Hi All
I have an i9500 Mobile internatiol
i changed imei to be able to use Turkish Sim card and network /
i use this firmware: I9500XXUAMDE_I9500OJVAMDC_I9500XXUAMDE_HOME.tar.md5
in this only method to be able to use turkish network:
in this modem :Service Mode available. and network can register.
whenever phone boots.the network icon Disabled.
So i have to :
1- Diversity RX read value.
2- change service domain.
then network works normally . But sending SMS not possible.
So:
1- is there any method to save or automate this procedure?
and.. where is the setting of Service mode being stored?
2- this procedure only works on :4.2.2 , reason?
3- a modem how can be patched > while there is no known method to unpack modem.bin ?
i will highly appreciate your replays and tries to help.
it is important for us here/
Thanks.
Related
I have an O2 Atom with the following specs:
ROM 20080612B6WWE
EXTROM EX0503
RADIO R060822N_MN1ARC_RS00052
currently running on PDAVIET rom from Sonblack.
My problem is as follows:
1. when i boot up the pda everything goes smoothly except there is a network unavailable message in my home menu and a stupid "no network !" sign at the signal strength meter.
2. interestingly the green LED flashes every few seconds as if logged onto a network provider.
3. more interestingly the green LED flashes every few seconds as if logged onto a network provider even if i remove the SIM card and boot into the OS.
My previous configuration which used to work:
Original ROM from O2 Asia dependent on Windows Mobile 5.1
EXTROM EX0480
RADIO R060822N_MN1ARC_RS00049
Things I have tried to make her work:
1. Tested GSM module --> IMEI OK --> PASS
2. Tested Wifi module ---> PASS --> surfed internet using wifi --> OK
3. Tested Bluetooth module --> PASS --> sent files to another PDA --> OK
4. Tested FM radio module --> PASS --> FM radio working
5. Tested ROM checksum --> PASS
6. Flashed a dozen times using different roms and radio versions eg:
radio versions RADIO R060822N_MN1ARC_RS00052
RADIO R060822N_MN1ARC_RS00049
RADIO R060822N_MN1ARC_RS00048
RADIO R060822N_MN1ARC_RS00038
got these different roms from O2 atom wiki -- keep up the good job guys.
7. finally flashed from the latest O2 Asia provided rom --> USELESS
My theories:
1. There is no possible hardware issue with the internal antennae as i think even the wifi module shares the same antennae and wifi is working like a charm
2. There is no possiblity of a faulty SIM cause i have checked with a dozen different SIMS all of them give a no network error.
3. There is no possibilty of a Hardware error at the SIM contacts cause i can use SIM manager on all SIMS flawlessly and access contacts and sim info on all the dozen SIMS that i tested.
4. I have tested more than six SIMS in manual mode for different bands GSM 900, GSM 1800, GSM 1900 combination and auto mode ---> USELESS.
Extra Information:
1. GPRS is unable to connect --> gives some dailing error.
2. I cannot scan for available networks using manual mode -->
it shows me a scanning for all available networks dialog and then an
empty list is shown where i can select nothing.
3. I cannot scan for available networks using auto mode -->
it shows me a registering on network dialog and then a cannot register on
a selected network error.
4. All of the other SIMS are from different Network providers and are function
well in my other Nokia, Atom life phones.
I am at my wits end <----- to tell you the truth this is the fourth week i have been trying for a solution before posting all the details here.
Please share you theories, ideas, experiences with me on this thread so that other souls might be spared the mental torture of the O2 service centre and their bizzare claims.
Hoping for a solution <------ help me out
PS: Thank You for reading my post ..... your levels of Patience are increasing.
PS: I remember dropping my Atom off a height of 15ft due to which the side
bluetooth tranciever plastic cover came off ....... but hey the atom was
working after that. The real problem started after i flashed the O2 Asia
provided ROM with a some stupid localization update.
PS: Peace !
solved?
i have same problem now did u solved it?
this is my first post..but interesting, i've got the same problem.
i have ipaq 6828 which is similar to atom.the different is, my pda can detect networks in manual search..but always failed everytime i try to connect or register to the network .
..
same here...i'll inform u if find a solution, plz make sure u do the same
Help please, i can't connetc to the internet via my mobileprovider.Can anybody explain how to activate internet step by step?if possible give me a screenshot..thanks in advance
hey if use xxkb3 u have set apn(access point) manually search ur service provider apn setting in google and config it ......
No...my firmware is xxkb1...what to do?
I think therr is nothing to do with firmwars just configure ur access point
Verify with your operator if your settings are correct (i.e. if you have settings) and your gprs/3G is activated
Hi!
If you are unable to connect to 3G Data on your HD2, then follow the steps below to fix the issue:
1- Dial *#*#4636#*#* you will have a menu of testing
2- open Phone information you will see all network info…
3- press on (set preferred network type..
4- change to GSM AUTO …. and done….
This modem is very different from the others. It's kind of interface ethernet-usb or something.
It is not possible or necessary to make the switch to modem only from Hyperterminal or puTTY.
