So yesterday my phone down,i changed rom like always via CWM for another then i wanna add sdmerge mod and i start flash step1 and step2 after step 2 my phone dead,dont know what happen,I will try with KDZ and LG Support Tool,but problem is my phone not connecting with my computer and flash cant start at all,even recovery dont wanna start.Already after connect my phone to computer i have sound when sth be connected but my computer dont know what i connect,i used driver usb from lg site and till yesterday this drivers works very well.
What can i do now,any solutions for that ?
adim66 said:
So yesterday my phone down,i changed rom like always via CWM for another then i wanna add sdmerge mod and i start flash step1 and step2 after step 2 my phone dead,dont know what happen,I will try with KDZ and LG Support Tool,but problem is my phone not connecting with my computer and flash cant start at all,even recovery dont wanna start.Already after connect my phone to computer i have sound when sth be connected but my computer dont know what i connect,i used driver usb from lg site and till yesterday this drivers works very well.
What can i do now,any solutions for that ?
Click to expand...
Click to collapse
Actually try to enter Emergency Mode and flash ROM with EMERGENCY mode. volume up + volume down + Power at the same time
Related
Like topic says. Was doin' it via LG PC Suite. Now it's only LG logo on my phone. Any ideas what should I do?
Are you planning to install custom ROMs on your phone?
If so, check this out:
http://forum.xda-developers.com/showpost.php?p=16783348&postcount=1
Instead of doing this:
Prepare the phone by enabling USB Debugging by going to Settings>Applications>Development>Enable USB Debugging and connect the phone to the computer via USB cable and let Windows install any drivers it needs.
Click to expand...
Click to collapse
Do this instead:
Hold down volume down and plug in the USB cable and 'download mode' should come up on the screen. Let windows install any drivers it needs. Then launch software update.
Click to expand...
Click to collapse
Hope it fixes your problem and device
Same thing happened to me, bricked my device, took it to phone shop they flashed the board and it worked again, think i could have just entered download mode and reinstalled but, i was a noob then still am tbh
Just put your phone into download mode.
Flash fastboot.
Then reflash your ROM!!
ALL DONE XD
Any
You can flash any ROM you want via fastboot and any failed attempts won't completely brick your phone.
Sorry for my English I will try to explain my problem.
After rooting everything was fine, but when I try to flash stock firmware somethings happen.First problem is that my PC cannot detect the phone with Odin and adb or mass storage I am 100% sure that the problem are not the drivers because I root that phone on the same PC before a week and of course I try everything on a another computer, but without success.
Download mode Odin cannot detect the phone! after many attempts to fix usb problem now the phone cannot boot , only in recovery (loop)after every start it's show recovery with message
Filesystems:
system: rfs
data: rfs
cashe: rfs
maybe system, data and cache files are erased I don't know.
recovery version is 0.1.3.b5
How can I flash stock firmware without PC. For example HTC devices can flash from SD card - Gold card, and PB99IMG.zip (I can't explain very well what I mean sorry)
Maybe the phone is usb bricked !
working..
recovery - only recovery
Download mode Volume Down + power off + camera ) - but cannot connect to PC and Odin.
not working
after flashing new costume ROM - the same thing - reboot to recovery
installed software on pc
android SDK,Kiesmini_1.0.0.10075_1,Samsung PC studio 1.5.1.10064_2,Drivers for spica on (Windows 7 x86)
really I cant find post like this !!! and sorry for my English
If you can go to download mode and phone is not detected, then you have bad drivers or bad usb in PC. Try another PC.
I have 3 pc and 2 cables and the same problem cannot detect. Can I flash new stock firmware without odin ?
godhamer said:
I have 3 pc and 2 cables and the same problem cannot detect. Can I flash new stock firmware without odin ?
Click to expand...
Click to collapse
Have you tried different USB ports, specifically one on the back of the PC?
Sent from a state of Serendipity
I told you that the problem is not drivers.Before week I flash another Samsung without problems. I think the problem is USB brick or something else
I HAVE DRIVERS
Help please !!!!!!!!!!!!!
reinbeau said:
Have you tried different USB ports, specifically one on the back of the PC?
Sent from a state of Serendipity
Click to expand...
Click to collapse
godhamer said:
I told you that the problem is not drivers.Before week I flash another Samsung without problems. I think the problem is USB brick or something else
I HAVE DRIVERS
Help please !!!!!!!!!!!!!
Click to expand...
