Update note 3 smn900p threw klies now all it does is restart over and over how do I unistall go back to old update
stcspiderman said:
Update note 3 smn900p threw klies now all it does is restart over and over how do I unistall go back to old update
Click to expand...
Click to collapse
You have upgraded from which firmware to which firmware ?
Have you tried to do factory reset from stock recovery ?
If you are upgrading from KK to KK, the only possible way to downgrade is through ODIN flashing.
But it might not work if you have upgraded the bootloader (if on N9005 - my device), but N900P I have no idea (might work).
antique_sonic said:
You have upgraded from which firmware to which firmware ?
Have you tried to do factory reset from stock recovery ?
If you are upgrading from KK to KK, the only possible way to downgrade is through ODIN flashing.
But it might not work if you have upgraded the bootloader (if on N9005 - my device), but N900P I have no idea (might work).
Click to expand...
Click to collapse
Not even sure what it upgraded to I du=id do factory reset still samething
stcspiderman said:
Not even sure what it upgraded to I du=id do factory reset still samething
Click to expand...
Click to collapse
in that case, go to samfirmware, and download the latest firmware for N900P, and flash it through ODIN. Actually very seldom update through KIES / Software update (from device) will cause a bootloop, unless during the download, there's a network disruption.
the latest should be NC5 for SPRINT (based on your device you mentioned N900P).
Model: SM-N900P
Model name: GALAXY Note 3
Country: Spint (cdma)
Version: Android 4.4.2
Changelist: 951486
Build date: Tue, 18 Mar 2014 05:18:12 +0000
Product Code: SPR
PDA: N900PVPUCNC5
CSC: N900PSPTCNC5
MODEM: N900PVPUCNC5
Related
Hi,
A couple of months ago i rooted my Samsung Galaxy Note 3 LTE and now i have decided i wanted to unroot.
I wanted to unroot so i could easily update my phone again through samsung update as it wont let me if phone is rooted.
I went into SuperSU and pressed Full Unroot and rebooted my phone. After reboot i had lost root as planned, but when i tryed updating through
the update on my phone it still said my device was rooted.
I decided i wanted to go back to original factory stock firmware through odin.
I am able to find my firmware but cant find the same build number.
i wanted to ask does the build number change when samsung bring out an update or will my build number always be the same?
Here my phone details
Samsung Galaxy Note 3 LTE
Im on EE
UK
Model number: SM-N5005
Android version: 4.3
Baseband version: N9005XXUDMJ7
Build number: JSS15J.N9005XXUDMJ
Im trying to search the internet for the Original Stock firmware but all im finding on websites (Including this website)
is this firmware
Region: EVR (everything everywhere) UK
PDA: N9005XXUDML3 (different to my Current)
Changelist: 2019540
Android: 4.3
Build date: 12/12/2013
i havent updated since october 2013 due to being rooted and i hope to go to kitkat soon.
Am i able to use this firmware with a different build number?
Thank you for any help.
proberly a silly question but i need to ask before i do something wrong that could have been prevented.
Phoenix2014 said:
Hi,
A couple of months ago i rooted my Samsung Galaxy Note 3 LTE and now i have decided i wanted to unroot.
I wanted to unroot so i could easily update my phone again through samsung update as it wont let me if phone is rooted.
I went into SuperSU and pressed Full Unroot and rebooted my phone. After reboot i had lost root as planned, but when i tryed updating through
the update on my phone it still said my device was rooted.
I decided i wanted to go back to original factory stock firmware through odin.
I am able to find my firmware but cant find the same build number.
i wanted to ask does the build number change when samsung bring out an update or will my build number always be the same?
Here my phone details
Samsung Galaxy Note 3 LTE
Im on EE
UK
Model number: SM-N5005
Android version: 4.3
Baseband version: N9005XXUDMJ7
Build number: JSS15J.N9005XXUDMJ
Im trying to search the internet for the Original Stock firmware but all im finding on websites (Including this website)
is this firmware
Region: EVR (everything everywhere) UK
PDA: N9005XXUDML3 (different to my Current)
Changelist: 2019540
Android: 4.3
Build date: 12/12/2013
i havent updated since october 2013 due to being rooted and i hope to go to kitkat soon.
Am i able to use this firmware with a different build number?
Thank you for any help.
proberly a silly question but i need to ask before i do something wrong that could have been prevented.
Click to expand...
Click to collapse
go to www.sammobile.com download firmware you need flash with odin factory reset should be good to go
MJ7 --> M= 2013 J= October
ML3 --> M=2013 L= December
M= 13ª letter
J= 10ª letter
L= 12ª letter
You can upgrade from MJ7 to ML3 like I made from MJ7 to ML2.
