Database Users

[GUIDE] Recover your bricked Bell (or other download mode disabled SGS)

I went and bricked my SGS again and thought great.. time to exchange again right? Wrong.
My Bell SGS is one of those cute ones that has no download mode. I thought all hope was lost. It wasn't.
It's simple, adb reboot recovery works fine. But trying to adb is a pain in the ass. Easy solution.
1) Get the one click root/unroot tool: http://forum.xda-developers.com/showthread.php?t=742403
2) Use the tool--any setting is fine, all we're using this for is getting into recovery mode. I clicked unroot 2.1.
3) Surprise! The tool can communicate with the phone just fine even though the phone is failing to boot. You're now in recovery mode.
4) Wipe the data and the cache on the device, and you're good as new. No flashing of update.zip required.

I guess that:
adb reboot recovery
would also work then?

Mithent said:
I guess that:
adb reboot recovery
would also work then?
Click to expand...
Click to collapse
You know, I have no idea. I'm assuming so since that's what I believe his software calls upon, but I've never actually tried it.

define your "bricked"
did you get this screen of
pc-!-phone ?
because in that screen, the phone is not recognized by windows when you plug in the USB cable
so ADB doesn't work when it's the phone is not listening to the PC

Mithent said:
I guess that:
adb reboot recovery
would also work then?
Click to expand...
Click to collapse
AllGamer said:
define your "bricked"
did you get this screen of
pc-!-phone ?
because in that screen, the phone is not recognized by windows when you plug in the USB cable
so ADB doesn't work when it's the phone is not listening to the PC
Click to expand...
Click to collapse
No, I did not get that screen. For me, it just blacked out and locked on bootup.

scouzer said:
No, I did not get that screen. For me, it just blacked out and locked on bootup.
Click to expand...
Click to collapse
then that is not bricked
that is just a software error
when you are truly bricked the phone will not do anything but show you only that screen

AllGamer said:
then that is not bricked
that is just a software error
when you are truly bricked the phone will not do anything but show you only that screen
Click to expand...
Click to collapse
Well I did not know this, and I doubt many people here do either. So I think it's helpful.

picture here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
* adding it to wiki

Hope I never see that screen then, so if you see that is it game over....no chance of recovery?

galaxysman said:
Hope I never see that screen then, so if you see that is it game over....no chance of recovery?
Click to expand...
Click to collapse
If your phone is 3 button disabled, no chance of recovery. If you have 3 button recovery enabled, it's no big deal.

Cant you just send it into Samsung to recover it if its under warentee??

Cant you just send it into Samsung to recover it if its under warranty??

d3a said:
Cant you just send it into Samsung to recover it if its under warentee??
Click to expand...
Click to collapse
yes you can
actually i did that to mine the one that had the 3 buttons disabled
the new one i picked up have the 3 buttons working properly

Can the 3 button be enabled through a potential future software update?
Or is it something thats so hard-coded in, that it cannot he ever fixed

Ziostilon said:
Can the 3 button be enabled through a potential future software update?
Or is it something thats so hard-coded in, that it cannot he ever fixed
Click to expand...
Click to collapse
it's called a SPL, it might be possible to be fixed if some developers figures out how to copy a good SPL over the defective SPL, but at the moment there is no fix

When i press "3 button" i go to downloading mod, how to get in recovery ? Except from rom manager...

micri said:
When i press "3 button" i go to downloading mod, how to get in recovery ? Except from rom manager...
Click to expand...
Click to collapse
same 3 button, but use volume up instead of down
see the wiki
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/Vibrant_GT-I9000M

Someone please help
I was trying to run the DTJG4 with the 512 PITT through ODIN when it failed.
I tried again and it didnt flash, so I tried rebooting the phone.
Now I get nothing... just a black screen.
Plug in the power, nothing, plug in the USB, nothing.
Battery removed several times and tried powering up just with power and battery, and trying 3 button combo that didnt work before, but still nothing.
Any ideas?
Thanks

