Database Users

[Q] Flashing Modem - Odin mode error: "Secure Check Fail: mdm"

Hey guys,
I'm trying to flash an updated modem on my i337. Right now its modem is AMDB. I've tried to flash both the AMDL, AMDL_U, and AMF3 modems but I keep getting the following error:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1
I'm adding the modem.bin to the CP portion of Odin 3.09. I've tried doing this on three different machines (all w/ the updated samsung drivers). Two Win7 and one Win8. All the same results. My phone says:
Code:
Odin Mode
Product name: SGH-I337
Current Binary: Samsung Official
System Status: Official
CSB-OEM_CONFIG_LSB: 0x30
Write Protection: Enable
Then when I start flashing the following to messages appear right under the write protection message:
Code:
Start [224, 1440]
Secure Check Fail: mdm
After doing this I have to restart the phone for odin to pick it up again. It boots fine normally, and the original AMDL modem still shows.
What's going on w/ this? I've looked in our forums but I can't find anything. I have TWRP installed, and I am rooted.

You're a brave soul. Have you tried this in recovery http://forum.xda-developers.com/showthread.php?p=42418958

jd1639 said:
You're a brave soul. Have you tried this in recovery http://forum.xda-developers.com/showthread.php?p=42418958
Click to expand...
Click to collapse
Well... That was much easier than I thought it would be. Thanks. Might I ask, why say I'm a brave soul?

Trying to flash those modems with odin. Where did you get them? You can brick your phone flashing the wrong stuff.

jd1639 said:
Trying to flash those modems with odin. Where did you get them? You can brick your phone flashing the wrong stuff.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2324667

Is there an actual fix to this issue? The CWM flashable zips don't have the latest baseband.

Blaze9 said:
Is there an actual fix to this issue? The CWM flashable zips don't have the latest baseband.
Click to expand...
Click to collapse
The mf3 cwm flash able zip is the latest modem/baseband for our i337. Its in the thread linked.
Sent from my SGH-I337 using Tapatalk 2

Febby said:
The mf3 cwm flash able zip is the latest modem/baseband for our i337. Its in the thread linked.
Sent from my SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
The zip for MF3 located here is CWM flashable?
http://forum.xda-developers.com/showthread.php?t=2324667
**Edit***
Just tested it. Yeah, they worked. I dunno why the instructions said to use Odin for the Zips as well.
Thanks

Blaze9 said:
The zip for MF3 located here is CWM flashable?
http://forum.xda-developers.com/showthread.php?t=2324667
**Edit***
Just tested it. Yeah, they worked. I dunno why the instructions said to use Odin for the Zips as well.
Thanks
Click to expand...
Click to collapse
Glad I helped. Lack of proper instructions in that thread.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

Please help, I flashed a rom and dont have any signal,
I am using a samsung sgh-m919 and My baseband version is m919uvufok3. I tried installing i9505xxuhpf3 through odin cp but it fails. please help.... ;(

Flash the stock m919 ROM from sammobile.com in Odin. The S4 forum for the m919 is here: http://forum.xda-developers.com/galaxy-s4-tmobile

[CANADIAN] Odin 5.1.1 Bootloader & TWRP Flashable Modem - SM-G920W8 BOI6 *UPDATED*

[CANADIAN] Odin 5.1.1 Bootloader & TWRP Flashable Modem - SM-G920W8 BOI6 *UPDATED*
Rogers is the only carrier who pushed this update, it was pulled shortly after, due to corruption. I had to spend literally ALL day downloading this. I downloaded it 7 times before i got a OTA zip that passes a CRC check and extracted properly. What a pain in the butt it is i had to convert my Telus device to Rogers fully down to modding the EFS to get this done.
Prerequisit: You must be on a 5.1.1 compatible TWRP as well as a 5.1.1 rom when flashing these packages or your going to get stuck in a binary miss match. While there is a fix for this with out the W8 5.1.1 odin packages, it takes a lot of musical flashing. So be sure to be on a compatible 5.1.1 rom, Kernel and TWRP first.
As always, you flash at YOUR OWN RISK. I will of course try to provide support if I am online, If you appreciate how much the pain in my butt was, and you didn't have to do this your self. Click Donate.
The Bootloader MUST be flashed via ODIN 3.10.X or higher. in the BL slot. Hence why its a tar. Sorry no flashables, Samsung locks the boot loader areas to everything but their own signed recovery, from their own signed update.zip
BO8H BL
BOI1 BL
BOI6 BL *LATEST*
The modem is TWRP flashable
BO8H Modem
BOI1 Modem
BOI6 Modem *LATEST*
You can get ODIN 3.10.6 HERE
Samsung USB Drivers HERE
Fingerprint confirmed working by my self. on custom 5.1.1 roms and stock.

