Database Users

UK Vodaphone GPRS Settings

Hi, ive checked to see if this has been covered before and can't see that it has but apologies if it has. I have an unlocked XDA II which i intend to use on Vodaphone. Does anyone have the setup details (preferably in dummy speak) to enable vodaphone GPRS on it?
Many thanks in advance if you could share them with me.
Regards.

Hi,
Is easy all you have to do is just follow this step by step instruction
1. you have to setting the connection, by going to start, setting and connections
2. after you get to the connections please chose the connection setting
3. under the my ISP, chose “manage existing connection”
4. either you create a new connection or modified the existing one the setting is will be the same
5. on fist page setting you fine “enter a name of connection” underneath you can just create a name for your connection
6. on “select a modem” please scroll down and select the cellular Line (GPRS)
7. on the next is “access point name” just fill it with internet
8. the user name : [email protected]
9. password : user …….. then press finish
I hope this instruction is helpful for you, any problem let me know :wink:

Up and running
Hi, i'm up and running now, thanks for your help, do u know how to set up the MMS at all?

GUIDE: Mac OS X and Cingular GPRS with the HTC Wizard AKU2

I have successfully connected with the Qtek 9100 AKU2 ROM (the latest stable ROM for HTC Wizard) to Cingular via Bluetooth and Mac OS X 10.4.6. Instructions:
1. Pair OSX and the phone. You might need to check the "any device" checkbox on OSX's pairing utility.
2. Verify to OSX that you do want to use that device as a modem (if you don't get that dialog, then you will need to create the Bluetooth connection yourself -- message me or leave a comment if you need instructions and I will reply to you).
3. RENAME the attached iPAQ-GSM.txt to plain iPAQ-GSM (remove the .txt extention using the Finder 'Get Info' dialog). Copy the file "iPaq-GSM" to your /Library/Modem Scripts/ folder. I modified the original script that was floating on the internet for a year now in order to work with Cingular (the original script wouldn't get a carrier signal with my phone -- it needed some small initialization changes).
4. Go to your System Preferences/Network/Bluetooth/. There enter the following:
Service Provider: Cingular
Account Name: [email protected] (case sensitive)
Password: CINGULAR1 (case sensitive)
Tel number: *99# (the *99***1# number that does work with other phones doesn't work with the HTC Wizard)
On PPP options uncheck "tcp header compression".
On the Modem tab uncheck both "enable error correction" and "wait for dial tone". From the modem drop-down menu select the iPaq-GSM modem script.
Then, click Apply and then open the "Internet Connect" application and select Bluetooth from there. Click "Connect" and you should now be connected on the net via Cingular GPRS/EDGE.
Alternatively, you can create a new networking bluetooth connection instead of using the generic bluetooth networking pref panel, but that involves a bit more work -- although I personally prefer it as I have over 8 phones and I need different networking connection names and settings for each, instead of using the default "Bluetooth" one. If you are on the same boat, IM me or leave a comment for more instructions.

Thanks
dude you just made my day. It works perfectly. Thank God for people smarter then me.

Unfortunately, in my AKU2 QTek ROM, the PPP server dies right after I disconnect from the Mac. I have to reboot the PocketPC before I can reconnect my Mac to GPRS.
If anyone knows more, please download the script above and tell us if there is a way to fix this.

more mac users
hey guys,
just wondering if you've been able to sync your MDA(Wizard) to your mac. and if so, how? also, any luck updating ROMS without a PC?
whalien

Using the Atom as a BT modem for a PC

Hi Guys,
I'm really stumped here, i have been on the www for days trying to findout how to get my Atom to work as a BT Modem for my PC. I keep going round in circles trying to locate the file USBMDM.INF but can not find this file anywhere. I have followed links to advise that i need to start "Modem Link" from program files but then i need the USBMDM.INF file to go to the next step....at least i think i do???......... can anyone help me to set up my Atom as a modem for my Laptop PC??
Thanx for any assistance that you can give.

