Related
Very easy.
How to go i9220 = how to go back n7000.
1.download the Q1_CHN_bridge_bootloader.tar (LP6) and Q1_20110914_16GB.pit
2.go to download mode
3.run odin (1.87)
4.PIT->Q1_20110914_16GB.pit，BOOTLOADER->Q1_CHN_bridge_bootloader.tar
5.After the end of the screen all black like a brick, but do not be afraid.
6.Unplug the USB-> turn off the ODIN-> disconnect the battery -> Replace the battery
7.POWER+HOME+VOL- HOLD 10S,and then click volume on. Plug the usb,run ODIN.
8.FLASH PIT(Q1_20110914_16GB.pit)+BOOTLOADER (anyone n7000 bootloader)
9. N7000 Return.
And the point of this little exercise is...?
Those that did flash LP5/6 repacks with I9220 bootloaders (Like Chainfire) who now cant flash any roms in PC Odin would hopefully find this useful I assume.
xos84292 said:
Very easy.
How to go i9220 = how to go back n7000.
1.download the Q1_CHN_bridge_bootloader.tar (LP6) and Q1_20110914_16GB.pit
2.go to download mode
3.run odin (1.87)
4.PIT->Q1_20110914_16GB.pit，BOOTLOADER->Q1_CHN_bridge_bootloader.tar
5.After the end of the screen all black like a brick, but do not be afraid.
6.Unplug the USB-> turn off the ODIN-> disconnect the battery -> Replace the battery
7.POWER+HOME+VOL- HOLD 10S,and then click volume on. Plug the usb,run ODIN.
8.FLASH PIT(Q1_20110914_16GB.pit)+BOOTLOADER (anyone n7000 bootloader)
9. N7000 Return.
Click to expand...
Click to collapse
Would appreciate the related download be attached so that we do not get the wrong file and really brick the Note.
I believe there are alot of people need to do this though some find it amusing.
Thank you for your great help.
I google and got the file from some Chinese site.
I did it. It's back to GT-N7000 without GT-i9220 & Yellow Triangle boot up.
Now I am flashing the new HK/Twn ICS ROM
I like to share the files but I don't know how to attach the Pit & Q1_Chn_Bridge_ boot loader
Can someone teach me?
xos84292 said:
Very easy.
How to go i9220 = how to go back n7000.
1.download the Q1_CHN_bridge_bootloader.tar (LP6) and Q1_20110914_16GB.pit
2.go to download mode
3.run odin (1.87)
4.PIT->Q1_20110914_16GB.pit，BOOTLOADER->Q1_CHN_bridge_bootloader.tar
5.After the end of the screen all black like a brick, but do not be afraid.
6.Unplug the USB-> turn off the ODIN-> disconnect the battery -> Replace the battery
7.POWER+HOME+VOL- HOLD 10S,and then click volume on. Plug the usb,run ODIN.
8.FLASH PIT(Q1_20110914_16GB.pit)+BOOTLOADER (anyone n7000 bootloader)
9. N7000 Return.
Click to expand...
Click to collapse
Thank you very much. I restored the bootloader.
There's only one thing: at the step 4 I do this instead:
4.PIT->Q1_20110914_16GB.pit，PDA->Q1_CHN_bridge_bootloader.tar
meanwhile some one tech you (i can't, i'm a noob xD), just put the url no?
Calcu said:
meanwhile some one tech you (i can't, i'm a noob xD), just put the url no?
Click to expand...
Click to collapse
Here you go...
Q1_CHN_bridge_bootloader.tar
http://www.mediafire.com/?r293y43cemr6bw2
Q1_20110914_16GB.pit
http://www.mediafire.com/?7p112578nfm1m2v
sutekidane said:
Here you go...
Q1_CHN_bridge_bootloader.tar
http://www.mediafire.com/?r293y43cemr6bw2
Q1_20110914_16GB.pit
http://www.mediafire.com/?7p112578nfm1m2v
Click to expand...
Click to collapse
THX
Please Post a Link to Original N7000 Bootloader for complete
Hoffighter said:
THX
Please Post a Link to Original N7000 Bootloader for complete
Click to expand...
