Is there a way to install amarullz script to have more internal Storage while ur rom is CM9 or CM11? ?
DEVICE
Samsung Galaxy S5360
Rom: Cyanogenmod 7.2
kernel: [email protected]
Hit thanks if i helped you.
seballo321 said:
Is there a way to install amarullz script to have more internal Storage while ur rom is CM9 or CM11? ?
DEVICE
Samsung Galaxy S5360
Rom: Cyanogenmod 7.2
kernel: [email protected]
Hit thanks if i helped you.
Click to expand...
Click to collapse
You can use Link2sd instead
Sent from my GT-S5360 using XDA Free mobile app
S2E on CM 11
You should use S2E_mod by @psyke83 because Link2SD, App2SD, Data2SD, etc. may conflict on CM 11.
Fyi,amarullz script does work on both CM 9 and 11
Tested it on CM 9 beta 5 and unoffocial as well as CM 11 nightly though as they.are still indev,the wifi will not function proper(there is fxr wifi fix,but only a temporary solution)and various bugs but it still works.
Related
How to make app2sd work in CyanogenMod 9 nightlies?
I have 1gb ext partition and it works with any other rom.
nameless517 said:
How to make app2sd work in CyanogenMod 9 nightlies?
I have 1gb ext partition and it works with any other rom.
Click to expand...
Click to collapse
Use Link2SD from the Play store or see the A2SD discussion for NexusHD2, as I assume the solutions would be largely the same as for the CM9 nightlies.
I've tried to flash 40ad2sdx-a2Recovery.zip but it didn't work out.
Thank you =)
Hi, I have been using a Quarx version of CM10 for a while. I'm having problems with the battery drain, so I want to downgrade to cm 7.2.
Now I'm a bit confusing about how I can do it safely. So I want to ask you! Thanks for your attention.
I'm using Kernel: [email protected]#1
CyanogenMod version: 10-20120924-NIGHTLY-mb525
I'm not sure If I must change the kernel because i'm using a gb kernel.
Thanks again!
just format as ext3 and flash as always..wipe dalvik/cache..
pakarbu said:
just format as ext3 and flash as always..wipe dalvik/cache..
Click to expand...
Click to collapse
I'll try that. I only wanted to be sure that I'm using the correct kernel.
Thanks a lot
I can't find the option to change to EXT3 in Tools. Why arent it there?
There's only option to Share SD Card, drivers, system, data...
Miguemiguemigue said:
Hi, I have been using a Quarx version of CM10 for a while. I'm having problems with the battery drain, so I want to downgrade to cm 7.2.
Now I'm a bit confusing about how I can do it safely. So I want to ask you! Thanks for your attention.
I'm using Kernel: [email protected]#1
CyanogenMod version: 10-20120924-NIGHTLY-mb525
I'm not sure If I must change the kernel because i'm using a gb kernel.
Thanks again!
Click to expand...
Click to collapse
you can do nothing just flash the cm7-130301 nightly
I tryed cm7-121008 stable no 130301 nightly yes
to make it easier, use aroma wiper..search it on app and theme section..
pakarbu said:
to make it easier, use aroma wiper..search it on app and theme section..
Click to expand...
Click to collapse
Good, I'll see and tell if that works for me!
The tool to format in ext3 is located into the bootmenu: format there and then switch to recovery without rebooting,wipe dalvik and flash your rom
Sent from my MB525 using xda app-developers app
hi,
i want to ask who is the more stable roms for Ideos X5? (not the pro)
i want a stable and fast rom, and if it is possible not take all the battery.
for fast rom it is better to stay in android 2.3? or i can have and good results with 4.x?
the 4.x roms need more memory from the 2.3?
Thanks for any answer
You have here all you want, please take some time and read, all depend what do you want from your mobile, if you want play, or any navigate
http://forum.xda-developers.com/showthread.php?t=2166353
Using Tapatalk 2
Based on each version of Android:
Gingerbread - CM 7 ezet's rom
Ice Cream Sandwich- Aurora dzo's or AuroraSP (tweaked of Aurora)
Jelly Bean - CM 10 blefish's rom
My 2 cents
pl4t!n said:
You have here all you want, please take some time and read, all depend what do you want from your mobile, if you want play, or any navigate
http://forum.xda-developers.com/showthread.php?t=2166353
Using Tapatalk 2
Click to expand...
Click to collapse
thanks
in the past i have try this:
CyanogenMod 7.2 for Ideos X5 (u8800) by exet
http://forum.xda-developers.com/showthread.php?t=1527745
and it is working but i want to try and newer roms.
So today i have try the AuroraSP.
I have recovery 5.0.2.8 (and i have try with 5.0.2.7)
I have make full wipe (data, cache, dalvik)
I have install AuroraSP V4R
but then in the boot screen i have see only the huawei logo. The rom not start.
