Related
Hey, I'm stuck on boot screen, can only get into TWRP but that's it. I'm trying to go back to stock using the flashtool method but everytime I try to boot into download mode my phone immediately goes to Firmware Update screen and stuck there so lg tool gives error saying phone is disconnected. Anyone have any ideas what might be casing this? Thanks for any help
http://forum.xda-developers.com/showthread.php?t=2448960
but it will wipe it clean like if you got the phone again
lampardd said:
Hey, I'm stuck on boot screen, can only get into TWRP but that's it. I'm trying to go back to stock using the flashtool method but everytime I try to boot into download mode my phone immediately goes to Firmware Update screen and stuck there so lg tool gives error saying phone is disconnected. Anyone have any ideas what might be casing this? Thanks for any help
Click to expand...
Click to collapse
Hold the power button until you get a black screen. Download LG Mobile Support tool and the LG Drivers. Plug USB In and then hold the Power + Volume Up key. On your screen, click Upgrade Recovery. From there, you can do a factory reset through download mode of your phone.
lampardd said:
Hey, I'm stuck on boot screen, can only get into TWRP but that's it. I'm trying to go back to stock using the flashtool method but everytime I try to boot into download mode my phone immediately goes to Firmware Update screen and stuck there so lg tool gives error saying phone is disconnected. Anyone have any ideas what might be casing this? Thanks for any help
Click to expand...
Click to collapse
In case you did the latest firmware ota upd,there is a topic that can solve you problem as long as you can access TWRP(even if you didnt do the ota it will,i tried that myself) Here is what you need to do.
use TWRP's "terminal command" option to run the following:
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
You'll have to type that whole thing out, and be VERY careful with spaces and punctuation. One wrong letter and you could nuke your phone.
This will probably fix you problem when it has to do with any update.
Thanks for the responses. I finally fixed it.. I started the procedure from scratch with a new laptop and somehow it worked lol
Sent from my LG-D802 using xda app-developers app
Hey,
I also have a lg g2 with android 4.4.2. I wanted to update it to android 5.0 with lg pcsuite. all was fine until there was an error, while my phone was in download mode. then lg pc suite said i should disconnect my phone
from the computer and then reconnect it and restart it. so i did but when I restarted the phone it was still in download mode and now lg pc suite says that it cant connect. Now when i start my phone it stays in the download mode.
My phone isnt rooted or smth else.
Can someone please help?
Frozen at frimware update and device doesnt get detected
Hi,
i have got the same situation now.
I tried to use LG support tool, it detects my phone but it shows that I havent enough memory to do restore.
How to erase some space when my phone is in download mode ?
Doing Restore upgrade errors using PC Suite, but it stops after approx 40%.
Hard reset doesnt work.
Thank you,
bananatuner said:
Hey,
I also have a lg g2 with android 4.4.2. I wanted to update it to android 5.0 with lg pcsuite. all was fine until there was an error, while my phone was in download mode. then lg pc suite said i should disconnect my phone
from the computer and then reconnect it and restart it. so i did but when I restarted the phone it was still in download mode and now lg pc suite says that it cant connect. Now when i start my phone it stays in the download mode.
My phone isnt rooted or smth else.
Can someone please help?
Click to expand...
Click to collapse
It happened to me and now phone hanged in download mode and can not connect to pc. Did you have a solution?
Solve
Guys! I had the exact same problem today. My solution was to keep pressing the "try again" button every time the error appeared on my computer screen. It took some time but the error was appearing at different levels each time in this order : 45% 57% 65% 80% and next the instalation was completed. If it doesn't work try switching to another computer if you can. After the firmware update hits 100% your phone will restart and the LG logo will appear(the led changes its color during this process). At this point you have to just wait a while. Then a dialog box will appear saying that the applications on your phone are configuring themselves. After that your phone will start and work normaly. The cause of the error is the lack of memory on your phone. If those idiots working for LG would say "YOU DON'T HAVE ENOUGH STORING SPACE" this stuff would not happen.
The phone is not rooted!(IMPORTANT)
Phone name: LG G2
Phone model: D802
Old software: 4.4.2 (KitKat)
Actual software: 5.0.2 (Lollipop)
I hope this hellped you solving the problem.
My lg optimus exceed 2 will only display on screen firmware update which is froze the phone won't do anything Please Help! !!!!
Turn of the phone and enter to download mode again and try flash to stock kdz file with lg flash tool
I had same problem "firmware update", simple just remove the battery and sim for 15 sec. then put it back and restart.