instruction:
XdaAtom_Wireless.zip

Without pictures the instruction look like follows:
XdaAtom – Wireless Modem via Bluetooth
a.) Pairing Devices
1. To turn on Bluetooth on your device. Tap Start --> Settings --> Connection --> Bluetooth
2. Check on "Turn on Bluetooth" and "Make this device discoverable to other devices"
3. Tap on "Devices" and tap on "New Partnership..." to search for bluetooth devices.
4. Select your computer name and tap on "Next" to pair the devices.
5. Key in Passkey (for example "0000") and tap "Next" to continue.
6. On your computer, key in the same Passkey and click "OK".
7. On your device, check on "Serial Port" and click "Finish"
8. A partnership will be created on your device. Tap "OK".
b.) Disable incoming beam files
1. on your device, tap on Start --> Settings --> Connections --> Beam. Untick "Receive all incoming beams" and tap "OK".
c.) Disable Microsoft Active sync on your computer.
1. On your PC, launch Microsoft Activesync. Click on File  Connection Setting
2. Uncheck “Allow USB Connections” and “Allow connections to one of the following” then Click “OK”
3. Microsoft Activesync is disabled.
d.) Configuring Modem
1. On your computer, click on Start --> Control Panel --> Phone and Modem Options
2. Click on "Modem" tab and select "Bluetooth DUN Modem" then click on "Properties".
3. Select “Advanced” tab and type in Extra initialization commands and Click “OK”.
** Depending on which service you want to create a connection to, you have to use the appropriate APN name and replace the “internet”. You may want to refer to your operator or its web site for the APN names.
e.) Create a Dial-up Connection
1. on your computer, Start  Control Panel  Network Connection
2. Click on “Create a new connection”.
3. Open the "New Connection Wizard" in XP and select “Connect to Internet” and click “Next”.
4. Choose “Set up my connection manually” and click “Next”.
5. Select “Connect using a dial-up modem” and click “Next”.
6. Tick on “Bluetooth DUN Modem” only and click “Next”.
7. Type in any name for your connection and click “Next”.
8. Type in Phone Number “*99#” and click “Next”
9. Type in Username and Password required (if any) and click “Next” then “Finish”.
10. Press “Dial” to connect to your modem connection.
11. If everything worked fine, you should able to get connected.
** You may want to refer to your computer’s Bluetooth software manufacturer for more information regarding to the dialing method.
f.) Disconnect Wireless Modem
1. To disconnect the connection, right-click on the dial-up connection and click on "Disconnect"

Thanx for the detailed set-up instructions Kropotov!
I follwed to the letter but at this time I'm still unable to get it all to work. When i enable the PC dial up connection it activeate the Atom cos the back light come on abd the BT symbol in the PC system tray changes colour. However it does not want to get past this stage and no signs of the GPRS sybol coming on the PPC...........I know my GPRS APN is "NET" with user name being the operator and the password being "WAP" but still nothing working. I just don't know why it should be so hard to establish a link via BT or USB cable. It was easier to do on my old Nokia 6030 about 5 years ago than it is on my Atom!
Regards
Chris.

try to connect to GPRS using USB connection...
Can you go to internet from your Atom?

How do I know which COM port the ActiveSync is using......would it be COM1 by default? When i try to set up a DUN modem the only ports that i can see are all Bluetooth ports that i have created, I do nt get the choice for COM1.
I also found some instructions from O2 on how to set up an Xda II to act as a modem, in these instructions you set up a new standard modem on the PC, disable Activesync on the PC then deactivate "Receive all beams" on the PPC and then activate "Modem Link" on the PPC. Then when you plug in the PDA to the PC via USB cable the computer will detect new hard ware and try to install a drive, I have not been able to locate the required driver o the internet so can not get any further with this method. The driver is on the OEM CD supplied with the device and as I'm away from home i can not check if i have the driver on the CD that came with the Atom. The driver i called "HTC USB Modem".

