Like topic says. Was doin' it via LG PC Suite. Now it's only LG logo on my phone. Any ideas what should I do?
Are you planning to install custom ROMs on your phone?
If so, check this out:
http://forum.xda-developers.com/showpost.php?p=16783348&postcount=1
Instead of doing this:
Prepare the phone by enabling USB Debugging by going to Settings>Applications>Development>Enable USB Debugging and connect the phone to the computer via USB cable and let Windows install any drivers it needs.
Click to expand...
Click to collapse
Do this instead:
Hold down volume down and plug in the USB cable and 'download mode' should come up on the screen. Let windows install any drivers it needs. Then launch software update.
Click to expand...
Click to collapse
Hope it fixes your problem and device
Same thing happened to me, bricked my device, took it to phone shop they flashed the board and it worked again, think i could have just entered download mode and reinstalled but, i was a noob then still am tbh
Just put your phone into download mode.
Flash fastboot.
Then reflash your ROM!!
ALL DONE XD
Any
You can flash any ROM you want via fastboot and any failed attempts won't completely brick your phone.
Related
Hey guys im trying to back to a fresh stock rom. (VS980)I downloaded all the necessary files, drivers, lgflash tools etc etc. however my computer still cannot recognize my phone. under ports there is not an ANDROID port for my phone. (since we need to change it to COM41)
any ideas or suggestions?
daimonmustdie said:
Hey guys im trying to back to a fresh stock rom. (VS980)I downloaded all the necessary files, drivers, lgflash tools etc etc. however my computer still cannot recognize my phone. under ports there is not an ANDROID port for my phone. (since we need to change it to COM41)
any ideas or suggestions?
Click to expand...
Click to collapse
what comp/ operating system are you on?
plug directly into the computer, not a hub.
Gabriel51 said:
what comp/ operating system are you on?
plug directly into the computer, not a hub.
Click to expand...
Click to collapse
its a pc, wins7 64 bit
daimonmustdie said:
its a pc, wins7 64 bit
Click to expand...
Click to collapse
Do you find it in the device manager?
Gabriel51 said:
Do you find it in the device manager?
Click to expand...
Click to collapse
it shows up when its showing the LG logo, but when its on download mode, its blank.
daimonmustdie said:
it shows up when its showing the LG logo, but when its on download mode, its blank.
Click to expand...
Click to collapse
When it's in the download mode it may show up in a different location in the device manager and be listed only as "android".
Do you hear any sound from the computer when you plug it in when in download mode?
What does your download screen look like?
Once these questions are answered, there may be a solution. Hopefully a CDMA device won't be different
Gabriel51 said:
When it's in the download mode it may show up in a different location in the device manager and be listed only as "android".
Do you hear any sound from the computer when you plug it in when in download mode?
What does your download screen look like?
Once these questions are answered, there may be a solution. Hopefully a CDMA device won't be different
Click to expand...
Click to collapse
Hi i just got my phone back from a cell phone repair shop, they had no luck either.
to answers your questions:
i hear no sound from the computer when i plug it in to turn on download mode.
my download screen says Firmware Update on top, "do not unplug the USB connecton...." 0%. in the bottom it says b17 and ROOTED in red.
daimonmustdie said:
Hi i just got my phone back from a cell phone repair shop, they had no luck either.
to answers your questions:
i hear no sound from the computer when i plug it in to turn on download mode.
my download screen says Firmware Update on top, "do not unplug the USB connecton...." 0%. in the bottom it says b17 and ROOTED in red.
Click to expand...
Click to collapse
there are two possibilities.. First, your phone is already hard bricked.. second is, your battery is absolutely dead with no power left...
Well, Have you tried to check the battery itself?
Rei Zazie said:
there are two possibilities.. First, your phone is already hard bricked.. second is, your battery is absolutely dead with no power left...
Well, Have you tried to check the battery itself?
Click to expand...
Click to collapse
hmmmm hardbricked? i can get into download mode and stock recovery. I messed around with adb sideload last night trying to flash a custom recovery but it kept saying installation aborted on the phone. i even tried adb push but it keeps saying error:closed in the cmd prompt.
how can i check the battery? its non removeable.
thanks for helping, any ideas is appreciated!
daimonmustdie said:
hmmmm hardbricked? i can get into download mode and stock recovery. I messed around with adb sideload last night trying to flash a custom recovery but it kept saying installation aborted on the phone. i even tried adb push but it keeps saying error:closed in the cmd prompt.
how can i check the battery? its non removeable.
thanks for helping, any ideas is appreciated!
Click to expand...
Click to collapse
ok, so have you tried it using different PC or laptop?
