Database Users

Samsung will not touch my brand new S5, rooting gone wrong! HELP NEEDED!

Hi all, I have rooted my galaxys in the past, but I have ran into a problem with this device, I am now only getting ''firmware upgrade encountered an issue please select recovery mode in kies and try again'', I have tried connecting to Kies, but all I get is an error message. I have tried to flash another rom, but I get error messages aswell, and I just stay stuck in the same place .
I have tried to bring my s5 to a local guy who roots and fixes phones, but he could not solve this. Now Samsung will not touch it, as I have voided the warranty.
Please can someone help me, I don't want to loose €400 of a brand new device if someone can help, I will show my appreciation in some way!! Please people, I am so desperate :crying:

Need to ask Qs in the Q&A forum
http://forum.xda-developers.com/galaxy-s5/help
Go to Sammobile .com and download a stock ROM for your model S5
Use ODIN to flash it while the phone is in download mode
Instructions are under the download on sammobiles site

*Detection* said:
Need to ask Qs in the Q&A forum
http://forum.xda-developers.com/galaxy-s5/help
Go to Sammobile .com and download a stock ROM for your model S5
Use ODIN to flash it while the phone is in download mode
Instructions are under the download on sammobiles site
Click to expand...
Click to collapse
thanks for the reply. I tried this and it didnt work, i will upload the error message later, something about not enough storage?

KennethK1992 said:
thanks for the reply. I tried this and it didnt work, i will upload the error message later, something about not enough storage?
Click to expand...
Click to collapse
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Size)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is what i get when i try to flash another rom

Which model S5 is it ?
Choose the correct PIT file for your exact model S5 (Example, mine is the G900F), from here
http://forum.xda-developers.com/showpost.php?p=52329647&postcount=2
Extract it, and add it to the PIT section in ODIN, at the same time as you add the stock ROM to ODIN, and flash them both at the same time

Not sure if this is what you have tried in kies3, but this is what worked for me before when things have gone wrong and i had nothing but a samsung paper weight:
Go into download mode and do a firmware upgrade and initialisation through kies3. You will need your serial number and model number( on the white sticker behind the battery. in kies3 go tools> firmware upgrade and initialisation, then follow the on screen steps. I used this when I soft bricked my note 2 when I had it, I personally find it's the best way to restore a samsung device.
If you have any issues, try checking for kies3 updates to ensure you have the latest drivers, and if you can get into the stock recovery on your phone, you could try doing a factory data reset and cache wipe which also sometimes helps.

KennethK1992 said:
<OSM> Checking MD5 finished Sucessfully..
this is what i get when i try to flash another rom
Click to expand...
Click to collapse
The suggestion of @*Detection* will definitely work if done properly, but before doing that you can try this:
Extract the hidden.img from the firmware that you're trying to install, and rename it as hidden.img.tar, now open Odin, and load that file on AP and flash it. After turning on the phone wait around 5 minutes and it should boot up.

got the phone back from SBE (Samsung's Irish Partner) with a chip on it should i try kies3 before going with odin?

using kies3, the program keeps telling me ''device is not supported'' :crying:

KennethK1992 said:
using kies3, the program keeps telling me ''device is not supported'' :crying:
Click to expand...
Click to collapse
You should use Smart Switch.

Uzair40 said:
You should use Smart Switch.
Click to expand...
Click to collapse
what is smart switch? can I do any of this with a Mac? or should I stick with a windows?

Smart switch is for WiFi.... nothing to do with flashing ROMs
Use ODIN and PIT file as I posted originally

*Detection* said:
Smart switch is for WiFi.... nothing to do with flashing ROMs
Use ODIN and PIT file as I posted originally
Click to expand...
Click to collapse
Yea figured that downloading ROM now, what file extension should the pit file be when I download it? thanks for your help!

