when i tryed updating through
the update on my phone it still said my device was rooted.
I decided i wanted to go back to original factory stock firmware through odin.
I am able to find my firmware but cant find the same build number.
i wanted to ask does the build number change when samsung bring out an update or will my build number always be the same?
Here my phone details
Samsung Galaxy Note 3 LTE
Im on EE
UK
Model number: SM-N5005
Android version: 4.3
Baseband version: N9005XXUDMJ7
Build number: JSS15J.N9005XXUDMJ
Im trying to search the internet for the Original Stock firmware but all im finding on websites (Including this website)
is this firmware
Region: EVR (everything everywhere) UK
PDA: N9005XXUDML3 (different to my Current)
Changelist: 2019540
Android: 4.3
Build date: 12/12/2013
i havent updated since october 2013 due to being rooted and i hope to go to kitkat soon.
Am i able to use this firmware with a different build number?
Thank you for any help.
proberly a silly question but i need to ask before i do something wrong that could have been prevented.
Phoenix2014 said:
Hi,
A couple of months ago i rooted my Samsung Galaxy Note 3 LTE and now i have decided i wanted to unroot.
I wanted to unroot so i could easily update my phone again through samsung update as it wont let me if phone is rooted.
I went into SuperSU and pressed Full Unroot and rebooted my phone. After reboot i had lost root as planned, but when i tryed updating through
the update on my phone it still said my device was rooted.
I decided i wanted to go back to original factory stock firmware through odin.
I am able to find my firmware but cant find the same build number.
i wanted to ask does the build number change when samsung bring out an update or will my build number always be the same?
Here my phone details
Samsung Galaxy Note 3 LTE
Im on EE
UK
Model number: SM-N5005
Android version: 4.3
Baseband version: N9005XXUDMJ7
Build number: JSS15J.N9005XXUDMJ
Im trying to search the internet for the Original Stock firmware but all im finding on websites (Including this website)
is this firmware
Region: EVR (everything everywhere) UK
PDA: N9005XXUDML3 (different to my Current)
Changelist: 2019540
Android: 4.3
Build date: 12/12/2013
i havent updated since october 2013 due to being rooted and i hope to go to kitkat soon.
Am i able to use this firmware with a different build number?
Thank you for any help.
proberly a silly question but i need to ask before i do something wrong that could have been prevented.
Click to expand...
Click to collapse
go to www.sammobile.com download firmware you need flash with odin factory reset should be good to go
MJ7 --> M= 2013 J= October
ML3 --> M=2013 L= December
M= 13ª letter
J= 10ª letter
L= 12ª letter
You can upgrade from MJ7 to ML3 like I made from MJ7 to ML2.
Downgrade from MJ7 for one before not.
Phoenix2014 said:
Hi,
A couple of months ago i rooted my Samsung Galaxy Note 3 LTE and now i have decided i wanted to unroot.
I wanted to unroot so i could easily update my phone again through samsung update as it wont let me if phone is rooted.
I went into SuperSU and pressed Full Unroot and rebooted my phone. After reboot i had lost root as planned, but when i tryed updating through
the update on my phone it still said my device was rooted.
I decided i wanted to go back to original factory stock firmware through odin.
I am able to find my firmware but cant find the same build number.
i wanted to ask does the build number change when samsung bring out an update or will my build number always be the same?
Here my phone details
Samsung Galaxy Note 3 LTE
Im on EE
UK
Model number: SM-N5005
Android version: 4.3
Baseband version: N9005XXUDMJ7
Build number: JSS15J.N9005XXUDMJ
Im trying to search the internet for the Original Stock firmware but all im finding on websites (Including this website)
is this firmware
Region: EVR (everything everywhere) UK
PDA: N9005XXUDML3 (different to my Current)
Changelist: 2019540
Android: 4.3
Build date: 12/12/2013
i havent updated since october 2013 due to being rooted and i hope to go to kitkat soon.
Am i able to use this firmware with a different build number?
Thank you for any help.
proberly a silly question but i need to ask before i do something wrong that could have been prevented.
Click to expand...
Click to collapse
The build number is the firmware that come with. It will not harm your devices as long as the firmware is updated version. If your are updating to KitKat, you will not be able to downgrade to 4.3. Save your EFS file.
Thank you. I managed to find my MJ7 build and used odin and it worked.
but thank you for your comments i have a better undestanding for the future
You can go MJ7 > MK2 and return to MJ7 again also.