AllGamer said:
picture here
* adding it to wiki
Click to expand...
Click to collapse
I had I9000M do this, 3 button mode was not working and had to return it. It happened during a kies update, luckly, 20 minutes after I had bought it. So I went to a different store and got my current phone. This phone is the best one of the three I've owned. Either 3 button mode just works, and the g-sensor calibration is much closer to being dead on. So there are good ones out there.
I've had 3 total. Here's a breakdown.
1. Purchased august 6th. First phone sold in the store. Download and Recovery modes worked 25% of the time. G-sensor calibration was horrible. Also could not be unlocked.
2. August 21st. Could not get the phone into either mode with button presses. Phone unlocked, but bricked via kies update. Never got to test the g-sensor. Last phone in same store as first purchase.
3. August 21st. Near perfect phone. 100% sucess gettung into download or recovery modes. Unlocked easily, and G-sensor is just slightly off. No need for calibration, unless using as leveling device. Purchased at a store that got initial stock on august 8th.
So, there ARE good phones out there. But the majority by the sounds of it are less than good. Which is unforunate.
As a former samsung owner as well, this is dissapointing. The original galaxy i7500L is still officially running android 1.5 in canada. I just hope and pray samsung doesn't drop this device from their dev cycles. And better yet.. Can fix all these problems with an update somehow...
Sent from my GT-I9000M using XDA App

So, only that specific screen counts as a brick?
On mine the 3 button combo doesn't work (I can only get to some weird "upload mode"), and the phone is stuck on the "Samsung Galaxy S GT-I9000" screen when I boot it up.
Does that mean I should still be able to use ADB with it? The PC seems to recognize the phone (as "SAMSUNG USB Composite Device"), as well as Odin, but ADB doesn't.

[Q] Can "see" device in ADB, not in fastboot....

Hey guys,
Bare with me please as I am fairly new-ish to Android but have some experience with Samsungs, HTCs and the beloved LG GT540.....
I appreciate if anyone can help me on my plight.....
My girlfriend was running Cyanogen Mod for the last year or so on her device and decided that she wanted to try out a different ROM on her phone....
I wanted to install the Oxegen ROM....
Originally I was thinking it would be easy and I could put it on through Clockwork Recovery and flash the zip no problem, for some reason when I rebooted to recovery clockwork would not load up on the device.... just blank screen....
Not content with this, bored on a Sunday afternoon I gave it a couple of hours of my time and in the process messed my girlfriends phone up....
What I did was I tried flashing back to stock using the LG KDZ updater, that was fine and the phone rebooted and has since stuck on the Android logo....
According to this thread : http://forum.xda-developers.com/showthread.php?t=1078745&highlight=stuck+on+android+screen I gave all this a go and I can not get the device showing up in Fastboot, I can not enable USB debugging on it either as I can not get into the phone to tick the box....
In my cmd prompt I am seeing this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In my device manager when my device is connected and powered on I am seeing this :
When I am connected and the device is in "download mode" my devices are like this :
I understand the steps provided in the link above and I am fairly confident I could do them if I can get the device "seen" in Fastboot....
I have installed and re-installed all the USB drivers in hope that it may be a driver issue, now I am wondering is it maybe my OS? Win7 64Bit Ultimate?
I can try it on XP netbook if thats all thats causing my issues....
I am kinda lost now and wondering have I bricked it? It will be the first phone I have if thats the case....
Any help would be appreciated, thanks a lot guys....
Mods if this is in the wrong area, please feel free to move my post.....

did u go to fastboot (power+camera pressed when booting up).
well, from my experience, if i flash incorrectly (via fastboot or recovery), it will go bootloops or go to clockwork, or if i flash incorrectly via kdz, i've got stuck in LG logo or got linux kernel panic.
it seems to me u've flash kdz incorrectly. flash kdz with fastboot mode via download (or emergency mode).
try this:
http://forum.xda-developers.com/showpost.php?p=13184840&postcount=42
and make sure u already install all LG drivers (u can Google those).
gud luck. if else fails, put a very sad and stupid face, act as u dont know anything, bring the phone to the LG representative in ur town.
idk for 64 bit version as i use 32 bit. u can try find pdanet driver, there is 64 bit driver there and it install fastboot well in PC.

m1st3r1 said:
did u go to fastboot (power+camera pressed when booting up).
well, from my experience, if i flash incorrectly (via fastboot or recovery), it will go bootloops or go to clockwork, or if i flash incorrectly via kdz, i've got stuck in LG logo or got linux kernel panic.
it seems to me u've flash kdz incorrectly. flash kdz with fastboot mode via download (or emergency mode).
try this:
http://forum.xda-developers.com/showpost.php?p=13184840&postcount=42
and make sure u already install all LG drivers (u can Google those).
gud luck. if else fails, put a very sad and stupid face, act as u dont know anything, bring the phone to the LG representative in ur town.
idk for 64 bit version as i use 32 bit. u can try find pdanet driver, there is 64 bit driver there and it install fastboot well in PC.
Click to expand...
Click to collapse
Fastboot and ADB works on Windows 7 Home Premium 64bit. I installed LG Drivers then Google USB Driver. It worked then. But I know I did struggle to finally get it working.

