Database Users

[Q] Bricked phone?

Hi, I was flashing my LG when the flashing tool stopped at 63% and showed some error, i tried to flash again but it gave me error 502.
I turned off the phone and tried to turn it on again, the screen wont turn up but the PC detects the LG (zune doesn't).
I've tried to put it on emergency download mode with vol- + camera + power but the tool stills says error 502.
Is it recoverable or is it lost?
Update: I was able to recover it! I tried to enter emergency download mode with the battery out but connected to the pc, then i inserted the battery and the LG flashing tool recognized it!
Took 5 minutes to flash it. (I used the vol- + camera + power to enter emergency download mode).

Good to know and happy for you resolving your issue

bricked
@Cafetal
Can you tell me the cable used for flasing
cable no
1) BJAY0023711 cable with on/off switch
2) SGDY0014302 plain usb user cable
3) RAD32167835 cable with switch for 56k & 910k
As i am having a bricked LGE900 in hand ,your reply will be usefull
Thanks in advance
Problem solved by using plain old USB Cable and LGDP2
kayanvv

[Q] Help - Download mode freez

Hi, I want to flash a KDZ file but the when I get to Download mode its stuck on 0%
I installed all the drivers and even PC suit but nothing works
the phone is LG G2 D802 with stock 4.2.2 , root + twrp 2.7.1 , everything work fine except download mode
thanks

If I remember well you must disconnect and reconnect usb with power and vol down pressed to start flashing

siggey said:
If I remember well you must disconnect and reconnect usb with power and vol down pressed to start flashing
Click to expand...
Click to collapse
Reinstalled drivers (again...) thanks

are you change the port in device manage on your pc? change it to 41 port

[Q] Lots of unusual problems

Hi guys! I am having problems with my phone. I am now running on cm 10 and the problems are: boot image crashed, cant boot into cwm recovery, always boot loop, cant get into download mode, and cant detect sim card. Any solutions?? Thanks

Shao Merng said:
Hi guys! I am having problems with my phone. I am now running on cm 10 and the problems are: boot image crashed, cant boot into cwm recovery, always boot loop, cant get into download mode, and cant detect sim card. Any solutions?? Thanks
Click to expand...
Click to collapse
Can you get it into battery charging mode ?
If you can get there, KDZ software will switch it to Download Mode when you attempt to flash firmware.

I am not sure as my boot animation is damaged no matter what mode I boot into. The problems began when I flashed a v20 baseband
Sent from my LG-E610 using XDA Free mobile app

radio image which is initialized before kernel is damaged
it doesnt interefere with bl or download mode however

- unplug usb cable.
- remove battery.
- hold vol - pressed.
- while doing so, connect usb cable.
- does it get into download mode ?
or try
- unplug usb cable.
- remove battery.
- hold vol - and + pressed.
- while doing so connect usb cable.
- does it get into download mode ?
let me know if either of those does anything.
If any of those work and kdz flash doesn't fix there's still hope, let me know how it goes, you might need a modified firmware dll aswell.
Good luck

freeusername said:
- unplug usb cable.
- remove battery.
- hold vol - pressed.
- while doing so, connect usb cable.
- does it get into download mode ?
or try
- unplug usb cable.
- remove battery.
- hold vol - and + pressed.
- while doing so connect usb cable.
- does it get into download mode ?
let me know if either of those does anything.
If any of those work and kdz flash doesn't fix there's still hope, let me know how it goes, you might need a modified firmware dll aswell.
Good luck
Click to expand...
Click to collapse
nope...tried both. doesnt work...

Problem with LG Spirit: Secure booting error

Hi,
A friend of mine gave me his LG Spirit H440 with the boot error: Secure booting error
In his words he tried to update the software, the phone started to lag and after a reboot the error occurred.
The guy is simple user so installing custom recovery or rooting are out of the question.
Here is a video I made of the problem:
https://www.youtube.com/watch?v=fONioh6uNms
After removing the battery the phone starts for 2-3 seconds with Secure booting error and then powers off. After that it cannot start again until the battery is removed and then everything repeats.
I tried to connect it to the PC with Windows 8.1 and installed LG drivers, but nothing happens. It's not recognized.
Also tried to enter download mode with Vol Up and connecting the USB cable, but again it just displays the error and shuts down.
Is this soft or hard brick? I'll be grateful for any help and guidance.

