hi friend i am facing some bug in my device after kitkat update g4 and i thought it get fix in next version but not in nh3 too. Bug are in home lock screen walpaer dnt get change in ripple effect
And while using sim 2 only by disabling sim 1 and req ussd code and make a call it says mobile network nt availble.
have ur facing similar problem like it plese do share.
Get Fixed link : http://forum.xda-developers.com/gal...tkat-4-4-2-smg7102-ins-grand-2-t2851126/page2
Bro try clearing cache in recovery mode.
Even if the problem exits try reinstalling the Firmware using odin
First thing try interchanging the sims and later try factory reset and finally if none works Flash the firrmware
Rahul10 said:
Bro try clearing cache in recovery mode.
Even if the problem exits try reinstalling the Firmware using odin
Click to expand...
Click to collapse
Ok i done it .but no any workd ?
Sanjuujosephh said:
First thing try interchanging the sims and later try factory reset and finally if none works Flash the firrmware
Click to expand...
Click to collapse
I done no any change.. any one facing problem like this?
abilash10 said:
I done no any change.. any one facing problem like this?
Click to expand...
Click to collapse
Try reinstalling the Firmware or try factory resting....
ok bro
Rahul10 said:
Try reinstalling the Firmware or try factory resting....
Click to expand...
Click to collapse
ok bro.. and how may i reset that count ?? how much time it unroot and root ?make it to zero.
abilash10 said:
ok bro.. and how may i reset that count ?? how much time it unroot and root ?make it to zero.
Click to expand...
Click to collapse
Sry bro i didn't get you.?
Rahul10 said:
Sry bro i didn't get you.?
Click to expand...
Click to collapse
I mean how may i get my warranty back by making binary zero? Triangle away is aplicable?
abilash10 said:
I mean how may i get my warranty back by making binary zero? Triangle away is aplicable?
Click to expand...
Click to collapse
You don't need to use Triangle Away now... You must press three buttons (home + power + volume DOWN) until a screen with a triangle shows, you press volume up to continue, then plug in your phone via USB (Of course to your PC) after the "Downloading..." screen appears.
Assuming you already have all drivers and stuff to listen from your USB connection, you then have to open Odin program to flash the firmware file you used to install KitKat. That's how you re-install your firmware.
-------------------------------------------------------------------------------
To reset cache partition, you hold down home, power and volume UP this time, this is for entering recovery mode, when you see the blue "Recovery botting" at the top you can release all buttons now, then you go down to "Reset cache partition" and make sure you don't select "Factory reset" if you see a long list of "No no no no no no" then you're in the wrong area, and you MUST go back again.
abilash10 said:
I mean how may i get my warranty back by making binary zero? Triangle away is aplicable?
Click to expand...
Click to collapse
Our Grand 2 doesn't have a KNOX WARRANTY VOID bit. Don't worry.
But this will be important if rooting a S4 or a Note 3 or above.
WaseemAlkurdi said:
Our Grand 2 doesn't have a KNOX WARRANTY VOID bit. Don't worry.
But this will be important if rooting a S4 or a Note 3 or above.
Click to expand...
Click to collapse
Ok thks for this.
WaseemAlkurdi said:
Our Grand 2 doesn't have a KNOX WARRANTY VOID bit. Don't worry.
But this will be important if rooting a S4 or a Note 3 or above.
Click to expand...
Click to collapse
Then why does we have this in our device?
And why do we have to disable knox during the root process
Rahul10 said:
Then why does we have this in our device?
And why do we have to disable knox during the root process
Click to expand...
Click to collapse
hi friend yes in our device there is no any warranty void count.. it is in s4 .s4 mini note 3 etc.. rom ..
Bug get fixed in new nh6
bug fixed in nh6
Finally bug get fixed in nh6
Rahul10 said:
Then why does we have this in our device?
And why do we have to disable knox during the root process
Click to expand...
Click to collapse
Because it shows annoying notifications saying:
Unauthorized changes have been made. Reboot to undo them.
Nothing happens after a reboot.
KNOX*.apk are the ones responsible for this.
Related
Hey there
Will using TriangleAway to reset the counter and flashing to stock with ODIN definitely mean that service people will not be able to tell the phone has been modified at all?