Downgrade from MJ7 for one before not.
Phoenix2014 said:
Hi,
A couple of months ago i rooted my Samsung Galaxy Note 3 LTE and now i have decided i wanted to unroot.
I wanted to unroot so i could easily update my phone again through samsung update as it wont let me if phone is rooted.
I went into SuperSU and pressed Full Unroot and rebooted my phone. After reboot i had lost root as planned, but when i tryed updating through
the update on my phone it still said my device was rooted.
I decided i wanted to go back to original factory stock firmware through odin.
I am able to find my firmware but cant find the same build number.
i wanted to ask does the build number change when samsung bring out an update or will my build number always be the same?
Here my phone details
Samsung Galaxy Note 3 LTE
Im on EE
UK
Model number: SM-N5005
Android version: 4.3
Baseband version: N9005XXUDMJ7
Build number: JSS15J.N9005XXUDMJ
Im trying to search the internet for the Original Stock firmware but all im finding on websites (Including this website)
is this firmware
Region: EVR (everything everywhere) UK
PDA: N9005XXUDML3 (different to my Current)
Changelist: 2019540
Android: 4.3
Build date: 12/12/2013
i havent updated since october 2013 due to being rooted and i hope to go to kitkat soon.
Am i able to use this firmware with a different build number?
Thank you for any help.
proberly a silly question but i need to ask before i do something wrong that could have been prevented.
Click to expand...
Click to collapse
The build number is the firmware that come with. It will not harm your devices as long as the firmware is updated version. If your are updating to KitKat, you will not be able to downgrade to 4.3. Save your EFS file.
Thank you. I managed to find my MJ7 build and used odin and it worked.
but thank you for your comments i have a better undestanding for the future
You can go MJ7 > MK2 and return to MJ7 again also.
Help needed!!!I bought s4 from England and then rooted it and installed custom on it(black edition). Now the problem is I want to remove root and install official firmware. Kindly please guide me what should I do so that I don't brick/damage my device. Thanks in advance
Aqib Farooq said:
Help needed!!!I bought s4 from England and then rooted it and installed custom on it(black edition). Now the problem is I want to remove root and install official firmware. Kindly please guide me what should I do so that I don't brick/damage my device. Thanks in advance
Click to expand...
Click to collapse
Hi ,
Just go to
http://www.sammobile.com/firmwares/
Select the official firmware you want ( UK or your country) follow instructions given
Example
http://www.sammobile.com/firmwares/3/?download=34317
Model: GT-I9505
Model name: GALAXY S4 LTE
Country: United Kingdom
Version: Android 4.4.2
Changelist: 2309103
Build date: Wed, 23 Jul 2014 10:16:57 +0000
Product Code: BTU
PDA: I9505XXUGNG8
CSC: I9505BTUGNG2
MODEM: I9505XXUGNG8
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
In the case above , after you flash it if you wish to gain root again towelroot will not work (yet) so if you root knox bit will be trip , maybe is already tripped as you have a custom rom now
I've already downloaded this firmware I9505XXUBMGA (4.2.2) : Stock GT-i9505 ROM from sammobile. Can I use this firmware. And then updated it afterwards ota or from kies?
Aqib Farooq said:
I've already downloaded this firmware I9505XXUBMGA (4.2.2) : Stock GT-i9505 ROM from sammobile. Can I use this firmware. And then updated it afterwards ota or from kies?
Click to expand...
Click to collapse
Hi ,
It depends in what firmware you had last , if you had 4.2.2 you can , if you had 4.3 or 4.4.2 yon can not , odin will not let you downgrade
Once you flash stock firmware and your status is stock you can upgrade from kies or ota
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
mehrdady said:
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
Click to expand...
Click to collapse
1. Flashing the correct firmware for your device via ODIN DON'T trig KNOX counter. Be relaxed.
2. One of the best method for know your CSC (code of country) is rebooting in STOCK RECOVERY and look close the text: "Applied the CSC-code: XXX" like in the pic attached.
mehrdady said:
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
Click to expand...
Click to collapse
- Flashing the stock firmware via Odin will not trip the Knox counter, nor erasing your data.
- To find and download the correct firmware for your device:
Open Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'.
The latest one will be on the top of the list.
vndnguyen said:
- Flashing the stock firmware via Odin will not trip the Knox counter, nor erasing your data.
- To find and download the correct firmware for your device:
The latest one will be on the top of the list.
Click to expand...
