Database Users

LG L70 Wifi problems

Hi, I had Wifi Problems on my LG L70
I downloaded an app that makes my sd card be the main storage, because there was nothing in the settings that makes your sd card be the main storage(internal storage) The name of The app is Int-SdCard write fix When i finished downloaded the app and opened it. there was a fix me and download button at the bottom of the fix me button. it needed root so i rooted my phone, after that when i pressed download button, there was a box that says Downloading and nothing happend.. i press the Fix me button but nothing happend.. Everything was fine Wifi was working and everything else.
So i thought of restarting my phone so the fix would work. But when i restarted it and i turned on Wifi it says Error
I tried Bluetooth still it Freeze All the things that needed connection is all broken. Is there a way to fix this?
I saw some troubleshoots and tried them.
I tried hard reset but no work. Also i checked "about phone" in settings. all i saw In the hardware Information and Software was "Unavailable"
I cant even root my phone anymore due to this, and i dont want it in the repair shop because too expensive, and takes months to fix it.
Phone Number: Unknown
IMEI: Unknown.
IMEI SV: Unknown
Wi-Fi Mac address: Unavailable
Bluetooth address: Unknown
Model number: LG-D370
Android Version: 4.4.2
Baseband Version: Unknown
Kernel Version: 3.4.0+
Build Number: KOT49I.A1408025071
Software Version: V10c-ESA-XX

Will not instal OTA software update Plus MTP problem

Hi all
Just bought an unlocked Sprint S4
Two problems
The lollipop OTA update aborts with message: "/system/media/BST_bootsamsung.qmg" has unexpected contents.
E: Error in /cache/update.zip (status 7) Installation aborted.
Secondly when connecting the S4 to a PC I get message from PC saying: 'the last usb device you connected to this computer malfunctioned and windows does not recognise it'
I've installed kies no help there.
searched for remedies tried developer options etc on the phone all to no avail.
cannot get windows to recognise the phone as mtp device
when I plug it in I get no notifications on the phone
it does show its charging
running windows 10

Sorted the usb problem, used the direct computer usb port and it was recognised, presumably not enough power from hub ports.
Can anyone help with the failure to update to lollipop?

[email protected] said:
Sorted the usb problem, used the direct computer usb port and it was recognised, presumably not enough power from hub ports.
Can anyone help with the failure to update to lollipop?
Click to expand...
Click to collapse
Search for your phone and Download a Firmware for your phone from www.sammobile.com and install it via Odin
Refer to any Flashing Guide or search Google on how to use Odin

Thanks
I found two firmwares with my code
Model SPH-L720
Model name GALAXY S4
Country Spint (cdma)
Version Android 4.4.2
Changelist 2162929
Build date Wed, 09 Jul 2014 00:09:48 +0000
Product code SPR
PDA L720VPUFNG2
CSC L720SPTFNG2
and
Model SPH-L720
Model name GALAXY S4
Country Unknown
Version Android 4.4.2
Changelist 2162929
Build date Wed, 09 Jul 2014 00:09:48 +0000
Product code XAS
PDA L720VPUFNG2
CSC L720SPTFNG2
cannot work out which is mine

[email protected] said:
cannot work out which is mine
Click to expand...
Click to collapse
Give me your phone info

RubbaBand said:
Give me your phone info
Click to expand...
Click to collapse
ok

Why won't Mobile Odin flash Android 5.0.1 on my S4 GT-I9505?

I have a Galaxy S4 GT-I9505 that I purchased online. It turns out that the Android firmware (4.4.2) does not match the phone's CSC code. I have been trying to flash a stock ROM for Android 5.0.1 that *does* match the phone's CSC code, but Mobile Odin won't proceed. My phone is properly rooted, and Mobile Odin starts correctly, but when I try to open the tar.MD5 file, it says "Partition could not be found in file." It did let me wipe the phone, and the phone properly booted up again in 4.4.2. What can I do to make this work?
Would it help to flash an Android 4.4.2 that matches the phone's CSC? Is there something else I can try? I'm fairly new at this kind of hacking, but I'm learning quickly! Here are my phone's details:
Android version: 4.4.2
Product Code: GT-I9505ZKAXSG
Original CSC Code: XSG
Firmware CSC: XSG
PDA Version: I9505XXUGNG2
Bootloader Version: I9505XXUGNG2
Baseband: I9505XXUGNG2
CSC Version: I9505OJVFNF1
Kernel Version: 3.4.0-2091210 [email protected] #1 32-bit
Thanks for any help you can offer. Oh, also, just to make clear, I cannot connect this phone to a desktop with a USB cord -- I have tried every possible variety of driver install, and #$%&* Windows will not recognize the phone.

Let's verify your phone model. Enter download mode (power, volume down, and the home button) and read off the device's model number at the top left of the screen. As to the driver issue, you really want to get that resolved. Download the driver from here and install it.

If you do not want your phone to be bricked, I suggest you stay away from Mobile Odin.
Use FlashFire instead. Same principe, only newer.

phone info
Strephon Alkhalikoi said:
Let's verify your phone model. Enter download mode (power, volume down, and the home button) and read off the device's model number at the top left of the screen. As to the driver issue, you really want to get that resolved. Download the driver from --- and install it.
Click to expand...
Click to collapse
Thanks for your help. The phone model listed in download mode is GT-I9505.
I tried the driver that you linked to, but it didn't work--I suspect when my phone once fell off a table while plugged into the charger, the phone connection got damaged. I can charge the battery just fine, but connecting to a computer through the cord is no longer possible. However, I have been successfully transferring stock ROM files onto the phone with the Software Data Cable app.