Prerequisites:
1 - ROOT
2 - Modem with unbranded firmware.
To this must go to calcode.webs.com, or https://www.facebook.com/Calcodewebcom, with your IMEI can get the NCK and FLASH CODE CODE for Huawei modems IMEI number 85/86. Since it is the only calculator free to do so. The DC-Unlocker balance no longer free to do so, if you can accomplish for pay.
If you know the IMEI of the modem there are several ways to find out, the easiest is with the DC-Unlocker
Then lower the firmware of this website
http://www.unlockmodemfree.biz/2013/01/upgrade-huawei-e303-firmware-to.html
and flashed from a PC with WINDOWS (they will ask the flash code, there enter the flash code obtained from calcode.webs.com).
If your modem is lock then use the Card Lock Unlock Tool program, download it from the same website, and try to unlock your modem to use with any company (optional).
After this and the tablet off and plug the modem light up. When you turn the tablet will see the signal bar in the lower right corner.
3 - At this point of the tutorial is where I am a little confused. Since I do not know if I got the connection by using the method of xdadevelopers or if this is not necessary (because I did it before trying to connect to the UMTS Manager Root)
Two options: a) http://forum.xda-developers.com/showthread.php?t=2172914
This thread details a method somewhat difficult to do. I did it. Instead of using ES Explorer I used Root Explorer and instead of using the GScript used the Script Manager. The issue here is that after the method nothing happened, no connection established, no sailing. Then I opened the UMTS Manager Root and configured with APN, username and password for my ISP 3G. I used the port / dev/ttyUSB0 and "CONECT" with success.
b) Then it may not be necessary to make the method xdadevelopers and only need ROOT MANAGER UMTS on the tablet, download it from the PlayGoogle
https://play.google.com/store/search?q=UMTS+Manager+root&c=apps
add your apn, username and password. Then select the port / dev/ttyUSB0 and give Connect.
In the end I succeeded. Maybe some other user can play and comment if necessary xdadevelopers method (http://forum.xda-developers.com/showthread.php?t=2172914) before using the UMTS Manager Root or only using this apk wonderful connection is already achieved.
Thanks man
this is cool, just to add, the site you provided for unlcoking of huawei modems is no more in service so i just want to add a place people can generate free unlock codes for Huawei Modems like the E303 as you mentioned.
Huawei Unlock calculator
Urgent matter. I bought a huawei P10 lite from another person, I performed a hard reset and when I finished I can't get any signal on my device. It reads no service or emergency calls only. I tried everything on the net but nothing. The code *#*#4636#*#* doesn't work. The code that does work is *#*#6130#*#* but it's not very helpful. Can anyone help me to turn the radio on. Which code are for this process. Please send me solutions because it's urgent because I can't use my device.
Most likely, the phone is Locked to some mobile carrier.
Unfortunately there is no free way to unlock it!!!
About 3 weeks ago I had the same problems with P8Lite.
Paid solution:
- Go to https://www.dc-unlocker.com/buy and buy 3 credits (3 Euro) and create new account
- After a successful payment on your email you will receive Username and Password (check the Spam folder)
- Download HCU Client - https://hcu-client.com/download/
- Login with your Username and Password
- Put your P10Lite in the Manufacture mode
- Type this: *#*#2846579#*#*
- Go to ProjectMenu -> Background settings -> USB ports settings -> Manufacture mode
- Then connect the phone to PC via USB cable
- Press Read Phone Info
- Go to tap Unlock and press Direct SIM Unlock
- Finally, on the right side you should see Unlock done and the phone will turn off
- Turn on your phone and it will be unlocked.
Tested and works on P8 Lite, HCU cliend support P10 Lite and you can unlock it.
I think that it isn't locked because I tried with 3 different sim cards each in different mobile network.
I am still waiting for solutions. Thank you.
Some problem with IMEI or OEMinfo maybe ?.. try flash new FW
Still the same problem. Does anyone knows the shortcut to engineer mode? The new code because I found on the net some old codes but they didn't work.
There is no engeneering mode in P10 lite.
But as I said, I'm almost sure that phone is locked. Ask the previous owner what SIM card (mobile carrier / country) was used.
There is one other menu that is ProjectMenu
Insert you SIM card and check you SIM Lock status:
*#*#2846579#*#*
ProjectMenu -> Network Information Query -> SIM Lock Info
If you get "SIMLOCK_DEACTIVATE" then all it's okay and your phone isn't locked. But that means you probably have other big problems!
Can your phone has physically malfunction? Sim slots problem?
Also why you didn't test the phone before buying it?
Have you thought about mobile repair service?
Still the same problem
I installed a new software using update option and I get signal for five minutes but I wasn't able to use it because it didn't connect to network, then the no service and emergency calls only appear, oscillating between sim cards. The sim cards used are in different mobile service.
If I install Oreo the problem could disappear?
If so can anyone send me the link that I can download and install using update.app method?
If not could you suggest me a different solution.
Now shows that it's charging but the percentage of the battery drops.
Could be the same software problem?