(last option if nothing else to try) if you want to check the battery :
DIY remove the case ( there are several tutorials in youtube, but of course, do it with your own risk)
daimonmustdie said:
Hi i just got my phone back from a cell phone repair shop, they had no luck either.
to answers your questions:
i hear no sound from the computer when i plug it in to turn on download mode.
my download screen says Firmware Update on top, "do not unplug the USB connecton...." 0%. in the bottom it says b17 and ROOTED in red.
Click to expand...
Click to collapse
It's not hard bricked/
Getting into download mode proves this.
You must get your computer to recognize your device in order to communicate with it. So I would not consider anything else until that is accomplished. PERIOD!
1. Are you using a USB 2.0 port? usb 3.0 will not work a lot of the time. (Important)
2. Have you tried another usb cable?
3. I think we discussed the drivers, I have them if needed
What operating system are you using?
If nothing here helps we can we can use "TeamViewer 9" which will give me control of your computer to help resolve this issue...
Gabriel51 said:
It's not hard bricked/
Getting into download mode proves this.
You must get your computer to recognize your device in order to communicate with it. So I would not consider anything else until that is accomplished. PERIOD!
1. Are you using a USB 2.0 port? usb 3.0 will not work a lot of the time. (Important)
2. Have you tried another usb cable?
3. I think we discussed the drivers, I have them if needed
What operating system are you using?
If nothing here helps we can we can use "TeamViewer 9" which will give me control of your computer to help resolve this issue...
Click to expand...
Click to collapse
when i turn on my phone, and the LG logo is on the screen, my computer recognizes the phone, it will say LGE androidnet...but when i go to download mode the computer will not recognize. its weird
1. 2.0 ports
2. ive been trying the original LG cable and a motorola cable. no success
3. as for drivers. installed as of now are the LG verizon united driver 2.14.1 and LG united mobile driver 3.12.3.0
4. win 7 64 bit
daimonmustdie said:
when i turn on my phone, and the LG logo is on the screen, my computer recognizes the phone, it will say LGE androidnet...but when i go to download mode the computer will not recognize. its weird
1. 2.0 ports
2. ive been trying the original LG cable and a motorola cable. no success
3. as for drivers. installed as of now are the LG verizon united driver 2.14.1 and LG united mobile driver 3.12.3.0
4. win 7 64 bit
Click to expand...
Click to collapse
That is weird
will it go into recovery?
Gabriel51 said:
That is weird
will it go into recovery?
Click to expand...
Click to collapse
stock recovery.
daimonmustdie said:
stock recovery.
Click to expand...
Click to collapse
Will it boot into recovery?
Gabriel51 said:
Will it boot into recovery?
Click to expand...
Click to collapse
yes it will
daimonmustdie said:
yes it will
Click to expand...
Click to collapse
can you do a factory reset from there? I sold my g2 so i can't check for myself
Gabriel51 said:
can you do a factory reset from there? I sold my g2 so i can't check for myself
Click to expand...
Click to collapse
yes i can
daimonmustdie said:
yes i can
Click to expand...
Click to collapse
what happens when you do a factory reset?
Gabriel51 said:
what happens when you do a factory reset?
Click to expand...
Click to collapse
nothing, it reboots and the LG logo appears and thats it..no O.S.
I've flashed my i9505 many times. I can't remember exactly what I've done, but now the situation is very weird.
1. I can go into Download mode. But Odin doesn't recognise it. Kies doesn't recognise it either. The error message on the bottom right corner of the screen says "USB device not recognized. Your usb device has malfunctioned." I've tried re-install the USB driver, use the original USB cable, even tried it on another PC with no luck. I suspect the very low level USB driver in the phone has corrupted because possibly I flash something wrong in the past.
2. I can go into Recovery mode and flash new ROMs in zip format from there.
3. I can use my phone normally, e.g. make phone call, SMS, WiFi......My computer can recognize my phone as usual when I am in Android.
Any thoughts? Helps are appreciated.
Hello,
Uninstall any previous installed of Samsung USB drivers, clean your Windows registry through CCleaner (not needed but highly suggested) then download and install latest Samsung USB drivers
Now download mode will be recognized on PC
Inviato dal mio GT-I9505
There is an easier way. If you are using windows, go into control panel-> Devices-> Right Click on your phone-> there should be a Driver Details-> Go details I think it is-> Uninstall driver-> Have the box ticked-> Uninstall-> Unplug then replug the cable in and it should work.
