[Q] Back to stock or not, stock ROM failure. - Galaxy S 4 Q&A, Help & Troubleshooting

Hi All, I think I have read everything and tried all methods and I have now run out of ideas. Hoping it's something simple i'm missing.
So my I9505 has been rooted for some time and I would now like to return to stock to give the phone to my mother-in-law.
I am able to access twrp custom recovery and stock recovery modes, I'm able to flash custom rome using twrp. However I don't seem to be able to flash a stock rom using the method below:
http://forum.xda-developers.com/showthread.php?t=2265477&highlight=complete(write)+operation+failed
My phone is currently up and running in the following state:
Android Version: 4.4.2
BaseBand Version: I9505XXUFNAD
Kernel Version: 3.4.0.2091210 [email protected] 1
Build Number: Echoe_Illusion_KOT49H.I9505XXUGNG2
SE for Android Status: Enforcing SEPF_GT-I9509_4.4.2_0018
Secure boot status: Type: Samsung
Security software version: MDFF v1.0 Release 2
Every time I try the odin method above to install stock ROM i get to Complete Write Operation Failed.
I have tried different odin versions, different machines, different cables.
The two ROMs I have tried to flash are:
I9505XXUEMK9_I9505EVREMK1_I9505XXUEMK9_HOME.tar.md5
I9505XXUFNB9_I9505BTUFNE1_I9505XXUFNB9_HOME.tar.md5
Any ideas please
Hopefully something simple I'm doing wrong.

Might be the file u downloaded be corrupt
Try downloading again then wipe dalvik cache and flash.
Sent from my A210 using XDA Free mobile app

rutwikkiller said:
Might be the file u downloaded be corrupt
Try downloading again then wipe dalvik cache and flash.
Sent from my A210 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks, I have done this several times. Still nothing, very frustrating and time consuming

Post the complete Odin log.
Try only 4.4.2 roms and nothing below that.
http://samsung-updates.com/device/?id=GT-I9505
Pick one of the latest and try again.

Lennyz1988 said:
Post the complete Odin log.
Try only 4.4.2 roms and nothing below that.
Pick one of the latest and try again.
Click to expand...
Click to collapse
Cheers, i'll try another one and post the log.

s4fog said:
Cheers, i'll try another one and post the log.
Click to expand...
Click to collapse
Ok I have tried another one from the link supplied:
Failed again here is the odin log and txt from phone screen:
Odin Mode
Product Name: GT-I9505
Current Binary: Custom
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled
eMMC Burst Mode: Enabled
START [224, 1440]
BAR [240, 1440]
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB9_I9505BTUFNE1_I9505XXUFNB9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

s4fog said:
Ok I have tried another one from the link supplied:
Failed again here is the odin log and txt from phone screen:
Odin Mode
Product Name: GT-I9505
Current Binary: Custom
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled
eMMC Burst Mode: Enabled
START [224, 1440]
BAR [240, 1440]
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB9_I9505BTUFNE1_I9505XXUFNB9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Can anyone help with this please?

s4fog said:
Can anyone help with this please?
Click to expand...
Click to collapse
You should download same but new firmware agian via sammobile and try to reflash with other pc...
Sent from my GT-I9500 using XDA Premium 4 mobile app

s4fog said:
Ok I have tried another one from the link supplied:
Failed again here is the odin log and txt from phone screen:
Odin Mode
Product Name: GT-I9505
Current Binary: Custom
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled
eMMC Burst Mode: Enabled
START [224, 1440]
BAR [240, 1440]
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNB9_I9505BTUFNE1_I9505XXUFNB9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It just looks like a standard Odin error.
- Make sure Kies is not running in the background
- Different cable
- Different pc

Lennyz1988 said:
It just looks like a standard Odin error.
- Make sure Kies is not running in the background
- Different cable
- Different pc
Click to expand...
Click to collapse
Hooray!!!! Well I tried another PC, and for some reason this time it has worked. Nothing different about the three machines. Same software, same ROMs, same process. Two wouldn't work, one did.
Thanks again for pushing me to try another machine.

Related

[Q] stock rom flash fail

Hello,
-sorry for my english I dont speak well but...
phone: I9505
I was testing cyanogemod 10.1.3 for a while but then I decided get back to stock rom, did full wipe and put this ROM I9505XXUBMF8 into Odin and start flashing but he said this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-then I couldnt go to system, recovery just to download mode so I flashed TWRP.
(I tried another stock rom, odin, PC but always same problem.)
-then i tried get back CM 10.1.3 via TWRP and it flashed and work without problem.
-then I tried flash omega rom via TWRP and it flashed without problem but booting is very slow and during the logo Samsung it takes about 10mins to boot into system and device is very hot.
-Everything about Kies and antivirus is off.
-Using just original USB cable.
-what says download mode:
ODIN MODE
PRODUCT NAME: gt-i9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
CSB-CONFIG-LSB: 0X30
WRITE PROTECTION: ENABLED
START [224, 1440]
SW REV, CHECK FAIL : FUSED : 2 , BINARY : 1
Any ideas how to resolve this?
Thank you
you have a secured bootloader, you can not flash old firmwares, flash MH8
use search button, there is a lot of threads talking about this issue
samersh72 said:
you have a secured bootloader, you can not flash old firmwares, flash MH8
use search button, there is a lot of threads talking about this issue
Click to expand...
Click to collapse
Thank you so much, I was looking for something all day but i didnt sure what Im really looking for