KennethK1992 said:
Yea figured that downloading ROM now, what file extension should the pit file be when I download it? thanks for your help!
Click to expand...
Click to collapse
ROM should be .MD5
PIT should be .PIT
Extract the PIT file and the ROM once downloaded to get the correct files

*Detection* said:
ROM should be .MD5
PIT should be .PIT
Extract the PIT file and the ROM once downloaded to get the correct files
Click to expand...
Click to collapse
just waiting for the ROM to finish downloading...
which version of ODIN do you recommend I use? thanks again!

The one in the instructions under the download on sammobiles site, I think it's 3.10.7
But you should be able to use any from 3.09 > 3.10.7
Newest generally recommended unless it fails, then try an older version
When you add a PIT file, ignore the instructions about re-partition, it needs to be ticked for PIT, it will set itself up automatically once you add the ROM and PIT

My samsung s5 brick while rooting and I'm downloading rom from sam mobile hope it will work and if not i will try smart switch method

Moa z Bourhani said:
My samsung s5 brick while rooting and I'm downloading rom from sam mobile hope it will work and if not i will try smart switch method
Click to expand...
Click to collapse
What smart switch method?
Smart switch is a toggle switch in WiFi settings, to tell the phone to switch between Data and WiFi to keep the best signal
Where are people getting this crap from?

*Detection* said:
What smart switch method?
Smart switch is a toggle switch in WiFi settings, to tell the phone to switch between Data and WiFi to keep the best signal
Where are people getting this crap from?
Click to expand...
Click to collapse
it seems to be an updated version of Kies, didn't work for me.

KIES added a setting with an identical name as a setting in Android?.... smart move
KIES is all but useless anyway, ODIN for updates, TWRP for backups
KIES says it has backed up fine, but trying to restore the backup, restores next to nothing

i ve bricked my phone...pls help

hi all
i bricked my phone recently...n910H
i wanted to return my note4 bootlogo by installing BL_PARAM_Joseph- from sixperience thread
and found it contain the wrong bootloader which may be for 910c
pls help iam very disappointed :crying::crying:

Just go on sammobil.com find the firmware for your phone, and follow the instructions with Odin which is provided on the download page

thejunkie said:
Just go on sammobil.com find the firmware for your phone, and follow the instructions with Odin which is provided on the download page
Click to expand...
Click to collapse
i installed via odin:
the massage in odin :
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> modem.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1

i think i had this once, and no matter what i tried, it didnt want to work, but then it was just something stupid, like install odin again, or drivers, or try another usb port.

thejunkie said:
i think i had this once, and no matter what i tried, it didnt want to work, but then it was just something stupid, like install odin again, or drivers, or try another usb port.
Click to expand...
Click to collapse
no nothing wrong here :crying:
i flashed via odin this day in the same manner and there was no problem:crying::crying:

samsung lo said:
no nothing wrong here :crying:
i flashed via odin this day in the same manner and there was no problem:crying::crying:
Click to expand...
Click to collapse
it say on screen Sw rev check fail device 2 binary 1

please help guys pleaase
it dont boot into recovery nor regognized by kies

samsung lo said:
please help guys pleaase
it dont boot into recovery nor regognized by kies
Click to expand...
Click to collapse
I had the same error and fixed it. It often happens due to bootloader and modem, Just download the correct stock firmware for your device, rename it from .md5 to .tar and extract it using 7-Zip, delete or move sboot.bin and modem.bin then make a new 7-Zip archive with .tar extension and install it regulary by Odin

shababik said:
I had the same error and fixed it. It often happens due to bootloader and modem, Just download the correct stock firmware for your device, rename it from .md5 to .tar and extract it using 7-Zip, delete or move sboot.bin and modem.bin then make a new 7-Zip archive with .tar extension and install it regulary by Odin
Click to expand...
Click to collapse
thanks my friend u save me
i will pray for u my friend
love u

samsung lo said:
thanks my friend u save me
i will pray for u my friend
love u
Click to expand...
Click to collapse
you wlcm bro :good:

Need help with odin and firmware

So they other night i tried rooting my gs7 edge. Found a tutorial online and flashed a file via odin. And upon rebooting ended up freezing on the AT&T boot logo. which seemed to a common problem after reading the comments. The only way was to do a factory reset which i did and got the phone working again. But now the phone is extremely sluggish it lags doing the simplest tasks. Now i want to start over and flash the stock firmware via odin but not sure what files to flash ive tried flashing couple different ones and odin has always failed. can some one point me to the right files i am a complete newb with samsung phones.