Sent from my Nexus 4 using XDA Free mobile app
AntaresOne said:
Hello,
Uninstall any previous installed of Samsung USB drivers, clean your Windows registry through CCleaner (not needed but highly suggested) then download and install latest Samsung USB drivers
Now download mode will be recognized on PC
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
I've tried to re-install the driver. I even tried to connect the phone to another PC where the driver had never been installed before. Nope.... it doesn't work. Actually, I've searched around in Google for long time. The most likely reason is the usb piece of Android code is corrupted. Well, maybe not android, it should be the lower layer of Linux. I previously installed dual boot system follow this link and I screw it up when I tried to upgrade the primary OS:
http://forum.xda-developers.com/showthread.php?t=2447534
procket said:
I've tried to re-install the driver. I even tried to connect the phone to another PC where the driver had never been installed before. Nope.... it doesn't work. Actually, I've searched around in Google for long time. The most likely reason is the usb piece of Android code is corrupted. Well, maybe not android, it should be the lower layer of Linux. I previously installed dual boot system follow this link and I screw it up when I tried to upgrade the primary OS:
http://forum.xda-developers.com/showthread.php?t=2447534
Click to expand...
Click to collapse
You said that in Android USB connection works.
The download mode depends on bootloader, that can't be touched in any way by Android, even you can't touch the bootloader.
It's also write-protected, you can only upgrade it through Odin or through an official OTA update, when flashed you can't downgrade and can't write on its partition if not through JTAG
Inviato dal mio GT-I9505
procket said:
I've flashed my i9505 many times. I can't remember exactly what I've done, but now the situation is very weird.
1. I can go into Download mode. But Odin doesn't recognise it. Kies doesn't recognise it either. The error message on the bottom right corner of the screen says "USB device not recognized. Your usb device has malfunctioned." I've tried re-install the USB driver, use the original USB cable, even tried it on another PC with no luck. I suspect the very low level USB driver in the phone has corrupted because possibly I flash something wrong in the past.
2. I can go into Recovery mode and flash new ROMs in zip format from there.
3. I can use my phone normally, e.g. make phone call, SMS, WiFi......My computer can recognize my phone as usual when I am in Android.
Any thoughts? Helps are appreciated.
Click to expand...
Click to collapse
Hi friend, did you found out how to fix this issue i have the same problem with a I9500 please help
banziitox24 said:
Hi friend, did you found out how to fix this issue i have the same problem with a I9500 please help
Click to expand...
Click to collapse
Sorry mate, I am still stuck in Odin. Since I can flash new ROM via recovery mode and everything else still works, I give up.
procket said:
Sorry mate, I am still stuck in Odin. Since I can flash new ROM via recovery mode and everything else still works, I give up.
Click to expand...
Click to collapse
Dang I have this phone here I can connect it in Odin but in normal mode it doesn't connect and I need it to connect so I can finish the IMEI Repair
change the modes of usb
try *#0808# mtp + adb or others
try *#9090# try all of them
best of luck
Okay so here goes. I've looked at the forums searching far and wide for anything that may help.
The problem is I have an S4 that had some battery problems. (swollen) so i replaced it out for a new one. The shop that I bought it from claimed that it was an original replacement battery (I live in Pakistan so finding an original battery was hard for me). So the phone worked fine for about half a month and now it's acting weird.
1. It seems to be stuck on a boot loop. but sometimes will start and run for a few minutes (random amount of time) and then go back into the reboot phase.
2. the phone does not go into recovery mode. The recovery screen pops up for a second followed by a no command screen and then phone goes back to boot loop.
3. the phone doesnt go into safe mode either. So i cant check if its a app related problem.
I tried to then flash a new recovery or the stock rom. The phone doesn't connect to odin/ nor Dr.fone for android.
-> Windows doesn't install the MTP drivers even though i have the latest version of KIES installed.
-> I have checked with a replacement battery the problem still persists.
Please HELP!!
Boot it into download mode, then try connecting it to a PC.
@GDReaper
The phone goes into download mode but the computer doesn't recognize it. It doesn't connect to odin and it says mtp drivers aren't installed..
T3R3NC3 said:
@GDReaper
The phone goes into download mode but the computer doesn't recognize it. It doesn't connect to odin and it says mtp drivers aren't installed..
Click to expand...
Click to collapse
Did you install the Samsung drivers? Windows won't do it by itself.
GDReaper said:
Did you install the Samsung drivers? Windows won't do it by itself.
Click to expand...
Click to collapse
yes I have samsung Kies installed, I also tried to install the drivers separately.
T3R3NC3 said:
yes I have samsung Kies installed, I also tried to install the drivers separately.
Click to expand...
Click to collapse
Then try a different USB cable.
Try a different USB port, different computer, and different OS.