You're my hero, lets have sex together

virulentt said:
You're my hero, lets have sex together
Click to expand...
Click to collapse
LOL the new "FIRST!"

-Mr. X- said:
LOL the new "FIRST!"
Click to expand...
Click to collapse
It works thanks a lot haha. No homo btw <3

Hi first of all thousands thanks to you for your work..
i have just quick question.
currently i am on xtrestolite v2.3 how do i flash this latest bootloader ? i tried flashing via odin v 3.10.7 and it failed. would you mind guide me here?

anuben said:
Hi first of all thousands thanks to you for your work..
i have just quick question.
currently i am on xtrestolite v2.3 how do i flash this latest bootloader ? i tried flashing via odin v 3.10.7 and it failed. would you mind guide me here?
Click to expand...
Click to collapse
You must reboot to download mode, and ensure you have the samsung drivers installed. IF you have already done this. paste your odin log.
failing that
please try attached odin instead. If it works i will edit the OP link. .7 worked for me. But either or.

-Mr. X- said:
You must reboot to download mode, and ensure you have the samsung drivers installed. IF you have already done this. paste your odin log.
failing that
please try attached odin instead. If it works i will edit the OP link. .7 worked for me. But either or.
Click to expand...
Click to collapse
this is the log from odin. and just to make sure.. i have to select BL option in odin right?
Code:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!

anuben said:
this is the log from odin. and just to make sure.. i have to select BL option in odin right?
Code:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Click to expand...
Click to collapse
redownload the Bootloader, your .tar could be corrupted.

anuben said:
this is the log from odin. and just to make sure.. i have to select BL option in odin right?
Code:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Click to expand...
Click to collapse
Yes i flashed it via BL. Whats your actual device.

Worked perfectly for me. So glad to have a working fingerprint scanner on a 5.1.1 custom rom. Thanks
Sent from my SM-G920W8

Easiest way to do it is just make sure the Bootloader is loaded on Odin first on your PC then reboot to recovery and flash the modem package, select reboot and choose Download so it reboots to download mode, plug the phone to usb and flash in Odin and you're done!
Sent from my SM-G925F

I'm now getting some new "not enforcing" red text during boot. Is that expected?

BlackRabbits said:
I'm now getting some new "not enforcing" red text during boot. Is that expected?
Click to expand...
Click to collapse
Yep that's normal.
Sent from my SM-G925F

-Mr. X- said:
Yes i flashed it via BL. Whats your actual device.
Click to expand...
Click to collapse
My device is G925w8 but its showing G925F in about phone as i am using xtrestolite v2.3

I've been using Arter97's back-to-n0t3 v3 with his 3.5 kernel, SO SMOOTH I lose around 5 to 7% overnight. You guys should give it a try!
http://forum.xda-developers.com/galaxy-s6/development/to-n0t3-bring-larger-fun-to-flagship-t3179857
http://forum.xda-developers.com/gal...development/arter97-kernel-galaxy-s6-t3171246
*** Download links are on his website (careful, the 3.6 version of his kernel isn't for our device, use the 3.5 g920tw8 one ***
http://arter97.com/browse/S6/
---------- Post added at 07:47 PM ---------- Previous post was at 07:47 PM ----------
anuben said:
My device is G925w8 but its showing G925F in about phone as i am using xtrestolite v2.3
Click to expand...
Click to collapse
that's not for the edge... you could brick your device flashing a non-edge bootloader to an edge one.

anuben said:
My device is G925w8 but its showing G925F in about phone as i am using xtrestolite v2.3
Click to expand...
Click to collapse
This is why, odin is protecting you from your mistake. This is a G920W8 boot loader. It would brick your device if you convinced it to flash some how.
I do not have a G925W8 so i was un able to play musical CSC and FLash to get that OTA before rogers pulled it.
Just as a note guys, the fact that rogers pulled this update. expect all of the Canadian carrier updates to be delayed for weeks now.

