Hi, I want to flash a KDZ file but the when I get to Download mode its stuck on 0%
I installed all the drivers and even PC suit but nothing works
the phone is LG G2 D802 with stock 4.2.2 , root + twrp 2.7.1 , everything work fine except download mode
thanks
If I remember well you must disconnect and reconnect usb with power and vol down pressed to start flashing
siggey said:
If I remember well you must disconnect and reconnect usb with power and vol down pressed to start flashing
Click to expand...
Click to collapse
Reinstalled drivers (again...) thanks
are you change the port in device manage on your pc? change it to 41 port
Related
Sup guys, I've got a following problem, basically when I connect my Galaxy 3 to USB port Odin detects is as COM3, however this is when phone is turned on, then when I switch device off and proceed to download mode (power + home + vol+), Odin doesn't detect the phone. I do have Kies and drivers installed, anyone can think of what might be wrong?
EDIT:
Also when I press power + home + vol- combo, Odin doesn't detect device either.
when your phone is off, try power button + vol+ + home button.
unrender said:
when your phone is off, try power button + vol+ + home button.
Click to expand...
Click to collapse
Hmm, thanks for the hint but "Forced upload" doesn't work either.
make sure kies isn't running, check the processes to make sure, then open odin and try. A few attempts at recognition might be needed and is not uncommon
stubborn_d0nkey said:
make sure kies isn't running, check the processes to make sure, then open odin and try. A few attempts at recognition might be needed and is not uncommon
Click to expand...
Click to collapse
Just as you said, I checked running processes and Kies is not running. Device still isn't recognised by Odin.
Also I have't said that before but when I said that phone is detected by Odin when turned on, is when I set USB to Modem by calling *#7284#, otherwise when I set it to PDA, Odin doesn't even detect the device when turned on, neither when off.
Could it be because of my old computer operating system? (Windows XP Professional SP 3 32Bit)
marakeh said:
Sup guys, I've got a following problem, basically when I connect my Galaxy 3 to USB port Odin detects is as COM3, however this is when phone is turned on, then when I switch device off and proceed to download mode (power + home + vol+), Odin doesn't detect the phone. I do have Kies and drivers installed, anyone can think of what might be wrong?
EDIT:
Also when I press power + home + vol- combo, Odin doesn't detect device either.
Click to expand...
Click to collapse
Before going into download mode:
Switch the cell off..pull the usb out..get into download mode..plug the usb in..should be detected..
Sent from my Rooted Gingerbread Edition G3 !
Rapier07 said:
Before going into download mode:
Switch the cell off..pull the usb out..get into download mode..plug the usb in..should be detected..
Sent from my Rooted Gingerbread Edition G3 !
Click to expand...
Click to collapse
Ahh... I tried this aswell but without any result, I guess, I'll have to wait for offical Froyo via Kies, unlucky heh.
EDIT:
Is there any other Firmware flashing solution for Galaxy 3 or just Odin?
marakeh said:
Ahh... I tried this aswell but without any result, I guess, I'll have to wait for offical Froyo via Kies, unlucky heh.
Click to expand...
Click to collapse
Try using another computer maybe u might get lucky
Sent from my Rooted Gingerbread Edition G3 !
Try updating your kies and see......maybe its a driver issue....
Sent from my Lestatious v1.2 Galaxy 3
Hi, I was flashing my LG when the flashing tool stopped at 63% and showed some error, i tried to flash again but it gave me error 502.
I turned off the phone and tried to turn it on again, the screen wont turn up but the PC detects the LG (zune doesn't).
I've tried to put it on emergency download mode with vol- + camera + power but the tool stills says error 502.
Is it recoverable or is it lost?
Update: I was able to recover it! I tried to enter emergency download mode with the battery out but connected to the pc, then i inserted the battery and the LG flashing tool recognized it!
Took 5 minutes to flash it. (I used the vol- + camera + power to enter emergency download mode).
