Database Users

Samsung Galaxy Y Wont turn on problem help asap

Samsung Galaxy Y, Idk what problem I have but im really confused now withh all the non sense. Idk if its looping or not cus sometimes it boots. then after a few minutes turns off again. I can go to Volume up+ home button + lock button then i tried the system recovery. it worked but then it booted up then after a few minutes same problem. Now it turns on and off and whatever. I tried the odin stuff. I downloaded usb drives then odin and the md5 thing. I tried first. it didnt show ready on the odin while i was on download. then next it showed a blue thing so i thought it was ready. I clicked the PDA with md5 in it. then clicked start. but it said FAILED. now idk what to do.
what else can I do and can someone pleaseee explain it step by step. thank you

Download the firmware files for your country from dokys thread at the top of of dev section
If you have kies installed stop it from running or Uninstall it
Install Samsung drivers http://forum.xda-developers.com/showthread.php?p=11498043
connect phone to pc
put phone in download mode (vol down home & power button)
right click on the odin icon and run as administrator
place csc file in csc
Modem in phone
Pda in pda
start flashing process
Do not repartition or use pit file

marcussmith2626 said:
Download the firmware files for your country from dokys thread at the top of of dev section
If you have kies installed stop it from running or Uninstall it
Install Samsung drivers http://forum.xda-developers.com/showthread.php?p=11498043
connect phone to pc
put phone in download mode (vol down home & power button)
right click on the odin icon and run as administrator
place csc file in csc
Modem in phone
Pda in pda
start flashing process
Do not repartition or use pit file
Click to expand...
Click to collapse
what is csc file and modem. I only have pda file named recovery.tar.md5

MeetJunx said:
what is csc file and modem. I only have pda file named recovery.tar.md5
Click to expand...
Click to collapse
Goto dokys thread in dev section!!! (sticky at top for odin firmware)
Download the firmware for your country
unzip the file & you will find modem pda & csc
Please just follow what I say - read dokys thread and you will have all your answers

his rponele
marcussmith2626 said:
Goto dokys thread in dev section!!! (sticky at top for odin firmware)
Download the firmware for your country
unzip the file & you will find modem pda & csc
Please just follow what I say - read dokys thread and you will have all your answers
Click to expand...
Click to collapse
Okay thank you I think this is what I need. but i'll do this tomorrow. But one more question. What will I download here? theres like 5? im from the Philippines. Thank you

MeetJunx said:
Okay thank you I think this is what I need. but i'll do this tomorrow. But one more question. What will I download here? theres like 5? im from the Philippines. Thank you
Click to expand...
Click to collapse
Iv no idea which is latest one for you
as a guide the first two letters represent region - xx = European then the further down alphabet next letter is the newer it is

marcussmith2626 said:
Iv no idea which is latest one for you
as a guide the first two letters represent region - xx = European then the further down alphabet next letter is the newer it is
Click to expand...
Click to collapse
so I followed everything. I have the csc modem and pda. But when it almost finishes like the green thing is almost done. The Cellphone turns off. resulting to failure. What do I do next?

already tried to flash it back/again on stock rom ? maybe it will help
im from philipines too

MeetJunx said:
so I followed everything. I have the csc modem and pda. But when it almost finishes like the green thing is almost done. The Cellphone turns off. resulting to failure. What do I do next?
Click to expand...
Click to collapse
It will turn off normally - leave it don't interrupt it or try another firmware

akosicarlo said:
already tried to flash it back/again on stock rom ? maybe it will help
im from philipines too
Click to expand...
Click to collapse
hey, Idk what flash or stock rom is. but im googling it right now. and im looking at a video. will this solve my problem with it turning off?

yeah ....
flash stock rom thru odin
note: after the process had been complete it will AUTO REBOOT (dont do anything on the phone) unless it already boot up

Problem after firmware flash

Hey there people from XDA Forums,
I kind of figure I messed my S4 (I9505) up. I tried to flash a DBT-firmware (branding free for Germany) on a phone I got from Switzerland including a netlock. After Odin started I got a write error and now the phone tells me there was an issue please ask Kies about recovery mode. But Kies doesn't recognice my Phone at all. Is there any chance i can get a new working firmware onto it?
greetings

SirHanni said:
Hey there people from XDA Forums,
I kind of figure I messed my S4 (I9505) up. I tried to flash a DBT-firmware (branding free for Germany) on a phone I got from Switzerland including a netlock. After Odin started I got a write error and now the phone tells me there was an issue please ask Kies about recovery mode. But Kies doesn't recognice my Phone at all. Is there any chance i can get a new working firmware onto it?
greetings
Click to expand...
Click to collapse
Hi mate
This is an extract from this thread
http://forum.xda-developers.com/showthread.php?t=2265477
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Flashing firmware from other country should not be a problem , download file again

Where do I find a correct pit file? When flashing PIT is it always nessecary to check repartition in odin?