Its possible there's a hidden counter but what we can't see we can't guard about...
I would also suggest to hard reset(factory reset in options) completely to reset all statuses..
ultramag69 said:
Its possible there's a hidden counter but what we can't see we can't guard about...
I would also suggest to hard reset(factory reset in options) completely to reset all statuses..
Click to expand...
Click to collapse
Also because the s4 does not show a triangle on the download mode screen, Is there any way to check the counter without using triangleaway? and how do they check it in service
yabanize said:
Hey there
Will using TriangleAway to reset the counter and flashing to stock with ODIN definitely mean that service people will not be able to tell the phone has been modified at all?
Click to expand...
Click to collapse
If you simply boot in to "Download mode" the phone will show if you have an official or custom binary.... there is no counter...just says custom or official. ..so just do a firmware flash via odin and then a hard reset (optional) ... then check your binary via download mode...I'm sure it'll be reset to official
Good luck hope this helped
Imgoing to test it
Thanks Bro....
:good::good::good::good:
Also in settings go to About>Status and at the bottom it will show either "Official" or "Custom"... This is the bugger that's hard to change...
anuradhakelum said:
Thanks Bro....
:good::good::good::good:
Click to expand...
Click to collapse
Let us know if it worked )
sadeshmagic said:
If you simply boot in to "Download mode" the phone will show if you have an official or custom binary.... there is no counter...just says custom or official. ..so just do a firmware flash via odin and then a hard reset (optional) ... then check your binary via download mode...I'm sure it'll be reset to official
Good luck hope this helped
Click to expand...
Click to collapse
Im pretty sure there is a counter, It shows up in the triangleaway app
You have to do it this way.
1. Make sure you have a stock Samsung kernel and recovery (triangle away needs it to work on the s4).
- It may be easiest to flash stock firmware and then root again.
2. Once you have stock kernel and recovery and are rooted you can run triangle away. Make sure you follow the instructions carefully as it's a different procedure from older devices.
3. Flash stock firmware that your phone came with. I've discovered the hard way that Samsung service centres match the serial number to the firmware version as another means of checking for software modification.
4. Factory reset.
If you've done everything correctly you'll have official binary/status normal in download mode.
I've done this procedure myself and can confirm it's 100% working.
-- Sent from the mighty Note 2 --
Hello.
My sensor for S View cover is broken (just like many others), which means S View screen is on all the time which renders the phone completely useless (it's impossible to leave this screen).
For a while, I've used CyanogenMod to get around it, as it doesn't have this S View "feature". Now I want to send my phone to repair so the S View sensor can be fixed. I believe I have flashed a stock firmware and rom, and I have also rooted it, and I need help with the next steps:
I need to reset my binary counter.
I need to reset my "CURRENT BINARY: Custom"
I need to reset my "CURRENT STATUS: Custom"
My problem is that I can't use triangle away, because it's an app that I need to install and use on the phone. I am completely unable to use the screen (lets imagine the screen is dead). So is it possible to do this via odin?
I captured a quick video, to show the current status of the phone (and it has been like this on any rom that is based on stock rom - even GPE).
Inrego said:
Hello.
My sensor for S View cover is broken (just like many others), which means S View screen is on all the time which renders the phone completely useless (it's impossible to leave this screen).
For a while, I've used CyanogenMod to get around it, as it doesn't have this S View "feature". Now I want to send my phone to repair so the S View sensor can be fixed. I believe I have flashed a stock firmware and rom, and I need help with the next steps:
I need to reset my binary counter.
I need to reset my "CURRENT BINARY: Custom"
I need to reset my "CURRENT STATUS: Custom"
My problem is that I can't use triangle away, because it's an app that I need to install and use on the phone. I am completely unable to use the screen (lets imagine the screen is dead). So is it possible to do this via odin?
Click to expand...
Click to collapse
Can you still boot in download mode? and does it say Knox void warranty?
Repulsa said:
Can you still boot in download mode? and does it say Knox void warranty?
Click to expand...
Click to collapse
Yes I can. And it says nothing about Knox
Inrego said:
Yes I can. And it says nothing about Knox
Click to expand...