I bricked my SM-N9005 PLS HELP nothing works

Hi guys i bricked my galaxy note 3 - n9005 and nothing help i ve been trying flash it with odin ,in recovery mode by zip roms - by zip rooms it got stuck on samsung galaxy note 3 title and nothing happen , i want to get my phone back to the stock 4.4.2 rom pls help me nothing works in odin , i ve been trying with those pit files and nothing works :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know what firmware you had before flashing this one?
Did you try another firmware?
Also, is reactivation lock off?
Does the firmware u flash need a pit?
to be honest with you guys im quite amateur in phone things i just wanted get my phone back to stock rom , before i had this rom N9005_JACKYAWAY_NB7.1 even now when i m trying to instal this one from sd card it gets stuck on the screen " SMASUNG GALASY NOTE 3 ". i m not sure this rom requires pit file or not i have been trying flash rom without this pit file and with this pit file - effect is the same :
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
Also, is reactivation lock off?
Click to expand...
Click to collapse
what does it mean ?
odin window :
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK (KK): OFF
KNOX KERNEL LOCK: OXO
KNOX WARRANTY VOID: 0X1
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
WRITE PROTECTIONl: ENABLE
UDC START
jacek88zs said:
to be honest with you guys im quite amateur in phone things i just wanted get my phone back to stock rom , before i had this rom N9005_JACKYAWAY_NB7.1 even now when i m trying to instal this one from sd card it gets stuck on the screen " SMASUNG GALASY NOTE 3 ". i m not sure this rom requires pit file or not i have been trying flash rom without this pit file and with this pit file - effect is the same :
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
what does it mean ?
odin window :
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK (KK): OFF
KNOX KERNEL LOCK: OXO
KNOX WARRANTY VOID: 0X1
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
WRITE PROTECTIONl: ENABLE
UDC START
Click to expand...
Click to collapse
ok.
try this. Go to : http://forum.xda-developers.com/showthread.php?t=2643109
download the latest czech NC2. This one no need pit file.
Just put it under PDA/AP, no need to tick repartition. Then after your phone connected, click start.
Your reactivation lock is OFF already, so no need to worry about this.
Ok thank you, i will try do as you said mate and i will let you know about results as soon as its possible ! hopefuly it will works because i started be worried about i spent lot of money and lost the phone hehe
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
STILL same problem with this czech rom ;///
Weird. Tat error is because the partition which need pit file.
Pardon me, if u don't mind, go to that thread again and download the firmware latest which need pit, download together with the pit, and flash again with repartition being ticked.
Sent from N7105, DN3 with AGNi kernel.
When Odin throws up that error, what does the download mode say?
It always appears when the odin is trying to flash the "system"
jacek88zs said:
It always appears when the odin is trying to flash the "system"
Click to expand...
Click to collapse
I meant, what error appears on the phone screen?
jacek88zs said:
Hi guys i bricked my galaxy note 3 - n9005 and nothing help i ve been trying flash it with odin ,in recovery mode by zip roms - by zip rooms it got stuck on samsung galaxy note 3 title and nothing happen , i want to get my phone back to the stock 4.4.2 rom pls help me nothing works in odin , i ve been trying with those pit files and nothing works :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Your phone is failing on flashing the hidden partition which usually contains the CSC info etc etc
Try downloading this rom or simply to go http://forum.xda-developers.com/showthread.php?t=2643572 or http://forum.xda-developers.com/showthread.php?t=2643109
And which one should i download now and try to flash ? before i have been trying to flash czech ... but still wasgot stuck on " system "
system.img.ext
FAIL! (Ext4)
Guys which one is with pit file and which one propably should get over this bug ?
jacek88zs said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
STILL same problem with this czech rom ;///
Click to expand...
Click to collapse
Also this isnt the stock C2 Rom if you check above it Says AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid. try downloading a stock C2 rom from Sammobile or a mirror but make sure that you reset your phone through recovery once u successfly flash the rom.
i just pastet wrong text from expired window of odin sorry ,the correct was with like screen shows without this " AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_C ERT.tar.md5 is valid. " i ve been trying to instal this czech one
jacek88zs said:
i just pastet wrong text from expired window of odin sorry ,the correct was with like screen shows without this " AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_C ERT.tar.md5 is valid. " i ve been trying to instal this czech one
Click to expand...
Click to collapse
Try Odin 3.09 . Sometimes older version is the issue.
guys i have been tryin with different versions of odin ...same problem on every of them . Can someone tell me step by step what to do just apart of what to do in odin ,i know this ,which rom ,and what css files or whatever ? pls tell me in details how to do this , i propably have some korean version of phone ;/ its 16 gb note 3
jacek88zs said:
guys i have been tryin with different versions of odin ...same problem on every of them . Can someone tell me step by step what to do just apart of what to do in odin ,i know this ,which rom ,and what css files or whatever ? pls tell me in details how to do this , i propably have some korean version of phone ;/ its 16 gb note 3
Click to expand...
Click to collapse
What model does it show ??? remove the battery and look .
Sm-n9005 rf8f10pd75j
@jacek88zs : If urs is 16gb, I think u need a pit file. Urs is hongkong version I guess.
Take a look at this thread :
http://forum.xda-developers.com/showthread.php?t=2631628
Sent from N7105, DN3 with AGNi kernel.