SirHanni said:
Where do I find a correct pit file? When flashing PIT is it always nessecary to check repartition in odin?
Click to expand...
Click to collapse
Hi
In your case it would be :
File Type: zip I9505_pit file.zip - [Click for QR Code] (1.2 KB, 43344 views)
Is on the thread i posted before , you only check repartition when you use a PIT file , any other case you do not

finally I managed to flash a new recovery and where able to restart the phone. As it seems the problem was my Computer. through the old notebook from my wife it went quite flawless. Now i am back to my original problems. I am on a branded rom with a sim lock and dont like both of it
will it work to just flash the complete firmware from my region? will it overwrite the netlock or where is it located?
Thanks for your help so far

SirHanni said:
finally I managed to flash a new recovery and where able to restart the phone. As it seems the problem was my Computer. through the old notebook from my wife it went quite flawless. Now i am back to my original problems. I am on a branded rom with a sim lock and dont like both of it
will it work to just flash the complete firmware from my region? will it overwrite the netlock or where is it located?
Thanks for your help so far
Click to expand...
Click to collapse
Hi,
Glad you manage it to work.
Flashing a new firmware will not network unlock you phone , use to be possible to do it using this guide:
http://forum.xda-developers.com/showthread.php?t=2282683
not anymore as far as i know , you will need an unlock code.

yeah, tried this one allready, but after key input I dont get a new menu. I guess this method is not working for newer austrian firmwares

SirHanni said:
yeah, tried this one allready, but after key input I dont get a new menu. I guess this method is not working for newer austrian firmwares
Click to expand...
Click to collapse
No, i think the only way is with a unlock key..........

got myself a key and everything works fine now! thanks a lot for the help and inspiration.

SirHanni said:
got myself a key and everything works fine now! thanks a lot for the help and inspiration.
Click to expand...
Click to collapse
Any time mate..that is why we are here for

Help please

Hello everyone i have a note 3 and it is rooted and has a a kernel flashed on it, now i want to revert back to my stock rom and i know i have to download the software and flash it with odin but i cant find my software anywhere could anyone give me a link to the firmware for my specific device here are its details
build number: N9005XXUDMJ7
CSC:N9005DTUDMJ4
NAME:NOTE 3 N9005
PLEASE HELP ME I WOULD BE REALLY GRATE-FULL TO THE PERSN WHO CAN LEND ME THE LINK I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS BUT I REALLY WANT TO GO BACK TO STOCK PLEASE. THANKYOU

go to sammobile.com and search for your model there

kewlkaka1203 said:
Hello everyone i have a note 3 and it is rooted and has a a kernel flashed on it, now i want to revert back to my stock rom and i know i have to download the software and flash it with odin but i cant find my software anywhere could anyone give me a link to the firmware for my specific device here are its details
build number: N9005XXUDMJ7
CSC:N9005DTUDMJ4
NAME:NOTE 3 N9005
PLEASE HELP ME I WOULD BE REALLY GRATE-FULL TO THE PERSN WHO CAN LEND ME THE LINK I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS BUT I REALLY WANT TO GO BACK TO STOCK PLEASE. THANKYOU
Click to expand...
Click to collapse
Install app called "phone Info" from google store, it will take you to correct firmware as per your country origin.

kewlkaka1203 said:
I TRIED FLASHING A STOCK ROM WITH A SAME BUILD NUMBER BUT DIFFERENT CSC AND IT WAS A FAIL LUCKILY MY DEVICE STILL WORKS
Click to expand...
Click to collapse
That shouldn't have failed, CSC mismatch is not a cause of flash failure. Can you provide more details?

