Database Users

Phone Blocked

Hi guys have problem.Just downloaded app from Applanet that change the default battery look and iv download it name of app was roughly (SGS Battery) dont remember rest of it.I have rooted 2.2 Froyo and after selected mode Phone booted and just left on black screen nothink else its vibrating second after second and see some sort of cursor and thats it.Tryed remove batt same think happen.So pls wat to do?

try re-flashing the PDA file in ODIN

Hi,
I have the same problem.. After installing that software (sgs battery mod) the phone, after reboot, has a black screen and vibrates.. The 3 buttons are blocked.. May I try something or have I to take it to assistance (sorry for my english..)?
Many thanks for your help!!
Daniela

sizzlers said:
Hi guys have problem.Just downloaded app from Applanet that change the default battery look and iv download it name of app was roughly (SGS Battery) dont remember rest of it.I have rooted 2.2 Froyo and after selected mode Phone booted and just left on black screen nothink else its vibrating second after second and see some sort of cursor and thats it.Tryed remove batt same think happen.So pls wat to do?
Click to expand...
Click to collapse
Argh, pressed thanks instead of quote
PIRACY IS NOT TOLERATED.
Please stay clear of Applanet. The developer of SGS Battery will not be too happy if he see's this thread as you are pirating his good work.

Reflash stock rom and have all options ticked in odin use 512 pit, please pay for apps to support the developer ..

ye but can anyone post this ODIn flash think i cant find it.I could really use some help on flashin this cause its kinda new to me with this rom/reflash thinks.Post me video or any post here pls .

Go to samfirmware.com register and download odin and fw from there and,they have a guide too

Reply to TheBritScott

Hi TheBritScott... i dont know why i can't post reply to your thread in "galaxy s2 android development", so i start a thread here, hope u can read it.
Hi,
Originally my phone was from the UK Carphone Warehouse (CPW)
I have upgraded it from 2.2 to 2.3 etc...
The last time I did a firmware upgrade to ICS was a few months back and I didn't have any problem doing it.
After the upgrade, I had a few bugs. I used this file - GT-I9100_XEO_I9100XXLPW_I9100OXALPW_I9100XXLPW.tar and the main bugs I have are - The screen won't lock and when I press the Power Button, it will turn the screen off but when I hold it for 1 second the phone closes down.
So today I thought, lets see if I can change my firmware to a CPW version, so I downloaded GT-I9100_XEU_I9100XWLP7_I9100XXLPS_I9100XEULP5.tar and installed that. It went through the usual stuff and upon restarting I was getting an "android.core" crash. The screen stops working and after several reboots nothing change. I also booted up and cleared the cache, and this didn't do anything either.
I have just reverted back to the first ICS upgrade but still has not screen lock or when I press the power button for 1 second it closes down.
I wondered if anyone else has had these problems or could recommend to me what may fix it.
I appreciate all help
Thanks
TBS
Click to expand...
Click to collapse
So I think your problem is something wrong with your EFS folder.
1st, you must root your phone, then open market and search for this program "GSII_Repair"(Thanks HELROZ), install it, then open the program after installed>Go to "Repair GSII" tab>Follow those steps (1-2-3)>reboot phone if app need>done
And remember flash ROM without .PIT file and REPARTITION ticked...
Wish u can fix the problem, I had the same problem and Fixed it with this method...

I think you need to have minimum 10 posts before you can post in development sections.