Click to collapse
Calm down. Did you read what I posted above? I said nothing about drivers. Have you tried other USB ports? Most people find the ports on the back of the CPU work the best, not ones on the front, or on a hub. It does make a difference.
Hi, I want to flash a KDZ file but the when I get to Download mode its stuck on 0%
I installed all the drivers and even PC suit but nothing works
the phone is LG G2 D802 with stock 4.2.2 , root + twrp 2.7.1 , everything work fine except download mode
thanks
If I remember well you must disconnect and reconnect usb with power and vol down pressed to start flashing
siggey said:
If I remember well you must disconnect and reconnect usb with power and vol down pressed to start flashing
Click to expand...
Click to collapse
Reinstalled drivers (again...) thanks
are you change the port in device manage on your pc? change it to 41 port
Hello. Few months ago I installed unofficial Cyanogenmod 11 on my E610. After updating baseband it worked perfectly. After some time I decided to restore my phone to the state after installing CM11. It worked no problem. Today I wanted to do the same, and after installing SuperSU and Texdroider DPI I rebooted my cellphone, and it stucks on the cyanogenmod boot logo. If I try to get to recovery mode it stucks on the LG logo instead of CM. Hard reset is not happening at all. I tried to connect my phone via LG User Support Tool and install kdz firmware, but no luck. Although when I connect my phone without the battery to my PC i hear the "ding" windows sound, and phone exists in device manager. It also creates some disc drive in my computer, but unfortunately it's empty. I think textdroider has changed the build.prop file, so the cyanogenmod is not able to start at all. Is there any possibility to get to the build.prop file and change it, so phone will start? Or maybe somehow I can reset my phone or reinstall firmware using my USB cable without entering usb debug or recovery mode? Thanks in advance for any idea :crying:
Put your phone in Emergency Download Mode : switch it off, hold volume down button while plugging USB cable (already connected to the PC).
Then use the Support Tool to go back to LG ROM
mikesrike said:
Hello. Few months ago I installed unofficial Cyanogenmod 11 on my E610. After updating baseband it worked perfectly. After some time I decided to restore my phone to the state after installing CM11. It worked no problem. Today I wanted to do the same, and after installing SuperSU and Texdroider DPI I rebooted my cellphone, and it stucks on the cyanogenmod boot logo. If I try to get to recovery mode it stucks on the LG logo instead of CM. Hard reset is not happening at all. I tried to connect my phone via LG User Support Tool and install kdz firmware, but no luck. Although when I connect my phone without the battery to my PC i hear the "ding" windows sound, and phone exists in device manager. It also creates some disc drive in my computer, but unfortunately it's empty. I think textdroider has changed the build.prop file, so the cyanogenmod is not able to start at all. Is there any possibility to get to the build.prop file and change it, so phone will start? Or maybe somehow I can reset my phone or reinstall firmware using my USB cable without entering usb debug or recovery mode? Thanks in advance for any idea :crying:
Click to expand...
Click to collapse
in these cases emergency mode should work
removing battery sim sd etc... connect your phone to the pc throught us cable pressing vol- it automatically boot into download mode and you can easily use kdz.
make sure you have the last driver from lg websites else kdz wont find your phone, and set emergency option in kdz everything else it similar to a normal flash
I tried to downgrade from Kitkat to JB via flashtool this morning which I often successfully flashed with the same method. But while the flashing is going on and almost finish the flashing (system.img, userdata.img, etc. are already flashed), there seems to be some problem and popped out that the flashing is fail. And then the device does not boot up. While I tried to reconnect the device to PC, the PC cannot recognize the device as shown in the picture. Unable to process any further method. Does anyone in this forum knows how to recover the bricked device like this?
The phone starts? In a black screen?
If the PC detects it like that the phone has some energy and connection...
Does anything apears on the screen? Can you go to the Recovery Mod?
Have you tried to force the driver installation on that USB item that appears on device manager?
Do you have access via ADB or fastboot?
Did you nottest in what partition did the error message appeared?
Please provide some answers to these questions so i can try to help you...
RSGI_PT said:
The phone starts? In a black screen?
If the PC detects it like that the phone has some energy and connection...
9Does anything apears on the screen? Can you go to the Recovery Mod?
Have you tried to force the driver installation on that USB item that appears on device manager?
Do you have access via ADB or fastboot?
Did you nottest in what partition did the error message appeared?
Please provide some answers to these questions so i can try to help you...
Click to expand...
