Reply to TheBritScott - Galaxy S II General

Hi TheBritScott... i dont know why i can't post reply to your thread in "galaxy s2 android development", so i start a thread here, hope u can read it.
Hi,
Originally my phone was from the UK Carphone Warehouse (CPW)
I have upgraded it from 2.2 to 2.3 etc...
The last time I did a firmware upgrade to ICS was a few months back and I didn't have any problem doing it.
After the upgrade, I had a few bugs. I used this file - GT-I9100_XEO_I9100XXLPW_I9100OXALPW_I9100XXLPW.tar and the main bugs I have are - The screen won't lock and when I press the Power Button, it will turn the screen off but when I hold it for 1 second the phone closes down.
So today I thought, lets see if I can change my firmware to a CPW version, so I downloaded GT-I9100_XEU_I9100XWLP7_I9100XXLPS_I9100XEULP5.tar and installed that. It went through the usual stuff and upon restarting I was getting an "android.core" crash. The screen stops working and after several reboots nothing change. I also booted up and cleared the cache, and this didn't do anything either.
I have just reverted back to the first ICS upgrade but still has not screen lock or when I press the power button for 1 second it closes down.
I wondered if anyone else has had these problems or could recommend to me what may fix it.
I appreciate all help
Thanks
TBS
Click to expand...
Click to collapse
So I think your problem is something wrong with your EFS folder.
1st, you must root your phone, then open market and search for this program "GSII_Repair"(Thanks HELROZ), install it, then open the program after installed>Go to "Repair GSII" tab>Follow those steps (1-2-3)>reboot phone if app need>done
And remember flash ROM without .PIT file and REPARTITION ticked...
Wish u can fix the problem, I had the same problem and Fixed it with this method...

I think you need to have minimum 10 posts before you can post in development sections.

Thanks!!!
atulalvenkar said:
I think you need to have minimum 10 posts before you can post in development sections.
Click to expand...
Click to collapse
Thank you... i'll try to reach 10 post

Reach ten post and then log out and then log back in
Thanks would be nice
Sent from my GT-I9100

Please lock this thread MOD
Sent from my GT-I9100

Related

Bell SGS wont use 3 button reboot

I have been trying all day to get this 3 button mode to work for my Bell samsung JH2. I have read that bell released a firmware update to fix it and i believe i have the correct version. Problem is ican never ever seem to get into the 3 button mode properly.. i holy volume up and Home and Power.....then when i see the "I9000 M" screen, i let go of power and keep holing home and volume up. it just boots like normal. What am i doing wrong?
I have same issues , but I got around by using the adb comands through the PC :
something like "adb reboot recovery"
jark99 said:
I have been trying all day to get this 3 button mode to work for my Bell samsung JH2. I have read that bell released a firmware update to fix it and i believe i have the correct version. Problem is ican never ever seem to get into the 3 button mode properly.. i holy volume up and Home and Power.....then when i see the "I9000 M" screen, i let go of power and keep holing home and volume up. it just boots like normal. What am i doing wrong?
Click to expand...
Click to collapse
When did you flash to JH2?
Jark...
Have you "reflashed" to JH2 by using the regedit trick you can find here in the forum? I had flashed to JH2 the day after I bought my phone and I still had the 3button problem but when the firmware was re-released and I followed the regedit trick it fixed the issue.
You will need to update your Kies as well. Just search the forums for the instructions on these items and you should be "good to go"...
Hope it works out for you!!!
yiannisthegreek said:
Jark...
Have you "reflashed" to JH2 by using the regedit trick you can find here in the forum? I had flashed to JH2 the day after I bought my phone and I still had the 3button problem but when the firmware was re-released and I followed the regedit trick it fixed the issue.
You will need to update your Kies as well. Just search the forums for the instructions on these items and you should be "good to go"...
Hope it works out for you!!!
Click to expand...
Click to collapse
i had flashed the day i bought the phone...aka last month or something. I found the reggedit fix. hmm interesting i shall try this just ater my kies is done updating. I will obviously loose my apps and stuff correct? what a shame.
jark99 said:
i had flashed the day i bought the phone...aka last month or something. I found the reggedit fix. hmm interesting i shall try this just ater my kies is done updating. I will obviously loose my apps and stuff correct? what a shame.
Click to expand...
Click to collapse
You definitely have to reflash JH2 using the registry trick described in the main topic. I had to do the same but the process is pretty straightforward and you shouldn't expect problems.
tarambuka said:
You definitely have to reflash JH2 using the registry trick described in the main topic. I had to do the same but the process is pretty straightforward and you shouldn't expect problems.
Click to expand...
Click to collapse
thanks the main reason i wanted to flash and get this button combo to workw as to upload my screenshot of my phone and try some custom roms. Enjoy previewing my homescreen in the "show your desktop" thread.
thanks for everyones help! finally rooted with the one click lag fix < havent installed the lag fix yet as things are fine. going to downloadmore apps. thanks for the reggedit hack! and heres a screenshot of my homescreen.
http://forum.xda-developers.com/showpost.php?p=8255572&postcount=548
Thread closed. Please search before posting questions such as this, the answers already exist in other threads.