[Q] Newbie Helping : Note 3 soft bricked

Evening all ,
Hopefully someone here can help , Im somewhat of a newbie to this but was currently running Xnote Rom on 4.3 , I tried to upgrade to N9005XXUGNG1 following steps read on a well known website.
I received a "invalid ext4 image" error from odin and now stuck in a soft brick state where i can only access download mode. I am currently trying to get out of this back to a stock phone. I live in the UK and am on EE 4G.
Thanks in advance
UPDATE: Tried flashing N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 with the following results:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
hmm..
try this..
take battery out and put it back in after 30 seconds.. then boot to download mode..
use odin to flash the latest gng1 rom..make sure to tick update bootloader in odin
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Killberty said:
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Click to expand...
Click to collapse
Could you tell me which one , as the latest i can see is the GNG1 and i am not getting on well with that at present
xinfinityoO said:
hmm..
try this..
take battery out and put it back in after 30 seconds.. then boot to download mode..
use odin to flash the latest gng1 rom..make sure to tick update bootloader in odin
Click to expand...
Click to collapse
Same problem..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005H3GGNG1_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Just to let you whats on my download screen too :
the little android man
ODIN MODE
PRODUCT NAME - SM-N9005
CURRENT BINARY: SAMSUNG OFFICAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK(KK): OFF
KNOX KERNAL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2 T2 R2 A3 P1
WRITE PROTECTION: ENABLE
UDC START
ODIN : INVALID EXT4 IMAGE
Hope this helps ... And thanks for trying to help :cyclops:
Sometimes I get the android man and others I get a phone with a warning symbol and a pc saying " Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again".
Killberty said:
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Click to expand...
Click to collapse
It worked , Thank you !!! :good:

SPH-L720 - Trying To Return To Stock. aboot.mbn operation failed

I am trying to get back to stock firmware after using a custom 5.0.2 ROM. I've tried about everything I could find on forums/website and have come up empty handed. I have tried all the general stuff... USB Cables, USB Ports, Computers, etc. In the process of trying to flash back I tried going back to an older version of android which I guess was a bad idea, because that breaks the sound because of KNOX. ¯\_(ツ)_/¯
When trying to flash MJA with Odin this is what I get.
This is what I get on the phone screen.
ODIN MODE
PRODUCT NAME: SPH-L720
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled
eMMC BURST MODE: enabled
START [224, 1448]
SW REV. CHECK FAIL : fused : 5, Binary : 4
This is what shows up in Odin's log window.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUEMJA_L720SPTEMJA_L720VPUEMJA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
anyone? :\
Anyone?
http://forum.xda-developers.com/showthread.php?t=3025279

Cannot Restore Phone! No boot! :( Please help

Hey guys!
I'm working with the I9505 at the moment.
I flashed Omega rom (Version 40) and the Wifi stopped working..
To fix it, I went to Sammobile and just went ahead and got the Stock Australian rom (So far I've tried with the stock 4x roms and none are working, even though the phone was at 4.2.2)
The phone won't take anything from Odin.
I get a "Fail" after trying to flash things to the phone.
The messages aren't always the same, depending on what I'm flashing. The most recent from odin is as follows:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505XSAEMK3_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
The phone screen itself says:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE: enabled
START: [224,1440]
At other times it'll read things like Fused 4, Binary 1 and stuff like that...
Please help
Just tried again with a different firmware and got the following
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNH6_I9505XSAGNH1_I9505XXUGNH6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
screen says
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE: enabled
START: [224,1440]
BAR [240,1440]
Almost all Odin errors can be resolved by the following:
- Different usb port
- Different usb cable.
I9505XXUGNH6
should flash just fine.
The first one you flashed is 4.3 and you probably can't flash that anymore.
Hi!
I got it fixed (I think. Still got some testing to do) by booting the phone until it displayed something along the lines of 'Firmware update error recovery' and THAT 'version' of Odin allowed me to add the "I9505XXUGNH6_I9505XSAGNH1_I9505XXUGNH6_HOME.tar.md5" file
Not sure how that's any different from Odin but yeah, the phone boots, Wifi is on.. everything is fine. Going to try to add Root and TWRP later tonight though

Categories

Resources