Hm...
Hi guys,
I had an issue similar to this and have no recollection what I did to fix it. I don't even think that I fixed it, ever. Meaning - no stock ROM install for me for months and months now.
I just downloaded some AOSP/TW ROM and flashed. Are you able to get to the custom recovery? Please confirm - I've read somewhere that you can flash stock from custom recovery. I did try a few "PIT" files, with no help.
P.S. I remembered a bit now. I was finally able to flash it through Odin, but entered boot loop. So, no go!
My eyes are on this thread.
Good luck,
Sonny B.

details↓↓↓↓
Bulbous said:
That shouldn't have failed, CSC mismatch is not a cause of flash failure. Can you provide more details?
Click to expand...
Click to collapse
Um sorry for the late reply. So what happens is i down the firmware from sammobile sure that it was for my model and build number but the csc was of switzerland different than mine next i flashed the rom from 3 different versions of odin starting from v.3.10 it started saying checking md5 file and it was taking too long and we had lost hope then suddenly it said md5 read succesfully and then brought up another dialouge saying setup connection and then cam up with a fail message usb debugging and all the process was done correctly i know this is a late reply but please reply back if you are there thanks

if....
sonny_b_bih said:
Hi guys,
I had an issue similar to this and have no recollection what I did to fix it. I don't even think that I fixed it, ever. Meaning - no stock ROM install for me for months and months now.
I just downloaded some AOSP/TW ROM and flashed. Are you able to get to the custom recovery? Please confirm - I've read somewhere that you can flash stock from custom recovery. I did try a few "PIT" files, with no help.
P.S. I remembered a bit now. I was finally able to flash it through Odin, but entered boot loop. So, no go!
My eyes are on this thread.
Good luck,
Sonny B.
Click to expand...
Click to collapse
If it was a pass message on odin it shouldve worked go into recovery mode and do a factory reset from there it should work it happened with me too but remember dont leave the phone switched on as its stuck in boot loop cause when the powers dead ur phone wont charge any more it would keep thinking as if its not bieng charged if thats what u did i recommend making a factory cable search it on google and charge from that so the device knows its bieng charged once the wipe data is done reset and hopefully it would work if not i think u should flash another stock rom again i hope i helped

kewlkaka1203 said:
If it was a pass message on odin it shouldve worked go into recovery mode and do a factory reset from there it should work it happened with me too but remember dont leave the phone switched on as its stuck in boot loop cause when the powers dead ur phone wont charge any more it would keep thinking as if its not bieng charged if thats what u did i recommend making a factory cable search it on google and charge from that so the device knows its bieng charged once the wipe data is done reset and hopefully it would work if not i think u should flash another stock rom again i hope i helped
Click to expand...
Click to collapse
Did you solve ur problem?

........
Joku1981 said:
Did you solve ur problem?
Click to expand...
Click to collapse
NO

Hi guys ,
There're three possibilities about the country origin by comparing the data on sammobile.You can try to flash these three versions firmwares.one of them must be correct! Portugal PDA:N9005XXUDMJ7 CSC:N9005OPTDMJ4 SLOVENIA PDA:N9005XXUDMJ7 CSC:N9005OXXDMJ4 POLAND PDA:N9005XXUDMJ7 CSC:N9005PRTDMJ4.download link is also on sammobile.com!
Good luck!
Sent from my SM-N9005 using XDA Free mobile app

Install Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'. Download the firmware for your device and flash it via Odin.

Fix Phone

hi guys. my friend has galaxy s4 i9500. recently she dropped her phone and brought it to Technician. he repiared it, but home button has problem and also he changed whole system. i tried to install lolipop official firmware with odin but it cant open nor download mode nor recovery. phone is totaly Disordered. i dont know whats with it. someone plz help me. i need just to access download mode and ill install the firmware but problem is i cant access download mode. it cant open any program. ill post screenshots a bit later because im not att home yet. thaanks in advance and sorry for bad english

Try a JIG
Try a jig, costs nearly nothing.
http://www.amazon.com/Generic-Unbri...e=UTF8&qid=1424690434&sr=1-3&keywords=usb+jig

Killnolife said:
Try a jig, costs nearly nothing.
http://www.amazon.com/Generic-Unbri...e=UTF8&qid=1424690434&sr=1-3&keywords=usb+jig
Click to expand...
Click to collapse
Ok thanks but is there any other ways?

here is screenshots. when i try to boot to recovery or download mode appears android man with red sign (last image) and when i try to open any app even file manager screen becomes dark (8th image) and i have to remove battery. any ideas?

