Hi!
If you are unable to connect to 3G Data on your HD2, then follow the steps below to fix the issue:
1- Dial *#*#4636#*#* you will have a menu of testing
2- open Phone information you will see all network info…
3- press on (set preferred network type..
4- change to GSM AUTO …. and done….
Related
It seems all operation with cellular data modem is not woking on this phone:
csd internet is not working,
c++ function RasDial, RIL_dial not working,
applications that can work with modem - vxhpc, mtoken (www.choung.net) is not working
Is anybody successfully use any from this list?
I have try all of this on two i900 with different software versions
Most carriers to date have chosen not to enable CSD functionality while connected to 3G services.
try set your network BAND selector manually to “GSM” by using the following procedure:
For Windows Mobile Communicators (Pocket PC):
1. Select “Start” -> Settings.
2. Under the “Personal” tab select “Phone”.
3. Select the “Band” tab.
4. Under “Select your network type.” Choose “GSM”.
5. Choose “ok” to exit the settings page.
Hello,
I have a storage drive with data on it that I want to be able to access from my HD2 but sadly I can't get it to connect. I have connected to the WiFi successfully and have the expected network address but I can't get it to connect. I have tried the following:
1. Go to file explorer
2. Menu > Go To > Open Path
3. New Path
4. \\dm105
5. I also tried \\IPADDRESS
I guessing the problem is due it being attached to a Windows 7 machine. Does anyone have any idea how to make it work? My windows XP box can connect to the drive no problem...
With \\IPADDRESS it says that network resource cannot be found. With \\DM105 it says my connection settings are missing but then I don't know what to do...
I get exactly the same problem, I'd expect at least a login prompt!
This may solve the problem
- Go to Settings -> All Settings (to get the original Windows Setting) -> Connections -> Wi-fi -> Click on Wireless Network -> Choose your network for the list -> change 'Connects to': from 'internet' to 'Work'.
Try to connect again from file explorer.
Good Luck
Hi All
I have an i9500 Mobile internatiol
i changed imei to be able to use Turkish Sim card and network /
i use this firmware: I9500XXUAMDE_I9500OJVAMDC_I9500XXUAMDE_HOME.tar.md5
in this only method to be able to use turkish network:
in this modem :Service Mode available. and network can register.
whenever phone boots.the network icon Disabled.
So i have to :
1- Diversity RX read value.
2- change service domain.
then network works normally . But sending SMS not possible.
So:
1- is there any method to save or automate this procedure?
and.. where is the setting of Service mode being stored?
2- this procedure only works on :4.2.2 , reason?
3- a modem how can be patched > while there is no known method to unpack modem.bin ?
i will highly appreciate your replays and tries to help.
it is important for us here/
Thanks.
Hello,
I am currently in South Africa and I was having a problem connecting to 'data services.' I posted in another thread about the data issue and a user recommended I perform
*#*#4636#*#* ,
'Select Radio Band' -
Choose 'USA Band.'
Restart
After I did this, the phone would now not connect to the cellular network AT ALL.
I reset network settings, now I factory wiped my phone and still it is not connecting.
Can someone advise what the correct Band 'Should be.' When I enter the Select Band menu I only see:
Set GSM / UMTS band:
Options to Select:
USA Band
Band mode 6
Band mode 7
Below in the Phone Info page it has 'Set preferred network type which is set to LTE/GSM/CDMA auto (PRL)
Can someone please help?
i can't connect to data mobile after i update my S5 G900P to 5.0 lollipop i have exclamation mark next to signal network i tried almost everything to fix it, i can connect to wi-fi the exclamation mark will disappear and when i turn the wifi off the mark shows again i can make calls and messaging
what i have tried so far
--Rebooting
--Disable / enable Cellular Data
--Remove / re-insert / reseat the existing SIM card
--Fully replaced with brand new SIM card from carrier store
---Wipe Cache Partition
---Do factory reset
--APN Settings > changing to another APN > reboot
--APN Settings > Menu > Reset to Default > select my carrier APN again > reboot
--Disabling WiFi > rebooting
--Toggling airplane mode > rebooting
--Create new APN > activated > disable / enable mobile data
--Change network mode more than ones > reboot > but my sim card support GSM/UMTS mode other wise network operators disappe.
--Selected automatic network operators and selected manual i get (registered on network ) > check and unchecked mobile data
so please need help i have to connecte to mobile data almost every day