Hello
I can't access my LG g2 after trying to wipe the system and it runs on frozen screen. Kindly help out please
My LG x power died and I went to plug it in and a screen popped up saying,"Firmwire Update 0%", so I kept it plugged in for the next half an hour, and it still said 0%. I've tried resetting it and powering it off but nothing seems to be working. What do I do?
Andylag44 said:
Hello
I can't access my LG g2 after trying to wipe the system and it runs on frozen screen. Kindly help out please
Click to expand...
Click to collapse
Download lg flash tool.
Download lg g2 stock firmware.
Press volume up button and insert usb cable. You will see download mode.
Open lg flash tool and flash the kdz( original firmware) through flash tool.select cse flash.
My LG V20 got stuck on the Firmware Update screen. It appears every time I restart the phone and I have to take the battery out. If I start the phone plugged in it starts normally. I was able to do a factory reset, the phone started normally a few times without being plugged in, now it's back to the Firmware screen. I can use the phone but need to restart when it's plugged in. I hope Oreo Update will fix it. I don't know much about updates, but do big updates like that reinstall the drivers as well?
Hello everyone I also have this kind of experience so many times in my g2 mini.stuck on Firmware update. What I’m doing is,
1. remove the battery to turn it off. Plug your charger and before plugging it to your phone hold the volume down and plug in until tou see the android is updating; or
2. Just simply hold the powerbutton + volume down until you see Android is updating.
I would love to see your feedback if it helps.
Hi there!
So I rooted my LG G2 (D802, 4.4.2, Stock, used ioroot) yesterday.
I intend(ed) to flash the Optimus G3 Rom, in the start post they recommended to flash cmw/twrp via "Simple Tool 3.2" (http://forum.xda-developers.com/showthread.php?t=2633941). After doing so (I used the automated version, not the manual one) I got STUCK ON THE BOOTSCREEN. There is a notification popping up for a few seconds in the left upper corner which lists several errors occurring:
BOOT CERTIFICATION VERIFY
SECURE BOOTING ERROR;
CAUSE: BOOTCERTIFICATION VERIFY
along with the following numbers listed from top to bottom: 710, 760, 810, 860, 910, 960 (I just noticed, the numbers can vary, but always follow the same pattern...)
after this message, the screen fades to black, I think it it is still running though, since it takes more than 10 seconds to reboot the phone by pressing the power button. I still have access to the button down/power button combo which leads to a factory reset setting, but it doesnt do anything for me since I still get stuck at the lg boot screen.
I
Atm I dont what to do! Enter download mode and flash something? I'm seriously kind lost here. So, thank you for your help!
Cheers
You flashed a custom recovery version thad doesin't match you phone ( example you flashed D801 recovery on D802 phone )
Just search in Q/A and you find the solution to fix it. Be calm , if you phone is booting - you can fix it
If you are lazy , i searched it for you. http://forum.xda-developers.com/showthread.php?t=2694530
harkis123 said:
You flashed a custom recovery version thad doesin't match you phone ( example you flashed D801 recovery on D802 phone )
Just search in Q/A and you find the solution to fix it. Be calm , if you phone is booting - you can fix it
If you are lazy , i searched it for you. http://forum.xda-developers.com/showthread.php?t=2694530
Click to expand...
Click to collapse
Thanks a ton!! Finally I can put a name on the problem (bricking...)- Ironically I never mangaged to get there in 3years of samsung flashing but got there within 15mins of flashing on the LG G2. I guess it's true what they say about samsung devices, as hard to brick as a brick...
I'll report back if it worked...
Weeell, as it turns out my phone isn't recognized by my pc (Win 7) anymore...I literally can't do anything. Any hints?
I can use the Tool, but it's always trying to connect to my phone without success. But when I connect my phone to the computer it opens a dropbox window (import photos) and several windows partitions, which it tells me to format...
thechillerdewd said:
Weeell, as it turns out my phone isn't recognized by my pc (Win 7) anymore...I literally can't do anything. Any hints?
I can use the Tool, but it's always trying to connect to my phone without success. But when I connect my phone to the computer it opens a dropbox window (import photos) and several windows partitions, which it tells me to format...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2687768
Hi all
First of all sorry for asking this question but after search for hours I have come across no answers.
My device wont boot, it gets stuck on the LG logo. I also cant seem to boot in Download mode to restore back to stock. The device in a G2 International and is unlocked. I have installed PC drivers etc but will not work. I turn off device completely, even tried disconnecting battery on mother board, and pressed up to boot in DL mode but it will not work just boot into LG logo again. Now i CAN get in the restore hard reset screen by pressing power and V down but it stays on the device restore screen after I have pressed power button a couple of times. Also PC will now see device when in this mode either.