Click to collapse
Download this mate http://www.androidfilehost.com/?fid=23050663588004454 then flash it via odin , once your done , Download triangle away . and reset the binary .
Edit: Sorry about that , Now redownload it should be okey
Repulsa said:
Download this mate then flash it via odin , once your done , Download triangle away . and reset the binary .
Edit Link
Click to expand...
Click to collapse
Download what? I think you missed the link
Inrego said:
Download what? I think you missed the link
Click to expand...
Click to collapse
Hello , hehe actually i fixed the link have a nice day.
Repulsa said:
Download this mate http://www.androidfilehost.com/?fid=23050663588004454 then flash it via odin , once your done , Download triangle away . and reset the binary .
Edit: Sorry about that , Now redownload it should be okey
Click to expand...
Click to collapse
I forgot to mention my phone is rooted currently. But the problem is that I cannot use the OS because of the S View thingy. So unless S View is disabled in the rom you linked, I think I will have the same problem. I'll give it a try, though.
I captured a quick video, to show the current status of the phone (and it has been like this on any rom that is based on stock rom - even GPE).
Inrego said:
I forgot to mention my phone is rooted currently. But the problem is that I cannot use the OS because of the S View thingy. So unless S View is disabled in the rom you linked, I think I will have the same problem. I'll give it a try, though.
Click to expand...
Click to collapse
EDIT : Im sorry to break this to you mate , you need to send your phone to technical service. this is a hardware problem . Im sorry . http://forum.xda-developers.com/showthread.php?t=2410642
Repulsa said:
EDIT : Im sorry to break this to you mate , you need to send your phone to technical service. this is a hardware problem . Im sorry . http://forum.xda-developers.com/showthread.php?t=2410642
Click to expand...
Click to collapse
Ok, it is flashing now. I am 90% sure it is a hardware problem. I also wrote in the first post that I want to send it to repair, but I wanted to restore everything to stock so I am sure there is still warranty
Inrego said:
Ok, it is flashing now. I am 90% sure it is a hardware problem. I also wrote in the first post that I want to send it to repair, but I wanted to restore everything to stock so I am sure there is still warranty
Click to expand...
Click to collapse
Im sure there is still warranty for that phone because your still on old bootloader and it doesnt say any Knox void warranty when you boot into download mode., but im guessing once they fix your phone they might update your phone to the newest stock firmware with the newest bootloader on it. Goodluck mate
Okay, thanks
Sent from my Nexus 5 using Tapatalk
Hi to all and I hope you all had a great Christmas and I wish you all a prosperous new year.
On Christmas Eve I updated my phone to the 4.3 software through Kies and ever since then, I cannot turn my WIFI toggle on at all- it switches off quickly without connecting, I have tried a few WIFI patches but I cannot find one for my baseband/build number, so none have been successful so far.
Another problem is that when my phone 'sleeps' (I lock it using the power button) it disconnects from my mobile network and sometimes it will reconnect back however after a few times it will stop reconnecting and then I have to keep switching Network Mode ( from LTE/WCDMA/GSM to WCDMA/GSM and vice versa) to be able to get signal. SOLVED
If it is important, my phone was rooted using Odin before doing the 4.3 update however I did NOT install any custom FW, custom recovery or any other modifications.
I'm from the U.K and 3 is my network provider.
Model number: GT-I9505
Android Version: 4.3
Baseband version: I9505XXUBMEA I9505XXUEMK9
Kernel Version: 3.4.0-2082040
[email protected] #1
Thu Nov 21 15:13:46 KST 2013
Build Number: JSS15J.I9505XXUEMK9
I've tried factory reset but problems still persist, please help
lelouch6 said:
Hi to all and I hope you all had a great Christmas and I wish you all a prosperous new year.
On Christmas Eve I updated my phone to the 4.3 software through Kies and ever since then, I cannot turn my WIFI toggle on at all- it switches off quickly without connecting, I have tried a few WIFI patches but I cannot find one for my baseband/build number, so none have been successful so far.
Another problem is that when my phone 'sleeps' (I lock it using the power button) it disconnects from my mobile network and sometimes it will reconnect back however after a few times it will stop reconnecting and then I have to keep switching Network Mode ( from LTE/WCDMA/GSM to WCDMA/GSM and vice versa) to be able to get signal.
