Hi, I had Wifi Problems on my LG L70
I downloaded an app that makes my sd card be the main storage, because there was nothing in the settings that makes your sd card be the main storage(internal storage) The name of The app is Int-SdCard write fix When i finished downloaded the app and opened it. there was a fix me and download button at the bottom of the fix me button. it needed root so i rooted my phone, after that when i pressed download button, there was a box that says Downloading and nothing happend.. i press the Fix me button but nothing happend.. Everything was fine Wifi was working and everything else.
So i thought of restarting my phone so the fix would work. But when i restarted it and i turned on Wifi it says Error
I tried Bluetooth still it Freeze All the things that needed connection is all broken. Is there a way to fix this?
I saw some troubleshoots and tried them.
I tried hard reset but no work. Also i checked "about phone" in settings. all i saw In the hardware Information and Software was "Unavailable"
I cant even root my phone anymore due to this, and i dont want it in the repair shop because too expensive, and takes months to fix it.
Phone Number: Unknown
IMEI: Unknown.
IMEI SV: Unknown
Wi-Fi Mac address: Unavailable
Bluetooth address: Unknown
Model number: LG-D370
Android Version: 4.4.2
Baseband Version: Unknown
Kernel Version: 3.4.0+
Build Number: KOT49I.A1408025071
Software Version: V10c-ESA-XX
Related
I really need help to repair the IMEI on this phone. *#06# shows /07
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM9
Selected model: SGH-I337M
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM14
Mode: Normal
Phone model: SGH-I337M
Firmware compiled date: Mar 28 2013
Firmware compiled time: 09:00:00
Firmware released date: Apr 23 2013
Firmware released time: 01:27:53
Incorrect IMEI
SW version: M9615A-CEFWTAZM-4.0.17062
----------------------------------------------------------------------------------
I try to do an IMEI repair and it always gets stuck at this part
Platform: Samsung Android
Selected port: COM14
Selected model: SGH-I337M
Detected phone model: SGH-I337M
Firmware compiled date: Tue Apr 23 00:17:11 KST 2013
PDA version: I337MVLUAMDJ
CSC version: I337MOYAAMDJ
SW version: I337MVLUAMDJ
Phone IMEI: Unknown
Phone SN: RF1D478W82J
Android version: 4.2.2 (JDQ39)
Cheking Root
Phone is Rooted
Reading security backup, please wait...
Backup saved as C:\Program Files (x86)\Octoplus\Octoplus_Samsung
\BACKUP\Security-SGH-I337M-22-06-2014_19-04-04-.asec file
Deactivating MSL...
MSL deactivate successfully
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Wait 1-2 minutes.
3. Connect phone via UART cable to Box.
Connecting to phone, please wait...
Just sits there for ages - any ideas? I'm using the Octoplus Box btw. I have requested help from the Octoplus team but they are slow to answer and I need to get this phone fixed for a customer.
Thanks!
http://www.technobezz.com/fix-invalid-imei-samsung-galaxy-s4/
try this.
Got the IMEI fixed but the screen goes black now when I try to make a call. Any ideas of how to fix? I was thinking about tying to flash the phone with Odin again with the same 4.2.2 stock rom. The microphone also doesn't work during the call.
ixoye777 said:
Got the IMEI fixed but the screen goes black now when I try to make a call. Any ideas of how to fix? I was thinking about tying to flash the phone with Odin again with the same 4.2.2 stock rom. The microphone also doesn't work during the call.
Click to expand...
Click to collapse
Dial *#1234# and attach what appears.
I recently tried to update my Nexus 10 to lollipop and ran into a problem. I was able to download and begin the installation but then all i got was the android on its back with a red exclamation point above the chest. Info on the tablet is as follows:
Product Name: Manta
Variant: wifi
H/W Version: 8
Bootloader Version: Mantamf01
Lock State: Unlocked
Reboot Mode Flag: Recovery
When I start it in recovery mode it says "Downloading Do not turn off Target"
I have tried speaking with Google with no help and Samsung customer support has been beyond useless.
I am not really sure what to do to fix it. I was hoping someone here may have run into this issue in the past. If you need any more information from me, I will do my best to supply it.
Thanks
You might want to consider one of the tool kits, like Wug's (http://forum.xda-developers.com/showthread.php?t=2015467). I know some frown on such applications but when I ran into problems upgrading to 5.0.1, it was able to get me where I wanted to be (although I do not remember having this problem; mine was more getting my computer and my tablet to "talk" in order to update the bootloaders).
kmenard said:
I recently tried to update my Nexus 10 to lollipop and ran into a problem. I was able to download and begin the installation but then all i got was the android on its back with a red exclamation point above the chest. Info on the tablet is as follows:
Product Name: Manta
Variant: wifi
H/W Version: 8
Bootloader Version: Mantamf01
Lock State: Unlocked
Reboot Mode Flag: Recovery
When I start it in recovery mode it says "Downloading Do not turn off Target"
I have tried speaking with Google with no help and Samsung customer support has been beyond useless.
I am not really sure what to do to fix it. I was hoping someone here may have run into this issue in the past. If you need any more information from me, I will do my best to supply it.
Thanks
Click to expand...
Click to collapse
kmenard said:
I recently tried to update my Nexus 10 to lollipop and ran into a problem. I was able to download and begin the installation but then all i got was the android on its back with a red exclamation point above the chest. Info on the tablet is as follows:
Product Name: Manta
Variant: wifi
H/W Version: 8
Bootloader Version: Mantamf01
Lock State: Unlocked
Reboot Mode Flag: Recovery
When I start it in recovery mode it says "Downloading Do not turn off Target"
I have tried speaking with Google with no help and Samsung customer support has been beyond useless.