[Q] sprint galaxy s tablet

hello everyone.... fairly new too here but i have post before back in my mugal days..
Ok im having a big problem with my tablet, after a factory wipe (reset), and after boot up i get the introductory screen but the keyboard wont pop up. I then i figure let me just skip this part.
Get to what supposed to be the home screen but i get nothing just a black screen, but i am able too see notification bar with time and battery status but below is just black. I try and wipe again (holding volume down and power button) thinking maybe something didnt install correctly, and sure enought still the same problem. vibrate once followed by two consecutive vibrates (error setup wizard failed start force close)
called sprint they couldn't help me. Now my question is do anyone have the stock sprint firmware in the form of a update.zip so i can put on sdcard and flash to see if that fixes problem or do i just have a brick?
1) Wrong forum
2) Download Roto JME v4 (It's on this forum)
3) Flash using Odin.
Sent from my BBC B using a V.21bis modem
acolwill said:
1) Wrong forum
2) Download Roto JME v4 (It's on this forum)
3) Flash using Odin.
Sent from my BBC B using a V.21bis modem
Click to expand...
Click to collapse
Sorry if i posted this in the wrong spot. ANY MODS CAN YOU MOVE THIS TO CORRECT FORUM.
Even tho i did read up on Roto JME v4 it say if for GSM version. I have sprint (CDMA) version.
where can i get the drivers when you put tab in download mode?
Review #1 above, search for it. Don't get others to do your work.
rangercaptain said:
Review #1 above, search for it. Don't get others to do your work.
Click to expand...
Click to collapse
I didn't ask anyone to do anything for me, even thought i found it my self anyways thanks for those who helped.