If it is important, my phone was rooted using Odin before doing the 4.3 update however I did NOT install any custom FW, custom recovery or any other modifications.
I'm from the U.K and 3 is my network provider.
Model number: GT-I9505
Android Version: 4.3
Baseband version: I9505XXUBMEA
Kernel Version: 3.4.0-2082040
[email protected] #1
Thu Nov 21 15:13:46 KST 2013
Build Number: JSS15J.I9505XXUEMK9
I've tried factory reset but problems still persist, please help
Click to expand...
Click to collapse
Hi mate,
Try flashing MK9 GSM modem and LTE Modem via ODIN.........Your build is new bootloader and looks like an old 4.2 baseband.
Look HERE for them.
EDIT - Although I am not too sure if this will affect your KNOX Warranty Status!!!!!
EDIT 2 - But if this was an official update and your phone is currently unrooted/official then I would imagine you could return it to be repaired and explain the update has made things worse?
CarlM34 said:
Hi mate,
Try flashing MK9 GSM modem and LTE Modem via ODIN.........Your build is new bootloader and looks like an old 4.2 baseband.
Look HERE for them.
EDIT - Although I am not too sure if this will affect your KNOX Warranty Status!!!!!
EDIT 2 - But if this was an official update and your phone is currently unrooted/official then I would imagine you could return it to be repaired and explain the update has made things worse?
Click to expand...
Click to collapse
Thanks for the fast reply! I just flashed the MK9 Modem like you said and I can confirm the network lost when sleeping problem has been solved! Thank you so much !
As for the KNOX status, when I go into download mode there is NOT a KNOX field. I thought once I updated to 4.3 there would be a field designated to KNOX however this is not the case, though I do have the KNOX app on my phone. So basically, I don't know whether I have voided the KNOX warranty or not. Could this be a source to the WIFI problem?
My binary is still custom so I can't give it in for warranty. I'm aware of the Triangle away app however I believe I need to root my phone again? and im not sure if this is possible for 4.3 on GT-I9505 yet...?
Do you have any idea as to how to solve the WIFI problem? Thanks again!
lelouch6 said:
Thanks for the fast reply! I just flashed the MK9 Modem like you said and I can confirm the network lost when sleeping problem has been solved! Thank you so much !
As for the KNOX status, when I go into download mode there is NOT a KNOX field. I thought once I updated to 4.3 there would be a field designated to KNOX however this is not the case, though I do have the KNOX app on my phone. So basically, I don't know whether I have voided the KNOX warranty or not. Could this be a source to the WIFI problem?
My binary is still custom so I can't give it in for warranty. I'm aware of the Triangle away app however I believe I need to root my phone again? and im not sure if this is possible for 4.3 on GT-I9505 yet...?
Do you have any idea as to how to solve the WIFI problem? Thanks again!
Click to expand...
Click to collapse
:good:
Try flashing the MK9 LTE Modem also.......Its also known as the Wifi-fix....You can get it from the same thread I linked previous.
lelouch6 said:
Thanks for the fast reply! I just flashed the MK9 Modem like you said and I can confirm the network lost when sleeping problem has been solved! Thank you so much !
As for the KNOX status, when I go into download mode there is NOT a KNOX field. I thought once I updated to 4.3 there would be a field designated to KNOX however this is not the case, though I do have the KNOX app on my phone. So basically, I don't know whether I have voided the KNOX warranty or not. Could this be a source to the WIFI problem?
My binary is still custom so I can't give it in for warranty. I'm aware of the Triangle away app however I believe I need to root my phone again? and im not sure if this is possible for 4.3 on GT-I9505 yet...?
Do you have any idea as to how to solve the WIFI problem? Thanks again!
Click to expand...
Click to collapse
1. Download this: HERE and unrar it
2. Put ur phone in DOWNLOAD MODE
3. Open Odin as PHONE/CP (the file u downloaded in step 1.)
4. Click Start. When the process finish ur phone will reboot
5. Enjoy with new WIFI working :highfive:
CarlM34 said:
:good:
Try flashing the MK9 LTE Modem also.......Its also known as the Wifi-fix....You can get it from the same thread I linked previous.