Keep restarting after update

Update note 3 smn900p threw klies now all it does is restart over and over how do I unistall go back to old update
stcspiderman said:
Update note 3 smn900p threw klies now all it does is restart over and over how do I unistall go back to old update
Click to expand...
Click to collapse
You have upgraded from which firmware to which firmware ?
Have you tried to do factory reset from stock recovery ?
If you are upgrading from KK to KK, the only possible way to downgrade is through ODIN flashing.
But it might not work if you have upgraded the bootloader (if on N9005 - my device), but N900P I have no idea (might work).
antique_sonic said:
You have upgraded from which firmware to which firmware ?
Have you tried to do factory reset from stock recovery ?
If you are upgrading from KK to KK, the only possible way to downgrade is through ODIN flashing.
But it might not work if you have upgraded the bootloader (if on N9005 - my device), but N900P I have no idea (might work).
Click to expand...
Click to collapse
Not even sure what it upgraded to I du=id do factory reset still samething
stcspiderman said:
Not even sure what it upgraded to I du=id do factory reset still samething
Click to expand...
Click to collapse
in that case, go to samfirmware, and download the latest firmware for N900P, and flash it through ODIN. Actually very seldom update through KIES / Software update (from device) will cause a bootloop, unless during the download, there's a network disruption.
the latest should be NC5 for SPRINT (based on your device you mentioned N900P).
Model: SM-N900P
Model name: GALAXY Note 3
Country: Spint (cdma)
Version: Android 4.4.2
Changelist: 951486
Build date: Tue, 18 Mar 2014 05:18:12 +0000
Product Code: SPR
PDA: N900PVPUCNC5
CSC: N900PSPTCNC5
MODEM: N900PVPUCNC5

[Q] SM-N900T (Exynos) Flashing Custom Roms Etc.

I'm having some trouble getting ROMs to flash TM
Details:
Samsung Galaxy SM-N900T (Exynos)
I've installed firmware:
Model: SM-N900T
Model name: GALAXY Note 3
Country: USA (T-Mobile)
Version: Android 4.4.2
Changelist: 1675747
Build date: Mon, 19 May 2014 12:44:54 +0000
Product Code: TMB
PDA: N900TUVUDNE6
CSC: N900TTMBDNE6
MODEM: N900TUVUDNE6
Downloaded from here: http://www.sammobile.com/firmwares/3/?download=29966
I've installed a Chainfire's Auto-root, which went well, and than installed Teamwin 2.7.0.1 (4.4.2) for my device.
I'm able to boot into recovery and I've backed-up my device, and downloaded a few ROMs from the Note III Exynos threads.
However when I start the installers, they just hang on screen's like: "Mounting partitions" etc.
I see the 'KNOX Counter' recovery bit issues around, but I don't care about this as the phone has a bad IMEI anyways.
Suggestions on what I might be doing wrong? I'm continuing to download other roms to try to get them to flash.
So far I've tried:
Criskelo
Installer says Android 4.3...even though the header says KITKAT 4.4.2!?
Hangs at 10% on installer.​TR ROM V13
Hangs at: "Mounting Partitions"​In both cases I've selected "Perform a Full Wipe" and also used Teamwin "FullWipe" prior to attempting these installs.
I see lots of talk about the modems, down-grading not being possible from > 4.4, etc.
Thanks.
I've successfully been able to flash roms for the SM-N9005 for whatever reason I didn't understand this was possible with some of them.
Some parts remain non-functional but generally it's ok.
jbcholdings said:
I'm having some trouble getting ROMs to flash TM
Details:
Samsung Galaxy SM-N900T (Exynos)
I've installed firmware:
Model: SM-N900T
Model name: GALAXY Note 3
Country: USA (T-Mobile)
Version: Android 4.4.2
Changelist: 1675747
Build date: Mon, 19 May 2014 12:44:54 +0000
Product Code: TMB
PDA: N900TUVUDNE6
CSC: N900TTMBDNE6
MODEM: N900TUVUDNE6
Downloaded from here: http://www.sammobile.com/firmwares/3/?download=29966
I've installed a Chainfire's Auto-root, which went well, and than installed Teamwin 2.7.0.1 (4.4.2) for my device.
I'm able to boot into recovery and I've backed-up my device, and downloaded a few ROMs from the Note III Exynos threads.
However when I start the installers, they just hang on screen's like: "Mounting partitions" etc.
I see the 'KNOX Counter' recovery bit issues around, but I don't care about this as the phone has a bad IMEI anyways.
Suggestions on what I might be doing wrong? I'm continuing to download other roms to try to get them to flash.
So far I've tried:
Criskelo
Installer says Android 4.3...even though the header says KITKAT 4.4.2!?
Hangs at 10% on installer.​TR ROM V13
Hangs at: "Mounting Partitions"​In both cases I've selected "Perform a Full Wipe" and also used Teamwin "FullWipe" prior to attempting these installs.
I see lots of talk about the modems, down-grading not being possible from > 4.4, etc.
Thanks.
I've successfully been able to flash roms for the SM-N9005 for whatever reason I didn't understand this was possible with some of them.
Some parts remain non-functional but generally it's ok.
Click to expand...
Click to collapse
Hello, Were you able to solve this? - Do the Roms for the N900 Work As they Should?
golfcartguy said:
Hello, Were you able to solve this? - Do the Roms for the N900 Work As they Should?
Click to expand...
Click to collapse
I ended up flashing ROMs for the SM-N9005 and they worked fine (mostly) some didn't get WiFi etc.
That was before I ran into Samsungs friendly and thus-far unfixable Note 3 Region Lock
The 900T is not an Exynos device... also lucky you there is a whole forum dedicated to the 900T device.
Just go to the T-Mobile section, all roms there should work flawlessly