Click to collapse
This is the bootloader that comes with the newest LPF firmware:
N7000_APBOOT_N7000ZSLPF_CL558430_REV02_user_low_ship.tar.md5
http://www.mediafire.com/?dn5g88dz2k39cwc
yes i am back to n7000 after long time ., thanks alot
Could someone give me a link to a full GB stock rom with GB bootloader?
cs_allu said:
Could someone give me a link to a full GB stock rom with GB bootloader?
Click to expand...
Click to collapse
You don't need flash back tp gb bootloader.,you can use ics bootloader on gb rom.
Sent from my GT-N7000 using xda premium
Great news for i9220 back to n7000 solution!
these are the first 2 files attached for back to n7000
and these are last 2 files to root ICS
It is 100% work great and perfectly back to n7000 from i9220.
Good Luck!
The link for taiwan ICS you can download from
sammobile.com but you have create account once you want to download
it!
Good Luck!
What to flash ??
For the following step,
8.FLASH PIT(Q1_20110914_16GB.pit)+BOOTLOADER (anyone n7000 bootloader)
Can i Flash PIT(Q1_20110914_16GB.pit) and a gingerbread stock rom instead of bootloader.
Stock rom will contain bootlaoders i suppose.
Now i am on i9220ZCLP5 n planning to go back to gb after restoring the n7000 bootloaders.
Thank You.
When I try to flash (4.) it fails
I tried Odin 1.87, 1.85; downloaded again all the files but nothing, Odin says this:
<ID:0/032> Added!!
<ID:0/032> Odin v.3 engine (ID:32)..
<ID:0/032> File analysis..
<ID:0/032> SetupConnection..
<ID:0/032> Initialzation..
<ID:0/032> Set PIT file..
<ID:0/032> DO NOT TURN OFF TARGET!!
<ID:0/032> Get PIT for mapping..
<ID:0/032> Firmware update start..
<ID:0/032> boot.bin
<ID:0/032> NAND Write Start!!
<ID:0/032>
<ID:0/032> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any suggestions?
Thx
back to n7000...
thanks a lot.
gol-D said:
When I try to flash (4.) it fails
I tried Odin 1.87, 1.85; downloaded again all the files but nothing, Odin says this:
<ID:0/032> Added!!
<ID:0/032> Odin v.3 engine (ID:32)..
<ID:0/032> File analysis..
<ID:0/032> SetupConnection..
<ID:0/032> Initialzation..
<ID:0/032> Set PIT file..
<ID:0/032> DO NOT TURN OFF TARGET!!
<ID:0/032> Get PIT for mapping..
<ID:0/032> Firmware update start..
<ID:0/032> boot.bin
<ID:0/032> NAND Write Start!!
<ID:0/032>
<ID:0/032> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any suggestions?
Click to expand...
Click to collapse
Try to flash the LP5 REPACK, than 2 wipe,and do step 4 again.
I am a noob.i flashed lp1 repack..do i need to follow these steps to go back to n7000 or am i already on n7000??do lp1 repack flash bootloader?
Thank u in advance.
If someone needs this tutorial in italian i've translated it.
Check it here
Hey guys as you can tell from this title im an idiot. I was up way to late last night messing with my computer and phone decided it was time to root the gs4. I have rooted hundreds of other devices and ive only soft bricked 1 and fixing was easy just flashing the stock firmware and kernal using odin. So my phone goes into bootloop just going to the samsung splash screen. so i pull the battery put it into DL mode and connect odin it shows up in the ID"COM slot as a yellow button. I select the firmware and click start it gives me an error. I downloaded the .pit file and plugged that into ODIN which was also failed. I have done a fair amount of research and it said i will need to do the Kies emergency firmware recovery. When my phone is plugged into the computer it says device ready to use or just makes the connection sound. I start up Kies and it just gets stuck on connecting. I have gone and downloaded the msxml6 file and updated the registry through cmd prmpt and restarted Kies and still nothing. Please someone help I literally just got my phone back after it taking a swim and really dont want to have to pay more money on an insurance claim.