angusc :wink:
http://www.rapidshare.ru/27257

Kropotov,
I can't figure out how to download the file from this site, sorry to be such a pain.

http://dl.rapidshare.ru/27257/99530/USBMDM.INF

Thanx again for your continued support and assistance but that link is not working for me at this time, i will try it again later to hopefully get to that file!!

give me your mail. I will send you

kropotov,
Thx for the file, i installed a new modem on my PC and then activated the "modem link" on my PPC and installed the driver when prompted, but alas still not working. I think it is to do with the assigned COM port for the modem on the PC, I can only seem to choosE COM 4, 9, 13, 14, 15 when installing the modem to PC. I would think that the Atom would be com port 1-3 as it is connected to one of my PC USB ports......
Will keep playing and let you know if I manage to get it to work......Thanx for all your help.

Request Modem Driver for O2 XDA Atom
Dear all, Please anyone send me the Bluetooth modem driver, I just lost my CD, also the USB modem driver for O2 XDA Atom thanks alot
Cipto
O2 Atom

Request for BT modem driver
Hi, I'm looking for BT modem driver (.inf) to install in PC.
I'm using O2 Atom and my PC is Dell Latitude D420.
Thanks in advance for any help.

XDA Atom usb driver
Hi,
I'd like to know if somebody can send for me the drivers for my XDA Atom, because I don't have the original CD.
Thanx
Alvaro

xda atom driver
Hi,
I just found the correct drive for XDA Atom in the internet:
http://files.pdamobiz.com/Tools/atom_usbmdm.rar
I hope it help....
Alvaro

Is it possibe to use the usb/bluetooth modem to receive incoming connections?
Thanks.

Jebril can you pls send the same driver for my h/s ....Thanx.

Serial Port not appearing while teaming
Hi
I followed the following steps:
1. To turn on Bluetooth on your device. Tap Start --> Settings --> Connection --> Bluetooth
2. Check on "Turn on Bluetooth" and "Make this device discoverable to other devices"
3. Tap on "Devices" and tap on "New Partnership..." to search for bluetooth devices.
4. Select your computer name and tap on "Next" to pair the devices.
5. Key in Passkey (for example "0000") and tap "Next" to continue.
6. On your computer, key in the same Passkey and click "OK".
7. On your device, check on "Serial Port" and click "Finish"
My O2 Atom is not showing any serial port to select
any idea?
Regards

kropotov said:
instruction:
XdaAtom_Wireless.zip
Click to expand...
Click to collapse
Good work mate, but still wait for the laptop to come

wireless modem

Has someone connected a laptop to internet using TyNT?
I cant. I did it with my htc universal using the wireless modem or internet sharing (aku 3.2).
But TynT hasnt "internet sharing utility" and my laptop doesnt recognize it as modem. Some idea?
thanks

Do you have under programs wireless modems? If you launch this and got to usb then start; your laptop/pc will pnp and request instalation of drivers, I think the drivers and software are on the wiki. Also remember to use the correct APN name i.e. for T-mob uk it is general.t-mobile.uk

cool this worked fine for me, i just needed to change the apn settings from "internet" to "general.t-mobile.uk"

Check the Hermes FAQ: there's a section about using TyTN as a laptop modem...
http://wiki.xda-developers.com/index.php?pagename=Hermes_FAQs
Bye

It worked when i used my Univesal. But now, when a click "start" in wireless modem app and plug it to the laptop nothing happens.....No hardware detected......

im usin orange spv m500. when i connect the phone to my laptop using USB cable, nothin happens. no hardware detected. it doesnt prompt to install any driver.. pls help!! :!:

It works fine for me with a BlueTooth connection. I don't think anybody has it working over USB.
It works fine using a Dial-up Connection from Windows.... you don't need to activate the Wireless Modem on the TyTN... in fact doing so will prevent it from working...