modem not working after upgrading from 4.4.2 to 5.0.1

CarlM34 said:
I am assuming that all flashed OK? If so did you flash the rom straight after to get the Stock OB8 kernel? If ALL has flashed fine in odin and you have installed Omega 41 then wifi should work.
Click to expand...
Click to collapse
First i flashed stock 4.4.2 modem from sammobile. (to make sure nothing is bricked after 100 times of failing to get wifi working)
It works oob without flashing any baseband (i think ufnc9 comes with this rom)
details rom here:
Model GT-I9505
Model name GALAXY S4 LTE Netherlands
Version Android 4.4.2
Product code PHN
PDA I9505XXUGNG8
CSC I9505PHNGNF1
Then i flashed
Model GT-I9505
Model name GALAXY S4 LTE Netherlands
Version Android 5.0.1
Product code PHN
PDA I9505XXUHOB7
CSC I9505PHNHOB2
System --> Setting still shows baseband UFNC9.
Im using openrecovery-twrp-2.8.6.0-jfltexx (but after installing it and reboot to recovery it shows 2.8.5.0.
(flashed with Odin V3.10 under the AP section, right? i believe im doing evrything ok, have flashed alot of roms on this phone before)
(in the earlier try, current state is clean stock 5.0.1 rom with root and twrp 2.8.5.0, no working wifi)
I peformed all steps here exactly.
http://forum.xda-developers.com/showpost.php?p=58785261&postcount=1
With these basebands:
http://forum.xda-developers.com/showpost.php?p=50965837&postcount=2627

Need help with csc after flashing firmware

Ok so I recently got a Unlocked Galaxy S7 edge (SM-G935FSZL) I thought that it was just a SM-G935F but using 'Phone info' I get the extra szl. On to my dilemma, I was attempting root when I soft bricked my phone into a bootloop. I flashed a firmware which I thought was from the U.K waited for a bit then rooted successfully and everything has been fine or so I thought. I noticed it changed from LTE to 4g after flashing the firmware, I didn't pay it any mind. But now my speeds are extremely slow unless Im outdoors which was NOT happening before. I cant seem to connect to a galaxy vr device that was given to me brand new. And I dont have any CSC, Im guessing thats where my problem lies? I would love any help and advice to fix this and get my phone back up and running how it should be. I will give as much info as possible. I'm in the United States and T-Mobile is my carrier.
Bootloader Version:
G935FXXU1APB6
PDA Version:
G935FXXU1APB6
CSC Version:
______________
Baseband Version:
G935FXXU1BPHJ
Latest Firmware:
G935FXXS1BPJB/G935FUUB1BPH1/G935FXXU1BPHJ
Kernel Version:
3.18.14-7162483
http://forum.xda-developers.com/showthread.php?t=3392957

Categories

Resources