Relax, it can be fixed. What firmware was your device on and what are you trying to flash in Odin?
Sent from my Nexus 5 using XDA Free mobile app
I was just on stock 4.4.2 i used safestrap to install recovery, i was formatting everything to install my first rom. i am using this tar file that i found on this forum. I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME
fhate803 said:
I was just on stock 4.4.2 i used safestrap to install recovery, i was formatting everything to install my first rom. i am using this tar file that i found on this forum. I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME
Click to expand...
Click to collapse
Ok, very simple solution. The tar you're using isn't going to work if you're on 4.4.2. Use this one and you'll get your device back http://forum.xda-developers.com/showthread.php?p=50912149
Sent from my Nexus 5 using XDA Free mobile app
awesome downloading now will let you know if anything doesnt work.
No luck downloaded the .rar file renamed to a .tar Loaded in the .tar file under pda in Odin3 v1.85 unchecked auto reboot and hit start and here is the message.
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> Rar!
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the same message i have been getting all along with Odin. I am about to dl the .pit for it and try to flash that first.
fhate803 said:
No luck downloaded the .rar file renamed to a .tar Loaded in the .tar file under pda in Odin3 v1.85 unchecked auto reboot and hit start and here is the message.
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
Rar!
NAND Write Start!!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
This is the same message i have been getting all along with Odin. I am about to dl the .pit for it and try to flash that first.
Click to expand...
Click to collapse
You need to extract the rar using winrar or 7-zip. Don't do the pit it won't work
Edit, when you extract the rar you'll get a .tar.md5 file use that in Odin
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You need to extract the rar using winrar or 7-zip. Don't do the pit it won't work
Edit, when you extract the rar you'll get a .tar.md5 file use that in Odin
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Alright i got odin to pass with auto reboot not checked. I pulled the battery and tried to boot into recovery to do a factory reset before rebooting to stock and its stuck on bootloop now any other suggestions?
fhate803 said:
Alright i got odin to pass with auto reboot not checked. I pulled the battery and tried to boot into recovery to do a factory reset before rebooting to stock and its stuck on bootloop now any other suggestions?
Click to expand...
Click to collapse
How long are you giving it? The first boot can take 5 to 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You need to extract the rar using winrar or 7-zip. Don't do the pit it won't work
Edit, when you extract the rar you'll get a .tar.md5 file use that in Odin
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I hoild the power button down it vibrates and the splash screen comes up for like 2 seconds then it is powered back off automatically. When i hold the power button again it does the same thing.
Hi all, I have rooted my galaxys in the past, but I have ran into a problem with this device, I am now only getting ''firmware upgrade encountered an issue please select recovery mode in kies and try again'', I have tried connecting to Kies, but all I get is an error message. I have tried to flash another rom, but I get error messages aswell, and I just stay stuck in the same place .
I have tried to bring my s5 to a local guy who roots and fixes phones, but he could not solve this. Now Samsung will not touch it, as I have voided the warranty.
Please can someone help me, I don't want to loose €400 of a brand new device if someone can help, I will show my appreciation in some way!! Please people, I am so desperate :crying:
Need to ask Qs in the Q&A forum
http://forum.xda-developers.com/galaxy-s5/help
Go to Sammobile .com and download a stock ROM for your model S5
Use ODIN to flash it while the phone is in download mode
Instructions are under the download on sammobiles site
*Detection* said:
Need to ask Qs in the Q&A forum
http://forum.xda-developers.com/galaxy-s5/help
Go to Sammobile .com and download a stock ROM for your model S5
Use ODIN to flash it while the phone is in download mode
Instructions are under the download on sammobiles site
Click to expand...
Click to collapse
thanks for the reply. I tried this and it didnt work, i will upload the error message later, something about not enough storage?
KennethK1992 said:
thanks for the reply. I tried this and it didnt work, i will upload the error message later, something about not enough storage?
Click to expand...
Click to collapse
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Size)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is what i get when i try to flash another rom
Which model S5 is it ?