Click to collapse
Thank you for your help i installed the app and checked it the part you told (firmware browser)
at the top was a firmware with this info:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 1955971
Build date: Tue, 28 Oct 2014 12:20:40 +0000
Product Code: XSI
PDA: N9005XXUGNJ2
CSC: N9005OJVGNH2
MODEM: N9005XXUGNG1
Im downloading it and going to flash it using the instruction written on the sammobile website, will flashing this firmware erase my apps? and I have seen some people that after using this method of flashing their device has lost connection of wifi and cell connection, what if I get this problem too?
mehrdady said:
Thank you for your help i installed the app and checked it the part you told (firmware browser)
at the top was a firmware with this info:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 1955971
Build date: Tue, 28 Oct 2014 12:20:40 +0000
Product Code: XSI
PDA: N9005XXUGNJ2
CSC: N9005OJVGNH2
MODEM: N9005XXUGNG1
Im downloading it and going to flash it using the instruction written on the sammobile website, will flashing this firmware erase my apps? and I have seen some people that after using this method of flashing their device has lost connection of wifi and cell connection, what if I get this problem too?
Click to expand...
Click to collapse
Flashing a stock firmware via Odin will not erase your apps.
I personally doesn't face with wifi and cell connection.
Hi team,
Need help, anyone have a stock firmware for S4 lollipop 5.0.1? I soft bricked my phone stuck at boot logo. I can't go to safe mode, already tried wiping data/ factory reset but still stuck.
Last update I did from Kitkat to Lollipop is using Kies3, but my phone is rooted so I'm having trouble getting Kies3 to support my phone. (Givevs me message saying not supported, but it is the same Kies I used to update to Lollipop)
Firmware I need is the Globe, 5.0.1 (If you have higher, the better)
Phone Samsung GALAXY S4
Model GT-I9505
PDA Version I9505XXUHOJ2
CSC Version I9505OLBHOH1
PHONE Version I9505XXUHOJ2
Region GLB
Country Philippines (Globe)
Build Date 08.10.2015
Changelist 5978264
OS Lollipop
OS Version 5.0.1
Please help..
Brothers i flashed below stock debloted rom via odin 3 days back
Device: Galaxy Note 4 SM-N910C
Build: Android 5.1.1
Build date: Fri Dec 11 18:50:38 KST 2015
Changelist: 6035384
Product Code: (BTU) (United Kingdom Unbranded)
PDA: N910CXXU2COL2
CSC: N910COXA2COJ5
MODEM: N910CXXU1COJ5
BOOTLOADER: N910CXXU2COL2
KERNEL: STOCK
then i flashed [M 6.0.1_r13] ResurrectionRemix v5.6.3
but did not take any TWRP backup of 5.1.1
but their are many problems in Marshmallow so i want to downgrade to 5.1.1
can u help me guys with simple process
i also have twrp backup of 4.4.4 which i took 5 months ago that should have my efs file
now what should i do to downgrade?
PS: i am thinking to do
1st restore 4.4.4 twrp backup
2nd then immediately flash stock 5.1.1 via odin
is it correct to do?
i dont want to take any wrong steps now so asking u guys.
HELP realy appreciated
sorry for trouble in reading my long post and for my bad english
You can't downgrade to kitkat 4.4.4 because the bootloader in 5.1.1 is locked .but you can flash android 5.1.1 ...
go to kies and do recovery fw installation
Just flash 5.1.1 Stock Rom for 910C via Odin.
ROM: Here
Nando14sunny said:
Just flash 5.1.1 Stock Rom for 910C via Odin.
ROM: Here
Click to expand...
Click to collapse
yo done same and got success but why many peoples are telling to take efs backup of 5.1.1
see this thread also
http://forum.xda-developers.com/note-4/help/fix-note4-exynos-n910c-bootloop-problem-t3312161
anyways thanks
SM-N910P compatible?
Can the 5.1.1 stock rom for the 910C listed above also work with the Sprint SM-N910P? Thanks
PostalTrucker said:
Can the 5.1.1 stock rom for the 910C listed above also work with the Sprint SM-N910P? Thanks
Click to expand...
Click to collapse
no it can not it is only for international version sm-n910c
Hi..my note 4 910c is shutting down automatically..
I folowed few instructions and found thats happening after System update to marshmallow
I have found and went to safe mode uninstall /disabled some apps which I don't use and after updating I have wiped cache.
After doing all this I have found that my phone has not shut down of 2 hours of usage
benefits of doing that is I found it is charging better thwn before..
Any idea or suggestions?
If you have installed the latest OS updates for Marshmallow. You can no longer downgrade from Marshmallow to Lollipop.