Any help or pointing in the right direction would be a lot of help.
Attached are two images
Thanks You XDA community
Rueben
Rueben_ said:
Hi all
First of all sorry for asking this question but after search for hours I have come across no answers.
My device wont boot, it gets stuck on the LG logo. I also cant seem to boot in Download mode to restore back to stock. The device in a G2 International and is unlocked. I have installed PC drivers etc but will not work. I turn off device completely, even tried disconnecting battery on mother board, and pressed up to boot in DL mode but it will not work just boot into LG logo again. Now i CAN get in the restore hard reset screen by pressing power and V down but it stays on the device restore screen after I have pressed power button a couple of times. Also PC will now see device when in this mode either.
Any help or pointing in the right direction would be a lot of help.
Attached are two images
Thanks You XDA community
Rueben
Click to expand...
Click to collapse
You didn't specify if you were using a Windows PC, or a Linux OS. A Linux operating system could see the device even when Windows doesn't. Using Linux and the ADB toolkit - I would push a custom recovery to the device and then reboot into the new recovery. After that it should be easy to mount the device and install a new ROM.
Ah! Reading again, I see "installed drivers", so you must be using Windows. Try using Linux.
Thanks, so I tired the unbrick method of short circuiting the mother board and then using linux to see the partions push aboot, boot and laf img this allowed me to boot into download mode and then using flash tool to flash a UK based 4.2.2 ROM the device is now working perfectly. Thanks for you help. MOD you can close this thread now.
Link for method I used here.
Hi,
I have a LG G2 D800 (ATT Black version) which I was running with cm 11 for a long time.. Last week I got curious and tried to install CM12 on it and that's where started my nightmare.
To begin with, I think I flashed the wrong twrp version (d802) instead of d800.. So I was stuck for a while.. I finally was able to recover from that and Installed CM12. The install went ok, but the phone would freeze and turn off.. It wouldn't turn back on unless I did a soft reset.. I tried a few times and then gave up.. With the nandroid backup that I had, I went back to cm11, but the problem started to follow me in CM11 as well.. The phone was constantly rebooting.. Sometimes the phone would stay on for 2-3 hours and sometimes it wouldn't stay on for 2 minutes.. So I got frustrated and went thru' different threads and finally went back to Stock Rom using the LGFlashtool method.. In stock rom, the phone booted up fine, but the rebooting issue started happening there as well.. The phone was definitely much stable under stock rom than CM11/CM12 but it won't still power off all of a sudden and I could go a couple of hours before noticing that it had turned off.. Frustrated with it, I started all over again to root and install twrp and that's when it went from Bad to worse.. Something happened with my TWRP flash and I was not able to go to recovery or download... I was stuck...
I tried several methods. 1 ) Using ubuntu was my first try.. I followed the initial steps (ls devices and gdisk -l command) and after I ran the first step (dd if=/home/med/Desktop/sbl1.img of=/dev/sdb2), my phone went into fastboot mode and ubuntu couldn't recognize my device. after that.. I couldn't run the remaining commands..
2) since I was stuck in fastboot, I followed the fastboot method from another thread by downloading the fastboot and laf.img.... The phone was responding and said recovery erased successfully, but it kept going back to fastboot.. When I tried a different laf.img file, that's when the phone rebooted and now wouldn't turn on at all..
No LG image, no recovery, no response.. I've tried all button combinations (holding vol down and power, power alone, all 3 buttons, vol+ and power)... nothing happens with the phone... Windows doesn't recognize the phone.. It says 'lg g2 qhsusb_bulk' but that's pretty much it..
Atleast until today morning I had a LG image flashing that tells me that the issue is a software / partition issue.. Now I don't know if I have fried something..
I bought the fone in november 2013 and hence its out of warranty.. . I'm not eligible for upgrade till November and I'm stuck with using a iphone 4s (ouch...) until then... It sucks big time to go from the g2 to the 4s... any thoughts or ideas?
I had the same problem when I flashed the wrong kernel.... This link helped me http://forum.xda-developers.com/showthread.php?t=2582142 one of these 7 solutions should help you....
I found this link on YouTube which is exactly like your case
http://m.youtube.com/watch?v=_d5b_osUTug
And the second link which I didn't try is
Sent from my Lightning D802 G2
Supracer said:
I had the same problem when I flashed the wrong kernel.... This link helped me http://forum.xda-developers.com/showthread.php?t=2582142 one of these 7 solutions should help you....
I found this link on YouTube which is exactly like your case
http://m.youtube.com/watch?v=_d5b_osUTug
And the second link which I didn't try is
Sent from my Lightning D802 G2
Click to expand...