You could flash the u firmware

Your phones lagging because you have the engine kernel flashed.

brusslesprouts said:
So they other night i tried rooting my gs7 edge. Found a tutorial online and flashed a file via odin. And upon rebooting ended up freezing on the AT&T boot logo. which seemed to a common problem after reading the comments. The only way was to do a factory reset which i did and got the phone working again. But now the phone is extremely sluggish it lags doing the simplest tasks. Now i want to start over and flash the stock firmware via odin but not sure what files to flash ive tried flashing couple different ones and odin has always failed. can some one point me to the right files i am a complete newb with samsung phones.
Click to expand...
Click to collapse
Start over and avoid root ENG BOOT kernel ID garbage. I recommend just going to the U software until a real root method can be found.

im just trying to flash back to the newest update via odin and am stuck at
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..

ShrekOpher said:
Start over and avoid root ENG BOOT kernel ID garbage. I recommend just going to the U software until a real root method can be found.
Click to expand...
Click to collapse
seems to be stuck flashing on odin
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
odin also seems to freeze when loading the ap. ill let it sit for a few minutes and resumes. also got it to fail after restarting the phone and taking the sim card out into another phone.

Did you try rebooting you phone back into download mode
Sent from my SM-G935U using Tapatalk

brusslesprouts said:
seems to be stuck flashing on odin
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
Click to expand...
Click to collapse
Make sure you are using all 4 files (BL, AP, CSC, CS)
Also if you can boot into recovery first factory reset from there it will make the Odin flash cleaner.
If you keep getting an error you might need a different version of Odin. Use the one from U firmware thread it should work.
If it is stuck at setting up connections you may need to reinstall the drivers for your phone.

ShrekOpher said:
Start over and avoid root ENG BOOT kernel ID garbage. I recommend just going to the U software until a real root method can be found.
Click to expand...
Click to collapse
ShrekOpher said:
Make sure you are using all 4 files (BL, AP, CSC, CS)
Also if you can boot into recovery first factory reset from there it will make the Odin flash cleaner.
If you keep getting an error you might need a different version of Odin. Use the one from U firmware thread it should work.
If it is stuck at setting up connections you may need to reinstall the drivers for your phone.
Click to expand...
Click to collapse
i took the the sim card out and am now getting a error
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
ill try doing a factory reset again and trying again. not sure what sha256 is i flashed the files from here http://forum.xda-developers.com/att...a-10-03-16-t3477246/post69309275#post69309275

dogredwing1 said:
Did you try rebooting you phone back into download mode
Sent from my SM-G935U using Tapatalk
Click to expand...
Click to collapse
yes phone is in download mode.

brusslesprouts said:
i took the the sim card out and am now getting a error
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
ill try doing a factory reset again and trying again.
Click to expand...
Click to collapse
The above error I got from one Odin. I used the other Odin and it went through fine. Go to the U firmware thread in this forum and download the other Odin.