Thanks!!!
atulalvenkar said:
I think you need to have minimum 10 posts before you can post in development sections.
Click to expand...
Click to collapse
Thank you... i'll try to reach 10 post

Reach ten post and then log out and then log back in
Thanks would be nice
Sent from my GT-I9100

Please lock this thread MOD
Sent from my GT-I9100

[Q] Jelly bean OTA4 problem

hello. i flashed stock rom via odin. rooted phone, flashed cwm, jbv3, ota1,ota2,ota3,ota4,clock to right. but after i flashed ota 4 i have a problem on clock. more exactly at Alarm. when i set to ON an alarm the screen freeze for 1-2 sec and i get force close clock error. am i the only one haveing this problem since i haven't seen any other posts about this. if is it just me tell me what i did wrong or how can i fix this please.
and one more question. is is worth to use merruk kernel since i want more BATTERY saving ? is this kernel going to use more battery or not ?
thanks in advance

I have just set the Alarm, didn't cause any problem..Let's see what others say..
For Good Battery Saving you should use Kuro Kernel which comes by default with JellyBlast v3..Merruk Kernel can overclock Galaxy Y to 1.2 GHz, but it drains the battery too.. Good Luck

weird. i tried reinstalling again and again from the begining. i will tell you exact steps i'm making maybe i make something wrong.
1.i flash stock rom via odin ( DDLA1, i don't know if this is the best one but i have a problem with my signal and calls quality if i use other stock roms (don't know if this is the reason or is just my phone) maybe you can help me resolve this too)
2. i reset phone to factory settings
3. i copy root and cwm archives to sd-card
4. i flash root via stock recovery
5. boot phone and check if it's rooted
6. flash cwm, wipe data/cache/davlik cache
7. flash through cwm JBV3, boot phone, flash through CWM OTA1, boot phone, flash through CWM OTA2, boot phone, and so on for OTA3 and OTA 4.1(revised) then flash through CWM also clocktoright archive
8. so now. on boot i get an error for jelly bean search (i know how to resolve this - uninstalling it) and i still receive force close on clock when i try to turn on an alarm.
any help ? what am i doing wrong ? maybe my stock rom isn't good ? but read at step1 about my problem with calls quality and signal and tell me if the stock rom has anything to do with it or not.
thanks again ^^

JellyBean Search Force Closes at boot, that's not a problem at all Happens with everybody..The Alarm Bug is the problem...Did you flash the correct Stock ROM using Sir Doky73's tutorial...Wait for the answers too

well.that's the "thing". i didn't install any rom from Doky's post. i downloaded one from the web which contains all packages for odin (pit,boot,pda,phone and csc) and it's DDLA1 firmware. should i try with one of Doky's firmwares ? which one? because there are many of european multilingual packs ( i'm from romania)
EDIT : should i use this CSC which includes carrier setup for my country (romania) -> CSC Only: OXF CSC for XXLE1 (S5360) and the other files from S5360_XXLE1_OXXLE1_XXLE1 as it says in his post ?

Maybe what you are saying is correct!
Strongly Advice you to PM any senoir dev like DeathNotice01, Ronnieryan, or Sir Doky himself
I didn't tried flashing Stock ROM ever..So I don't quite know about it
Whatever you do, first ask a Dev for his advice Good Luck!

thanks...can you tell me what baseband version do you have ?

I experience the alarm clock bug too. But i don't see it as much of a problem because even though it force closes it still sets up an alarm. I was even able to wake up to it this morning.

yaur7_cs said:
hello. i flashed stock rom via odin. rooted phone, flashed cwm, jbv3, ota1,ota2,ota3,ota4,clock to right. but after i flashed ota 4 i have a problem on clock. more exactly at Alarm. when i set to ON an alarm the screen freeze for 1-2 sec and i get force close clock error. am i the only one haveing this problem since i haven't seen any other posts about this. if is it just me tell me what i did wrong or how can i fix this please.
and one more question. is is worth to use merruk kernel since i want more BATTERY saving ? is this kernel going to use more battery or not ?
thanks in advance
Click to expand...
Click to collapse
Yes bro i was too having this problem...i fixed it by pasting clock app of ota4 on system/files....

hmm, i think the clock need fix, but the alarm still work
sorry bad english

I too am facing fc in alarmclock .No need to worry it`s an error .Hope avijit will fix it next time.

Yes, faced the alarm bug. But able to set up the alarm, so not much of a worry! Hope the developer will fix it soon.