-Mr. X- said:
This is why, odin is protecting you from your mistake. This is a G920W8 boot loader. It would brick your device if you convinced it to flash some how.
I do not have a G925W8 so i was un able to play musical CSC and FLash to get that OTA before rogers pulled it.
Just as a note guys, the fact that rogers pulled this update. expect all of the Canadian carrier updates to be delayed for weeks now.
Click to expand...
Click to collapse
holy fuk i shouldn't be doing drinking and flashing :silly: thank you though. appreciate your help...:good:

Thanks Mr. X....Confirmation number: 14Y69764AE724154S a little appreciation of your time. Can I re root and then flash this on my Bell device over 5.0.2? Or should I wait till I get the Bell`s 5.1.1. It has been awhile since I had a Sammy phone. I had a whale of time to get back to stock using Smart Switch and Odin always failed for me. Just want to be able to flash 5.1.1 roms with most stuff working. Thanks again!! My device is the SM-G920W8 Bell S6.

caanda45 said:
Thanks Mr. X....Confirmation number: 14Y69764AE724154S a little appreciation of your time. Can I re root and then flash this on my Bell device over 5.0.2? Or should I wait till I get the Bell`s 5.1.1. It has been awhile since I had a Sammy phone. I had a whale of time to get back to stock using Smart Switch and Odin always failed for me. Just want to be able to flash 5.1.1 roms with most stuff working. Thanks again!! My device is the SM-G920W8 Bell S6.
Click to expand...
Click to collapse
As this is a 5.1.1 boot loader it will require you to be on a 5.1.1 rom. good news is there are many roms to choose from that all work perfect due to my audio patches, and now this boot loader
I would flash TWRP on your 5.0.2 device as it sits, then i would choose your 5.1.1 rom of your liking. Put it all on your storage on the phone except the bootloader tar. Flash the rom, modem and what ever else in TWRP. then in the TWRP reboot options reboot directly to download/bootloader. and odin the bootloader. boot the device normally and you're good!
I do have the rogers ota update zip but i hesitate to distribute it since they pulled it due to bugs, and is uspect corruption ans i had to re-download it several times before it wasn't corrupt from their ota server.
PS: Thanks for the donation!
I am personally running this http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968, with the new boot loader and modem. it runs beautifully.
Any international rom with a kernel for our device and my audio patch will work. the rom i link packs it all up in a bow for you no extra work. finger print will also work since this boot loader

-Mr. X- said:
As this is a 5.1.1 boot loader it will require you to be on a 5.1.1 rom. good news is there are many roms to choose from that all work perfect due to my audio patches, and now this boot loader
I do have the rogers ota update zip but i hesitate to distribute it since they pulled it due to bugs, and is uspect corruption ans i had to re-download it several times before it wasn't corrupt from their ota server.
PS: Thanks for the donation!
I am personally running this http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968, with the new boot loader and modem. it runs beautifully.
Any international rom with a kernel for our device and my audio patch will work. the rom i link packs it all up in a bow for you no extra work. finger print will also work since this boot loader
Click to expand...
Click to collapse
Perfect, I was on that rom for awhile with 5.0.2 and some stuff missing..So the best plan is
1. Re Root and Flash TWRP
2. Back up
3. Flash 5.1.1 Rom
4. Flash Bootloader with Odin
5. Flash Modem with TWRP
And then I should be good to go? Where does the Audio patch come in?
Any other suggestions or order to my plan?
Thanks again for your time and hard work!!!

[HELP] Trying to root,can't turn on wifi...

So basically,got phone last night,tried regular rooting,didn't work,read up some more,tried the whole "Root AT&T Galaxy S4 SGH-I337 on I337UCUFNJ4 Firmware" even though my firmware is I337UCUFNJ5 and not 4,anyway,thread told me to flash I337_NC1_Stock_Kernel using the Odin firmware flashing tool.
I did....used towelroot app 3.0,didn't work,needed internet access (yes I got it straight from their site) fond a 2.0 version,used it,says "you should have root,no reboot required" so since I didn't have wifi on the phone,I went right back into odin and tried to use I337_NJ4_Stock_Kernel and flash it using the Odin tool to get back to the stock NJ4 kernel. Didn't work,failed,now I'm STUCK on nc1 kernel with no wifi access... help? please? this is my first rooting and I am legit clueless to most of this.. also how do I even find my boot loader etc?
EDIT: This might not be in the right thread,if so,please move to appropriate thread moderator.