Click to expand...
Click to collapse
Just tried this... no luck
lelouch6 said:
Just tried this... no luck
Click to expand...
Click to collapse
Did you try @Joku1981 suggestion above?
CarlM34 said:
Did you try @Joku1981 suggestion above?
Click to expand...
Click to collapse
Sorry I'm new here and I'm not sure how to mention/quote back to two users at the same time.
Yes I also tried @Joku1981 suggestion, I believe it was the same as yours. Unsuccessful (thanks for the suggestion Joku)
Anything else I can try?
lelouch6 said:
Sorry I'm new here and I'm not sure how to mention/quote back to two users at the same time.
Yes I also tried @Joku1981 suggestion, I believe it was the same as yours. Unsuccessful (thanks for the suggestion Joku)
Anything else I can try?
Click to expand...
Click to collapse
Go to Kies 3 and make me a screenshot pls for see if all is OK
Joku1981 said:
Go to Kies 3 and make me a beaty screenshot pls for see if all is OK
Click to expand...
Click to collapse
beaty screenshot? what do you mean by that? Do you want me to just screenshot my Kies 3 when my phone is connected?
lelouch6 said:
beaty screenshot? what do you mean by that? Do you want me to just screenshot my Kies 3 when my phone is connected?
Click to expand...
Click to collapse
Yeah! :highfive:
Joku1981 said:
Yeah! :highfive:
Click to expand...
Click to collapse
Here you go
lelouch6 said:
here you go
Click to expand...
Click to collapse
All seems correct if u are using UK ROM H3G branded. If i was u:
Make a backup of ur SD Internal Card
From your home screen press the apps icon in the lower right corner.
Find and press the settings icon.
In the upper end of the screen press the accounts tab.
in the bottom of the next screen press the Backup and reset button.
Press the factory data reset.
Read the info on your cell phone screen and hit Reset device.
Joku1981 said:
All seems correct if u are using UK ROM H3G branded. If i was u:
Make a backup of ur SD Internal Card
From your home screen press the apps icon in the lower right corner.
Find and press the settings icon.
In the upper end of the screen press the accounts tab.
in the bottom of the next screen press the Backup and reset button.
Press the factory data reset.
Read the info on your cell phone screen and hit Reset device.
Click to expand...
Click to collapse
I did this before and nothing changed. But i will try again because I changed the modem.
What if this doesn't change anything?
lelouch6 said:
I did this before and nothing changed. But i will try again because I changed the modem.
What if this doesn't change anything?
Click to expand...
Click to collapse
Are u sure KNOX APP no is blocking ur WIFI?? (when u try to turn on ur WIFI, appears one message like "blocking unauthroized access to a secure area")
In this case delete this files with Root explorer (or one Explorer for rooted devices):
KNOX in System/App folder:
ContainerAgent.apk
KNOXAgent.apk
ContainerEventsRelayManager.apk
KLMSAgent.apk
KnoxAttestationAgent.apk
KNOXStore.apk
KNOXStub.apk
SPDClient.apk
Joku1981 said:
Are u sure KNOX APP no is blocking ur WIFI?? (when u try to turn on ur WIFI, appears one message like "blocking unauthroized access to a secure area")
In this case delete this files with Root explorer (or one Explorer for rooted devices):
KNOX in System/App folder:
ContainerAgent.apk
KNOXAgent.apk
ContainerEventsRelayManager.apk
KLMSAgent.apk
KnoxAttestationAgent.apk
KNOXStore.apk
KNOXStub.apk
SPDClient.apk
Click to expand...
Click to collapse
Just factory reset my phone... still cannot turn WIFI on
No, nothing comes up when I'm trying to turn on my WIFI. I try to turn it on, then it turns off immediately with no message
lelouch6 said:
Just factory reset my phone... still cannot turn WIFI on
No, nothing comes up when I'm trying to turn on my WIFI. I try to turn it on, then it turns off immediately with no message
Click to expand...
Click to collapse
Try to delete the KNOX files i was telling u and reboot ur phone then :fingers-crossed:
Joku1981 said:
Try to delete the KNOX files i was telling u and reboot ur phone then :fingers-crossed:
Click to expand...
