Database Users

O2 Xda II Configuration for Globe Telecom Philippines

Connections Configuration:
Under Start > Settings > Connections > Connections > Advanced > Select Network, Create 3 new entries:
Globe WAP Configuration:
1. Connection Name: myGlobe WAP
2. Modem: Cellular Line (GPRS)
3. Access Point Name: www.globe.com.ph
4. No Username, Password and Domain
5. Use server-assigned IP address
6. Use software compression
7. Use IP header compression
8. Proxy Settings: Advanced > WAP Server: 203.177.42.214 / Port: 9201
Globe Internet Configuration:
1. Connection Name: myGlobe Internet
2. Modem: Cellular Line (GPRS)
3. Access Point Name: internet.globe.com.ph
4. No Username, Password and Domain
5. Use server-assigned IP address
6. Use software compression
7. Use IP header compression
8. No Proxies
Globe MMS Configuration:
1. Connection Name: myGlobe MMS
2. Modem: Cellular Line (GPRS)
3. Access Point Name: mms.globe.com.ph
4. No Username, Password and Domain
5. Use server-assigned IP address
6. Use software compression
7. Use IP header compression
8. No Proxies
MMS Composer Configuration:
Under MMS Compser > Tools > Options > "Servers" Tab:
Create New Server:
1. Server Name: myGlobe MMS
2. Gateway: 192.40.100.20
3. Server Address: http://192.40.100.22:10021/mmsc
Under MMS Compser > Tools > Options > "Preferences" Tab:
1. Connect Via: myGlobe MMS
2. Connect to Server: myGlobe MMS
3. The other settings you can leave default or change them to what suites you.
Notes:
1. WAP addresses should be preceeded by wsp:// instead of http://
2. You have to switch connections between the "myGlobe WAP" and the "myGlobe Internet" connections depending on the type of access you wish to use. (i.e. wsp://.... uses "myGlobe WAP", and http:// uses "myGlobe Internet")
3. Switching to "myGlobe MMS" is not required to send and retrieve MMS messages.
All these settings work for me, hope it dows for you too.

Thanks for your post!
Galing!

That's Great, @ least I know the configuration even I'm not there. 8)

Globe Philippines MMS settings for PPC 2003
ZeroExtreme seems to know a lot about this.
I upgraded my XDA II to the new Asian Edition that was posted here and the MMS configuration is different from the old version. The connection is still the same but the MMS composer software is different and I cannot get it to work.
I guessed that the port should 10021 but I cannot get it to work.
Has anyone experienced getting MMS to work on the new Asian Edition software for Globe Telecom Philippines?

Re: Globe Philippines MMS settings for PPC 2003
Galadai said:
ZeroExtreme seems to know a lot about this.
I upgraded my XDA II to the new Asian Edition that was posted here and the MMS configuration is different from the old version. The connection is still the same but the MMS composer software is different and I cannot get it to work.
I guessed that the port should 10021 but I cannot get it to work.
Has anyone experienced getting MMS to work on the new Asian Edition software for Globe Telecom Philippines?
Click to expand...
Click to collapse
Use the AutoConfig program in the Xda II, it should set all your connections (Internet, GPRS/WAP and MMS)

Globe Philippines MMS settings for PPC 2003
I tried that when I first upgraded and it severely corrupted the MMS options. The servers had no names and couldn'tbe editted either. It didn't work either so I did a reload of 2003 and told it not to autoconfigure.
ThE auto configure I'd tried to use was at the option that comes up after a hard reset. Is there another way that works?
Thanks...

What ROM version are you using? SE or the 1.72 from UK that was customized for Asia?

Globe Philippines MMS settings for PPC 2003
To tell you the truth, I'm not sure which flavour's what now, had tried various updates and this one seems stable..
Details are:
ROM Version: 2.06.00WWE
ROM Date: 06/14/04
Radio Version: 1.18
Protocol Version: 1337.38
ExtROM Version: 2.06.100a
Does that tell you anything?

Globe Philippines MMS settings for PPC 2003
Hi ZeroXtreme, it was your version, Customized WM2003SE ROM - Asian Edition, that you posted on 5th Dec....
Does that help?

Re: Globe Philippines MMS settings for PPC 2003
Galadai said:
Hi ZeroXtreme, it was your version, Customized WM2003SE ROM - Asian Edition, that you posted on 5th Dec....
Does that help?
Click to expand...
Click to collapse
I immediately posted version 2 of the customized ROM, since the extended ROM of the first one is based on the non-SE OS.
Look for the version 2 of the customized extended ROM for SE, the autoconfig here correctly configures the MMS with the new MMS messaging application.