If your phone doesn't have knox then it's very precious!
Try the JIG (no other way) then flash a non-knox 4.2.2 / MGA 4.2.2 firmware :angel:

Killnolife said:
If your phone doesn't have knox then it's very precious!
Try the JIG (no other way) then flash a non-knox 4.2.2 / MGA 4.2.2 firmware :angel:
Click to expand...
Click to collapse
it doesnt has knox. i even dont know hat kind of touchwiz it this. lags every time and doesnt work properly =D ok thanks ill try it

I Need Help Please! PLEASE HELP!

Hello Everyone, i got a note 3 phone
SM-N9005 FCC ID: A3LSMN9005
SSN:- N9005GSMH
MADE IN VIETNAM BY SAMSUNG..
i bought this note 3 phone from UAE and it was with Kitkat 4.4.2 and when i was using it, some apps used to stop and not responding and get a pop-up message "System has stopped" or something like .com.system has stopped responding, also when i open some other apps the phone shuts down, so i turn it on, sometimes it works fine and sometimes it stops responding and shut down many times, so i had to make a full restore factory reset and still have the same problem, some guys told me you have problems with the rom, so i had to look for stock roms to it and found a lollipop rom under this name (AP_N9005XXUGBNL8_CL3643614_QB3415922_REV00_user_low_ship_MULTI_CERT.tar) and i installed samsung usb drivers just to make sure that everything is okay.
so when i started flashing it by odin it said Fail, so i tried once again but failed again, and i found my phone went to that black screen with (firmware upgrade encountered an issue, please select recovery mode in kies & try again), i couldn't get to my previous kitkat rom after that, but i'm able to go to download mode and recovery mode, so after this( brick) i had to search of how to unbrick it so after that i flashed philz as a recovery mode, and then flashed (All samsung recovery.tar) so then after flashing it, that message of (firmware upgrade encountered an issue, please select recovery mode in kies & try again) is gone, but i got another loop of restart each time i open the phone, it is not booting it is only taking me to the black start screen of android, and after a while it restarts itself.. and then when i tried to flash the same rom once again and connected my phone to my computer, drivers started configuring and so i waited to finish, but it failed it said (MTP USB Device Failed), though i still can see the phone connected over Odin in download mode.
so i had to look for another rom which is a kitkat stock version (N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar) which i found after downloading it and flashing it to my phone that it is for n900, which is normally failed flashing!.
so I don't know if i messed things up or not, and i really don't know what else or more to do ?
please give me your advice so i can restore this phone to its original stats.
Thank You!​

Are you sure the first firwmware you flashed is a full stock firmware?. What is the size?.
The second firmware you flashed isn't for n9005. Try different firmware specifially for UAE.
Sent from my SM-G925F using XDA Free mobile app

Rosli59564 said:
Are you sure the first firwmware you flashed is a full stock firmware?. What is the size?.
The second firmware you flashed isn't for n9005. Try different firmware specifially for UAE.
Sent from my SM-G925F using XDA Free mobile app
Click to expand...
Click to collapse
well i found it on a web site also this rom size is (2.304 GB), and it had an additional files with it about more 4 other files to flash with
what do you think?

hlabbad said:
well i found it on a web site also this rom size is (2.304 GB), and it had an additional files with it about more 4 other files to flash with
what do you think?
Click to expand...
Click to collapse
I see. It's a leaked lollipop firmware. Flash again with 4 files except pit. First boot will take some time.

Rosli59564 said:
I see. It's a leaked lollipop firmware. Flash again with 4 files except pit. First boot will take some time.
Click to expand...
Click to collapse
but when i flashed it with big sized file, the flashing process failed, it didn't work!

hlabbad said:
but when i flashed it with big sized file, the flashing process failed, it didn't work!
Click to expand...
Click to collapse
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.

Rosli59564 said:
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.
Click to expand...
Click to collapse
like this shown in the photo

Rosli59564 said:
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.
Click to expand...
Click to collapse
1. Go to Download Mode.
2. Tell me if you can flash this ONE using ODIN. It's the latest for KSA (Country Saudi Arabia).

hlabbad said:
like this shown in the photo
Click to expand...
Click to collapse
Choose corresponding file for BL, AP, CP & CSC. Do not tick repartition. You could also try with the firmware as suggested by joku

hlabbad said:
like this shown in the photo
Click to expand...
Click to collapse
You have repartion ticked but without a pit file, so obviously it will fail.
Sent from my SM-N9005 using Tapatalk

Thanks All for help

Did you solve the problem?