Choose the correct PIT file for your exact model S5 (Example, mine is the G900F), from here
http://forum.xda-developers.com/showpost.php?p=52329647&postcount=2
Extract it, and add it to the PIT section in ODIN, at the same time as you add the stock ROM to ODIN, and flash them both at the same time
Not sure if this is what you have tried in kies3, but this is what worked for me before when things have gone wrong and i had nothing but a samsung paper weight:
Go into download mode and do a firmware upgrade and initialisation through kies3. You will need your serial number and model number( on the white sticker behind the battery. in kies3 go tools> firmware upgrade and initialisation, then follow the on screen steps. I used this when I soft bricked my note 2 when I had it, I personally find it's the best way to restore a samsung device.
If you have any issues, try checking for kies3 updates to ensure you have the latest drivers, and if you can get into the stock recovery on your phone, you could try doing a factory data reset and cache wipe which also sometimes helps.
KennethK1992 said:
<OSM> Checking MD5 finished Sucessfully..
this is what i get when i try to flash another rom
Click to expand...
Click to collapse
The suggestion of @*Detection* will definitely work if done properly, but before doing that you can try this:
Extract the hidden.img from the firmware that you're trying to install, and rename it as hidden.img.tar, now open Odin, and load that file on AP and flash it. After turning on the phone wait around 5 minutes and it should boot up.
got the phone back from SBE (Samsung's Irish Partner) with a chip on it should i try kies3 before going with odin?
using kies3, the program keeps telling me ''device is not supported'' :crying:
KennethK1992 said:
using kies3, the program keeps telling me ''device is not supported'' :crying:
Click to expand...
Click to collapse
You should use Smart Switch.
Uzair40 said:
You should use Smart Switch.
Click to expand...
Click to collapse
what is smart switch? can I do any of this with a Mac? or should I stick with a windows?
Smart switch is for WiFi.... nothing to do with flashing ROMs
Use ODIN and PIT file as I posted originally
*Detection* said:
Smart switch is for WiFi.... nothing to do with flashing ROMs
Use ODIN and PIT file as I posted originally
Click to expand...
Click to collapse
Yea figured that downloading ROM now, what file extension should the pit file be when I download it? thanks for your help!
KennethK1992 said:
Yea figured that downloading ROM now, what file extension should the pit file be when I download it? thanks for your help!
Click to expand...
Click to collapse
ROM should be .MD5
PIT should be .PIT
Extract the PIT file and the ROM once downloaded to get the correct files
*Detection* said:
ROM should be .MD5
PIT should be .PIT
Extract the PIT file and the ROM once downloaded to get the correct files
Click to expand...
Click to collapse
just waiting for the ROM to finish downloading...
which version of ODIN do you recommend I use? thanks again!
The one in the instructions under the download on sammobiles site, I think it's 3.10.7
But you should be able to use any from 3.09 > 3.10.7
Newest generally recommended unless it fails, then try an older version
When you add a PIT file, ignore the instructions about re-partition, it needs to be ticked for PIT, it will set itself up automatically once you add the ROM and PIT
My samsung s5 brick while rooting and I'm downloading rom from sam mobile hope it will work and if not i will try smart switch method
Moa z Bourhani said:
My samsung s5 brick while rooting and I'm downloading rom from sam mobile hope it will work and if not i will try smart switch method
Click to expand...
Click to collapse
What smart switch method?
Smart switch is a toggle switch in WiFi settings, to tell the phone to switch between Data and WiFi to keep the best signal
Where are people getting this crap from?
*Detection* said:
What smart switch method?
Smart switch is a toggle switch in WiFi settings, to tell the phone to switch between Data and WiFi to keep the best signal
Where are people getting this crap from?
Click to expand...
Click to collapse
it seems to be an updated version of Kies, didn't work for me.
KIES added a setting with an identical name as a setting in Android?.... smart move
KIES is all but useless anyway, ODIN for updates, TWRP for backups
KIES says it has backed up fine, but trying to restore the backup, restores next to nothing
hi all
i bricked my phone recently...n910H
i wanted to return my note4 bootlogo by installing BL_PARAM_Joseph- from sixperience thread
and found it contain the wrong bootloader which may be for 910c
pls help iam very disappointed :crying::crying:
Just go on sammobil.com find the firmware for your phone, and follow the instructions with Odin which is provided on the download page
thejunkie said:
Just go on sammobil.com find the firmware for your phone, and follow the instructions with Odin which is provided on the download page
Click to expand...