Thanks a lot for the advice and replies guys....
As I said, I think my problem lies in not being able to tick the USB debugging option on the phone as I can not boot into the phone to do so....
Is there a way to enable USB debugging over ADB?
As I said, I can "see" the phone responding to ADB, just not fastboot!
I am in the process of installing everything and starting fresh on the Xp netbook, if this fails I would say its new phone time for my g/f, Sony X8 is 80 euro on our network so if the worst comes to the worst I will get her a new one....
Much appreciated guys and if anyone has anything to the thread I will be all ears...
Cheers!

Ko_Ka said:
Thanks a lot for the advice and replies guys....
As I said, I think my problem lies in not being able to tick the USB debugging option on the phone as I can not boot into the phone to do so....
Is there a way to enable USB debugging over ADB?
As I said, I can "see" the phone responding to ADB, just not fastboot!
I am in the process of installing everything and starting fresh on the Xp netbook, if this fails I would say its new phone time for my g/f, Sony X8 is 80 euro on our network so if the worst comes to the worst I will get her a new one....
Much appreciated guys and if anyone has anything to the thread I will be all ears...
Cheers!
Click to expand...
Click to collapse
i think u got it wrong.
read here: http://android-dls.com/wiki/index.php?title=Fastboot and here: http://wiki.cyanogenmod.com/wiki/Fastboot
first of all, i need to ask u the question (again), can u boot to fastboot (or bootloader) when u pressed power (the reject/red phone button) and camera button altogether? the fastboot screen in the phone will be like black screen, but with a little amount of backlight (u'll notice the difference) or blue screen with texts if u flash a kdz-modified-fastboot. if u cant go to bootloader/fastboot, then u need to flash a kdz with fastboot.
u can try this: when u type adb devices, type: adb reboot bootloader
though im not sure if ur gf's phone has fastboot/bootloader (might be missing during the kdz flashing that u've done).
when u type adb devices

m1st3r1 - if you ever come to Dublin, I will buy you a beer!
After nearly 3 days of pulling what hair I have left on my head out, my problem was I was mistaking Fastboot for Download mode.....
I was connecting the phone holding the volume down so it came up "download mode" now all I did was hold the camera + red button and off it went with the command from the post above....
I feel like an idiot, but im a happy idiot right now.....
Thanks a lot, means a lot to me.... (and my girlfriend!)

LOL welcome to the hackers club

I just bricked mi phone :(

Try to return to stock from cyanogenmod, install the 4.1.2 baseband and I showed up this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I thought I could get it back by KZD and appears this:
I need your help to get my phone if you can help me appreciate it all.

Look for a file v10d_downgrade.kdz in the net, you have to flash that. And the flash whatever kdz you want
It wont work with other kdz.
Ps: i see a white screen in the first photo
Sent from my LG-E612g using Tapatalk 2

raul338 said:
Look for a file v10d_downgrade.kdz in the net, you have to flash that. And the flash whatever kdz you want
It wont work with other kdz.
Ps: i see a white screen in the first photo
Sent from my LG-E612g using Tapatalk 2
Click to expand...
Click to collapse
It does not work, the KDZ throws me the same error. Look:

DELETED sorry wrong post

First of all reinstall the drivers on your computer
Then, did you try to remove the battery, plug the phone to your computer (without the battery), then try to start the phone in Emergency Mode?
If you get to the Emergency Mode with the correct drivers installed, you should be able to flash anything from KDZ.
This method was the only way I could get my L7 in Emergency Mode AND recognized by KDZ, so you could be in the same situation as me maybe?

That method never worked for me, did you get a "UpTestEX_mod2_marwin.exe" in the packge that you downloaded? Use that, select emergency and the v10d_downgrade and flash! (follow a tutorial, you need to install small http server before...... like here)

have u tried "vol down" + "power button"
and when buttons light up, press the "menu" button
and do it a couple of times?