Yea need the patched Odin.. also located in the root guide in general forum
Sent from my SM-G935U using Tapatalk
---------- Post added at 08:41 PM ---------- Previous post was at 08:39 PM ----------
Root-Maniac said:
Yea need the patched Odin.. also located in the root guide in general forum
Sent from my SM-G935U using Tapatalk
Click to expand...
Click to collapse
Here's a direct download link for you http://d-h.st/gsDA
Sent from my SM-G935U using Tapatalk

Root-Maniac said:
Yea need the patched Odin.. also located in the root guide in general forum
Sent from my SM-G935U using Tapatalk
---------- Post added at 08:41 PM ---------- Previous post was at 08:39 PM ----------
Here's a direct download link for you http://d-h.st/gsDA
Sent from my SM-G935U using Tapatalk
Click to expand...
Click to collapse
this is the version i have had 3.12. It hangs on loading the ap goes into "not responding" then if i wait it will load and can load all the other files. I will try this version in the link and post results

<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I don't know about that 1. Hopefully someone else can help..
Sent from my SM-G935U using Tapatalk

Root-Maniac said:
I don't know about that 1. Hopefully someone else can help..
Sent from my SM-G935U using Tapatalk
Click to expand...
Click to collapse
not sure what els to do i have insurance on the phone but when the phone boots it says custom. so im afraid to exchange it. i got all my files from here http://forum.xda-developers.com/att...a-10-03-16-t3477246/post69309275#post69309275 except for the odin which was posted above. The phone is stuck in a boot loop as of now.

ShrekOpher said:
The above error I got from one Odin. I used the other Odin and it went through fine. Go to the U firmware thread in this forum and download the other Odin.
Click to expand...
Click to collapse
do you have a link for the U firmware. I went here http://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451 and the link is dead.

brusslesprouts said:
do you have a link for the U firmware. I went here http://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451 and the link is dead.
Click to expand...
Click to collapse
I will provide links to both the Odin and the Firmware.
Odin.
https://mega.nz/#!D4ojEZjC!t77eBmm2Y7IEb-TNbYGqXV8HvCVVNWPDMUe3glxE37k
Firmware Downloaded from Sammobile.
https://mega.nz/#!r8QARZLS!RWjgsYIvAc2KqN0Yiw_TnYPCpmVbYMwpRJw8HlVSUDo

ShrekOpher said:
I will provide links to both the Odin and the Firmware.
Odin.
https://mega.nz/#!D4ojEZjC!t77eBmm2Y7IEb-TNbYGqXV8HvCVVNWPDMUe3glxE37k
Firmware (Still uploading might be an hour or so)Downloaded from Sammobile.
Click to expand...
Click to collapse
i appreciate it thank you

ShrekOpher said:
I will provide links to both the Odin and the Firmware.
Odin.
https://mega.nz/#!D4ojEZjC!t77eBmm2Y7IEb-TNbYGqXV8HvCVVNWPDMUe3glxE37k
Firmware Downloaded from Sammobile.
https://mega.nz/#!r8QARZLS!RWjgsYIvAc2KqN0Yiw_TnYPCpmVbYMwpRJw8HlVSUDo
Click to expand...
Click to collapse
thank you download worked. Going to flash now will report back

Stock ROM with PIT file

Hi all
I just wondered if someone was able to direct me to a stock to flash via Odin. I actually need the PIT file as I am getting an error every time I try to reflash, any guidance would be greatly appreciated. I have looked around but can't seem to find what I need.
Thanks

what phone model?
search on google - SM-N910x (where x is your model) 4 Files Repair Firmware
for example - SM-N910C 4Files Repair Firmware
and flash them responsible accordingly with Odin [the god of samsung flashing ]
good luck

There is some good information on your subject.
https://forum.xda-developers.com/note-4/snapdragon-dev/note-4-debrick-img-t3488114/page84

I've extracted the PIT file for the SM-N910F if needed, (also have PIT files for the SM-T800, SM-T700 and SM-T705). I had to use one for one of the Tablets recently so extracted them all just in case.

Big Elf said:
I've extracted the PIT file for the SM-N910F if needed, (also have PIT files for the SM-T800, SM-T700 and SM-T705). I had to use one for one of the Tablets recently so extracted them all just in case.
Click to expand...
Click to collapse
i know post is old but worth to ask you still got pit file for 910F?

