[Q] sprint galaxy s tablet - Galaxy Tab General

hello everyone.... fairly new too here but i have post before back in my mugal days..
Ok im having a big problem with my tablet, after a factory wipe (reset), and after boot up i get the introductory screen but the keyboard wont pop up. I then i figure let me just skip this part.
Get to what supposed to be the home screen but i get nothing just a black screen, but i am able too see notification bar with time and battery status but below is just black. I try and wipe again (holding volume down and power button) thinking maybe something didnt install correctly, and sure enought still the same problem. vibrate once followed by two consecutive vibrates (error setup wizard failed start force close)
called sprint they couldn't help me. Now my question is do anyone have the stock sprint firmware in the form of a update.zip so i can put on sdcard and flash to see if that fixes problem or do i just have a brick?

1) Wrong forum
2) Download Roto JME v4 (It's on this forum)
3) Flash using Odin.
Sent from my BBC B using a V.21bis modem

acolwill said:
1) Wrong forum
2) Download Roto JME v4 (It's on this forum)
3) Flash using Odin.
Sent from my BBC B using a V.21bis modem
Click to expand...
Click to collapse
Sorry if i posted this in the wrong spot. ANY MODS CAN YOU MOVE THIS TO CORRECT FORUM.
Even tho i did read up on Roto JME v4 it say if for GSM version. I have sprint (CDMA) version.

where can i get the drivers when you put tab in download mode?

Review #1 above, search for it. Don't get others to do your work.

rangercaptain said:
Review #1 above, search for it. Don't get others to do your work.
Click to expand...
Click to collapse
I didn't ask anyone to do anything for me, even thought i found it my self anyways thanks for those who helped.

Related

Bell SGS wont use 3 button reboot

I have been trying all day to get this 3 button mode to work for my Bell samsung JH2. I have read that bell released a firmware update to fix it and i believe i have the correct version. Problem is ican never ever seem to get into the 3 button mode properly.. i holy volume up and Home and Power.....then when i see the "I9000 M" screen, i let go of power and keep holing home and volume up. it just boots like normal. What am i doing wrong?
I have same issues , but I got around by using the adb comands through the PC :
something like "adb reboot recovery"
jark99 said:
I have been trying all day to get this 3 button mode to work for my Bell samsung JH2. I have read that bell released a firmware update to fix it and i believe i have the correct version. Problem is ican never ever seem to get into the 3 button mode properly.. i holy volume up and Home and Power.....then when i see the "I9000 M" screen, i let go of power and keep holing home and volume up. it just boots like normal. What am i doing wrong?
Click to expand...
Click to collapse
When did you flash to JH2?
Jark...
Have you "reflashed" to JH2 by using the regedit trick you can find here in the forum? I had flashed to JH2 the day after I bought my phone and I still had the 3button problem but when the firmware was re-released and I followed the regedit trick it fixed the issue.
You will need to update your Kies as well. Just search the forums for the instructions on these items and you should be "good to go"...
Hope it works out for you!!!
yiannisthegreek said:
Jark...
Have you "reflashed" to JH2 by using the regedit trick you can find here in the forum? I had flashed to JH2 the day after I bought my phone and I still had the 3button problem but when the firmware was re-released and I followed the regedit trick it fixed the issue.
You will need to update your Kies as well. Just search the forums for the instructions on these items and you should be "good to go"...
Hope it works out for you!!!
Click to expand...
Click to collapse
i had flashed the day i bought the phone...aka last month or something. I found the reggedit fix. hmm interesting i shall try this just ater my kies is done updating. I will obviously loose my apps and stuff correct? what a shame.
jark99 said:
i had flashed the day i bought the phone...aka last month or something. I found the reggedit fix. hmm interesting i shall try this just ater my kies is done updating. I will obviously loose my apps and stuff correct? what a shame.
Click to expand...
Click to collapse
You definitely have to reflash JH2 using the registry trick described in the main topic. I had to do the same but the process is pretty straightforward and you shouldn't expect problems.
tarambuka said:
You definitely have to reflash JH2 using the registry trick described in the main topic. I had to do the same but the process is pretty straightforward and you shouldn't expect problems.
Click to expand...
Click to collapse
thanks the main reason i wanted to flash and get this button combo to workw as to upload my screenshot of my phone and try some custom roms. Enjoy previewing my homescreen in the "show your desktop" thread.
thanks for everyones help! finally rooted with the one click lag fix < havent installed the lag fix yet as things are fine. going to downloadmore apps. thanks for the reggedit hack! and heres a screenshot of my homescreen.
http://forum.xda-developers.com/showpost.php?p=8255572&postcount=548
Thread closed. Please search before posting questions such as this, the answers already exist in other threads.