Try to set it in "upload mode" and flash stock rom kdz
Sent from my LG-H440n using XDA-Developers mobile app

septix said:
Try to set it in "upload mode" and flash stock rom kdz
Sent from my LG-H440n using XDA-Developers mobile app
Click to expand...
Click to collapse
hey
how do i enter "upload mode"???
i have the same issue. please help.
dydbg said:
Hi,
A friend of mine gave me his LG Spirit H440 with the boot error: Secure booting error
In his words he tried to update the software, the phone started to lag and after a reboot the error occurred.
The guy is simple user so installing custom recovery or rooting are out of the question.
Here is a video I made of the problem:
https://www.youtube.com/watch?v=fONioh6uNms
After removing the battery the phone starts for 2-3 seconds with Secure booting error and then powers off. After that it cannot start again until the battery is removed and then everything repeats.
I tried to connect it to the PC with Windows 8.1 and installed LG drivers, but nothing happens. It's not recognized.
Also tried to enter download mode with Vol Up and connecting the USB cable, but again it just displays the error and shuts down.
Is this soft or hard brick? I'll be grateful for any help and guidance.
Click to expand...
Click to collapse
how did you solve this crappy error??

No I didn't manage to find a solution and no one was able to help me.
I returned it to my friend and he bought a new phone.
Sorry.

1. Power down the phone.
2. Connect USB cable to computer.
3. Hold Volume DOWN and insert the USB cable.
4. ??
5. Profit.

septix said:
1. Power down the phone.
2. Connect USB cable to computer.
3. Hold Volume DOWN and insert the USB cable.
4. ??
5. Profit.
Click to expand...
Click to collapse
im sorry for ignorance but FastBoot=Upload mode?

Same problem, is there a BOARD DIAG option for this phone?

Bricked Oneplus 2 not getting detected on pc

Can anyone tell me a way so that the pc detects my bricked OPT? I have tried all combinations but its not getting detected at all

phorcus said:
Can anyone tell me a way so that the pc detects my bricked OPT? I have tried all combinations but its not getting detected at all
Click to expand...
Click to collapse
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/

Rebel7022 said:
https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Click to expand...
Click to collapse
finally it got detected but when i run MSM8994DownloadTool.exe as administrator and click on start nothing happens

https://1.bp.blogspot.com/-ZZ-sHUBv...ExaIdiLCYRNQCLcB/s1600/Screenshot+%284%29.png
this is where i am stuck please help guys i am in a fix :'(

Are you sure you disabled driver signature enforcing in Windows? You can't install the qualcomm 9008 serial interface driver without doing this, as this driver is not signed by Microsoft.

pitrus- said:
Are you sure you disabled driver signature enforcing in Windows? You can't install the qualcomm 9008 serial interface driver without doing this, as this driver is not signed by Microsoft.
Click to expand...
Click to collapse
yes i did still it doesn't work, any help would be appreciated

If you power up your phone using volume up in fastboot/bootloader mode and then run fastboot devices, does it list your phone? Just making sure the cable connection works.
If yes, then power down your phone by holding power button until screen goes black (making sure you disconnected usb cable first). Then hold volume up while connecting usb cable (don't touch power button), you should hear Windows detecting a new device, check device manager to see that the qualcomm 9008 usb serial port has been successfully installed and with no warning exclamation mark on it. If all is good, you should now be able the launch the download tool and push the download button to start downloading the file partitions to the phone.

pitrus- said:
If you power up your phone using volume up in fastboot/bootloader mode and then run fastboot devices, does it list your phone? Just making sure the cable connection works.
If yes, then power down your phone by holding power button until screen goes black (making sure you disconnected usb cable first). Then hold volume up while connecting usb cable (don't touch power button), you should hear Windows detecting a new device, check device manager to see that the qualcomm 9008 usb serial port has been successfully installed and with no warning exclamation mark on it. If all is good, you should now be able the launch the download tool and push the download button to start downloading the file partitions to the phone.
Click to expand...
Click to collapse
Thanks a lot for writing out to me, but the thing is that my phone is already dead and i had given up all the hope that i had but luckily it got detected and i cannot boot into fastboot mode or bootloader mode the screen is already black, do you think i still have hope? the phone has been detected as qualcomm 9008 in ports in device manager

phorcus said:
Thanks a lot for writing out to me, but the thing is that my phone is already dead and i had given up all the hope that i had but luckily it got detected and i cannot boot into fastboot mode or bootloader mode the screen is already black, do you think i still have hope? the phone has been detected as qualcomm 9008 in ports in device manager
Click to expand...
Click to collapse
Could it be that the actual screen is dead on your phone? But still, since the PC detects the debug port, it should start restoring the phones partitions when you start downloader tool and press the download button up to the left.