SageNightmare said:
So basically,got phone last night,tried regular rooting,didn't work,read up some more,tried the whole "Root AT&T Galaxy S4 SGH-I337 on I337UCUFNJ4 Firmware" even though my firmware is I337UCUFNJ5 and not 4,anyway,thread told me to flash I337_NC1_Stock_Kernel using the Odin firmware flashing tool.
I did....used towelroot app 3.0,didn't work,needed internet access (yes I got it straight from their site) fond a 2.0 version,used it,says "you should have root,no reboot required" so since I didn't have wifi on the phone,I went right back into odin and tried to use I337_NJ4_Stock_Kernel and flash it using the Odin tool to get back to the stock NJ4 kernel. Didn't work,failed,now I'm STUCK on nc1 kernel with no wifi access... help? please? this is my first rooting and I am legit clueless to most of this.. also how do I even find my boot loader etc?
EDIT: This might not be in the right thread,if so,please move to appropriate thread moderator.
Click to expand...
Click to collapse
Here is the link for the NJ5 kernel.
If you still have problem go here and following the steps to start every thing from NB1.

sway8966 said:
Here is the link for the NJ5 kernel.
If you still have problem go here and following the steps to start every thing from NB1.
Click to expand...
Click to collapse
so I tried all of this,but odin fails no matter what sigh.. Odin tells me this:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any clue what's wrong? cause I'm really lost here

SageNightmare said:
so I tried all of this,but odin fails no matter what sigh.. Odin tells me this:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any clue what's wrong? cause I'm really lost here
Click to expand...
Click to collapse
Try with different version of odin (the latest is 3.10 I think), use different usb port, use different usb cable.
Did you load your file in the AP (auto partition) slot?

sway8966 said:
Try with different version of odin (the latest is 3.10 I think), use different usb port, use different usb cable.
Did you load your file in the AP (auto partition) slot?
Click to expand...
Click to collapse
Yup I tried all of that except a different odin version,but long story short,I managed to go into town and a friend of mine used a different version of odin and got me nice and sorted out,thanks for help btw

Help special case to flash stock rom in s7 edge 935a

Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it

Darkboss10 said:
Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Click to expand...
Click to collapse
Remove PIT file and try again.
From Edge of Galaxy Seven

Darkboss10 said:
Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Click to expand...
Click to collapse
Not knowing WHAT you are flashing, makes it a little harder to determine what is going wrong.
Go HERE and flash this in Download Mode. This is the latest Stock 935A ROM, This will wipe Everything on the device, and it'll be like it came brand new

norbarb said:
Remove PIT file and try again.
From Edge of Galaxy Seven
Click to expand...
Click to collapse
which is the pit file, sorry for dumb question

Darkboss10 said:
which is the pit file, sorry for dumb question
Click to expand...
Click to collapse
If I remember correctly you need to uncheck PIT in odin and this should help. BTW. What are you trying to flash?
From Edge of Galaxy Seven

I have try the stock rom version 935a...pf2 . And any other stock rom i have found for the 935a seeing which will work .

Darkboss10 said:
I have try the stock rom version 935a...pf2 . And any other stock rom i have found for the 935a seeing which will work .
Click to expand...
Click to collapse
If you are currently on a ROM that has v4 boot loader's, part of your problem may be that you are trying to flash a rom with v2, v3 bootloaders
Sent from my SM-G935T using XDA-Developers Legacy app

so i do better go with the v4 bootloader and i will check if the pit file is uncheck, what should i put on the re-partition case of odin active or inactive?
by the way thanks for your help

kangi26 said:
If you are currently on a ROM that has v4 boot loader's, part of your problem may be that you are trying to flash a rom with v2, v3 bootloaders
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
hey i did exactly as you told me , and for first time i guess i have an advance, i still get an error but at least a new error , check it out maybe you know what it is
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
any idea what can be?
i try to flash the G935a...PI2 rom bot without the CSC which i guess is the pit file right?

When you try to get the device into Recovery, it will appear like it isn't doing it or looks like an "No Command" error and it can take a couple of min to actually get into Recovery.
I would boot into Recovery again, let it sit for a few min. My bet is that it will eventually get into Recovery. Once it does, do a Factory reset, and then reboot into Download Mode, open Odin connect the device to your PC and install all 4 of the items from the Stock ROM thread, don't mess with any of the settings in Odin, just populate the slots with the BL, AP, CP and CSC

kangi26 said:
When you try to get the device into Recovery, it will appear like it isn't doing it or looks like an "No Command" error and it can take a couple of min to actually get into Recovery.
I would boot into Recovery again, let it sit for a few min. My bet is that it will eventually get into Recovery. Once it does, do a Factory reset, and then reboot into Download Mode, open Odin connect the device to your PC and install all 4 of the items from the Stock ROM thread, don't mess with any of the settings in Odin, just populate the slots with the BL, AP, CP and CSC
Click to expand...
Click to collapse
This is what i get . But it doesnt enter recovery at the end. It just shut off ....