please help odin won't connect

I will try and explain as best as I can, please forgive me as I am a nexbie to thid flashing firmware, I flashed my galaxy s fron froyo 2.2 to the gingerbread stock 2.3 XXJVR from this site and everything went fine but wanted to use the MilkyS rom so downloaded everything and followed the instructions exactly but Odin just can't connect, Keis connects fine and odin finds the phone when it is switched on but when I put it in download mode there is something really wrong as I don't get the download screen that I originally had with the yellow triangle and the android man but now when I go into download mode I get a screen with blue writing at the tp saying reboot system now
apply update from SD card wipe data/factory reset
wipe cache partition
then I have yellow writing at the bottom of screen
copying media files
sucsessfully copied "manual mode"
applying Multi CSC....
Installing Multi-CSC.....
Applied the CSC - code "CPW"
Sucsessfully applied multi-CSC.
and if I leave it like that for too long the battery seems to smell like its melting or something, I have tried everything on another laptop running windows XP as well as windows 7 but no joy can anyone please help me with this issue, please explain in plain english and not to techy as I am a newbie and not much good at this stuff, thank you so much for any help, I am in the Uk..
So you post this problem in the "Development Section"? Why? Please please post this in the Q and A section and your question will be anwered.
Sent from my GT-I9000 using XDA Premium App
I sense OP Iron Fist soon approaching....
tanzi said:
I will try and explain as best as I can, please forgive me as I am a nexbie to thid flashing firmware, I flashed my galaxy s fron froyo 2.2 to the gingerbread stock 2.3 XXJVR from this site and everything went fine but wanted to use the MilkyS rom so downloaded everything and followed the instructions exactly but Odin just can't connect, Keis connects fine and odin finds the phone when it is switched on but when I put it in download mode there is something really wrong as I don't get the download screen that I originally had with the yellow triangle and the android man but now when I go into download mode I get a screen with blue writing at the tp saying reboot system now
apply update from SD card wipe data/factory reset
wipe cache partition
then I have yellow writing at the bottom of screen
copying media files
sucsessfully copied "manual mode"
applying Multi CSC....
Installing Multi-CSC.....
Applied the CSC - code "CPW"
Sucsessfully applied multi-CSC.
and if I leave it like that for too long the battery seems to smell like its melting or something, I have tried everything on another laptop running windows XP as well as windows 7 but no joy can anyone please help me with this issue, please explain in plain english and not to techy as I am a newbie and not much good at this stuff, thank you so much for any help, I am in the Uk..
Click to expand...
Click to collapse
Omg...you are going in recovery...*facepalm*
Post in the right damn section next time.
Sent from my GT-I9000 using XDA Premium App
tanzi said:
I will try and explain as best as I can, please forgive me as I am a nexbie to thid flashing firmware, I flashed my galaxy s fron froyo 2.2 to the gingerbread stock 2.3 XXJVR from this site and everything went fine but wanted to use the MilkyS rom so downloaded everything and followed the instructions exactly but Odin just can't connect, Keis connects fine and odin finds the phone when it is switched on but when I put it in download mode there is something really wrong as I don't get the download screen that I originally had with the yellow triangle and the android man but now when I go into download mode I get a screen with blue writing at the tp saying reboot system now
apply update from SD card wipe data/factory reset
wipe cache partition
then I have yellow writing at the bottom of screen
copying media files
sucsessfully copied "manual mode"
applying Multi CSC....
Installing Multi-CSC.....
Applied the CSC - code "CPW"
Sucsessfully applied multi-CSC.
and if I leave it like that for too long the battery seems to smell like its melting or something, I have tried everything on another laptop running windows XP as well as windows 7 but no joy can anyone please help me with this issue, please explain in plain english and not to techy as I am a newbie and not much good at this stuff, thank you so much for any help, I am in the Uk..
Click to expand...
Click to collapse
Since the others wont offer any help. (and yes, i understand this is the development section and not the Q&A).
Try a Factory Reset, restart your phone.
Hold Volume DOWN+"Home" button+Power UNTIL you get to the screen with the yellow triangle specifying it's in download mode.
xWarMachine04 said:
Since the others wont offer any help. (and yes, i understand this is the development section and not the Q&A).
Try a Factory Reset, restart your phone.
Hold Volume DOWN+"Home" button+Power UNTIL you get to the screen with the yellow triangle specifying it's in download mode.
Click to expand...
Click to collapse
Im sure he would have gotten help once it was moved to the Q&A section.....
Should someone really be asking this if they are flashing ROMs? Cant tell the difference between recovery and download? Everyone starts out as a noob, but come on
And i said i understand that, but leave the moderating job to the moderators. If someone is in need, you should help them first instead of telling them they need to be somewhere else and THEN ->inform<- them where they should be posting. There's nothing wrong with being informative and empathetic.
xWarMachine04 said:
Since the others wont offer any help. (and yes, i understand this is the development section and not the Q&A).
Try a Factory Reset, restart your phone.
Hold Volume DOWN+"Home" button+Power UNTIL you get to the screen with the yellow triangle specifying it's in download mode.
Click to expand...
Click to collapse
Thank you xWarMachine04 for your help and to everyone else I am very sorry for posting this in the wrong section, I will take my slap n the wrist and will put it in the right section, also just a " I am afraid that you have put this in the wrong section so would you mind moving it please" would have been nice, it was a genuine mistake and just for the record I am a she not a he..........................
No problem, wish you all the best
xWarMachine04 said:
And i said i understand that, but leave the moderating job to the moderators. If someone is in need, you should help them first instead of telling them they need to be somewhere else and THEN ->inform<- them where they should be posting. There's nothing wrong with being informative and empathetic.
Click to expand...
Click to collapse
True enough, I thought it more funny then anything hence my iron fist post
My problem is I lack empathy
xWarMachine04 said:
And i said i understand that, but leave the moderating job to the moderators. If someone is in need, you should help them first instead of telling them they need to be somewhere else and THEN ->inform<- them where they should be posting. There's nothing wrong with being informative and empathetic.
Click to expand...
Click to collapse
if everyone was thinking the same , this section would have been named "Galaxy S I9000 Android Development/Q&A"
why would you post here when you know its wrong.
faster response?
Like i said, let the mods do their jobs. IF a thread needs to be moved because of a person posting it in the wrong area, let them move it. This is a simple mistake a LOT of people make every day. Nonetheless, tanzi got her help needed, problem solved.
This conversation is over.
Is lagfix disabled?
Sent from my GT-I9000 using XDA Premium App
Thanks for all the help and advice but I have now managed to get Odin connected and have now flashed DarkysRom 9.5 Extreme, so thanks again..............