Seems I've hit the jackpot, my phone's a potato. I had just installed king of nougat v9 and it worked fine until I rebooted into recovery by holding the power button and selecting recovery. At first it was in a boot loop and wouldn't open recovery or get recognized by odin, I read somewhere here to disconnect the battery so I opened the back cover and disconnected it which apparently ****ed the phone a step further now it's dead unless it's connected to a power source and after disconnecting it stays on samsung logo/download mode for a bit then dies.
On my old rom it was working fine except for the fact that I couldn't connect the phone to pc as storage, and it couldn't recognize usb devices I plugged in using the adapter. I took the phone to a repair shop and they said they replaced the micro usb assembly and it still didn't show up on odin, then a few days later they said it's a problem with the power IC and they replaced that then the guy said it worked once on odin then stopped again.
Idk what to do lol, phone's bricked or should I try a different repair shop incase these were idiots.
note: it says device descriptor request failed when connected to pc
Have you tried to reboot to the bootloader by holding down the power button, home button and volume down when your phone is at the android logo?
TheSproker said:
Have you tried to reboot to the bootloader by holding down the power button, home button and volume down when your phone is at the android logo?
Click to expand...
Click to collapse
yeah it gets into download mode but it doesn't show up on odin
HNDRXX said:
yeah it gets into download mode but it doesn't show up on odin
Click to expand...
Click to collapse
Then it means you must install Samsung drivers, so that the computer would recognize your phone. Try downloading smart switch or kies and that should also install the drivers.
or try different ver. of odin
TheSproker said:
Then it means you must install Samsung drivers, so that the computer would recognize your phone. Try downloading smart switch or kies and that should also install the drivers.
Click to expand...
Click to collapse
yaro666 said:
or try different ver. of odin
Click to expand...
Click to collapse
tried both of the above
Try clean install Samsung Drivers and other version of Odin. It should be (have to be) show in Odin after all of these.
hacklesss said:
Try clean install Samsung Drivers and other version of Odin. It should be (have to be) show in Odin after all of these.
Click to expand...
Click to collapse
no luck there's definitely a hardware issue.
HNDRXX said:
no luck there's definitely a hardware issue.
Click to expand...
Click to collapse
Is pc respond when you plug usb cable ? (In download mode)
hacklesss said:
Is pc respond when you plug usb cable ? (In download mode)
Click to expand...
Click to collapse
it says device descriptor request failed when connected to pc
"device descriptor request failed when connected to pc" sounds like a windows problem not android. You can check in the "computer management" device manager to see if the phone is recognized. I am going to assume not.
Try this link for possible solutions. https://www.drivereasy.com/knowledg...ice-descriptor-request-failed-for-windows-10/
surfer3000 said:
"device descriptor request failed when connected to pc" sounds like a windows problem not android. You can check in the "computer management" device manager to see if the phone is recognized. I am going to assume not.
Try this link for possible solutions. https://www.drivereasy.com/knowledg...ice-descriptor-request-failed-for-windows-10/
Click to expand...
Click to collapse
I agree with that %100 percent ?
HNDRXX said:
no luck there's definitely a hardware issue.
Click to expand...
Click to collapse
Hey, do you figured it out what problem it is? I've the same problem and tried all of the PC/Windows tips and tricks.
Hi everyone.
My OnePlus 6T (A6010 version) froze today and it has been rebooting in loop since that. I tried a factory reset, nothing changed, always freezes on the loading "dots" logo then auto-reboot.
I'm on stock firmware and didn't root the phone. Everything is as it came from the box.
What can i do except send it back to the vendor ?
Flash it back to the stone age with this:
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
Frankenscript said:
Flash it back to the stone age with this:
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
Click to expand...
Click to collapse
thx
the phone is not recognized by the computer as a COM port with the qualcomm drivers :/
OnePlus Support took control of my computer to update themselves the ROM but as the phone can't get recognized they are not able to do anything.
fremik said:
thx
the phone is not recognized by the computer as a COM port with the qualcomm drivers :/
OnePlus Support took control of my computer to update themselves the ROM but as the phone can't get recognized they are not able to do anything.
Click to expand...
Click to collapse
Enable usb debugging and download the correct Qualcomm drivers for your Windows pc
Blackblock92 said:
Enable usb debugging and download the correct Qualcomm drivers for your Windows pc
Click to expand...
Click to collapse
i cant start the phone except fastboot or recovery. How do i enable usb debugging there ?
PS: if my plug my old oneplus3T it appears with qualcomm COM port drivers.
Go to fastboot.
Try to flash a FASTBBOT rom, by mauronofrio.