Darkboss10 said:
This is what i get . But it doesnt enter recovery at the end. It just shut off ....
Click to expand...
Click to collapse
Looks like the device is just rebooting
Sent from my SM-G935T using XDA-Developers Legacy app

kangi26 said:
Looks like the device is just rebooting
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
if you watch the top corner blue letters it says recovery booting....

Darkboss10 said:
if you watch the top corner blue letters it says recovery booting....
Click to expand...
Click to collapse
I'm at a loss man, I'm sorry. I haven't seen that before, I dont get the "Samsung" part when I enter Recovery

Darkboss10 said:
if you watch the top corner blue letters it says recovery booting....
Click to expand...
Click to collapse
Can you post screen from download mode?
From Edge of Galaxy Seven

norbarb said:
Can you post screen from download mode?
From Edge of Galaxy Seven
Click to expand...
Click to collapse
There you go . By the way i should mention the phone only turns on download mode when plugged.

Darkboss10 said:
There you go . By the way i should mention the phone only turns on download mode when plugged.
Click to expand...
Click to collapse
OK you got bootloader v2. Try to flash some older version of MM in download mode using odin
Like from here: http://forum.xda-developers.com/showthread.php?p=67601581
From Edge of Galaxy Seven

You need to start by using the latest Odin, 3.12.3 for installing the original ROM. If you try to unlock, you need to go get the PrinceComsy version. PrinceComsy won't work for in-bricking a device, and if you have any of the stock versions of the ROM, you need the 3.12.3 version.

norbarb said:
OK you got bootloader v2. Try to flash some older version of MM in download mode using odin
Like from here: http://forum.xda-developers.com/showthread.php?p=67601581
From Edge of Galaxy Seven
Click to expand...
Click to collapse
I try that . Now i got this error but only on the phone screen and odin is stuck at initialization .. any idea what could be

i download the venom stock rom and the odin file he suggest but that odin is v 3.11.2 , so that was the one that trows me the odin protocol error, i try the same rom but with the v 3.12.3 odin , and it start working but it says fail at the on the recovery image, do that has to do something with my problem that the phone can boot into recovery mode?
here are the logs
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> FAIL! (Erase)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1

Cant flash stock firmware.

Hi Everyone
Samsung S7 Edge
Hope someone can help me.
I try flash the stock firmware on odin, but then it says there no pit partition, I download the pit file then when i try to flash it again it says pit file partition failed or something, i try different firmwares from sammobile.
When i installed smart switch it ask for recovery code,
Product Name is SM-G935F
Current Binary is Samsung Official
System Status is Custom
FAP LOCK on
Is there anyone that can help me please i would appreciate it

What error do you get on the phones download mode screen?
Sent from my SM-G935FD using Tapatalk

TOmwbb said:
Hi Everyone
Samsung S7 Edge
Hope someone can help me.
I try flash the stock firmware on odin, but then it says there no pit partition, I download the pit file then when i try to flash it again it says pit file partition failed or something, i try different firmwares from sammobile.
When i installed smart switch it ask for recovery code,
Product Name is SM-G935F
Current Binary is Samsung Official
System Status is Custom
FAP LOCK on
Is there anyone that can help me please i would appreciate it
Click to expand...
Click to collapse
You may have to flash back to the original ROM your device came with, then work your way back up to whichever version you want.
This has worked for me a few times. An example would be I was on N, so had to flash "down" to Marshmallow since nothing N and up (Oreo, Pie) would flash. And the FRP lock will be removed using this method.
If you can get into download mode you can always recover your device, it may take several attempts.

