UK Vodaphone GPRS Settings - Networking

Hi, ive checked to see if this has been covered before and can't see that it has but apologies if it has. I have an unlocked XDA II which i intend to use on Vodaphone. Does anyone have the setup details (preferably in dummy speak) to enable vodaphone GPRS on it?
Many thanks in advance if you could share them with me.
Regards.

Hi,
Is easy all you have to do is just follow this step by step instruction
1. you have to setting the connection, by going to start, setting and connections
2. after you get to the connections please chose the connection setting
3. under the my ISP, chose “manage existing connection”
4. either you create a new connection or modified the existing one the setting is will be the same
5. on fist page setting you fine “enter a name of connection” underneath you can just create a name for your connection
6. on “select a modem” please scroll down and select the cellular Line (GPRS)
7. on the next is “access point name” just fill it with internet
8. the user name : [email protected]
9. password : user …….. then press finish
I hope this instruction is helpful for you, any problem let me know :wink:

Up and running
Hi, i'm up and running now, thanks for your help, do u know how to set up the MMS at all?

Related

GUIDE: Mac OS X and Cingular GPRS with the HTC Wizard AKU2

I have successfully connected with the Qtek 9100 AKU2 ROM (the latest stable ROM for HTC Wizard) to Cingular via Bluetooth and Mac OS X 10.4.6. Instructions:
1. Pair OSX and the phone. You might need to check the "any device" checkbox on OSX's pairing utility.
2. Verify to OSX that you do want to use that device as a modem (if you don't get that dialog, then you will need to create the Bluetooth connection yourself -- message me or leave a comment if you need instructions and I will reply to you).
3. RENAME the attached iPAQ-GSM.txt to plain iPAQ-GSM (remove the .txt extention using the Finder 'Get Info' dialog). Copy the file "iPaq-GSM" to your /Library/Modem Scripts/ folder. I modified the original script that was floating on the internet for a year now in order to work with Cingular (the original script wouldn't get a carrier signal with my phone -- it needed some small initialization changes).
4. Go to your System Preferences/Network/Bluetooth/. There enter the following:
Service Provider: Cingular
Account Name: [email protected] (case sensitive)
Password: CINGULAR1 (case sensitive)
Tel number: *99# (the *99***1# number that does work with other phones doesn't work with the HTC Wizard)
On PPP options uncheck "tcp header compression".
On the Modem tab uncheck both "enable error correction" and "wait for dial tone". From the modem drop-down menu select the iPaq-GSM modem script.
Then, click Apply and then open the "Internet Connect" application and select Bluetooth from there. Click "Connect" and you should now be connected on the net via Cingular GPRS/EDGE.
Alternatively, you can create a new networking bluetooth connection instead of using the generic bluetooth networking pref panel, but that involves a bit more work -- although I personally prefer it as I have over 8 phones and I need different networking connection names and settings for each, instead of using the default "Bluetooth" one. If you are on the same boat, IM me or leave a comment for more instructions.
Thanks
dude you just made my day. It works perfectly. Thank God for people smarter then me.
Unfortunately, in my AKU2 QTek ROM, the PPP server dies right after I disconnect from the Mac. I have to reboot the PocketPC before I can reconnect my Mac to GPRS.
If anyone knows more, please download the script above and tell us if there is a way to fix this.
more mac users
hey guys,
just wondering if you've been able to sync your MDA(Wizard) to your mac. and if so, how? also, any luck updating ROMS without a PC?
whalien

help i have no mms profile on my spv m500

hi all i have done bs and update my spv m500 to 1.13 i have been trying to get MMS to work on my UK Orange SPV M500 i look at the settings as described
The instructions read...
Setting up the MMS profile
Tap on Start and then Messaging.
Tap on Accounts and select MMS.
Tap on Tools and select MMS Settings...
Tap on the Connect via: drop down list and select
Tap on the Servers tab.
Tap on New.
In the Server name: field, enter
In the Gateway: field, enter
In the Port number: field, enter
In the Server address: field, enter
Tap on OK.
Tap on ok.
Tap on x to close the settings.
but i have no mms profile on my spv just seeing is there a cab file to sort this out or what is need to fix this problem thanks
Download and extract an ext rom from the ftp then install the mms cab file to your device then apply the settings for your provider.
hi thanks for your help so far as i am still new two all this would you be able to send me the link and some more info on how do set it all up thanks
You could use this Orange GPRS & MMS setup cab.
Copy it to your phone & run it & all the settings will be installed for you.
If your pay as you go you will need to make a slight tweek to the mms settings (remove the "C" from the server name)
Hope this is helps.
If Mister B's last post won't be of help to you, here's the link to the ftp's ext roms; ftp://ftp.xda-developers.com/Magician/Extended_Roms/. Download and extract the zip file. What you need is the cab file which part of its filename is MMS. You'll have to go to your provider's support home page for mms settings.
still no luck
hi thanks for all your help so far i have try Orange_UK_Contract_Magician.CAB still not luck it still not working
i try to have a look on the ftp://ftp.xda-developers.com/Magician/Extended_Roms/ but i get a error windows cannot access this folder make sure you typed file name correctly and that you have
premission to access the folder
so what the next best think to do thanks
This may sound stupid, but you need to log in to have access to the ftp. Maybe it is some setting in your browser. Try using an ftp program and use xda for the username and password.