I have do something wrong?
there is a problem to switch from ezet CM72 to auroraSP?
i have try to go and to Aurora ICS 4.0.4 v5 but the problem remain.
thanks
dark_vader said:
Based on each version of Android:
Gingerbread - CM 7 ezet's rom
Ice Cream Sandwich- Aurora dzo's or AuroraSP (tweaked of Aurora)
Jelly Bean - CM 10 blefish's rom
My 2 cents
Click to expand...
Click to collapse
hi
thanks for this, i have use ezet's CM 7.2 and it is good.
I have see that you have use AuroraSP (in your signature).
How about speed and battery about ezetCM7 and AuroraSP? it is similar or not?
Also you have any idea what is wrong in my previous post?
thanks a lot
Hello, first of all you should install official 2.3 gingerbread from Huawei and root it. After that you should be able to install aurora without problem.
There is a thread on the developer section on how to install and root official Rom.
Sent from my U8800 using xda app-developers app
blueicegr said:
hi
thanks for this, i have use ezet's CM 7.2 and it is good.
I have see that you have use AuroraSP (in your signature).
How about speed and battery about ezetCM7 and AuroraSP? it is similar or not?
Also you have any idea what is wrong in my previous post?
thanks a lot
Click to expand...
Click to collapse
Speed is better on Aurora that's for sure and about battery i don't remember well i don't have CM7 and haven't tried anymore more than 1 year but drains a little more if you use 2G and turn off Wifi and then you can save battery.
If must have GB on your phone after that you should install any other custom roms since from CM7 to CM 10 and of course Aurora too. Remember when update from different kernel please format system, data and cache with together all 3 wipes.
dark_vader said:
Speed is better on Aurora that's for sure and about battery i don't remember well i don't have CM7 and haven't tried anymore more than 1 year but drains a little more if you use 2G and turn off Wifi and then you can save battery.
If must have GB on your phone after that you should install any other custom roms since from CM7 to CM 10 and of course Aurora too. Remember when update from different kernel please format system, data and cache with together all 3 wipes.
Click to expand...
Click to collapse
thanks for the answer.
What version of recovery you have use?
i have try 5.0.2.7 and 5.0.2.8 and 5.5.0.4 but not luck.
it is working when i install CM72 but not in aurora.
i have wipe system data cache but still not luck. In the boot i have just see the huawei logo.
any idea?
If you have ezet's Rom then you are at .32 kernel and need to install official Rom first. Just read my previous post. If not then sorry..
Sent from my U8800 using xda app-developers app
gegkikas said:
If you have ezet's Rom then you are at .32 kernel and need to install official Rom first. Just read my previous post. If not then sorry..
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
oh, yea, i have do this and everything is ok now
thanks
Nice
Sent from my U8800 using xda app-developers app
I have built this CM 11.0 android 4.4 ROM for vibrant from the CM sources.
Please make a nandroid back up before you flash this ROM
ROM
http://www.mediafire.com/?r6apmvi3k6fj4fw
Gapps
http://www.mediafire.com/?1tn37ciga907y4s
:thumbup:
Put it in the dev section as unofficial.
Sent from my SGH-T959 using xda app-developers app
Doesn't work well, restored backup
Thanks, will try later
sada23 said:
I have built this CM 11.0 android 4.4 ROM for vibrant from the CM sources.
]
Click to expand...
Click to collapse
Just one question.
There are some devices of galaxy S family with Encryption Unsuccessful error and broken smartphone SD card
For working with some soft correctly it is need to have patch for internal and external sd swap.
But on 4.4 patching is impossible. All changes must be done in kernel ramdisk.
Is it possible to have flashable Vibrant kernel of your Un CM11.
And maybe you can make special version of your kernel with swapper SD, like it was done in Neat Kernel foe Captivate
How come when I flash a new Rom, the error "unfortunately the process android.process.media has stopped" comes up like every 5-10 seconds. Is there a way to fix this??
hello all xda members
I need little advice on my mobile phone
I buy a new galaxy note 2 n7100 firmware N7100XXUENC3 on android 4.3
now I want to swap my internal 2 external SD I read that I need a custom kernel or rom with Init.D support
but I cant a kernel to work on my mobile device what I have try
Perseus Kernel (only black screen after Samsung logo)
speedwizz kernel N2 (works but I get kernel panic random reboots)
kernel Asylum (not work black screen)
roms I have try to swap sd bot non its working
miui v5
omega roms
cayanogenmod 11
Hurricane v12
but witch kernel or rom need I to use that work and swap my sd i need some extra memory
Devil Kernel has init D support, try it
McLaren__F1 said:
Devil Kernel has init D support, try it
Click to expand...
Click to collapse
I have it running now only I cant see my storage using pc with this kernel
and no swap support I cant swap my external to internal SD
I have try over 10 guides but not 1 its working
did you know a way to swap my SD card
Perseus is only for 4.1.2 not 4.3. Agni kernel has the memory swap built in so that is your best bet. Have a look at foldermount as well, that is good for moving files to ext so card
Sent from my GT-N7105 using Tapatalk