[N8013] HELP!!! Trying to go back to Stock

So I had flashed my n8013 to the Germany n8010 4.1.1 firmware using this:
http://forum.xda-developers.com/showthread.php?t=2048213
Then today I tried to restore back to UEALH2 n8013 stock:
http://forum.xda-developers.com/showthread.php?t=2100971
Now I've landed myself somewhere in limbo and I don't know if my battery will go soon or not. I have it plugged into the wall so maybe it'll pull a charge i have no clue. I'm stuck on the Android screen with the blue orb and the blue status bar stuck somewhere around 25%. At one point I had it stuck on the pulsing SAMSUNG screen in what it seems like doing nothing. I've tried getting into recovery to do a factory reset and cache clear and when I do that and hit restart it doesn't restart. I've tried flashing the UEALH2 files again and right now the Android is where I am.
Can anyone save my skin please!!!
Here is what you do
Go into recovery do a complete wipe
Download the rom from here http://www.hotfile.com/dl/178484761/092fdea/N8013UEALI3_N8013XARALI3_XAR.zip.html
and Flash it with Odin, should work fine
vypor87 said:
Now I've landed myself somewhere in limbo and I don't know if my battery will go soon or not. I have it plugged into the wall so maybe it'll pull a charge i have no clue. I'm stuck on the Android screen with the blue orb and the blue status bar stuck somewhere around 25%. At one point I had it stuck on the pulsing SAMSUNG screen in what it seems like doing nothing. I've tried getting into recovery to do a factory reset and cache clear and when I do that and hit restart it doesn't restart. I've tried flashing the UEALH2 files again and right now the Android is where I am.
Can anyone save my skin please!!!
Click to expand...
Click to collapse
Well if it's not doing anything leaving it stuck isn't going to help you. Unplug it and shut it off. Restart it in recovery by pressing power and volume up at the same time. Choose "wipe data/factory reset." That should get it back to a running state, probably the German ROM you were trying to replace. Someone posted a theoretic MD5 file of the whole new U.S. JB ROM. I haven't heard from anyone that's succefully installed it yet. I'd wait for the "all clear" before attempting to use it. In the meantime, assuming you're back on the German ROM after a reset, you're better off loading the U.S. ICS ROM via Odin and then use Kies to update to U.S. JB.
Check back in if the reset via recovery doesn't get your Note working again.
Can't reach stock recovery
Vol+ and Power only restarts it. It won't go into recovery. If i hold the power button it just restarts. I just need to get it charging and I don't know how. I don't have the german files on me at the moment.
vypor87 said:
Vol+ and Power only restarts it. It won't go into recovery. If i hold the power button it just restarts. I just need to get it charging and I don't know how. I don't have the german files on me at the moment.
Click to expand...
Click to collapse
Can you get in to download mode via "power/volume down?" If you can then just install the U.S ICS ROM to get back to a working device.
BarryH_GEG said:
Well if it's not doing anything leaving it stuck isn't going to help you. Unplug it and shut it off. Restart it in recovery by pressing power and volume up at the same time. Choose "wipe data/factory reset." That should get it back to a running state, probably the German ROM you were trying to replace. Someone posted a theoretic MD5 file of the whole new U.S. JB ROM. I haven't heard from anyone that's succefully installed it yet. I'd wait for the "all clear" before attempting to use it. In the meantime, assuming you're back on the German ROM after a reset, you're better off loading the U.S. ICS ROM via Odin and then use Kies to update to U.S. JB.
Check back in if the reset via recovery doesn't get your Note working again.
Click to expand...
Click to collapse
The first link was trying to use the US ICS Rom via Odin. My note won't get in a functional state either way
BarryH_GEG said:
Can you get in to download mode via "power/volume down?" If you can then just install the U.S ICS ROM to get back to a working device.
Click to expand...
Click to collapse
Barry, I used the preroot stock rom and the kernel as suggested in your OP on the other forum page. for some reason it's not working out well for me. I thought I had followed exactly what i should have
edit: sorry Barry I'm getting you confused with HG! in the other forum page.
vypor87 said:
Barry, I used the preroot stock rom and the kernel as suggested in your OP on the other forum page. for some reason it's not working out well for me. I thought I had followed exactly what i should have
Click to expand...
Click to collapse
That's swell. Can you get in to download mode?
BarryH_GEG said:
That's swell. Can you get in to download mode?
Click to expand...
Click to collapse
Yes I have it in download mode. I'm looking for the US Firmware link. Could you help me find it and link it? I've been scouring the general section for it.
vypor87 said:
Yes I have it in download mode. I'm looking for the US Firmware link. Could you help me find it and link it? I've been scouring the general section for it.
Click to expand...
Click to collapse
http://hotfile.com/dl/177432499/eb4...8013_XAR_1_20120918195236_k2xfp2k9el.zip.html
As long as you can get in to download mode you'll be fine. Just use Odin to get back to ICS and then Kies to update to JB. We can do a post-mortem to figure out what went wrong after you're off of Defcon 5. Nothing gets the heart rate up like potentially borking a $500 device.
vypor87 said:
Yes I have it in download mode. I'm looking for the US Firmware link. Could you help me find it and link it? I've been scouring the general section for it.
Click to expand...
Click to collapse
Here is the official md5 file for the XAR N8013 Note 10.1: http://www.sammobile.com/firmware/?page=3&model=GT-N8013&pcode=XAR&os=1&type=3#firmware
Hope this helps.
BarryH_GEG said:
http://hotfile.com/dl/177432499/eb4...8013_XAR_1_20120918195236_k2xfp2k9el.zip.html
As long as you can get in to download mode you'll be fine. Just use Odin to get back to ICS and then Kies to update to JB. We can do a post-mortem to figure out what went wrong after you're off of Defcon 5. Nothing gets the heart rate up like potentially borking a $500 device.
Click to expand...
Click to collapse
K, downloading right now. I actually spent the $9 to get a month subscription to hotfile to download faster. Not helping much as it's not my best bandwidth but i hope it works!!
Holy s*** it's aaaaa-live!!! It's alive it's alive!!! DEF-CON lowered now. I had another UEALH2 rooted tar on my machine and I cannot remember which forum page I downloaded it from sadly. I had downloaded it back in August on the 24th. It's dated the 22nd of August. The other tar I downloaded was dated the 22nd also but it was different somehow. The name scheme on this one is UEALH2_rooted_system.tar and it worked. Unlike UEALH2_prerooted.tar. That one almost screwed me up! I need to find where this original file came from. Either way I'm back on ICS and plugged into a wall. It's taking me through all the initial setup crap right now so it's hard to tell how low I got it but I started this night flashing with about 56% battery. And when you start with half a battery you start regretting things shortly after when you botch something up big time!
Edit: BTW at no point during the "brick" did my tablet ever lose charge. Infact it even gain charge! I guess these tablets can pull charge in download mode or something. Either way I'm glad it's not almost to zilch!
Spoke too soon. This is the one where the touchscreen stops working. FML... Still downloading the HotFile link of the image Barry sent.
vypor87 said:
Now I've landed myself somewhere in limbo and I don't know if my battery will go soon or not. I have it plugged into the wall so maybe it'll pull a charge i have no clue.
Click to expand...
Click to collapse
vypor87 said:
Edit: BTW at no point during the "brick" did my tablet ever lose charge. Infact it even gain charge! I guess these tablets can pull charge in download mode or something. Either way I'm glad it's not almost to zilch!
Click to expand...
Click to collapse
It gained charge because you had it plugged in, right? Sorry to here about your touchscreen :crying:. Hope All works out for you.
Edit:
Question for Barry: What is the difference between the hotfile link you provided and sammobile firmware?
RandomAwesomeGuy said:
It gained charge because you had it plugged in, right? Sorry to here about your touchscreen :crying:. Hope All works out for you.
Edit:
Question for Barry: What is the difference between the hotfile link you provided and sammobile firmware?
Click to expand...
Click to collapse
Well heres the worry about the charging I had. Motorola phones are not very forgiving to charge unless youre booted or on the battery charge screen. Thats why I was freaking out. I kies updated from that same botched image and it seemed to resolve my touchscreen issue. Time will tell. Only problem is now I forgot to protect root before the update so superuser doesnt know where to find the binaries. Does the CF Autoroot still work with 4.1.2? If so ill just use that.
Either way, enough problems cleared for one night. Im going to bed. Gotta wake up for work in the morning.
Sent from my GT-N8013 using xda premium
RandomAwesomeGuy said:
Question for Barry: What is the difference between the hotfile link you provided and sammobile firmware?
Click to expand...
Click to collapse
Hopefully nothing. Mine's just the direct link to the Samsung-Updates upload. Where files exist in both places I post Samsung-Updates version because you don't need to register.
BTW thank you guys. It's always good to know that the community is looking out for each other. I think once I'm "100%" stock TriAway and all I ain't flashing to a different stock base again. Lol. Although I do like the stock German folders vs the crappy US ones that are literal folders that are ugly. Guess I need to find a new launcher. And Barry thanks for helping me enjoy 4.1.1 in the meantime!
Sent from my DROID RAZR using xda premium