Good to know and happy for you resolving your issue
bricked
@Cafetal
Can you tell me the cable used for flasing
cable no
1) BJAY0023711 cable with on/off switch
2) SGDY0014302 plain usb user cable
3) RAD32167835 cable with switch for 56k & 910k
As i am having a bricked LGE900 in hand ,your reply will be usefull
Thanks in advance
Problem solved by using plain old USB Cable and LGDP2
kayanvv
So yesterday my phone down,i changed rom like always via CWM for another then i wanna add sdmerge mod and i start flash step1 and step2 after step 2 my phone dead,dont know what happen,I will try with KDZ and LG Support Tool,but problem is my phone not connecting with my computer and flash cant start at all,even recovery dont wanna start.Already after connect my phone to computer i have sound when sth be connected but my computer dont know what i connect,i used driver usb from lg site and till yesterday this drivers works very well.
What can i do now,any solutions for that ?
adim66 said:
So yesterday my phone down,i changed rom like always via CWM for another then i wanna add sdmerge mod and i start flash step1 and step2 after step 2 my phone dead,dont know what happen,I will try with KDZ and LG Support Tool,but problem is my phone not connecting with my computer and flash cant start at all,even recovery dont wanna start.Already after connect my phone to computer i have sound when sth be connected but my computer dont know what i connect,i used driver usb from lg site and till yesterday this drivers works very well.
What can i do now,any solutions for that ?
Click to expand...
Click to collapse
Actually try to enter Emergency Mode and flash ROM with EMERGENCY mode. volume up + volume down + Power at the same time
Hi guys! I am having problems with my phone. I am now running on cm 10 and the problems are: boot image crashed, cant boot into cwm recovery, always boot loop, cant get into download mode, and cant detect sim card. Any solutions?? Thanks
Shao Merng said:
Hi guys! I am having problems with my phone. I am now running on cm 10 and the problems are: boot image crashed, cant boot into cwm recovery, always boot loop, cant get into download mode, and cant detect sim card. Any solutions?? Thanks
Click to expand...
Click to collapse
Can you get it into battery charging mode ?
If you can get there, KDZ software will switch it to Download Mode when you attempt to flash firmware.
I am not sure as my boot animation is damaged no matter what mode I boot into. The problems began when I flashed a v20 baseband
Sent from my LG-E610 using XDA Free mobile app
radio image which is initialized before kernel is damaged
it doesnt interefere with bl or download mode however
- unplug usb cable.
- remove battery.
- hold vol - pressed.
- while doing so, connect usb cable.
- does it get into download mode ?
or try
- unplug usb cable.
- remove battery.
- hold vol - and + pressed.
- while doing so connect usb cable.
- does it get into download mode ?
let me know if either of those does anything.
If any of those work and kdz flash doesn't fix there's still hope, let me know how it goes, you might need a modified firmware dll aswell.
Good luck
freeusername said:
- unplug usb cable.
- remove battery.
- hold vol - pressed.
- while doing so, connect usb cable.
- does it get into download mode ?
or try
- unplug usb cable.
- remove battery.
- hold vol - and + pressed.
- while doing so connect usb cable.
- does it get into download mode ?
let me know if either of those does anything.
If any of those work and kdz flash doesn't fix there's still hope, let me know how it goes, you might need a modified firmware dll aswell.
Good luck
Click to expand...
Click to collapse
nope...tried both. doesnt work...
Hi i just bricked My LG g2 F320L it show white screen saying critical error demigod Crash No recovery No Download mode
DemiGod Crash Handler : Critical Error!
Press Key to Choose Dload Mode or Reboot
1) Volume up : Dload Mode.
2) Volume Down: Reboot.
if i choose Dloade mode pc recognize it as Lge Androindnet USB serial port
i tried flashtool but no result becasue i cant acces download mode
i also tried the solution with abd that is on youtube but when i come to the first command it stay on waiting for device i think because it's recognized as Lge Androindnet USB serial port and not as QHSUSB_BULK
also tried SRKtool 2.1 no result
can anyone help
thank you
just tried the following tip shut down completely the phone by removing battery reput it press vol+ button and connect to micro usb in same time
i entered download mode flashed official rom and all work fine now
d4rk175 said:
just tried the following tip shut down completely the phone by removing battery reput it press vol+ button and connect to micro usb in same time
i entered download mode flashed official rom and all work fine now
Click to expand...
Click to collapse
The phone does not feature a removable back plate...
AndroidHacker99 said:
The phone does not feature a removable back plate...
Click to expand...
Click to collapse
The f320 offer it