Click to collapse
My phone is not rooted. Does my phone need to be rooted to delete the files?
lelouch6 said:
My phone is not rooted. Does my phone need to be rooted to delete the files?
Click to expand...
Click to collapse
Yeah, but tc if u do it u will void ur warranty KNOX 0x1
Joku1981 said:
Yeah, but tc if u do it u will void ur warranty KNOX 0x1
Click to expand...
Click to collapse
Is this really the only solution? I don't want to cause any more damage to my phone, I just want to get the WIFI working and be on stock ROM
I'm running MJ7 software on my Three network UK I9505, rooted with knox flag 0x1 and just installed Kies 3 and it's telling me to update my phone. Is this safe to do? Should I do it manually via Odin instead?
Device status is custom.
Swizzy88 said:
I'm running MJ7 software on my Three network UK I9505, rooted with knox flag 0x1 and just installed Kies 3 and it's telling me to update my phone. Is this safe to do? Should I do it manually via Odin instead?
Device status is custom.
Click to expand...
Click to collapse
I dont think you can update it since its already modified ,You need a clean stock rom inorder to update via Kies. have a nice day.
Swizzy88 said:
I'm running MJ7 software on my Three network UK I9505, rooted with knox flag 0x1 and just installed Kies 3 and it's telling me to update my phone. Is this safe to do? Should I do it manually via Odin instead?
Device status is custom.
Click to expand...
Click to collapse
Yes u can update by Kies 3 only u will lose the root access
Joku1981 said:
Yes u can update by Kies 3 only u will lose the root access
Click to expand...
Click to collapse
Yeah I anticipated that I will lose root but it's no big deal. It's just that with Kies 3 it let me all the way to ticking the boxes and the next step being update whereas the old Kies never let me go that far with custom status.
Also has a nice new warning in red about rooted phones potentially being damaged by updating, which I never saw before, hence why I asked. I presumed though that it's the standard Samsung warnings just in case something goes wrong
Just need to charge my battery because it won't let me update just yet at 77%.
Swizzy88 said:
Yeah I anticipated that I will lose root but it's no big deal. It's just that with Kies 3 it let me all the way to ticking the boxes and the next step being update whereas the old Kies never let me go that far with custom status.
Also has a nice new warning in red about rooted phones potentially being damaged by updating, which I never saw before, hence why I asked. I presumed though that it's the standard Samsung warnings just in case something goes wrong
Just need to charge my battery because it won't let me update just yet at 77%.
Click to expand...
Click to collapse
I update my phone rooted unbranded with Kies 3 always coz im in knox 0x1. If u arent sure (coz ur phone is branded) u can update by Odin coz anyway u have knox 0x1 too
Seems to work fine so far. Only issue is that Wifi isn't working. Factory reset or total reflash via Odin?
Swizzy88 said:
Seems to work fine so far. Only issue is that Wifi isn't working. Factory reset or total reflash via Odin?
Click to expand...
Click to collapse
1. Make a Internal Memory Backup
2. Factory reset
Joku1981 said:
1. Make a Internal Memory Backup
2. Factory reset
Click to expand...
Click to collapse
Still no WiFi :/
Swizzy88 said:
Still no WiFi :/
Click to expand...
Click to collapse
Apps - Settings - More - About device and make a screenshot pls :fingers-crossed:
Joku1981 said:
Apps - Settings - More - About device and make a screenshot pls :fingers-crossed:
Click to expand...
Click to collapse
There ya go
Swizzy88 said:
There ya go
Click to expand...
Click to collapse
Use Odin v3.09
Untick Autoreboot
Flash modem
Take out the battery and put it in again
Turn on into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Take out the battery and put it in again
Once done, unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
*EDIT: When u reboot maybe u dont have wifi. Try this wifi fix:
- Turn off ur phone
- Go to download mode
- Open Odin
- Flash this file as a phone/CP
- Ur phone will reboot, try ur wifi now
Joku1981 said:
Use Odin v3.09
Untick Autoreboot
Flash modem
Take out the battery and put it in again
Turn on into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Take out the battery and put it in again
Once done, unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
*EDIT: When u reboot maybe u dont have wifi. Try this wifi fix:
- Turn off ur phone
- Go to download mode
- Open Odin
- Flash this file as a phone/CP
- Ur phone will reboot, try ur wifi now
Click to expand...