Click to collapse
i installed via odin:
the massage in odin :
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> modem.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
i think i had this once, and no matter what i tried, it didnt want to work, but then it was just something stupid, like install odin again, or drivers, or try another usb port.
thejunkie said:
i think i had this once, and no matter what i tried, it didnt want to work, but then it was just something stupid, like install odin again, or drivers, or try another usb port.
Click to expand...
Click to collapse
no nothing wrong here :crying:
i flashed via odin this day in the same manner and there was no problem:crying::crying:
samsung lo said:
no nothing wrong here :crying:
i flashed via odin this day in the same manner and there was no problem:crying::crying:
Click to expand...
Click to collapse
it say on screen Sw rev check fail device 2 binary 1
please help guys pleaase
it dont boot into recovery nor regognized by kies
samsung lo said:
please help guys pleaase
it dont boot into recovery nor regognized by kies
Click to expand...
Click to collapse
I had the same error and fixed it. It often happens due to bootloader and modem, Just download the correct stock firmware for your device, rename it from .md5 to .tar and extract it using 7-Zip, delete or move sboot.bin and modem.bin then make a new 7-Zip archive with .tar extension and install it regulary by Odin
shababik said:
I had the same error and fixed it. It often happens due to bootloader and modem, Just download the correct stock firmware for your device, rename it from .md5 to .tar and extract it using 7-Zip, delete or move sboot.bin and modem.bin then make a new 7-Zip archive with .tar extension and install it regulary by Odin
Click to expand...
Click to collapse
thanks my friend u save me
i will pray for u my friend
love u
samsung lo said:
thanks my friend u save me
i will pray for u my friend
love u
Click to expand...
Click to collapse
you wlcm bro :good:
Hi Everyone
Samsung S7 Edge
Hope someone can help me.
I try flash the stock firmware on odin, but then it says there no pit partition, I download the pit file then when i try to flash it again it says pit file partition failed or something, i try different firmwares from sammobile.
When i installed smart switch it ask for recovery code,
Product Name is SM-G935F
Current Binary is Samsung Official
System Status is Custom
FAP LOCK on
Is there anyone that can help me please i would appreciate it
What error do you get on the phones download mode screen?
Sent from my SM-G935FD using Tapatalk
TOmwbb said:
Hi Everyone
Samsung S7 Edge
Hope someone can help me.
I try flash the stock firmware on odin, but then it says there no pit partition, I download the pit file then when i try to flash it again it says pit file partition failed or something, i try different firmwares from sammobile.
When i installed smart switch it ask for recovery code,
Product Name is SM-G935F
Current Binary is Samsung Official
System Status is Custom
FAP LOCK on
Is there anyone that can help me please i would appreciate it
Click to expand...
Click to collapse
You may have to flash back to the original ROM your device came with, then work your way back up to whichever version you want.
This has worked for me a few times. An example would be I was on N, so had to flash "down" to Marshmallow since nothing N and up (Oreo, Pie) would flash. And the FRP lock will be removed using this method.
If you can get into download mode you can always recover your device, it may take several attempts.
Thanks SteveMurphy,
I will try that but i dont know what rom it was the orginal one, I dont get any error message on my download screen only message i got was in odin was re-partition and then cant not find pit
when add the pit it says set pit file
:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
SteveMurphy said:
You may have to flash back to the original ROM your device came with, then work your way back up to whichever version you want.
This has worked for me a few times. An example would be I was on N, so had to flash "down" to Marshmallow since nothing N and up (Oreo, Pie) would flash. And the FRP lock will be removed using this method.
If you can get into download mode you can always recover your device, it may take several attempts.
Click to expand...