Click to collapse
Thanks. I looked into that thread before. Unfortunately in my case the phone is not recognized in adb or fastboot. Adb shows no device listed whereas fastboot says waiting for device.
Lg flashtool doesnt do anything either.
Only thing is that fone was showing up as unknown device and by me pressing vol up and power and vol down, it shows up as qhusb bulk..
askthiru said:
Thanks. I looked into that thread before. Unfortunately in my case the phone is not recognized in adb or fastboot. Adb shows no device listed whereas fastboot says waiting for device.
Lg flashtool doesnt do anything either.
Only thing is that fone was showing up as unknown device and by me pressing vol up and power and vol down, it shows up as qhusb bulk..
Click to expand...
Click to collapse
Go to the Device Manager => device properties of the "unknown device" => Details => Hardware ID and search the value on the internet for a driver... Maybe with a driver you can get the phone to be recognized
Folks,
I finally was able to get my G2 working from a hard brick..
My final non working symptom : Blank Screen.. No download.. No recovery.. No LG logo… Windows was showing device as unknown device sometimes and sometimes as qhusb_bulk.
Steps that I followed: You need to know how to use fastboot.
1) Kept trying different combinations of the 3 buttons (power, vol + and Vol -). The one that worked for me was to unplug the phone from pc… Press all 3 buttons together for 15-20 seconds and will keys pressed, plug into the PC.
2) This put me in the fastboot mode.. Here I tried flash laf.img with several laf files. My phone was a lg g2 d800 (ATT variant). Nothing really worked..
3) So I downloaded the Stock Rom files (aboot, boot, dbi, laf, misc, modem, persist, recovery, rpm, sbl1, and tz images) from http://downloads.codefi.re/autoprime/LG/LG_G2). I flashed all these files using Fastboot and then after flashing, rebooted the phone.
4) The phone automatically went into AT&T update and at 3% failed with an error and booted into safe mode. (This is probably because when it got bricked, I accepted a OTA update on a rooted phone and I didn’t have twrp recovery either).
5) I came out of safe mode and booted normally and voila, I got the stock rom 4.2.2 on my phone.
Thanks so much to the various threads in XDA developers that I was able to fix this.. Much thanks to etm34 for this thread: http://forum.xda-developers.com/showthread.php?t=2681089
Also to Partager.info for this thread: http://forum.xda-developers.com/showthread.php?p=48765620#post48765620
And cms88168 for this thread http://forum.xda-developers.com/showthread.php?t=2477595
I had to use all these 3 threads above to get my g2 back to working..
Thanks for sharing
askthiru said:
Folks,
I finally was able to get my G2 working from a hard brick..
My final non working symptom : Blank Screen.. No download.. No recovery.. No LG logo… Windows was showing device as unknown device sometimes and sometimes as qhusb_bulk.
Steps that I followed: You need to know how to use fastboot.
1)Kept trying different combinations of the 3 buttons (power, vol + and Vol -). The one that worked for me was to unplug the phone from pc… Press all 3 buttons together for 15-20 seconds and will keys pressed, plug into the PC.
2)This put me in the fastboot mode.. Here I tried flash laf.img with several laf files. My phone was a lg g2 d800 (ATT variant). Nothing really worked..
3)So I downloaded the Stock Rom files (aboot, boot, dbi, laf, misc, modem, persist, recovery, rpm, sbl1, and tz images) from http://downloads.codefi.re/autoprime/LG/LG_G2). I flashed all these files using Fastboot and then after flashing, rebooted the phone.
4)The phone automatically went into AT&T update and at 3% failed with an error and booted into safe mode. (This is probably because when it got bricked, I accepted a OTA update on a rooted phone and I didn’t have twrp recovery either).
5)I came out of safe mode and booted normally and voila, I got the stock rom 4.2.2 on my phone.
Thanks so much to the various threads in XDA developers that I was able to fix this.. Much thanks to etm34 for this thread: http://forum.xda-developers.com/showthread.php?t=2681089
Also to Partager.info for this thread: http://forum.xda-developers.com/showthread.php?p=48765620#post48765620
And cms88168 for this thread http://forum.xda-developers.com/showthread.php?t=2477595
I had to use all these 3 threads above to get my g2 back to working..
Click to expand...
Click to collapse
Happy to see you solved.