[STOCK][ODIN][TARs][3/17/15]Latest - N910PVPU1BOB7 Stock TAR

UPDATED 3/17/15 - Added OB7 tar
I didn't see a decent link to the stock NIE/NK2/OB7 tar that wasn't on rapidgator or similar crappy site, so I uploaded it to AFH.
Required Files
N910PVPU1BOB7 tar - https://www.androidfilehost.com/?fid=95916177934542777
Samsung USB Drivers - https://www.androidfilehost.com/?fid=95784891001612594
Odin - https://www.androidfilehost.com/?fid=95784891001612591
How to Flash
Install Samsung USB Drivers (if you haven't already)
Unzip N910PVPU1BOB7_N910PSPT1BOB7_SPR.zip, you'll have a file called N910PVPU1BOB7_N910PSPT1BOB7_N910PVPU1BOB7_HOME.tar.md5
Unzip Odin-v3.07.zip
Right-click on Odin3-v3.07.exe > Run as Administrator
Reboot your phone into Download mode - Power off, then press and hold Power + Home + Volume Down. Press Volume Up when you see the warning screen
Click on the PDA button and pick the N910PVPU1BOB7_N910PSPT1BOB7_N910PVPU1BOB7_HOME.tar.md5 file, wait until Odin says that the MD5 was checked successfully
Click Start
Once finished, you'll be back to stock. This WILL NOT reset the KNOX Warranty flag if you've rooted, it will only put you back to the stock ROM/recovery/firmware. Enjoy
Old TARs
N910PVPU1ANK2 tar - https://www.androidfilehost.com/?fid=95853297432265112
N910PVPU1ANIE tar - https://www.androidfilehost.com/?fid=95784891001612590
Thanks for this my man
Thank you sir.
This will come in handy so many times to so many people out here. Thanks.
I've been looking for a decent mirror forever. Thanks!
darshiki said:
I've been looking for a decent mirror forever. Thanks!
Click to expand...
Click to collapse
I'm a bit hurt, what was wrong with mine?
Thank you Sir
shabbypenguin said:
I'm a bit hurt, what was wrong with mine?
Click to expand...
Click to collapse
Oops, sorry shabby! If you had one, I didn't see it. You didn't have a thread for it, right? Cause I looked and didn't see one.
There's a few already, in general where these threads belong. Moving this there.
-viperboy- said:
Oops, sorry shabby! If you had one, I didn't see it. You didn't have a thread for it, right? Cause I looked and didn't see one.
Click to expand...
Click to collapse
Oh i didnt have a thread for it, just mentioned a few times through various other threads that talked about getting the stock tar.
Will this wipe me to a clean slate
leandrae400 said:
Will this wipe me to a clean slate
Click to expand...
Click to collapse
Yes it will give you a fresh clean roms it but everything back to stock no root... But if u are rooted and do this it still doesn't zero out your Knox being tripped if u did root ur phone my on the thanks I hit the wrong button
Sent from my SM-N910P using Tapatalk
shabbypenguin said:
Oh i didnt have a thread for it, just mentioned a few times through various other threads that talked about getting the stock tar.
Click to expand...
Click to collapse
Ah, the good old days of the T-Mobile CF-Auto-Root It feels like so long ago...lol.
Is this supposed to format the phone. I flashed and everything went great however it did not format the phone. Is left all the information in prior rom
---------- Post added at 02:51 AM ---------- Previous post was at 02:36 AM ----------
I only ask cuz i got a force close on set up. Even after i did a master clear
-viperboy- said:
I didn't see a decent link to the stock NIE tar that wasn't on rapidgator or similar crappy site, so I uploaded it to AFH.
Required Files