Black Screen Vibrant

Okay, I know there is many post about this, but none seem to answer my question or help me. I have a Vibrant and I've been searching this site along with google to help fix my phone.
I brought it off a friend so warranty won't happen since T-Mobile is being asses. My phone is suck on the black screen after it passes the big S logo. It stays black, and I get 4 lights bright on the buttons. I've reflashed my phone with Odin and it has not worked. I think it correctly as well. Com3 was on, ran the stock Vibrant with Pitt and Tar with PDA one. That had only got my phone off the complete brick that my phone had gone through, when It wouldn't even turn on.
I got the brick off and now I'm stuck with this program. I did have a one click root fix and I was trying to mess around with clock work. To help answer some questions. No, I can not boot into recovery mode. Yes I have cleaned and wipe out cache. Yes I can go into Download mode, but its pointless since odin doesn't do much for me. No I can not go into the phone since the black screen is there and no I can not flash a update file for some reason.
Saying that, I would be grateful for some help and before hand I thank anyone who comes across this even if they don't help, just for taking time to read this and maybe referring someone else to help me or even pointing me in the right direction. Thanks and once again PLZZZZZZZ HELPPPPPPPPPPPPPPPP.
No, odin is not "useless." I'm pretty positive that you applied Odin wrong.
- Check the MD5 on the files you downloaded; verify they are indeed identical.
- Search for development forum for "drivers"... theres a thread posted by TGA_Gunner. Find that thread and download the version respective to your OS (x86 or x64). This one is proven to work.
What exactly happened in Odin?
zephiK said:
No, odin is not "useless." I'm pretty positive that you applied Odin wrong.
- Check the MD5 on the files you downloaded; verify they are indeed identical.
- Search for development forum for "drivers"... theres a thread posted by TGA_Gunner. Find that thread and download the version respective to your OS (x86 or x64). This one is proven to work.
What exactly happened in Odin?
Click to expand...
Click to collapse
Okay. One thing I notice when I try to put my phone into the Android system recovery it says this "
-- Movi_check start .. !!
checksum confirmation need _checksum [1301305579]
MBR _Chksum in header :4.1
MBR checksum : EC0063A432AFDBA2B104C3F0DF52FE3D
MBR Checksum Error
Movinand Checksun Confirmaton Fail
-- movi_checking done!...
# MANUAL MODE #
-- Appling Muti - CSC ...
Installing Muti - CSC "
Another thing, I hit reinstall packages and It says "
-- install from sdcard...
finding update package ...
opening update package ...
E: cant open /sdcard/update.zip
(no such file or directory)
installation aborted.
the drivers I use are the samsung Vibrant drivers for windows 7 64. I know it works because the phone before didn't come up when I didn't use the driver. It always failed and when I install it, than it read my phone. When I connect the phone to the computer, the phone does read it and on odin, it says com 3 in yellow. I than Install pitt and install tar.
The tread you sent me too, I actually went through there before. Both of those drivers didn't work but I found one for windows 7 and it started working for my computer. I could tell it works because the computer actually reads the phone and so does odin. Like I use odin right because it goes through the phone and than says pass at the end. so like WTF lol. I'm pretty sure I'm doing it right tho
Another thing. I used odin a few seconds ago, got the phone to run and it went through the green bar and a blue screen now saying reset came up. My phone than went into androids recovery mode but it started to wipe out data. When doing so, the data said wipe fail. It booted up and now back to the start. Black screen, 4 panels on the bottom lit up and nothing to do.
I'm starting to think it has to do with clockwork I did a partition in it and every since than my phone has been doing this blackscreen with 4 lights.
ANY body ?
help would def be appreciated and even donates if possible. I just need my phone to work
same thing here, know idea, odin says everything passed but still the black screen and four buttons. i also noticed that the sound and tmo splash screen are not in sync. no idea ???? help would be great!!!!!!!!!!! same errors though. also from the partion feature in clockworkmod.
i assume your on windows i don't keep up if there is a working version for mac. Anyway, make sure your update.zip is just named update DO NOT add .zip yourself or the phone for what ever reason sees .zip.zip. I would also go ahead re download your odiin files just to make sure non of them are corrupted for what ever reason.
files all check out good, i can't gain access to the phones sd, i have flashed this thing with every checked build i could find, all with the same result. the master boot record is not adding up.? still have know idea.
have you tried using this.. http://forum.xda-developers.com/showthread.php?t=740558
this work for me and was able to flash to stock..
somebody please help I'm experiencing the same problem as the OP? can somebody point me in the right direction I've been looking for hours
Instead of making us read the entire thread perhaps you could summarize your specific problem.
My initial impression goes like this.
1. Get into download
2. ODIN back to STOCK 2.1
Run odin in admin mode
Use rage against the cage
After getting back to stock Recovery 2e go ahead reroot and flash away
Sent from my SGH-T959 using XDA App
Don't know if this is still an issue, but here's how I fixed it.
http://forum.androidspin.com/showth...yo-That-does-not-Brick!-Downgrading-Is-Fine-)
Downloaded this file knowing it wouldn't work, Had ODIN flash it and got into this weird recovery screen. Just pulled the battery and then flashed back to stock using ODIN.
Helped me out.
Use 512 .pit and True Stock 2.1 from this post
http://forum.xda-developers.com/showthread.php?t=747335
And quit messing with your phone! lol
This is how i fixed mine too, my phone would go through a seemingly normal start up, but the UI would never load and it would stay on a blank screen.
Flash Eugenes373s froyo that doesnt brick. once it brings you to the recovery screen, pull the battery and once again use odin to flash back to stock. the phone should boot up now.
mnm0071980 said:
ANY body ?
help would def be appreciated and even donates if possible. I just need my phone to work
Click to expand...
Click to collapse
Hey i just encountered the same exact problem four days ago except i flash with odin it says pass but im still stuck on a black screen after the s logo my problemwas encountered by tryig flash a kernal. Please tell me that u found a solution