Click to collapse
Nothing on the screen. Not able to boot into recovery or adb is not working. The phone is just death. But, when I insert the usb cable, the pc can detect it. I even approach the Customer Care here in Aizawl, but they cannot fixed. Even when I followed the instruction as per one xda member posted here, The qualcom hs - 9006/8 is displayed on the device manager and when I tried to flashed it with emergency mode, the result always the same. FAILS
hruaiapunte said:
Nothing on the screen. Not able to boot into recovery or adb is not working. The phone is just death. But, when I insert the usb cable, the pc can detect it. I even approach the Customer Care here in Aizawl, but they cannot fixed. Even when I followed the instruction as per one xda member posted here, The qualcom hs - 9006/8 is displayed on the device manager and when I tried to flashed it with emergency mode, the result always the same. FAILS
Click to expand...
Click to collapse
Try this:
- Start GNQC with the phone disconnected
- Connect the Phone and see GNQC recognizes the QLoader
- If so, press power button until the phone vibrates
- Wait for the GNQC recognizes again the QLoader and press Download on Emergency Mode
Use this KIKAT ROM: https://docs.google.com/uc?id=0B8H5JoBDpTnJMGE2QTJPR0FWX0E
This worked for me, i had the phone completly died, not even recognized by the PC, waited a day and tried again.
Once the QLoader is recognized your good to go!!
I'm having another problem after that, now theres no GSM/3G signals....
I need a EFS backup with the TWRP recovery.... No one seems to have
RSGI_PT said:
Try this:
- Start GNQC with the phone disconnected
- Connect the Phone and see GNQC recognizes the QLoader
- If so, press power button until the phone vibrates
- Wait for the GNQC recognizes again the QLoader and press Download on Emergency Mode
Use this KIKAT ROM: https://docs.google.com/uc?id=0B8H5JoBDpTnJMGE2QTJPR0FWX0E
This worked for me, i had the phone completly died, not even recognized by the PC, waited a day and tried again.
Once the QLoader is recognized your good to go!!
I'm having another problem after that, now theres no GSM/3G signals....
I need a EFS backup with the TWRP recovery.... No one seems to have
Click to expand...
Click to collapse
my e7 died. you are stuck using flash tools. is not even recognized by most PCs. maybe it drain? I can do? help me
I have the same problem, screen is completely black after trying to instal newer official rom. When I connect it to PC, it detects "hid device". I tried power + volume buttons combinations, but nothing changes. Sometimes notification led turn red for a few seconds but nothing else. And once win xp randomly detected phone as that "q..." thing, but it doesn't anymore. What else can I do?
Can anyone help me? I tried everything and my phone is still hardbricked.
Hello guys
Today i received my E7 and i tried to update via the tool unfortunately something went wrong and now i cant open it nor fastboot or recovery. Some hours ago i tried to connect via usb and appeared on the GNQC but later it showed as unknow device. It was my first day with the phone. Right when i connect /disconnect the usb i can hear the sound but i cant do anything. Is it dead or i can revive it somehow?
It was the first day:crying::crying:
Reinstall the drivesbob the PC, press 30 secs on the power button than connect the phone to the PC. If appears a QLoader port use emergency download on gnqc 1.6.9.0
RSGI said:
Reinstall the drivesbob the PC, press 30 secs on the power button than connect the phone to the PC. If appears a QLoader port use emergency download on gnqc 1.6.9.0
Click to expand...
Click to collapse
PLZ HELP i try to update using this http://www.needrom.com/download/gionee-elife-e7-32g/comment-page-2/#comment-165291 but now my phone doest enen boot or fast boot or anything.. in the proces it said "firehose ping phone fail" and stopped updating since then my phone isnt booting or anything and my pc dont recognize it any more.. plz help
---------- Post added at 15:32 ---------- Previous post was at 15:29 ----------
RSGI_PT said:
The phone starts? In a black screen?
If the PC detects it like that the phone has some energy and connection...
Does anything apears on the screen? Can you go to the Recovery Mod?
Have you tried to force the driver installation on that USB item that appears on device manager?
Do you have access via ADB or fastboot?
Did you nottest in what partition did the error message appeared?
Please provide some answers to these questions so i can try to help you...
Click to expand...
Click to collapse
plz help...
PLZ HELP i try to update using this http://www.needrom.com/download/gion...comment-165291 but now my phone doest enen boot or fast boot or anything.. in the proces it said "firehose ping phone fail" and stopped updating since then my phone isnt booting or anything and my pc dont recognize it any more.. plz help
thianpa he thil hi i solve thei toh m