Click to collapse
Thanks, will give it a try first thing tomorrow morning! Still have a folder with Odin and adb drivers luckily :good:
I had this issue before with prerooted ROM but factory reset always did the trick in that case
Joku1981 said:
Use Odin v3.09
Untick Autoreboot
Flash modem
Take out the battery and put it in again
Turn on into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Take out the battery and put it in again
Once done, unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
*EDIT: When u reboot maybe u dont have wifi. Try this wifi fix:
- Turn off ur phone
- Go to download mode
- Open Odin
- Flash this file as a phone/CP
- Ur phone will reboot, try ur wifi now
Click to expand...
Click to collapse
Everything works again now! I had to use the second file you posted for some reason, I tried the first one twice but it didn't work.
Already rooted and titanium backup restored
Thanks very much for the help
Swizzy88 said:
Everything works again now! I had to use the second file you posted for some reason, I tried the first one twice but it didn't work.
Already rooted and titanium backup restored
Thanks very much for the help
Click to expand...
Click to collapse
Apps - Settings - More - About device and make a screenshot pls ( Take a look the older pic u attached and u will see ur baseband changed to MK8 now). If the wifi trick worked for ya.... U did it perfect. Good job :highfive:
Joku1981 said:
Apps - Settings - More - About device and make a screenshot pls ( Take a look the older pic u attached and u will see ur baseband changed to MK8 now). If the wifi trick worked for ya.... U did it perfect. Good job :highfive:
Click to expand...
Click to collapse
There you go, matching versions now :good:
Okay so my galaxy s4 can't boot, it is stuck at the Samsung Galaxy S4 logo forever, I can't enter Recovery mod when I try to, the samsung galaxy logo appears with the blue texts but sticks there forever, however I can still enter download mod and I have tried flashing it with multiple stock roms but couldn't get it to work ... I don't know much about these stuff so I really need your help guys, thank you in advance
PS: My phone is a GT-i9505 I really dunno what other infos are as I don't understand much in this ..
freshkiller10 said:
Okay so my galaxy s4 can't boot, it is stuck at the Samsung Galaxy S4 logo forever, I can't enter Recovery mod when I try to, the samsung galaxy logo appears with the blue texts but sticks there forever, however I can still enter download mod and I have tried flashing it with multiple stock roms but couldn't get it to work ... I don't know much about these stuff so I really need your help guys, thank you in advance
PS: My phone is a GT-i9505 I really dunno what other infos are as I don't understand much in this ..
Click to expand...
Click to collapse
Hi mate,
Are you sure the flashing the stock went ok? , no errors? what Odins logs said?
Follow the procedure describe here
http://forum.xda-developers.com/showthread.php?t=2265477
MAX 404 said:
Hi mate,
Are you sure the flashing the stock went ok? , no errors? what Odins logs said?
Follow the procedure describe here
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
Yes bro Odin says Pass, I also flashed another phone same model the same way, works fine but couldn't get this one to work ..
freshkiller10 said:
Yes bro Odin says Pass, I also flashed another phone same model the same way, works fine but couldn't get this one to work ..
Click to expand...
Click to collapse
hi mate,
that is odd, the part that you cant not get into recovery is strange, did you try to flash a custom recovery and see is you could get into it? if so do a factory reset and see if it helps...
MAX 404 said:
hi mate,
that is odd, the part that you cant not get into recovery is strange, did you try to flash a custom recovery and see is you could get into it? if so do a factory reset and see if it helps...
Click to expand...
Click to collapse
Yes Tried Philz Touch and CWM but didn't work .. :/
freshkiller10 said:
Yes Tried Philz Touch and CWM but didn't work .. :/
Click to expand...
Click to collapse
Maybe is a hardware problem , is odd that you can get into download and not into recovery....check the push buttons, power , vol up and down maybe one of them is stuck.