Help my samsung epic 4g its bricked a day later after i rooted

I ROOTED MY EPIC yesterday with drockstar oneclick method and today now my phone wont go past the samsung page please help what can i do ????
http://forum.xda-developers.com/showthread.php?t=794138
Follow the first links instructions using the files on that page.
Please search before posting in the wrong section.
thanks
thanks and sorry im gunna try that link you gave me
Can you boot into Clockwork?
man buddy i dunno how to boot into clockwork
in this phone i dunno how to do that i came form a htc evo 4g and the only thing i know how to do in this phone was do the drockstar method how do i boot into clockwork ?
Hold vol down, camera button, and power button all at once while booting.
nope it doesnt work
it just goes directly to samsung page any ideas? right now im gunna try the odin and do stock is that my best way to go
boogief1 said:
it just goes directly to samsung page any ideas? right now im gunna try the odin and do stock is that my best way to go
Click to expand...
Click to collapse
Yep that is the way to go. It works great.
thanks
imdownloading the stock firmware and tahnks for ur help guys
anyone wich file i need for stock i see so many
everytime i try to go to stock using odin it fails
boogief1 said:
everytime i try to go to stock using odin it fails
Click to expand...
Click to collapse
Reboot your computer and phone. Get odin set up with the tar file in the pda area and the pit file in the pit area. Make sure the only box on odin that is checked is reboot. Then put your epic into download mode and then connect it to your computer. Once odin displays a com port you know your phone is connected to odin. Click start and a few minutes later your phone should reboot on its own.
Sent from my SPH-D700 using XDA App
First things first. This should probably be in the general section, or the very least the QnA post. If you are having trouble with using ODIN there are a couple of things you can try to get it up and running.
1) Judging by your lack of knowledge regarding what 'bricking' is, the most probable cause of error is user error. As an aside, bricking is turning your phone into a brick. If you can get to the download mode, you have not bricked your phone. Make sure you put all of the files in the correct places and ONLY have auto-reboot checked.
2) If you are using 1.61 to no avail, some people have had better luck with 1.3.
3) Make sure the download you are flashing isn't corrupt. Most people post md5 checksums with their files. If you need help with this just google "md5 validator." If you are running linux or osx, the validator is most likely already installed.
http://forum.xda-developers.com/showthread.php?t=861397
the same think happened with my epic. did u get it straight
rippleeffect said:
the same think happened with my epic. did u get it straight
Click to expand...
Click to collapse
Yes just follow the advice given in this thread ...
Eventually it will work also i recommend buying another cable other than the Stock Samsung Cable its a POS.
Mosey on over to the Bonsai site (google is your friend) and help yourself to heimdall and the MasterKey app tonight. You will also need a tar file. Much more robust than ODIN and more versatile.
Sent from Bonsai 7.1.1.1
Watch this:
http://www.youtube.com/watch?v=YQ2g6J1JgjU
RE: # Arrow # Help my samsung epic 4g its bricked a day later after i rootedArrow
I also rooted my Epic using the one click method with Clockworkorange mod. Bricked two phones. Odin did not work either. Had to taqke back to Sprint they replaced the phones at no charge to me. However the phone was only three weeks old.
revival
First of all watch the revival, second why would u get an epic 4g when the touch is out and third theres as reset button and various other things you coould have done
irule9000 said:
First of all watch the revival, second why would u get an epic 4g when the touch is out and third theres as reset button and various other things you coould have done
Click to expand...
Click to collapse
Maybe $49 vs $199 and physical keyboard vs. none? If someone straight up wanted to trade me an SGII for the Epic I wouldn't do it. Waiting for an SGIII with LTE and keyboard.