I am not really sure what to do to fix it. I was hoping someone here may have run into this issue in the past. If you need any more information from me, I will do my best to supply it.
Thanks
Click to expand...
Click to collapse
Have you tried holding the power button in for 20 or 30 seconds and booting normally, on a fully charged device? If not, and if you're looking at a completely unusable device and google/samsung aren't helping then perhaps it's worth following the steps to flash a new image from google's site.
https://developers.google.com/android/nexus/images
You want to follow the instructions for 5.0.1 (LRX22C)
You will lose all data on the device.
I have a Galaxy S4 GT-I9505 that I purchased online. It turns out that the Android firmware (4.4.2) does not match the phone's CSC code. I have been trying to flash a stock ROM for Android 5.0.1 that *does* match the phone's CSC code, but Mobile Odin won't proceed. My phone is properly rooted, and Mobile Odin starts correctly, but when I try to open the tar.MD5 file, it says "Partition could not be found in file." It did let me wipe the phone, and the phone properly booted up again in 4.4.2. What can I do to make this work?
Would it help to flash an Android 4.4.2 that matches the phone's CSC? Is there something else I can try? I'm fairly new at this kind of hacking, but I'm learning quickly! Here are my phone's details:
Android version: 4.4.2
Product Code: GT-I9505ZKAXSG
Original CSC Code: XSG
Firmware CSC: XSG
PDA Version: I9505XXUGNG2
Bootloader Version: I9505XXUGNG2
Baseband: I9505XXUGNG2
CSC Version: I9505OJVFNF1
Kernel Version: 3.4.0-2091210 [email protected] #1 32-bit
Thanks for any help you can offer. Oh, also, just to make clear, I cannot connect this phone to a desktop with a USB cord -- I have tried every possible variety of driver install, and #$%&* Windows will not recognize the phone.
Let's verify your phone model. Enter download mode (power, volume down, and the home button) and read off the device's model number at the top left of the screen. As to the driver issue, you really want to get that resolved. Download the driver from here and install it.
If you do not want your phone to be bricked, I suggest you stay away from Mobile Odin.
Use FlashFire instead. Same principe, only newer.
phone info
Strephon Alkhalikoi said:
Let's verify your phone model. Enter download mode (power, volume down, and the home button) and read off the device's model number at the top left of the screen. As to the driver issue, you really want to get that resolved. Download the driver from --- and install it.
Click to expand...
Click to collapse
Thanks for your help. The phone model listed in download mode is GT-I9505.
I tried the driver that you linked to, but it didn't work--I suspect when my phone once fell off a table while plugged into the charger, the phone connection got damaged. I can charge the battery just fine, but connecting to a computer through the cord is no longer possible. However, I have been successfully transferring stock ROM files onto the phone with the Software Data Cable app.
Then replace the connector. That board is separate from the motherboard and shouldn't be too expensive.
So I got a lg k8 2017 m200 .Used for a while but yesterday i did a reset and now imei is gone. I have tried the following:
1)Unable to root it.
2)Found no custom rom or custom recovery.
3)EFS Pro said successfully IMEI written but upon restart its still null.
4)Tried qpst but mobile is unknown and keeps disconnecting.(I enabled port check test and usb debugging)
5)Flashed stock rom 3 Times.
6)Reset it 8 Times.
9)Also wasn't able to use diag port command due to lack of superuser in adb.
None of all worked so can anyone help please. Reset of functionality is good. So i also turned off my lg and press vol up and vol down along with power button and it displayed imei there.
"So i also turned off my lg and press vol up and vol down along with power button and it displayed imei there."
Wait, it displays the correct IMEI there?
You said your IMEI is gone. but is it blank or its written "unknown" there? Or the IMEI is just wrong?
I had a problem with IMEI some years ago on a LG E610f and I fixed it by using LG tools back then. I still have the version 9.5 here and I doesnt support your phone, but Maybe the latest version supports your phone.
I have a Samsung S10+ (SM-G975F) that was flashed with stock Android 10 from Telstra (Australia).
However, I'm in the U.K.!
How do I fix this? The phone won't update OTA and I don't really want to root it.
How can I use heimdall to flash it on Linux? (No access to a Windows machine for Odin)
I downloaded a rom from Sammobile for Android 12 / United Kingdom O2 (which is the network I'm on)
but it's a .zip file and Heimdall doesn't even look at it.
I can't adb sideload the .zip as the phone sits there for ages and does nothing.
If I try to load the .zip from sdcard the phone does nothing with it and powers down.
Any ideas?
One UI version: 2.5
Android Version: 10
Build Number: QP1A.190711.020.G975FXXS9DTI8
Service Provider SW ver.
SAOMC_SM-975F_OXM_TEL_QQ_0017
R58MA1EK76E
TEL/TEL/TEL
I tried to change the CSC using *#272*<MY IMEI NUM>* but I just get "Unknown Application"
Well, I ended up bricking it. Tried flashing with Heimdall, it got halfway through .. when it hit system the USB shut down and refused to talk to the phone. Meanwhile, the phone had a message: "OEM lock" and wouldn't install the new system.
Now the phone won't even power on. Tried hard reset, recovery mode, safe mode.. nothing works. Just a blank screen. Battery was at full power too.