Link to SM-N910F Pit file. Let me know if there's any problem accessing it:

Big Elf said:
Link to SM-N910F Pit file. Let me know if there's any problem accessing it:
SM-N910F Pit file
Click to expand...
Click to collapse
thanks for file unfortunately another fail :/
<ID:0/009> Odin engine v(ID:3.1301)..
<ID:0/009> File analysis..
<ID:0/009> Total Binary size: 0 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

I copied this from another thread on here recently that I can't find for the moment but it's in this section which lists the steps for using the file. Once I find it I'll give credit to the person who listed the procedure:
1. Boot the Galaxy Note 4 into download mode screen then connect to PC.
2. This time load the N910F/C/T/W8.pit Pit file on Odin’s PIT Button (Select pit file of your variant) (SPECIAL INSTRUCTIONS FOR C Variant SEE POST 2)
3. Load your original stock firmware on the Odin’s AP button.
4 Make sure repartiton is automatically checked in options
5. Click on “Start” to flash the stock firmware and PIT file then wait.
After the process is over
Turn off the phone and set it into recovery mode
– Press volume “volume up, home and power buttons”
– Once in recovery mode, perform full wipe
– Select ‘wipe data/factory reset’
Maybe it'll fail if you don't follow these steps. I copied them because I knew I'd forget otherwise.
EDIT: It was from this thread by Ashwin Prabhunerurkar so all credit to Ashwin

Big Elf said:
Link to SM-N910F Pit file. Let me know if there's any problem accessing it:
SM-N910F Pit file
Click to expand...
Click to collapse
This file gave me trouble, better the one found in the first post of the thread you mention here:
Big Elf said:
I copied this from another thread on here [...]
EDIT: It was from this thread by Ashwin Prabhunerurkar so all credit to Ashwin
Click to expand...
Click to collapse

Cant flash stock firmware.

Hi Everyone
Samsung S7 Edge
Hope someone can help me.
I try flash the stock firmware on odin, but then it says there no pit partition, I download the pit file then when i try to flash it again it says pit file partition failed or something, i try different firmwares from sammobile.
When i installed smart switch it ask for recovery code,
Product Name is SM-G935F
Current Binary is Samsung Official
System Status is Custom
FAP LOCK on
Is there anyone that can help me please i would appreciate it

What error do you get on the phones download mode screen?
Sent from my SM-G935FD using Tapatalk

TOmwbb said:
Hi Everyone
Samsung S7 Edge
Hope someone can help me.
I try flash the stock firmware on odin, but then it says there no pit partition, I download the pit file then when i try to flash it again it says pit file partition failed or something, i try different firmwares from sammobile.
When i installed smart switch it ask for recovery code,
Product Name is SM-G935F
Current Binary is Samsung Official
System Status is Custom
FAP LOCK on
Is there anyone that can help me please i would appreciate it
Click to expand...
Click to collapse
You may have to flash back to the original ROM your device came with, then work your way back up to whichever version you want.
This has worked for me a few times. An example would be I was on N, so had to flash "down" to Marshmallow since nothing N and up (Oreo, Pie) would flash. And the FRP lock will be removed using this method.
If you can get into download mode you can always recover your device, it may take several attempts.

Thanks SteveMurphy,
I will try that but i dont know what rom it was the orginal one, I dont get any error message on my download screen only message i got was in odin was re-partition and then cant not find pit
when add the pit it says set pit file
:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
SteveMurphy said:
You may have to flash back to the original ROM your device came with, then work your way back up to whichever version you want.
This has worked for me a few times. An example would be I was on N, so had to flash "down" to Marshmallow since nothing N and up (Oreo, Pie) would flash. And the FRP lock will be removed using this method.
If you can get into download mode you can always recover your device, it may take several attempts.
Click to expand...
Click to collapse

TOmwbb said:
Thanks SteveMurphy,
I will try that but i dont know what rom it was the orginal one, I dont get any error message on my download screen only message i got was in odin was re-partition and then cant not find pit
when add the pit it says set pit file
:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
I just download latest firmware now, and when i just put in the csc
I get this
ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 301 M
<ID:0/004> SetupConnection..
<ID:0/004> Removed!!
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 2057)
<OSM> All threads completed. (succeed 0 / failed 1)