Hi.Yes, it works setting a dial-up connection with bluetooth but i want to use the wireless modem usb because the dial-up system closes the connection if you receive a phone call.......
I miss the utility "internet sharing" from Universal Aku 3.2. I hope it is present in next TyNT rom....

i have found the solution
go to start > programs > wireless modem
select connection type USB
tap Start
then connect ur mobile device to ur laptop or pc. it will detect new hardware n will prompt to install driver. u can download the driver and utility from here
Code:
http://dl1.uploadgalaxy.com/files/e52d58daacf8/USB_Modem.zip.html

when I plug the tynt in my pc or my laptop (with the wireless app running on usb) nothing happens....

mine is a spv m500. OS is windows mobile 2003. it detects new hardware only when u plug in after pressing the start button

Yes. I have Imate pocket pc and Imate jasjar and it works in than way. But it doesnt work with TyNT (for me)

shafiu said:
i have found the solution
go to start > programs > wireless modem
select connection type USB
tap Start
then connect ur mobile device to ur laptop or pc. it will detect new hardware n will prompt to install driver. u can download the driver and utility from here
Code:
http://dl1.uploadgalaxy.com/files/e52d58daacf8/USB_Modem.zip.html
Click to expand...
Click to collapse
Hi I used have functional connection from my laptop to TyTN using USB cable. but since last week it started telling me that there is some remote access error (I have tried different cable to check whether it is broken or not ... didn't help)
so I removed the HTC USB modem .. so I could re-do it .. since then I can't install it again .. it evern doesn't detect the TyTN so I could process it using wizard mode .. and when I want to do it manually it doesn't work as well
can somebody please help?
thx in advance

dherrero said:
when I plug the tynt in my pc or my laptop (with the wireless app running on usb) nothing happens....
Click to expand...
Click to collapse
Yup, exactly the same here, any ideas anyone?
Thanks.
M.

have you
1. disabled USB/Serial connections in ActiveSync and
2. started the "Wireless Modem" application?

not helping .. I am starting to think about HR .... BT connection is toooo slow :/
EDIT .. I have used HR ... created new connection .. tested it (it worked) and used back-up .. now it doesn't work again and keep teeling me about some access error 680
I am going for finall HR I am affraid ...

a BT modem connection will at best have less than half the speed of a wired USB one... (see my previous benchmark thread).

goestoeleven said:
have you
1. disabled USB/Serial connections in ActiveSync and
2. started the "Wireless Modem" application?
Click to expand...
Click to collapse
Yes i have do so but nothing append pc dont want see the tynt.
I have try 3 part program like mobile stream usb modem...
But nothing work for me..
I have give a look to wiki faq but nothing this url:
thread 1:http://forum.xda-developers.com/viewtopic.php?t=59586 and
Thread 2; http://forum.xda-developers.com/viewtopic.php?t=57841 are simply death link...
Have somebody an idea???
thx

works through usb no problem
Part I: Install USB Modem Driver
1. Make sure that your PocketPC does not connect with your PC
2. Disable ActiveSync USB port connect on your PC
3. Tap device Start->Programs->Wireless Modem -> Tools->Options, and input your APN of your service provider. Then tap “OK”
4. Make sure the “Connection Type” selected ”USB” , Now press the button “Start” , and connect your device with PC through USB cable
5. On your desktop PC will found a new hardware
6. Select “No, not this time” and press “Next”
7. Select “Install from a list or specific location (Advanced)” and press “Next”
8. Specify USB Modem driver(USBMDM.inf) path and press “Next”
9. Press “Continue Anyway” to continue install USB Modem driver
10. Press “Finish” to finish driver install
11. After installation you have a new USB Modem called “HTC USB Modem” in Control Panel->Phone and Modem Options
Part II: Create New USB Dialer
1. In “Control panel”, select “Network Connections”
2. Click “Create a new connection”
3. Press “Next” to start Dialer create process
4. Select “Connect to the Internet” then press “Next”
5. Select “Set up my connection manually” then press “Next”
6. Select “Connect using a dial-up modem” then press “Next”
7. Select your “USB Modem” then press “Next”
8. Input modem ISP Name, like “ABC”, then press “Next”
9. Input dialup number “*99#” then press “Next”
10. Select “Anyone’s use” or “My use only” then press “Next”
11. Input “User Name” and “Password”, default is empty, then press “Next”
12. Check/Uncheck “Add a shortcut to this connection to my desktop” then press “Finish”
13. After setup completed, you can see a new dialer in “Network Connections”
14. Execute your new USB Modem Dialer(ABC)
15. Press “Dial” to dialup to network
works 100% tried it fine. document was taken off somewhere i think on the wiki so no thanks to me. Just to confirm via usb works fine and it is quick