Clock bug resolved
yaur7_cs said:
hello. i flashed stock rom via odin. rooted phone, flashed cwm, jbv3, ota1,ota2,ota3,ota4,clock to right. but after i flashed ota 4 i have a problem on clock. more exactly at Alarm. when i set to ON an alarm the screen freeze for 1-2 sec and i get force close clock error. am i the only one haveing this problem since i haven't seen any other posts about this. if is it just me tell me what i did wrong or how can i fix this please.
and one more question. is is worth to use merruk kernel since i want more BATTERY saving ? is this kernel going to use more battery or not ?
thanks in advance
Click to expand...
Click to collapse
just copy clock.apk from OTA3 update and install using system app replacer ... thats it .. i m having same problem but now resolved by this method. one con is that clock have old look as that of gingerbread style instead of ICS.. enjoy..:good:

No need to worry Nemesis will be relesed soon.

keypad
plz change the landscape typing as like sony in which we see what screen is instead we have other screen
means as like potrait background keep the landscape background.

More Wifi Issues.

No I'm sure we're all aware that there are quite a few issues with Wifi not working on S4 with certain ROMs/Kernels/Modems etc etc.
Now I've tried so many ROMs stock & custom, loads of different Modems, an assortment of Kernels and many tricks/hacks to try and get it working but nothing.... absolutely nothing.
I'm currently on ParanoidAndroid 3.99-RC2 27/12/13. Wifi obviously won't switch on, it can't seem to even find the MAC address even though the file is there to be read from and I can view it as a text document. Even more strange is that under the '/Data/misc/wifi/' folder, all that is in there is one file called 'softap.conf' and a folder called 'sockets'. Now I haven't actually deleted the 'wpa_supplicants.conf' file, it was just never created, along with the rest of the contents for that folder. Unless what I read about Symlinks the other day meant that the actual working folder has changed recently.
But list of things I have tried:
Deleting .cid.info file
Deleting wpa_supplicant.conf file
Editing build proper 'Ro.secure.storage=false' attribute
Doing the SQlite trick
Pulling the battery whilst it's on
Using programs like Wifi Fixer - they just tell me my wifi is stuck
Using *#0011# to turn off power saving
Selecting the Wifi Region Code
Unticking Wifi Optimisation
Changing Wifi during sleep action
Using *#*#4696#*#*, It states "Configured Networks: Disabled", "Wifi State: Disabled" and "Supplicant Sate: UNITIALIZED"
More testing:
Different Modems
Different Kernels
Different ROMs
Different Wifi-Fixes
Any help on the matter would be greatly appreciated or any addition tricks to try that may help.

Dial *#1234# and make us a screenshot pls :good:

Unfortunately that code doesn't seem to work on this ROM, I did also try *#*#1234#*#*, what information is it that you're after?

Pulse654321 said:
Unfortunately that code doesn't seem to work on this ROM, I did also try *#*#1234#*#*, what information is it that you're after?
Click to expand...
Click to collapse
Dial *#12580*369# to check software and hardware information.

Equally didn't work, take it, it's one of the codes that only work on Stock or TW based ROMs?

Pulse654321 said:
Equally didn't work, take it, it's one of the codes that only work on Stock or TW based ROMs?
Click to expand...
Click to collapse
Pls read the rules of XDA. You have a custom ROM, ask in correct thread. Ty and good day

I stated that I was on a custom ROM in my opening post... Equally I stated that it didn't matter what ROM I used it didn't work on any of them, from complete stock ROMs to AOSP and Google.
Flashing stock ROM now so that I can test those codes.