Nothing I've read has worked for me, trying to read the information on the device I get this:

venezuelanboy said:
Nothing I've read has worked for me, trying to read the information on the device I get this: /QUOTE]
Read Information never works, you have to "upgrade start" rigth away! Don't worry about that error
Click to expand...
Click to collapse

raul338 said:
venezuelanboy said:
Nothing I've read has worked for me, trying to read the information on the device I get this: /QUOTE]
Read Information never works, you have to "upgrade start" rigth away! Don't worry about that error
Click to expand...
Click to collapse
Upgrade Start does not work
Click to expand...
Click to collapse

Let pass without touching the screens and it appeared this, the touch screen does not work at this point, I touch it and nothing happens.
At a time when one of the combinations I appeared the cwm recovery, but when I restart the screen turned white and yellow of the previous photos.
raul338 said:
venezuelanboy said:
Nothing I've read has worked for me, trying to read the information on the device I get this: /QUOTE]
Read Information never works, you have to "upgrade start" rigth away! Don't worry about that error
Click to expand...
Click to collapse
Upgrade Start does not work
Click to expand...
Click to collapse

venezuelanboy said:
raul338 said:
Upgrade Start does not work
Click to expand...
Click to collapse
Did you set up small http server & configure it? (also with host file)
Sent from my LG-E612g using Tapatalk 2
Click to expand...
Click to collapse

Hey friend. I have already almost lost my phone several Times.
But persistance is the best to resolve your problem.
Firstly ur phone isnt bricked as it turns on!!!
So try this:
1° turn off phone
2° bottom up + down + turn on
3° should apper "emergency mode" [if this didnt work, try And get in this screen"
4°flash KDZ ( MAKE SURE ITS ON EMERGENCY MODE ON KDZ UPDATER ! AND THE MOST
IMPORTANT WHEN YOU FLASH IT WILL POP UP SEVERAL ERROS . DONT DO NOTHING LET IT CONTINUE )
5° Phone will boot loop (resolve it making a HARD RESET (bottom down+ menu+turn on)
6° now it will reset everything. Then u must flash AGAIN KDZ UPDATER (BUT NOW IT WONT SHOW ERROS ON KDZ UPDATER )
Job done
Phone recovered
PM ME IF ANY DOUBT OCCOURS
Sent From ... Lg e400 <-- {[Brasilian Here]}

Enter in DIAG MODE vol up+vol down+ turn on
(Just do it IF -> u have tried my tip ABOVE this one.)
After that , make sure u connect ur phone then, flash in KDZ UPDATE.
NO ERROR . THIS MUST WORK FOR YOU . AND AS I SAID
IF IT DONT RECONIZE YOUR PHONE THEN U MUST HARD RESET IT .
Sent From ... Lg e400 <-- {[Brasilian Here]}

Finally I could fix the problem without using KDZ and now I want to share with the community.
1. Remove the phone battery.
2. Press the button '+', and connect the usb (without battery).
3. Wait until the drivers are installed on the computer.
4. With the program of LG Mobile Support Tool, and with the phone connected press "Upgrade Error recovery" within the program.
5. Let it download the rom, you unzip and install.
Note: All this process without the battery attached to the phone.
That's all

Bootloop on CMWR and phone never close, only without battery!
Hello.
Today i want to upgrade my android, and surprise! When i push "install"and phone is was restarted, is entered in a continuos loop restart directly in CMWR mode. Here, it was impossible to install anything or make any changes, only "restart", and again, the phone is restarting directly in CMWR mode. At first I thought I bricked my phone, because even in emergency mode it could not start
BUT all this is madeit with battery inside!
After reading what was written here, I realized that I have to remove the battery, and surprise, on the second attempt i managed to start in emergency mode! (with usb cable connected to PC! ) :laugh:
Good...
Now, i openet the "LG Mobile Support Tool" (with usb connected to PC), and after LG mobile tool i let to check and install the last version of USB drivers , it was able to communicate with my PC. After that, i installed the latest available version of Android, via LG Mobile Tool and now is working.
BUT i lost the root of the phone. Anyway, it's the phone of my wife, and she's not interested in "walked" through it
Thanks to "andersonlima" , i understand that as long as boots, is not bricked !
Good luck in the future, and most importantly, read well, with calmness, that can occur various ideas, along with what you have in face, may lead to solving your problem! :good:

venezuelanboy said:
Finally I could fix the problem without using KDZ and now I want to share with the community.
1. Remove the phone battery.
2. Press the button '+', and connect the usb (without battery).
3. Wait until the drivers are installed on the computer.
4. With the program of LG Mobile Support Tool, and with the phone connected press "Upgrade Error recovery" within the program.
5. Let it download the rom, you unzip and install.
Note: All this process without the battery attached to the phone.
That's all
Click to expand...
Click to collapse
Omg man, thanks! Worked perfect, but i used kdz, lg software does not worked.