CUstomised Extended Rom
Thnx Zero, can I just load the extended ROM or do I need to do a complete reload of everything?

Globe Telecom Philippines - MMS Settings
I ended up doing a complete reinstall and MMS is working fine now. Thanks ZeroX
For Anyobody's reference the following is the configuration for the MMS settings for Globe Telecom in the MMS Composer:
Server name: Globe Telecom
Gateway: 192.40.100.20
Port number: 9201
Server address: http://192.40.100.22:10021/mmsc

could you tell me how to set gprs for pda2k globe telecom

Help with O2 Xda II Configuration for Globe Telecom Philippines
Good day.
I have followed the instrutions given on the forum about configuring my O2 XDA II's MMS and GPRS for globe but until now i have not been able to access the wap site.
I have gotten my phone from a friend who has not been using it full potential. but when i tried to use its iexplorer it could not connect to the wap site. I have gone to the globe offices here in the south but still they are unable to help me get connected.
please help me. would i still need to reformat my pocket pc and reinstall a new os for this to work?

UK Vodaphone GPRS Settings

Hi, ive checked to see if this has been covered before and can't see that it has but apologies if it has. I have an unlocked XDA II which i intend to use on Vodaphone. Does anyone have the setup details (preferably in dummy speak) to enable vodaphone GPRS on it?
Many thanks in advance if you could share them with me.
Regards.

Hi,
Is easy all you have to do is just follow this step by step instruction
1. you have to setting the connection, by going to start, setting and connections
2. after you get to the connections please chose the connection setting
3. under the my ISP, chose “manage existing connection”
4. either you create a new connection or modified the existing one the setting is will be the same
5. on fist page setting you fine “enter a name of connection” underneath you can just create a name for your connection
6. on “select a modem” please scroll down and select the cellular Line (GPRS)
7. on the next is “access point name” just fill it with internet
8. the user name : [email protected]
9. password : user …….. then press finish
I hope this instruction is helpful for you, any problem let me know :wink:

Up and running
Hi, i'm up and running now, thanks for your help, do u know how to set up the MMS at all?

T-Mobile UK MMS Settings Using AKU 3 2.11.255 HTC ROM

Hi
I've downloaded the ROM & upgraded my Vario 2, without any problems.. The only issue I have is MMS, I've set it up using the settings listed on the T-Mobile site, but when I attempt to send a msg to check it, it connects OK, but doesn't send the message...
Can any other T-Mobile UK Vario 2 users let me know their settings?
Thanks!

You can download all the T-Mobile customisation cabs here inc the MMS settings:
Here

Hi
I've downloaded the T-Mobile UK Ext ROM & ran it but it hasn't changed anything.. any ideas?

from Modaco thread:
Network : T-Mobile
Country : UK
GPRS Connection :
Connects to : "The Internet"
Access Point : "general.t-mobile.uk"
User Name : "user"
Password : "wap"
Primary DNS : blank
Secondary DNS : blank
GPRS WAP Connection :
Connects to : "WAP Network"
Access Point : "general.t-mobile.uk"
IP : "149.254.001.010"
User Name : "user"
Password : "wap"
GPRS MMS Connection :
Access Point : "general.t-mobile.uk"
IP : "149.254.211.010"
User Name : "user"
Password : supplied on registration <==?????
MMSC : http://mmsc.t-mobile.co.uk
Out of interest did you have to CID unlock your phone or did it just let you upgrade the ROM?

gavinmoffitt said:
Hi
I've downloaded the ROM & upgraded my Vario 2, without any problems.. The only issue I have is MMS, I've set it up using the settings listed on the T-Mobile site, but when I attempt to send a msg to check it, it connects OK, but doesn't send the message...
Can any other T-Mobile UK Vario 2 users let me know their settings?
Thanks!
Click to expand...
Click to collapse
Don't know if tis is a stupid question, but could you use MMS before?
With my Vodafone (UK) contract I had to add MMS as a separate package.

I just used the settings on the T-Mobile website and it works perfectly.
There are 2 parts to setting up MMS:
1. Setting up the connection settings: http://www.manuals.t-mobile.co.uk/start.asp?manual=1677
2. Configuring the Picture Messaging settings: http://www.manuals.t-mobile.co.uk/start.asp?manual=1677

Got it sorted - tried the settings listed on MoDaCo, which didn't work... found a pdf on T-Mobile's website, with different settings & those worked...
Thanks to everyone who replied!

Could you please put the link in to the pdf in case someone else needs this? Thanks.