Pulse654321 said:
I stated that I was on a custom ROM in my opening post... Equally I stated that it didn't matter what ROM I used it didn't work on any of them, from complete stock ROMs to AOSP and Google.
Flashing stock ROM now so that I can test those codes.
Click to expand...
Click to collapse
Sorry for my words if they made u feel bad. You must understand that the custom ROMS have own thread and we can't try all of them and solve the fails/problems/troubles that can appears. It's nothing personal :highfive:

Joku1981 said:
Dial *#12580*369# to check software and hardware information.
Click to expand...
Click to collapse
Here's the screenshot. Some codes like 526 and 528 which I've been told reloads the Wifi drivers doesn't seem to work at all which is a bit of a shame.

Pulse654321 said:
Here's the screenshot. Some codes like 526 and 528 which I've been told reloads the Wifi drivers doesn't seem to work at all which is a bit of a shame.
Click to expand...
Click to collapse
1- Turn off ur phone. Go to DOWNLOAD MODE and Flash THIS (unrar it before) in Odin as PHONE/CP!!
2- When u finish the process ur phone will reboot
3- Try if u have WIFI. If not make a factory reset:
- Make a Internal Memory backup
- From your home screen press the apps icon in the lower right corner.
- Find and press the settings icon.
- In the upper end of the screen press the accounts tab.
- In the bottom of the next screen press the Backup and reset button.
- Press the factory data reset.
- Read the info on your cell phone screen and hit Reset device.

Unfortunately after going back to the stock ROM, I have tried both, I did the Wifi-Fix again, just to humour myself, but it didn't work. Though since going back to Stock ROM it is able to find the MAC address, which it wasn't doing on AOSP ROMs. Short of rooting the device again and fiddling with files I don't know what else I can try on completely Stock to make it work

Pulse654321 said:
Unfortunately after going back to the stock ROM, I have tried both, I did the Wifi-Fix again, just to humour myself, but it didn't work. Though since going back to Stock ROM it is able to find the MAC address, which it wasn't doing on AOSP ROMs. Short of rooting the device again and fiddling with files I don't know what else I can try on completely Stock to make it work
Click to expand...
Click to collapse
- And factory reset?
- Conect it to Kies 3 and make me a screenshot pls

Ok, for about the first time ever Kies, has actually picked it up, says there is also an update available now. What would you like the Screenshot of? Or should I just go ahead with the update and hope for the best?
Edit:
Sorry, yes I did the Factory Reset earlier as a lot of people have said that solved the issue.

Pulse654321 said:
Ok, for about the first time ever Kies, has actually picked it up, says there is also an update available now. What would you like the Screenshot of? Or should I just go ahead with the update and hope for the best?
Edit:
Sorry, yes I did the Factory Reset earlier as a lot of people have said that solved the issue.
Click to expand...
Click to collapse
The screenshot was exactly for that. I think the new update will solve ur problems. Update ur phone relaxed with Kies3. Anyway write here again if something go wrong

Okay, cheers for the help so far. Shame I didn't think of Kies before, use to be the worse software known to man. Just going to take about an hr to download the the update due to Samsung's pants servers.

Pulse654321 said:
Okay, cheers for the help so far. Shame I didn't think of Kies before, use to be the worse software known to man. Just going to take about an hr to download the the update due to Samsung's pants servers.
Click to expand...
Click to collapse
Hahahah. Yes it is slower than a turtle but safe. You have now all correct: firmware, modem and CSC (MJ5). Kies 3 will get it as an official UPDATE. We hope all go ok . Take your time sir and enjoy the rest of the day :highfive:

Well after waiting over an hour for it to finish it's updated and everything seems to have gone fine. The only issues is that Wifi still doesn't work.

Pulse654321 said:
Well after waiting over an hour for it to finish it's updated and everything seems to have gone fine. The only issues is that Wifi still doesn't work.
Click to expand...
Click to collapse
It start to be funny . Ok sir. Dial *#1234# and make a screenshot pls

Joku1981 said:
It start to be funny . Ok sir. Dial *#1234# and make a screenshot pls
Click to expand...
Click to collapse
Here it is.