Click to collapse
TOmwbb said:
Thanks SteveMurphy,
I will try that but i dont know what rom it was the orginal one, I dont get any error message on my download screen only message i got was in odin was re-partition and then cant not find pit
when add the pit it says set pit file
:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
I just download latest firmware now, and when i just put in the csc
I get this
ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 301 M
<ID:0/004> SetupConnection..
<ID:0/004> Removed!!
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 2057)
<OSM> All threads completed. (succeed 0 / failed 1)
I would advise you download a ROM older than what you currently have and try that. I had this same issue, with the fail notification, and was able to fix not just that but also the FRP lock by flashing an old ROM (in my case it was a stock Marshmallow ROM from Sammobile).
So put all the files inside the zip (BL, AP, CSC) into their respective slots in Odin and flash it.
If you don't remember what you had, go to Sammobile and download/flash the oldest ROM they have. Latest firmwares will not work while you have FRP lock on.
SteveMurphy said:
I would advise you download a ROM older than what you currently have and try that. I had this same issue, with the fail notification, and was able to fix not just that but also the FRP lock by flashing an old ROM (in my case it was a stock Marshmallow ROM from Sammobile).
So put all the files inside the zip (BL, AP, CSC) into their respective slots in Odin and flash it.
If you don't remember what you had go to Sammobile and download/flash the oldest ROM they have. Latest firmwares will not work while you have FRP lock on.
Click to expand...
Click to collapse
Will try just now.
My windows 10 installed the driver as SAMSUNG MOBILE USB CDC COMPOSITVE DEVICE is that correct
Hi Steve do you maybe perhaps or link how installed TWRP, i still dont come right, Maybe if i installed TWRP in download mode
Thank you
TOmwbb said:
Hi Steve do you maybe perhaps or link how installed TWRP, i still dont come right, Maybe if i installed TWRP in download mode
Thank you
Click to expand...
Click to collapse
Just put the twrp file in AP slot of odin and flash.
Sent from my SM-G935FD using Tapatalk
Reason why i asked i took my phone into service center and they say on the samsung software they use the machine gives SIMRA error i dont know what that is, can it be couse the phone was rooted.
So hope if i use TWRP and go from there should work
TOmwbb said:
Reason why i asked i took my phone into service center and they say on the samsung software they use the machine gives SIMRA error i dont know what that is, can it be couse the phone was rooted.
So hope if i use TWRP and go from there should work
Click to expand...
Click to collapse
No idea what Simra error is. Twrp should work just fine.
Sent from my SM-G935FD using Tapatalk
Yeah thanks everyone for being so kind to me and trying to help me i think the error they say is fimbriae or something they saying they cant load the firmware on. So i think that could be reason maybe the phone is rooted and they cant even load the software
CAn anyone maybe link me the correct TWRP for samsung s7 edge. I see there so many but dont wanna download incorrect one.
Would appreciate it
Is it possible anyone have a Pit file for SM-G935F South africa vodafone
TOmwbb said:
CAn anyone maybe link me the correct TWRP for samsung s7 edge. I see there so many but dont wanna download incorrect one.
Would appreciate it
Click to expand...
Click to collapse
https://eu.dl.twrp.me/hero2lte/twrp-3.3.0-1-hero2lte.img.tar.html
Flash via odin.
Hi Karachi,
I tried TWRP the thing is only thing that stoppig me is odin keep saying set pit partition ive downloaded so many SM-G935F Pit files none of them are working
TOmwbb said:
Hi Karachi,
I tried TWRP the thing is only thing that stoppig me is odin keep saying set pit partition ive downloaded so many SM-G935F Pit files none of them are working
Click to expand...
Click to collapse
My name is Mustafa not Karachi[emoji23]
I live in karachi.
As for your problem, your binary in locked since odin detected an unauthorized download. I'll let you know one I find a solution.
Sent from my SM-G935FD using Tapatalk
Sorry about that thanks would appreciate it very much thank thanks
Anyone can maybe link me I need to download - G935FXXU2ERG2 XFV South Africa vodafone sammobile free download is currently off would appreacite it
HI Mustafa, I downloaded the stock rom Nougar, i tried flash it my phone says SW REV CHECK FAIL(BOOTLOADER) DEVICE 4 BINARY 2