Then replace the connector. That board is separate from the motherboard and shouldn't be too expensive.

latest official EE UK stock rom question.

Hi
I updated my Galaxy s7 edge ee to...
ModelSM-G935F
Model nameGalaxy S7 edge
CountryUnited Kingdom (EE)
VersionAndroid 6.0.1
Changelist9519568
Build dateThu, 15 Dec 2016 09:37:03 +0000
Security Patch Level2016-12-01
Product codeEVR
PDAG935FXXU1BPLJ
CSCG935FEVR1BPK5
I did this via Odin as no ota has appeared yet. Just wondering if anyone knows why s health says my device can no longer track my heart rate and there's no option for WiFi calling anymore? Any help would be very much obliged.
Dan
Sent from my SM-G935F using XDA-Developers Legacy app

It sounds like there was either an issue when flashing or a problem with the firmware you have used.
I would advise using Smart Switch on your computer to force another update instead of using ODIN.
Type *#06# and make a note of your serial number then turn off the device.
Open Smart Switch on your PC (Download Here if you don't have it) then in smart switch press MORE then select 'Emergency Software Recivery and Initialization'
Put the phone into Download Mode and connect to PC and wait for drivers to install (you may get a message saying it is incompatible, ignore it).
Click on the Device Initialization tab.
Enter your device model 'SM-G935F' and press OK. Then type in your devices Serial then press OK.
Now follow all steps until device is flashed. This could fix the issue.

Cant update OTA, hardware Chinese/Hongkong with software US?

Hi,
My S8 is second hand, there is something wrong, i noticed it first when i try to update and it said its the latest version while actually not (attached file). Then i try to check the software and i found out the the rom and baseband somehow mismatch, one from USA and one from Hongkong. I dont really understand how to interpret the information below which the PDA, CSC, or modem. Can someone help me what is really happen and what should i do to make it normal and can do OTA update?
in AIDA64/Android
Baseband: G950USQU1AQGL
Bootloader: G950USQU1AQGL (sammobile link: https://www.sammobile.com/firmwares/search/G950USQU1AQGL/)
Build ID: NRD90M.G9500ZHU1AQG6 (sammobile link: https://www.sammobile.com/firmwares/galaxy-s8/SM-G9500/TGY/)
in AIDA64/System
model: SM-G9500
Device: dreamqltechn
Product: dreamqltezh

TeranG__ said:
Hi,
My S8 is second hand, there is something wrong, i noticed it first when i try to update and it said its the latest version while actually not (attached file). Then i try to check the software and i found out the the rom and baseband somehow mismatch, one from USA and one from Hongkong. I dont really understand how to interpret the information below which the PDA, CSC, or modem. Can someone help me what is really happen and what should i do to make it normal and can do OTA update?
in AIDA64/Android
Baseband: G950USQU1AQGL
Bootloader: G950USQU1AQGL (sammobile link: https://www.sammobile.com/firmwares/search/G950USQU1AQGL/)
Build ID: NRD90M.G9500ZHU1AQG6 (sammobile link: https://www.sammobile.com/firmwares/galaxy-s8/SM-G9500/TGY/)
in AIDA64/System
model: SM-G9500
Device: dreamqltechn
Product: dreamqltezh
Click to expand...
Click to collapse
You can go to download mode to check your exact hardware model. The things in download mode can't be changed and are telling you the truth.
To go to download mode, power off your device completely and then press volume up + bixby + power button. it will ask you if you really want to continue, press yes and then look what it say by "Model Name". If you're at it already, also check the "warranty void" if its 0 or 1 (0x0 or 0x1).
To exit Donwload mode just press volume down + power button for 7 seconds.
You then can download the newest software for which ever device you have.

@jaannnis
Thank you! So in download mode, i found no phone model, instead i found carrier:xaa also the waranty void is 0x0 (no rooted). I google a little bit and found that is the USA unlocked. Also i just realised the back of my phone written model SM-G950U1. I think my hardware is USA unlocked but the firmware is hongkong (is hongkong better than usa unlocked??)
So what do you think i should? the safest way please. i have no waranty, i bought it online shop and the shop is closed.
should i flash usa unlocked firmware with odin? https://www.sammobile.com/firmwares/galaxy-s8/SM-G950U1/XAA/download/G950U1UEU2CRB9/214007/
or hongkong? or with smart switch?
Edit update:
1. so i tried smart switch 4.1.17054_16 with device initialization, with various combination (correct uncorrect model, correct uncorrect S/N).
- With wrong sn and anything samsung model the pop up is "unable to find the serial number, model name, or IMEI on the server. Please check and try again"
- correct sn and anything samsung model except SM-G950U1, the pop up is "please check the model name and S/N, and enter them again"
- correct sn and SM-G950U1 the pop up is, " 'SM-G950U1' does not support initializing. Please contact our service center."
2. Odin 3.12.3 with SM-G950U1, 2017 december nougat. The installation failed.
hope it helps to overcome my problems. thx