All,
Even though I resolved my bricked G2, it is still giving me issues by turning off automically after a while... It looks like a hardware failure to me where it ceases to operate at times.. The phone has stayed on sometimes for an entire day and sometimes it goes off in 5 minutes.. I'm sending it to LG repair service.. Hopefully they fix it for me under warranty (even though it has been 13 months since i bought it)..
i have an LG G2 D800, sometimes when i plug it to charger it turns on for a few seconds and shows the boot certification verify error along with the LG logo, then the screen goes black and cant do anything, pc doesnt recognize it.
i tried going into download mode (hold vol+ when connecting to pc) but nothing happens, sometimes it just turns on but show again that Boot Certification verify error and then the same black screen... Pc doesnt recognize anything (not even that qhsusb_bulk in device manager)...
what can i do?
Can you get into recovery? I literally had that same error today.
fischer12345 said:
Can you get into recovery? I literally had that same error today.
Click to expand...
Click to collapse
no, sometimes when i make the vol- and power combo, i get the white screen with the yes/no option. then i select Yes and get the LG logo with the error, and black screen again
Abrilabr said:
no, sometimes when i make the vol- and power combo, i get the white screen with the yes/no option. then i select Yes and get the LG logo with the error, and black screen again
Click to expand...
Click to collapse
am not sure basically going into download and flashing TOT. maybe you need to short motherboard.. check the thread no download no recovery in my signature look for it there.
raptorddd said:
am not sure basically going into download and flashing TOT. maybe you need to short motherboard.. check the thread no download no recovery in my signature look for it there.
Click to expand...
Click to collapse
im going to use SRKTools and see what happens... i dont think it could be a damaged motherboard, since it turns on.. just that fricking error and black screen
Abrilabr said:
no, sometimes when i make the vol- and power combo, i get the white screen with the yes/no option. then i select Yes and get the LG logo with the error, and black screen again
Click to expand...
Click to collapse
I know exactly what you are talking about hmm...
I was gonna suggest if you can get in recovery you could flash another rom and the problem would be solved, but its different in your case. You said your computer doesn't recognize your phone as well? I would assume you have the proper drivers for your device.
If you are able to get into download mode I suggest you use this guide: http://forum.xda-developers.com/showthread.php?t=2432476 to get back to stock..
I am not sure why you aren't able to get into recovery, but that's my suggestion. What did you do prior to this error popping up?
If all else fails then I would contact LG and try to convince them to send in your phone for repair, just a thought.
I've done a motherboard replacement on my G2 and in that case it was totally hard bricked. It is not a motherboard error so you would not need to go there.
raptorddd said:
am not sure basically going into download and flashing TOT. maybe you need to short motherboard.. check the thread no download no recovery in my signature look for it there.
Click to expand...
Click to collapse
ok, i did the short of motherboard and now pc recognizes it as qhsusb_bulk in device manager, but i cant see the many partitions that should be there... what now?
Abrilabr said:
ok, i did the short of motherboard and now pc recognizes it as qhsusb_bulk in device manager, but i cant see the many partitions that should be there... what now?
Click to expand...
Click to collapse
go into download mode and use TOT or KDZ and flashtools. good luck
you said AT&T d800? i used this.
http://forum.xda-developers.com/showthread.php?t=2663369
Okay, heres the thing
I was able to short motherboard and got 9008 mode, used the BoarDiag method and it installed everything. But now, everytime i try to boot into download mode, phone does get into download mode but shuts off after few seconds.. So i cant install ROM from LG Flashtool, what now?
edit: now everytime i disconnect battery, connect it again, and connect it to pc or wall charger, it stays for a moment at LG logo and turns off, but cant seem to get to download mode... tried disconnecting batt and connecting again, then hold vol+ while connecting usb and it stays again awhile in LG logo, but no download mode, it just turns off again...
edit 2: Well, now it doesnt show Download mode for a few seconds... if i keep pressed power button for aroun 30/35secs and connect it to pc, it just shows LG logo for like 10 seconds and turns off, nothing else, not even doing the power button thing and keep vol+ when connecting...
okay, heres the thing now:
i used BoarDiag with d802 files and could get to download mode to flash d802 firmware TOT. it boots to lg logo and shuts down after few seconds.. then i tried the same with d800 TOT, and it does the same...
with d800 TOT sometimes it flashes an android green logo with some loading lines under it for like 3seconds and shuts down
Abrilabr said:
okay, heres the thing now:
i used BoarDiag with d802 files and could get to download mode to flash d802 firmware TOT. it boots to lg logo and shuts down after few seconds.. then i tried the same with d800 TOT, and it does the same...
with d800 TOT sometimes it flashes an android green logo with some loading lines under it for like 3seconds and shuts down
Click to expand...
Click to collapse
2 things try it with different computer ,different usb port. or llast post this question in the goign back to e=stock am pretty the guy hyalton will help you get thru..