Pulse654321 said:
Here it is.
Click to expand...
Click to collapse
What happend when try to conect wifi? Explain me with more details pls

Back function U-touch button stopped working after CyanogenMod update

Last night my Zuk prompted a CyanogenMod update , which I installed. Now, the back function of the home button (by just touching it, not pressing) doesn't work anymore. Any ideas on how to fix this ?

Same here, no solution found ATM :/

I-Immortal said:
Same here, no solution found ATM :/
Click to expand...
Click to collapse
You guys should report all bugs to the cyanogenOS forum here -> http://community.cyngn.com/c/devices/z1
If they don´t know about the bugs, they can´t fix it.
And while you are at it raise your voice here (because we need inbuild root ) -> http://community.cyngn.com/t/reques...ring-and-inbuilt-superuser-access/97/4?u=othe

Wow nice thank you ! I didn't know where the official support was ^^

U touch buttons not funtioning
Pontifex007 said:
Last night my Zuk prompted a CyanogenMod update , which I installed. Now, the back function of the home button (by just touching it, not pressing) doesn't work anymore. Any ideas on how to fix this ?
Click to expand...
Click to collapse
Any idea will factory resetting get the u touch buttons to work? Or are u waiting for an update?

Sydarij said:
Any idea will factory resetting get the u touch buttons to work? Or are u waiting for an update?
Click to expand...
Click to collapse
I dont think resetting will help. I'm just waiting till the next update, or the big update to 6.0 Marshmallow early next year. Really weird that they haven't fixed it yet, shouldnt be that difficult..

They dummied it out on the fingerprint_client and kernel binary... I've been tracking this issue down all day already. Theoretically, swapping the zImage for an older one, along with an older fingerprint_client binary should fix the issue.
Edit: Got it running on the latest COS again after a few patches here and there... will post a flashable boot.img soon.
Edit2: Here you go, all patched up and ready to go. Just flash it via fastboot and you will get your back-button functionality back. https://www.androidfilehost.com/?fid=24269982087008212

MrColdbird said:
They dummied it out on the fingerprint_client and kernel binary... I've been tracking this issue down all day already. Theoretically, swapping the zImage for an older one, along with an older fingerprint_client binary should fix the issue.
Edit: Got it running on the latest COS again after a few patches here and there... will post a flashable boot.img soon.
Edit2: Here you go, all patched up and ready to go. Just flash it via fastboot and you will get your back-button functionality back.
Click to expand...
Click to collapse
Thanks! Do you know if this will work with CyanogenMod? Not CyanogenOS

Gabriü said:
Thanks! Do you know if this will work with CyanogenMod? Not CyanogenOS
Click to expand...
Click to collapse
should we wait for an update? there's not one issue im facing with the zuk z1. there are many like:
-the back button on the home key soft touch is not working
-the capacitive touch button on the left is much brighter than the right one hence not equal
-the swipe right or left to switch b/w apps on the home key is not working

Sydarij said:
should we wait for an update? there's not one issue im facing with the zuk z1. there are many like:
-the back button on the home key soft touch is not working
-the capacitive touch button on the left is much brighter than the right one hence not equal
-the swipe right or left to switch b/w apps on the home key is not working
Click to expand...
Click to collapse
I don't know, I personally believe that they removed the feature on purpose because I was able to use it when I first bought the phone..

U touch soft touch button not working
Gabriü said:
I don't know, I personally believe that they removed the feature on purpose because I was able to use it when I first bought the phone..
Click to expand...
Click to collapse
they have removed it... im still waiting for an update. pretty frustrated they removed it so early when i just bought it a week ago! Arghhh!

Just use the boot image I've posted to temporarily restore it.
The OnePlus 2 kernel sources contain a patched fingerprint driver that is compatible with the Z1 that contains the capacitive navigation that got stripped.
It's already being picked up / ported for the Chroma kernel so don't worry guys, on the long run we will get this feature back permanently (no matter what Cyanogen wants).