[Solved]D800 Bricked after using wrong AutoRec,No download mode

hi everyone, i accidentaly used the AutoRecLs980 app to flash the recovery to a D800 and now the device is bricked and wont boot on recovery nor on android,,, just keep showing those lines:
[850] Fastboot mode started
[900]udc_start()
i tried the command "fastboot devices" on sdk and i got this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
like is partially recognizing the device..
>>can i try flashing a TWRP.img? or what i did has broken other than recovery partitIon on the devices and that wont solve my problem..
i also founded this: http://forum.xda-developers.com/showthread.php?t=2582142 but dont know if will help me..
thanks so much for triying to help me.

elmy2424 said:
hi everyone, i accidentaly used the AutoRecLs980 app to flash the recovery to a D800 and now the device is bricked and wont boot on recovery nor on android,,, just keep showing those lines:
[850] Fastboot mode started
[900]udc_start()
i tried the command "fastboot devices" on sdk and i got this:
like is partially recognizing the device..
>>can i try flashing a TWRP.img? or what i did has broken other than recovery partitIon on the devices and that wont solve my problem..
i also founded this: http://forum.xda-developers.com/showthread.php?t=2582142 but dont know if will help me..
thanks so much for triying to help me.
Click to expand...
Click to collapse
jump on irc, freenode, lg-g2 channel. Tell them you used the wrong auto-rec and u are able to get into fastboot. They will give you/direct you to partitions for your phone. You will then need to flash these partitions. Probably the correct aboot and laf(downloadmode), and recovery(maybe not). You will then be able to get into download mode, where you can flash a stock rom. Or possibly give you old aboot and directly flash a custom recovery. Not sure. Go and ask.

elmy2424 said:
hi everyone, i accidentaly used the AutoRecLs980 app to flash the recovery to a D800 and now the device is bricked and wont boot on recovery nor on android,,, just keep showing those lines:
[850] Fastboot mode started
[900]udc_start()
i tried the command "fastboot devices" on sdk and i got this:
like is partially recognizing the device..
>>can i try flashing a TWRP.img? or what i did has broken other than recovery partitIon on the devices and that wont solve my problem..
i also founded this: http://forum.xda-developers.com/showthread.php?t=2582142 but dont know if will help me..
thanks so much for triying to help me.
Click to expand...
Click to collapse
Damn please report back if you resolve your issue. I'm sure you'll help anyone else who might themselves in a similar situation

You can install the Stock ROM For KDZ file, the G2 will be restored...
Search in Google/Youtube: Back To Stock ROM LG G2
PS. You can only enter the Download Mode with the G2 connected with PC by USB

he can't enter dld mode.
1. download autorec for your version
2. extract aboot - boot - laf
3.
fastboot flash aboot aboot.img
fastboot flash boot boot.img
fastboot flash laf laf.img

I did the same thing. Recovered by flashing the correct laf.img with fastboot, which repaired download mode. Then use download mode with a .kdz file and the (un)official LG rescue tool.
Sent from my LG-D801 using XDA Free mobile app

did you readed the title of mi post???
NO DOWNLOAD MODE...

@bender_007 @jug6ernaut@ahilliard
really thanks:laugh: ill do it as soon as i get in my house.
i was thinking to flash all the partitions since i didn´t know which one had the DOWNLOAD MODE xD, thanks again

elmy2424 said:
@bender_007 @jug6ernaut@ahilliard
really thanks:laugh: ill do it as soon as i get in my house.
i was thinking to flash all the partitions since i didn´t know which one had the DOWNLOAD MODE xD, thanks again
Click to expand...
Click to collapse
Just the ones I wrote. Don't touch others.