N910PVPU1ANIE tar - https://www.androidfilehost.com/?fid=95784891001612590
Samsung USB Drivers - https://www.androidfilehost.com/?fid=95784891001612594
Odin - https://www.androidfilehost.com/?fid=95784891001612591
How to Flash
Install Samsung USB Drivers (if you haven't already)
Unzip N910PVPU1ANIE_N910PSPT1ANIE_SPR.zip, you'll have a file called N910PVPU1ANIE_N910PSPT1ANIE_N910PVPU1ANIE_HOME.tar.md5
Unzip Odin-v3.07.zip
Right-click on Odin3-v3.07.exe > Run as Administrator
Reboot your phone into Download mode - Power off, then press and hold Power + Home + Volume Down. Press Volume Up when you see the warning screen
Click on the PDA button and pick the N910PVPU1ANIE_N910PSPT1ANIE_N910PVPU1ANIE_HOME.tar.md5 file, wait until Odin says that the MD5 was checked successfully
Click Start
Once finished, you'll be back to stock. This WILL NOT reset the KNOX Warranty flag if you've rooted, it will only put you back to the stock ROM/recovery/firmware. Enjoy
Click to expand...
Click to collapse
Is this supposed to format the phone. I flashed and everything went great however it did not format the phone. Is left all the information in prior
Nope u have wipe everything manually this just gets u back to true stock form
Sent from my SM-N910P using Tapatalk
sliverr7x said:
Nope u have wipe everything manually this just gets u back to true stock form
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Thanks for the info. Do youbthink this isnthe reason i get a foreclose on mobile service everytime and sprint zone shows on the notification screen frozen at 97%. I have to forceclose the app to get it to go alway
rcmartin57 said:
Thanks for the info. Do youbthink this isnthe reason i get a foreclose on mobile service everytime and sprint zone shows on the notification screen frozen at 97%. I have to forceclose the app to get it to go alway
Click to expand...
Click to collapse
This happens on a brand spanking new Sprint note 4 right out of the box. I know this because when me and my wife got our new phones at a corporate Sprint store the sprint installer "stopped working" on first boot when they were activating our phones and turning them on for the first time. This is caused by the way they have these installer/preload apk's in the rom and the fact that the installer has to contact the network and actually download files during setup. This is NOTHING to worry about. Simply reboot your phone a second time and the sprint configuration installer will initialize and do it's thing. This is jst a little quirk but I've seen on on stock unrooted phones and rooted phones exactly the same.
tx_dbs_tx said:
This happens on a brand spanking new Sprint note 4 right out of the box. I know this because when me and my wife got our new phones at a corporate Sprint store the sprint installer "stopped working" on first boot when they were activating our phones and turning them on for the first time. This is caused by the way they have these installer/preload apk's in the rom and the fact that the installer has to contact the network and actually download files during setup. This is NOTHING to worry about. Simply reboot your phone a second time and the sprint configuration installer will initialize and do it's thing. This is jst a little quirk but I've seen on on stock unrooted phones and rooted phones exactly the same.
Click to expand...
Click to collapse
Thanks forbyhe insight. Knowing this i flashed this rom and everything is running smoothly

Categories

Resources