sk8funk said:
Part I: Install USB Modem Driver
1. Make sure that your PocketPC does not connect with your PC
2. Disable ActiveSync USB port connect on your PC
3. Tap device Start->Programs->Wireless Modem -> Tools->Options, and input your APN of your service provider. Then tap “OK”
4. Make sure the “Connection Type” selected ”USB” , Now press the button “Start” , and connect your device with PC through USB cable
5. On your desktop PC will found a new hardware
6. Select “No, not this time” and press “Next”
7. Select “Install from a list or specific location (Advanced)” and press “Next”
8. Specify USB Modem driver(USBMDM.inf) path and press “Next”
9. Press “Continue Anyway” to continue install USB Modem driver
10. Press “Finish” to finish driver install
11. After installation you have a new USB Modem called “HTC USB Modem” in Control Panel->Phone and Modem Options
Part II: Create New USB Dialer
1. In “Control panel”, select “Network Connections”
2. Click “Create a new connection”
3. Press “Next” to start Dialer create process
4. Select “Connect to the Internet” then press “Next”
5. Select “Set up my connection manually” then press “Next”
6. Select “Connect using a dial-up modem” then press “Next”
7. Select your “USB Modem” then press “Next”
8. Input modem ISP Name, like “ABC”, then press “Next”
9. Input dialup number “*99#” then press “Next”
10. Select “Anyone’s use” or “My use only” then press “Next”
11. Input “User Name” and “Password”, default is empty, then press “Next”
12. Check/Uncheck “Add a shortcut to this connection to my desktop” then press “Finish”
13. After setup completed, you can see a new dialer in “Network Connections”
14. Execute your new USB Modem Dialer(ABC)
15. Press “Dial” to dialup to network
works 100% tried it fine. document was taken off somewhere i think on the wiki so no thanks to me. Just to confirm via usb works fine and it is quick
Click to expand...
Click to collapse
Hi, read/found it somewhere in the wiki, and it works as you described.
Only thing is always start the modem first before connecting to the PC. Works everytime for me:
Connected speed: 230.4 kpbs (good enough for me as I'm on EDGE connection)
Regards,

Connecting to Network Storage

Hello,
I have a storage drive with data on it that I want to be able to access from my HD2 but sadly I can't get it to connect. I have connected to the WiFi successfully and have the expected network address but I can't get it to connect. I have tried the following:
1. Go to file explorer
2. Menu > Go To > Open Path
3. New Path
4. \\dm105
5. I also tried \\IPADDRESS
I guessing the problem is due it being attached to a Windows 7 machine. Does anyone have any idea how to make it work? My windows XP box can connect to the drive no problem...
With \\IPADDRESS it says that network resource cannot be found. With \\DM105 it says my connection settings are missing but then I don't know what to do...

I get exactly the same problem, I'd expect at least a login prompt!

This may solve the problem
- Go to Settings -> All Settings (to get the original Windows Setting) -> Connections -> Wi-fi -> Click on Wireless Network -> Choose your network for the list -> change 'Connects to': from 'internet' to 'Work'.
Try to connect again from file explorer.
Good Luck