Thanks SteveMurphy,
I will try that but i dont know what rom it was the orginal one, I dont get any error message on my download screen only message i got was in odin was re-partition and then cant not find pit
when add the pit it says set pit file
:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
SteveMurphy said:
You may have to flash back to the original ROM your device came with, then work your way back up to whichever version you want.
This has worked for me a few times. An example would be I was on N, so had to flash "down" to Marshmallow since nothing N and up (Oreo, Pie) would flash. And the FRP lock will be removed using this method.
If you can get into download mode you can always recover your device, it may take several attempts.
Click to expand...
Click to collapse

TOmwbb said:
Thanks SteveMurphy,
I will try that but i dont know what rom it was the orginal one, I dont get any error message on my download screen only message i got was in odin was re-partition and then cant not find pit
when add the pit it says set pit file
:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
I just download latest firmware now, and when i just put in the csc
I get this
ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 301 M
<ID:0/004> SetupConnection..
<ID:0/004> Removed!!
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 2057)
<OSM> All threads completed. (succeed 0 / failed 1)

I would advise you download a ROM older than what you currently have and try that. I had this same issue, with the fail notification, and was able to fix not just that but also the FRP lock by flashing an old ROM (in my case it was a stock Marshmallow ROM from Sammobile).
So put all the files inside the zip (BL, AP, CSC) into their respective slots in Odin and flash it.
If you don't remember what you had, go to Sammobile and download/flash the oldest ROM they have. Latest firmwares will not work while you have FRP lock on.

SteveMurphy said:
I would advise you download a ROM older than what you currently have and try that. I had this same issue, with the fail notification, and was able to fix not just that but also the FRP lock by flashing an old ROM (in my case it was a stock Marshmallow ROM from Sammobile).
So put all the files inside the zip (BL, AP, CSC) into their respective slots in Odin and flash it.
If you don't remember what you had go to Sammobile and download/flash the oldest ROM they have. Latest firmwares will not work while you have FRP lock on.
Click to expand...
Click to collapse
Will try just now.
My windows 10 installed the driver as SAMSUNG MOBILE USB CDC COMPOSITVE DEVICE is that correct

Hi Steve do you maybe perhaps or link how installed TWRP, i still dont come right, Maybe if i installed TWRP in download mode
Thank you

TOmwbb said:
Hi Steve do you maybe perhaps or link how installed TWRP, i still dont come right, Maybe if i installed TWRP in download mode
Thank you
Click to expand...
Click to collapse
Just put the twrp file in AP slot of odin and flash.
Sent from my SM-G935FD using Tapatalk

Reason why i asked i took my phone into service center and they say on the samsung software they use the machine gives SIMRA error i dont know what that is, can it be couse the phone was rooted.
So hope if i use TWRP and go from there should work

TOmwbb said:
Reason why i asked i took my phone into service center and they say on the samsung software they use the machine gives SIMRA error i dont know what that is, can it be couse the phone was rooted.
So hope if i use TWRP and go from there should work
Click to expand...
Click to collapse
No idea what Simra error is. Twrp should work just fine.
Sent from my SM-G935FD using Tapatalk

Yeah thanks everyone for being so kind to me and trying to help me i think the error they say is fimbriae or something they saying they cant load the firmware on. So i think that could be reason maybe the phone is rooted and they cant even load the software

CAn anyone maybe link me the correct TWRP for samsung s7 edge. I see there so many but dont wanna download incorrect one.
Would appreciate it

Is it possible anyone have a Pit file for SM-G935F South africa vodafone

TOmwbb said:
CAn anyone maybe link me the correct TWRP for samsung s7 edge. I see there so many but dont wanna download incorrect one.
Would appreciate it
Click to expand...
Click to collapse
https://eu.dl.twrp.me/hero2lte/twrp-3.3.0-1-hero2lte.img.tar.html
Flash via odin.

Hi Karachi,
I tried TWRP the thing is only thing that stoppig me is odin keep saying set pit partition ive downloaded so many SM-G935F Pit files none of them are working

TOmwbb said:
Hi Karachi,
I tried TWRP the thing is only thing that stoppig me is odin keep saying set pit partition ive downloaded so many SM-G935F Pit files none of them are working
Click to expand...
Click to collapse
My name is Mustafa not Karachi[emoji23]
I live in karachi.
As for your problem, your binary in locked since odin detected an unauthorized download. I'll let you know one I find a solution.
Sent from my SM-G935FD using Tapatalk

Sorry about that thanks would appreciate it very much thank thanks

Anyone can maybe link me I need to download - G935FXXU2ERG2 XFV South Africa vodafone sammobile free download is currently off would appreacite it

HI Mustafa, I downloaded the stock rom Nougar, i tried flash it my phone says SW REV CHECK FAIL(BOOTLOADER) DEVICE 4 BINARY 2