I would advise you download a ROM older than what you currently have and try that. I had this same issue, with the fail notification, and was able to fix not just that but also the FRP lock by flashing an old ROM (in my case it was a stock Marshmallow ROM from Sammobile).
So put all the files inside the zip (BL, AP, CSC) into their respective slots in Odin and flash it.
If you don't remember what you had, go to Sammobile and download/flash the oldest ROM they have. Latest firmwares will not work while you have FRP lock on.

SteveMurphy said:
I would advise you download a ROM older than what you currently have and try that. I had this same issue, with the fail notification, and was able to fix not just that but also the FRP lock by flashing an old ROM (in my case it was a stock Marshmallow ROM from Sammobile).
So put all the files inside the zip (BL, AP, CSC) into their respective slots in Odin and flash it.
If you don't remember what you had go to Sammobile and download/flash the oldest ROM they have. Latest firmwares will not work while you have FRP lock on.
Click to expand...
Click to collapse
Will try just now.
My windows 10 installed the driver as SAMSUNG MOBILE USB CDC COMPOSITVE DEVICE is that correct

Hi Steve do you maybe perhaps or link how installed TWRP, i still dont come right, Maybe if i installed TWRP in download mode
Thank you

TOmwbb said:
Hi Steve do you maybe perhaps or link how installed TWRP, i still dont come right, Maybe if i installed TWRP in download mode
Thank you
Click to expand...
Click to collapse
Just put the twrp file in AP slot of odin and flash.
Sent from my SM-G935FD using Tapatalk

Reason why i asked i took my phone into service center and they say on the samsung software they use the machine gives SIMRA error i dont know what that is, can it be couse the phone was rooted.
So hope if i use TWRP and go from there should work

TOmwbb said:
Reason why i asked i took my phone into service center and they say on the samsung software they use the machine gives SIMRA error i dont know what that is, can it be couse the phone was rooted.
So hope if i use TWRP and go from there should work
Click to expand...
Click to collapse
No idea what Simra error is. Twrp should work just fine.
Sent from my SM-G935FD using Tapatalk

Yeah thanks everyone for being so kind to me and trying to help me i think the error they say is fimbriae or something they saying they cant load the firmware on. So i think that could be reason maybe the phone is rooted and they cant even load the software

CAn anyone maybe link me the correct TWRP for samsung s7 edge. I see there so many but dont wanna download incorrect one.
Would appreciate it

Is it possible anyone have a Pit file for SM-G935F South africa vodafone

TOmwbb said:
CAn anyone maybe link me the correct TWRP for samsung s7 edge. I see there so many but dont wanna download incorrect one.
Would appreciate it
Click to expand...
Click to collapse
https://eu.dl.twrp.me/hero2lte/twrp-3.3.0-1-hero2lte.img.tar.html
Flash via odin.

Hi Karachi,
I tried TWRP the thing is only thing that stoppig me is odin keep saying set pit partition ive downloaded so many SM-G935F Pit files none of them are working

TOmwbb said:
Hi Karachi,
I tried TWRP the thing is only thing that stoppig me is odin keep saying set pit partition ive downloaded so many SM-G935F Pit files none of them are working
Click to expand...
Click to collapse
My name is Mustafa not Karachi[emoji23]
I live in karachi.
As for your problem, your binary in locked since odin detected an unauthorized download. I'll let you know one I find a solution.
Sent from my SM-G935FD using Tapatalk

Sorry about that thanks would appreciate it very much thank thanks

Anyone can maybe link me I need to download - G935FXXU2ERG2 XFV South Africa vodafone sammobile free download is currently off would appreacite it

HI Mustafa, I downloaded the stock rom Nougar, i tried flash it my phone says SW REV CHECK FAIL(BOOTLOADER) DEVICE 4 BINARY 2