Hi
The PDF is in the T-Mobile users area & you need a valid number to access it. However the settings are:
Setting up your Picture Messaging profile
1. Select the Start menu and then Messages.
2. Select Messaging
3. Select Menu and Tools then select Options
4. Tap on MMS
5. Tap on the Servers tab.
6. Tap on New.
7. In the box Server name enter T-Mobile MMS
8. In the box Gateway enter 149.254.201.135
9. In the box Port number enter 8080
10. In the box Server address enter http://mmsc.t-mobile.co.uk:8002
11. Select the Connect via drop down list and select your internet profile (T-Mobile Internet or T-Mobile GPRS
(Web))
12. Select the WAP Version drop down list and select WAP 2.0
13. Select OK
14. With T-Mobile MMS highlighted, tap on Set As Default
15. Select ok
Hope this helps!

thank you!

Rogers toronto MMS settings?!?!

Anyone in the toronto area know how to get the MMS working?
I have called rogers and they don't know how to setup a WM6 TYTN
MN6 - Black satin
Radio - 1.51
too much else to list.
Any help would be REALLY appreciated.

THIS WORKS PERFECTLY!
I have been suffering on the phone with rogers for weeks!
I came upon this message below and it works!
Rogers expert tech's said the Vodaphone 1605 was not compatible with
their network for MMS! It works everytime with these settings and it's fast!
Enjoy!
Rogers CANADA
GPRS Settings
1. Operator Name & Country : Rogers Canada
2. Network Name : MY ISP
(Name in the Connections Tab)
3. Modem Name :ROGERS GPRS
4. Modem Access Point Name :internet.com
5. Username :wapuser1
6. Password :wap
7. Domain :””
8. Is there a tick in the 'This network connects to the Internet' box :
NO
9. Is there a tick in the 'This network uses a proxy server' box :
NO
MMS Settings
2. Network Name : MY Work Settings
(Name in the Connections Tab)
3. Modem Name :ROGERS MMS
4. Modem Access Point Name :media.com
5. Username :media
6. Password :mda01
7. Domain : leave empty
8. Is there a tick in the 'This network connects to the Internet' box :
NO
9. Is there a tick in the 'This network uses a proxy server' box :
NO
1. Server Name :Rogers MMS
2. Gateway :172.25.0.107
3. Port Number : 8080
4. Server Address : http://mms.gprs.rogers.com
5. Connect Via : My Work settings
6. Size Limit : 300
7. WAP Version : 2.0

HTC maple Connection setup

Hey guys
I use Wind mobile and the 3vo rom found in this forum.
My only problem is that the connection setup included in the rom is very old and it doesn't have wind mobile in its database.I went around looking for a newer version to install and I found this in another forum.
http://forum.xda-developers.com/showthread.php?p=12807575#post12807575
"HTC Connection Setup PPC v3.1.2016.2829.cab"
However,upon installing,I don't know how to access the new program.When I select the connection setup,I get the following message:
"Can't find 'Connectionsetup' (or one of its components).Make sure the path and filename are correct and that all the required libraries are available."
Anyone with solutions to this?
THanks.

You can set this up manually through the settings->connections->GPRS
The settings are there:
http://www.howardforums.com/showthread.php/1691746-Wind-Internet-Settings

Problem solved.
Here is the solution:
I called up Wind and they weren't much help.
And yes I have gone through the link jeromecornet posted above before.
Anyways,I installed Wind's rom just to see the specific setting for
the maple.
I had to use do the instructions posted on this page below to accessed them
as they were deny.
http://stevenharman.net/blog/archive/2008/10/03/windows-mobile-internet-connection-sharing-hack.aspx
I Used Total Commander to access the Registry.
Here are the settings for the MMS to work correctly on the HTC Maple
for Wind.This is for anyone else in the same place with a wind mobile
HTC Maple.
Start - Settings - MMS Settings
Menu - MMSC settings
Add this in
NAME: WIND MMS
MMSC URL: http://mms.Windmobile.ca
WAP GATEWAY: 74.115.197.70
PORT: 8080
CONNECT VIA: WAP Network
MAX SEND SIZE: 300k
WAP VERSION: wap 2.0
Than go to Connections in Settings than GPRS and add the following
two:
1)
Name:Wind Internet
Connects to: The Internet
Access Point: internet.windmobile.ca
leave the rest BLANK.
2)
Name:Wind MMS
Connects to: WAP Network
Access Point: mms.windmobile.ca
leave the rest BLANK.
This is settings straight from the Windmobile 6.5 rom.
Happy image texting!