T-Mobile UK MMS Settings Using AKU 3 2.11.255 HTC ROM

Hi
I've downloaded the ROM & upgraded my Vario 2, without any problems.. The only issue I have is MMS, I've set it up using the settings listed on the T-Mobile site, but when I attempt to send a msg to check it, it connects OK, but doesn't send the message...
Can any other T-Mobile UK Vario 2 users let me know their settings?
Thanks!
You can download all the T-Mobile customisation cabs here inc the MMS settings:
Here
Hi
I've downloaded the T-Mobile UK Ext ROM & ran it but it hasn't changed anything.. any ideas?
from Modaco thread:
Network : T-Mobile
Country : UK
GPRS Connection :
Connects to : "The Internet"
Access Point : "general.t-mobile.uk"
User Name : "user"
Password : "wap"
Primary DNS : blank
Secondary DNS : blank
GPRS WAP Connection :
Connects to : "WAP Network"
Access Point : "general.t-mobile.uk"
IP : "149.254.001.010"
User Name : "user"
Password : "wap"
GPRS MMS Connection :
Access Point : "general.t-mobile.uk"
IP : "149.254.211.010"
User Name : "user"
Password : supplied on registration <==?????
MMSC : http://mmsc.t-mobile.co.uk
Out of interest did you have to CID unlock your phone or did it just let you upgrade the ROM?
gavinmoffitt said:
Hi
I've downloaded the ROM & upgraded my Vario 2, without any problems.. The only issue I have is MMS, I've set it up using the settings listed on the T-Mobile site, but when I attempt to send a msg to check it, it connects OK, but doesn't send the message...
Can any other T-Mobile UK Vario 2 users let me know their settings?
Thanks!
Click to expand...
Click to collapse
Don't know if tis is a stupid question, but could you use MMS before?
With my Vodafone (UK) contract I had to add MMS as a separate package.
I just used the settings on the T-Mobile website and it works perfectly.
There are 2 parts to setting up MMS:
1. Setting up the connection settings: http://www.manuals.t-mobile.co.uk/start.asp?manual=1677
2. Configuring the Picture Messaging settings: http://www.manuals.t-mobile.co.uk/start.asp?manual=1677
Got it sorted - tried the settings listed on MoDaCo, which didn't work... found a pdf on T-Mobile's website, with different settings & those worked...
Thanks to everyone who replied!
Could you please put the link in to the pdf in case someone else needs this? Thanks.
Hi
The PDF is in the T-Mobile users area & you need a valid number to access it. However the settings are:
Setting up your Picture Messaging profile
1. Select the Start menu and then Messages.
2. Select Messaging
3. Select Menu and Tools then select Options
4. Tap on MMS
5. Tap on the Servers tab.
6. Tap on New.
7. In the box Server name enter T-Mobile MMS
8. In the box Gateway enter 149.254.201.135
9. In the box Port number enter 8080
10. In the box Server address enter http://mmsc.t-mobile.co.uk:8002
11. Select the Connect via drop down list and select your internet profile (T-Mobile Internet or T-Mobile GPRS
(Web))
12. Select the WAP Version drop down list and select WAP 2.0
13. Select OK
14. With T-Mobile MMS highlighted, tap on Set As Default
15. Select ok
Hope this helps!
thank you!

Rogers, Canada GPRS and MMS cab needed

I have search everywhere for this, I never post questions cause I can usually find the answer, I have checked throughout XDA and google and check multiple forums. I have been reading on how to create a cab file I just don't have the time right now to sit down and work on it for hours. Walshieau has a site going for Provxml and Xml Config Loader but he hasn't got to North America. If anybody has a cab or is skilled at making one the settings are minimal, I have included them.
If you can help many thanks.
Rogers CANADA
GPRS Settings
1. Operator Name & Country : Rogers Canada
2. Network Name : MY ISP
(Name in the Connections Tab)
3. Modem Name :ROGERS GPRS
4. Modem Access Point Name :internet.com
5. Username :wapuser1
6. Password :wap
7. Domain :””
8. Is there a tick in the 'This network connects to the Internet' box :
NO
9. Is there a tick in the 'This network uses a proxy server' box :
NO
MMS Settings
2. Network Name : MY Work Settings
(Name in the Connections Tab)
3. Modem Name :ROGERS MMS
4. Modem Access Point Name :media.com
5. Username :media
6. Password :mda01
7. Domain :””
8. Is there a tick in the 'This network connects to the Internet' box :
NO
9. Is there a tick in the 'This network uses a proxy server' box :
NO
1. Server Name :Rogers MMS
2. Gateway :172.25.0.107
3. Port Number : 8080
4. Server Address : http://mms.gprs.rogers.com
5. Connect Via : My Work settings
6. Size Limit : 300
7. WAP Version : 2.0
I made a workaround for the cab file, I will be working on making a cab file and post for those interested at the following site, for now the work around works great.
http://forum.xda-developers.com/showthread.php?t=303046&page=3
Rogers htc touch Rom
Any Rogers htc touch Rom?????
You won't get a Rogers Rom here, you can get ROM made from other users but not the official ROM from Rogers.

gprs settings for hutch(india)

can anybody please help....i want the gprs and mms settings for hutch(nw vodafone)in india.....
Gprs settings for Vodafone
go to
Start>Settings>connections>>connections>My ISP> Add a new modem
Enter name (may be any name of your choice) - Vodafone
Slect modem - Cellular line (GPRS)
Next>
Access point name - www
next >
Finish
done
Thank you so much... it was helpful

Categories

Resources