Solved

elmy2424 said:
Solved
Click to expand...
Click to collapse
I'm sorry that I write here but if I do not want to create a new topic. Maybe someone is able to help?
Hello my problems started up in the morning as I came up with a kernel update.
Mistakenly threw versions of the D800 and the phone went into fastboot.
I tried the method with a live CD of Ubuntu but it does not fit me these many partitions so I can not write it these paintings partition.
I tried to unpack the correct kernel to a file boot.img fastboot flash I uploaded by write and quite like to be spoiled because I wrote that there is no certificate or something - so as to completely fell boot.
But after some time did enter into download mode I uploaded versions V220D and went.
Now phone can enter to download mode but charges only to the logo and the LED flashes blue and green.
The computer sees the phone software from LG emergency phone does not play because he writes with is the newest version but see the battery level and what I currently versions.
What else to do to restore phone?
I would be very grateful.

will find some time for you later

bender_007 said:
will find some time for you later
Click to expand...
Click to collapse
thank you very much

sarzyk said:
thank you very much
Click to expand...
Click to collapse
hm..I see you managed to flash the rom ?
so the problem is you didn't wipe.
turn the device OFF
hold power + volume down until you see the LG logo, release the buttons for a moment and then hold volume down + volume up. On the white screen confirm 2-3 times with power button. After the factory reset (the thing you just did) it will boot.

bender_007 said:
hm..I see you managed to flash the rom ?
so the problem is you didn't wipe.
turn the device OFF
hold power + volume down until you see the LG logo, release the buttons for a moment and then hold volume down + volume up. On the white screen confirm 2-3 times with power button. After the factory reset (the thing you just did) it will boot.
Click to expand...
Click to collapse
you are a god.
Cleans all day interencie but nowhere have written about this to keep the volume + and - raze ..
For now operates proof, and write exactly what and how.
We would like to thank my friend.
Please write more as I'll official* Rom from LG is the site can check if a ROOT or another Rom if it was uploaded?
Where can I check whether they were any signs of interference?
Is it only in Download Mode it says?

[HELP] LG G2 bricked after install TWRP

After i have installed my TWRP i think my LG g2 have bricked
After i restart my phone this is the only thing that appers to me:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(the blue mark its not problem, always have that)
I know that look like the screen is cracked but the screen was allright until i restart my phone,
please help me

That may just be the white line issue? I have not actually seen it myself but if you do a quick search you should be able to fix it. Worst case you can just boot into download mode and restore to stock, it is software based since it happened after a flash.

The white line issue occurs if you flash a kernel or recovery which is meant for the JDI display but you migh have an LGD. Look or your twrp you flashed is meant for only one. I suggest to check out dr87 twrp recovery since it has display detection.
You didn't bricked your phone, maybe a bit softbricked but further nothing to worry about.

Hi, thanks for the replys
My only problem is that when i connect my phone to my pc doesn't connect it, and only appears the white lines
Can you help me?

wulsic said:
The white line issue occurs if you flash a kernel or recovery which is meant for the JDI display but you migh have an LGD. Look or your twrp you flashed is meant for only one. I suggest to check out dr87 twrp recovery since it has display detection.
You didn't bricked your phone, maybe a bit softbricked but further nothing to worry about.
Click to expand...
Click to collapse
Hi, can you tell me some advices to try to recover my phone to life?
Thanks

Eriio said:
Hi, can you tell me some advices to try to recover my phone to life?
Thanks
Click to expand...
Click to collapse
you can flash maybe with adb sideload in the recovery another kernel,
you can go to download mode and restore to stock.
Is your screen completely white or white lines?

wulsic said:
you can flash maybe with adb sideload in the recovery another kernel,
you can go to download mode and restore to stock.
Is your screen completely white or white lines?
Click to expand...
Click to collapse
I can't, my lg g2 do not connect to my computer, my computer only detect adb android and not my phone.
When i start my phone nothing appens, only the white lines and thats all!
I tried everything but i cant go to download mode, i think the phone does not start

Eriio said:
I can't, my lg g2 do not connect to my computer, my computer only detect adb android and not my phone.
When i start my phone nothing appens, only the white lines and thats all!
I tried everything but i cant go to download mode, i think the phone does not start
Click to expand...
Click to collapse
Wait after you've installed it... Did you install it with a app within Android?
If so then I think it might've flashed it wrong to maybe a wrong partition or what, I will search for you.

