Hi everyone..
I have Motorola defy (MB 525) Green lens
few days ago ...there is probleme with battery shows question mark and won't charge ...
im using wajkwiui about 2years ....
sometimes i flashing a sbf file for some errors " renew my phone hhhh"
The Probleme:
the usb port do not raconize !!! battery won't charge !!
when i using " McGyver " the battery change to 100% !!!
and if not it shows question mark
when i using the usb cable only shows led whit color !
i have reset the phone i have flash a sbf gile then i rooted my phone .... and install wjakwiui ....
and the same probleme and some times show message " Battery not detected ... insert the original battery ..."
Plz help Me!
i think that the usb port making the probleme!!
...im sorry for my english hhhh!!
I have Same Problem.
Nothing to do, I had the same problem, anyway, Quarx put his custom battery driver on CM11.
Charge your battery with an universal charger, and flash CM11.
Once you flashed it, download Root Browser then go to /system/bootstrap/2nd-boot and edit the cmdline file, change the "cpcap_charger_enabled=n" line to " cpcap_charger_enabled=y" reboot your phone and you'll have the custom driver active so you can charge your phone like before, note that it's not that accurate as the original driver but at least your defy will keep alive.
soooooo thanks
worked for me
i can't find bootstrap folder
hi
i can't find this folder bootstrap !!!
/system/bootstrap/
thers only
/system/bootmenu
i found this file cmdline on this folder
/system/bootmenu/2nd-boot
and there is not this command lines .... just two lines ...
i can't find this ...
cpcap_charger_enabled=n
please can you give instruction how you get this ....
i think will work with me hhh
notice !! my phone alive now im with cm-11-20140120-NIGHTLY-mb526
from
quarx2k . r u/archive/cm11.0-nightly-defy+/
remove spaces
Flash rom before 1/10/2014
I used Build`s 8/2014
The 08's builds ...Failed to install i have try multi one ..
i will keep trying to slove this
thanks ...!!!
Related
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
if you can access bootloader
a) if you dont have hardspl installed already, install it or you're going to be screwed soon.
if you can access bootloader, pop the nbf file onto your microsd <2gb as HERMIMG.NBH insert it into the phone and follow onscreen instructions.
flashing via SD is always a safer bet anyway.
Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??
I think I've got same problem..
It can't run again after splash screen..
Hi , maybe this is not the first time that some one have the same problem but i have try alot to found a solution and i didnt found
i have a HTC p6500 and it was working perfect untill i download a rom from this forum and i install it in the htc , after that when the device restart i get the boot load screen with 4 colors and in it its writen
sedn100
spl-1.08.000
cpld-6
serial *
and im stuck in that bootloader , each time i start the device i only get that 4 colors
when i try to connect the drvice to the computer the word serial at the butt of the device change to USB , so i downloaded another room and i try to install it but when it reach to 1% it say **error 294 invalid vender id** and the device restart and go bac to bootloader mood
so any one could help me plz cus i dont know wat to do
and thanx alot
hello ,
yesterday i tried to flash my omnia II for the first time , and it seems that it will be the last one
i made every single step as it should be , i was upgrading to the original version I8000NXXJB3 ... my pc operating system is win xp ..
but after starting it stucks while downloading img to ram ... and i tried to reflash it but it used to stuck on different values every time like 41% , 39 % , 75 % ... and it reached once 99% and then stopped .
now for sure when i turn it on it shows the ( download mode ) screen but nothing else , and i couldnt format it using buttons method as it has no operating system of course .....
any help please ? and is there another method to flash the rom ( as to use the sd card ) ?
Are you using octans and the correct drivers for flashing? try downloading a different rom!! for example.. maybe you´re trying with jd5 try with jh2!! or maybe.. try flashing 1 thing!! Start with eboot, then csc, then pda, and maybe if you wanna try the phone!! sometime i have the same problem.. the solution was veeery simple!!! Don´t worry!!
.... $$$
na wnoooooo .....
hey guys im new here so bare with me...
i have a problem with defy , the story start with miui that i try to install and the cable went off during the install, since than i cant flash .
the battery is dead and i couldn't go to boot loader, somehow i mange to turn the defy on with the McGravier method , and the only screen i can see is the boot loader , the rsd lite revile the phone but any flash that i try to install finish with error code like this, error verifing code group 33/39 and ect' .
i try any sbf rom from virsion 2.1 to 2.21, 2.2.2, 2.3.3, 2.3.4 and i try to install and flash the phone on any windows xp vista and win7 ,and on a diffrent pc ,why its always finish with fail in the rsd program its mange to go to 100% and than its fail all the time.
plz help im hopeless
thanks
Where did you buy your phone?.
What was your original rom?
hey , i buy my defy in israel and the virsion was 2.1 with modifiction of opertor like virizon - in israel its call cellcom , what to do ? what version i need to install ?
help anyone ?
I know you said that you cant get any other screen but...
Can you get into recovery menu?
Remove Battery, Press VOLUME DOWN and POWER and then plug in the battery. ( HOLD THE BUTTONS!) after a while , an android with a warning triangle shoud appear.. maybe try wiping ? ( if you can )
hi ; thanks for the help man , but i cant get into recovery mode i try your way and nada
i found the rom that i try to flash for the first time for miui maybe it will help u ?
JRDNEM_U3_3.4.2_177-005_NORDIC_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTNORD_P003_A001_HWp3_Service1FF.sbf.gz.crdownload
hello guys
after spending hours and days trying to fix it i have no more ideas ...
Several Problems:
Just without any reasons one day i was not able to start the tablet ....
only the boot screen was shown and nothing more...
so i flashed it with a stock rom , doesn't remember the version after booting it shows the message : all pre-install processes complete ! enter your passwort :
.
i ve never entered a passwort so it makes no sence for me ....
after that i tried to install another stock rom: copied an update.zip to the xternal sd card , but when i start the recovery it only shows the green android guy with exclamation mark ..
so far so good no way to enter android because of the missing passwort, no access to recovery mode , to load the update.zip doesn t work , also hard reset doesn t work ...
maybe somebody can helb me how to use the update.zip with the external sd card correctly ... i think his must be the right way ..???
or is there any possibility to install custom recovery without entering android ?
hope somebody can help ..
thank guys
regards