MrColdbird said:
Just use the boot image I've posted to temporarily restore it.
The OnePlus 2 kernel sources contain a patched fingerprint driver that is compatible with the Z1 that contains the capacitive navigation that got stripped.
It's already being picked up / ported for the Chroma kernel so don't worry guys, on the long run we will get this feature back permanently (no matter what Cyanogen wants).
Click to expand...
Click to collapse
I can't answer on the official thread as I don't have more than 10 posts, anyway, thanks for the feature, I tested it on CM12.1-Nightly and it works like a charm! Unfornately i noticed that after flashing the zip, on "buttons" settings, the "enable on screen nav bar" option has disappeared, and I can't go turn them off. Also the functionality is not the same as when i bought it, in fact if I touched the button, it would use the back feature instead of going on the home screen.
Anyway, thanks again!

You can adjust the actions that occur by editing the Generic.kl file included with the installer zip file. Adjust them as needed / wanted.

Hi , thx alot for ur patch .
Got some questions :
1. How can i programm button myself ?
2. How can i uninstall that patch ?

MrColdbird
thank you very much. finger prints sensor works as back button again. great job.
---------- Post added at 09:25 PM ---------- Previous post was at 09:21 PM ----------
Gonzaman said:
Hi , thx alot for ur patch .
Got some questions :
1. How can i programm button myself ?
2. How can i uninstall that patch ?
Click to expand...
Click to collapse
You can use 3rd party programs from playstore. for example"flashify". save the patch to internal store by usb. install flashify. find the path of yog4pas3oh....img and set up. after reboot it will work. Also you can unistall it from setting/ applications

sadrettin said:
MrColdbird
thank you very much. finger prints sensor works as back button again. great job.
---------- Post added at 09:25 PM ---------- Previous post was at 09:21 PM ----------
You can use 3rd party programs from playstore. for example"flashify". save the patch to internal store by usb. install flashify. find the path of yog4pas3oh....img and set up. after reboot it will work. Also you can unistall it from setting/ applications
Click to expand...
Click to collapse
install it on your zuk and try to uninstall it by your ways .

zuk z1 home button issue
please can u help me to flash my device. im doing it for the first time.. i have installed flashify from playstore.. now can u tell me what to do step by step. thanks!

Sydarij said:
please can u help me to flash my device. im doing it for the first time.. i have installed flashify from playstore.. now can u tell me what to do step by step. thanks!
Click to expand...
Click to collapse
Hi,
1- plug your usb cable to your pc.
2- download the file "YOG4PAS3OH_backbuttonenabled_boot.img" which uploaded by MrColdbird.
3- copy the file to zuk z1s internal store.
4- open flashify. choose "recovery image", choose file manager, find and choose the "YOG4PAS3OH_backbuttonenabled_boot.img"
5-program asks you flash recovery? and choose YUP.
6- after rebooting your touch backbutton will work with permission of God.
But I offer another upload of Mrcoldbird. Because extra properties come by it.
" Left swipe: Back
Right swipe: Recent Apps
Tap: Home"
http://forum.xda-developers.com/zuk...rint-touch-t3262388/post64128662#post64128662

sadrettin said:
Hi,
1- plug your usb cable to your pc.
2- download the file "YOG4PAS3OH_backbuttonenabled_boot.img" which uploaded by MrColdbird.
3- copy the file to zuk z1s internal store.
4- open flashify. choose "recovery image", choose file manager, find and choose the "YOG4PAS3OH_backbuttonenabled_boot.img"
5-program asks you flash recovery? and choose YUP.
6- after rebooting your touch backbutton will work with permission of God.
But I offer another upload of Mrcoldbird. Because extra properties come by it.
" Left swipe: Back
Right swipe: Recent Apps
Tap: Home"
http://forum.xda-developers.com/zuk...rint-touch-t3262388/post64128662#post64128662
Click to expand...
Click to collapse
Flashify keeps crashing on my Zuk.. weird !