wulsic said:
Wait after you've installed it... Did you install it with a app within Android?
If so then I think it might've flashed it wrong to maybe a wrong partition or what, I will search for you.
Click to expand...
Click to collapse
Actually i dont know, the only think i know is that i used to have a recovery installed and I install TWRP too, and when i restart the phone it started with the white lines and do not connect to computer

Eriio said:
Actually i dont know, the only think i know is that i used to have a recovery installed and I install TWRP too, and when i restart the phone it started with the white lines and do not connect to computer
Click to expand...
Click to collapse
I've didn't found really much but you could also check in general/ google for people with the same problem and if nothing works then you have to try that unbricking thing guide where you have to reflash partitions etc.

wulsic said:
I've didn't found really much but you could also check in general/ google for people with the same problem and if nothing works then you have to try that unbricking thing guide where you have to reflash partitions etc.
Click to expand...
Click to collapse
But how can i reflash a partition if my computer dont even recognize my phone?

Eriio said:
But how can i reflash a partition if my computer dont even recognize my phone?
Click to expand...
Click to collapse
The thing is that you need to open your phone then so that's risky. I suggest to google for people with the same problem and maybe search if there's a fix else you maybe got to sell your phone or try that risky way to fix it.

wulsic said:
The thing is that you need to open your phone then so that's risky. I suggest to google for people with the same problem and maybe search if there's a fix else you maybe got to sell your phone or try that risky way to fix it.
Click to expand...
Click to collapse
No one is to stupid to make the same thing that i have made.
There is none problem like mine

Try going to the download mode by powering off the phone completely then holding the vol up button and inserting the USB cable. The usb cable must be connected to your computer.

Eriio said:
After i have installed my TWRP i think my LG g2 have bricked
After i restart my phone this is the only thing that appers to me:
(the blue mark its not problem, always have that)
I know that look like the screen is cracked but the screen was allright until i restart my phone,
please help me
Click to expand...
Click to collapse
mate i have same problem. How can u solve ? plz help me

cnaukai said:
mate i have same problem. How can u solve ? plz help me
Click to expand...
Click to collapse
Hi
There's no problem! I'll explain to you.
The problem is you have a bad kernel instaled and that's why you have the lines. When you power on your phone you can't see but there's a message related to "NO Recovery mode, No download mode", it's "Secure booting error".
So you have to follow all the steps on this tutorial:
http://forum.xda-developers.com/showthread.php?t=2582142
When you have all that done you'll have your phone back!!
The only problem will be (at least for me) the lines will be there in the same, so you have to find the best kernel to your rom
I think that's all, GOOD LUCK!!

Eriio said:
Hi
There's no problem! I'll explain to you.
The problem is you have a bad kernel instaled and that's why you have the lines. When you power on your phone you can't see but there's a message related to "NO Recovery mode, No download mode", it's "Secure booting error".
So you have to follow all the steps on this tutorial:
http://forum.xda-developers.com/showthread.php?t=2582142
When you have all that done you'll have your phone back!!
The only problem will be (at least for me) the lines will be there in the same, so you have to find the best kernel to your rom
I think that's all, GOOD LUCK!!
Click to expand...
Click to collapse
adb not working. No fastboot is there any other way

cnaukai said:
adb not working. No fastboot is there any other way
Click to expand...
Click to collapse
You don't need fastboot!
If you follow all the instructions it will work (i think in the windows too, don't remember if I made it on windows or linux).
You have to install all the drivers, and then you'll do it
If you can't do it, try this:
https://www.youtube.com/watch?v=QK40sjiDq0Y
But i have made the same thing that i sent you (link of xda) and that worked for me!

Eriio said:
You don't need fastboot!
If you follow all the instructions it will work (i think in the windows too, don't remember if I made it on windows or linux).
You have to install all the drivers, and then you'll do it
If you can't do it, try this:
https://www.youtube.com/watch?v=QK40sjiDq0Y
But i have made the same thing that i sent you (link of xda) and that worked for me!
Click to expand...
Click to collapse
How can i run fastboot mode phone

cnaukai said:
How can i run fastboot mode phone
Click to expand...
Click to collapse
You don't need to run anything, when you turn on your phone you don't see but appear a error message. Then if you follow all the instructions (commands) in the tutorial of xda you'll have to delete the img on your phone and replace them with the new ones!
Then you install the original rom or the rom you choose and when it work you'll have to find the best kernel!
If you leave a comment on the tutorial they will help you better!
Anyway you can ask me anything!!
Good Luck!