MAX 404 said:
Maybe is a hardware problem , is odd that you can get into download and not into recovery....check the push buttons, power , vol up and down maybe one of them is stuck.
Click to expand...
Click to collapse
I don't think it is the buttons problem because when I try to enter the recovery mod the blue text appears on top left, do u have any idea what hardware-wise could be the problem ?
Did you try flashing the stock recovery in ODIN? If you can make it work do a factory reset then try flashing a stock ROM again. It sounds like something is corrupted, I have had the same problem many times and stock recovery can always fix it with a factory reset.
https://www.androidfilehost.com/?fid=22946563261204103
freshkiller10 said:
I don't think it is the buttons problem because when I try to enter the recovery mod the blue text appears on top left, do u have any idea what hardware-wise could be the problem ?
Click to expand...
Click to collapse
So you can get into recovery then? what happen when you get there? can you post a picture of it?
+1 @Hexgore
MAX 404 said:
So you can get into recovery then? what happen when you get there? can you post a picture of it?
+1 @Hexgore
Click to expand...
Click to collapse
No I can't, it sticks at this
http:/ /i.imgu r.com/0pB5CFd.png
Remove spaces cuz I can't post images sorry about that bro
Hexgore said:
Did you try flashing the stock recovery in ODIN? If you can make it work do a factory reset then try flashing a stock ROM again. It sounds like something is corrupted, I have had the same problem many times and stock recovery can always fix it with a factory reset.
https://www.androidfilehost.com/?fid=22946563261204103
Click to expand...
Click to collapse
Tried that and didn't work, tried custom recoveries as well .. :/
freshkiller10 said:
No I can't, it sticks at this
http:/ /i.imgu r.com/0pB5CFd.png
Remove spaces cuz I can't post images sorry about that bro
Click to expand...
Click to collapse
Cant read what it says in the corner......but that it does not look like recovery
Are you using the correct button conbination to get there?
MAX 404 said:
Cant read what it says in the corner......but that it does not look like recovery
Are you using the correct button conbination to get there?
Click to expand...
Click to collapse
Yes, Home button and Volume up and Power button, I let go the power button onces the blue text appears...
freshkiller10 said:
Yes, Home button and Volume up and Power button, I let go the power button onces the blue text appears...
Click to expand...
Click to collapse
What it says?
MAX 404 said:
What it says?
Click to expand...
Click to collapse
It says booting to recovery, it hangs there no matter how long i wait
freshkiller10 said:
It says booting to recovery, it hangs there no matter how long i wait
Click to expand...
Click to collapse
hi
running out of ideas...
did you try what post 8 said?
when you flashed the stock rom did you used a newer or same type of rom you had in the device? Odin will not let you flash stock rom with older bootloaders than the one that the device has.
Flash a stock firmware again, but this time, flash a PIT file at the same time as the stock ROM. Make sure to get the right PIT file for your phone model.
Remember to add the PIT file to Odin - If you flash your phone with repartition checked and no PIT file selected, you will break your phone!!
If you've been using custom ROMs, chances are that their partition layout is not a stock layout, and that would explain why flashing a stock ROM isn't working for you..
knuckles1978 said:
Flash a stock firmware again, but this time, flash a PIT file at the same time as the stock ROM. Make sure to get the right PIT file for your phone model.
Remember to add the PIT file to Odin - If you flash your phone with repartition checked and no PIT file selected, you will break your phone!!
If you've been using custom ROMs, chances are that their partition layout is not a stock layout, and that would explain why flashing a stock ROM isn't working for you..
Click to expand...
Click to collapse
I really dunno much about these things, can you provide me with the right PIT file? that'd be so much appreciated mate
To be honest mate, if you don't know what you're doing you really shouldn't be messing around with pit files. Please read up before flashing stuff.. Here's a good link for you:
http://forum.xda-developers.com/showthread.php?t=2265477
And here's your file, for when you're ready for it..
https://www.dropbox.com/s/t1lvy5oa5mxk3xh/I9505_pit_file.zip?dl=0
Flash the pit file at the same time as the stock firmware. If it still doesn't work then flash the pit file on its own after you've installed the stock firmware.
But most importantly, have a good read of that thread I linked you to.
Please post back, let me know how it goes..