please help odin won't connect

I will try and explain as best as I can, please forgive me as I am a nexbie to thid flashing firmware, I flashed my galaxy s fron froyo 2.2 to the gingerbread stock 2.3 XXJVR from this site and everything went fine but wanted to use the MilkyS rom so downloaded everything and followed the instructions exactly but Odin just can't connect, Keis connects fine and odin finds the phone when it is switched on but when I put it in download mode there is something really wrong as I don't get the download screen that I originally had with the yellow triangle and the android man but now when I go into download mode I get a screen with blue writing at the tp saying reboot system now
apply update from SD card wipe data/factory reset
wipe cache partition
then I have yellow writing at the bottom of screen
copying media files
sucsessfully copied "manual mode"
applying Multi CSC....
Installing Multi-CSC.....
Applied the CSC - code "CPW"
Sucsessfully applied multi-CSC.
and if I leave it like that for too long the battery seems to smell like its melting or something, I have tried everything on another laptop running windows XP as well as windows 7 but no joy can anyone please help me with this issue, please explain in plain english and not to techy as I am a newbie and not much good at this stuff, thank you so much for any help, I am in the Uk..
So you post this problem in the "Development Section"? Why? Please please post this in the Q and A section and your question will be anwered.
Sent from my GT-I9000 using XDA Premium App
I sense OP Iron Fist soon approaching....
tanzi said:
I will try and explain as best as I can, please forgive me as I am a nexbie to thid flashing firmware, I flashed my galaxy s fron froyo 2.2 to the gingerbread stock 2.3 XXJVR from this site and everything went fine but wanted to use the MilkyS rom so downloaded everything and followed the instructions exactly but Odin just can't connect, Keis connects fine and odin finds the phone when it is switched on but when I put it in download mode there is something really wrong as I don't get the download screen that I originally had with the yellow triangle and the android man but now when I go into download mode I get a screen with blue writing at the tp saying reboot system now
apply update from SD card wipe data/factory reset
wipe cache partition
then I have yellow writing at the bottom of screen
copying media files
sucsessfully copied "manual mode"
applying Multi CSC....
Installing Multi-CSC.....
Applied the CSC - code "CPW"
Sucsessfully applied multi-CSC.
and if I leave it like that for too long the battery seems to smell like its melting or something, I have tried everything on another laptop running windows XP as well as windows 7 but no joy can anyone please help me with this issue, please explain in plain english and not to techy as I am a newbie and not much good at this stuff, thank you so much for any help, I am in the Uk..
Click to expand...
Click to collapse
Omg...you are going in recovery...*facepalm*
Post in the right damn section next time.
Sent from my GT-I9000 using XDA Premium App
tanzi said:
I will try and explain as best as I can, please forgive me as I am a nexbie to thid flashing firmware, I flashed my galaxy s fron froyo 2.2 to the gingerbread stock 2.3 XXJVR from this site and everything went fine but wanted to use the MilkyS rom so downloaded everything and followed the instructions exactly but Odin just can't connect, Keis connects fine and odin finds the phone when it is switched on but when I put it in download mode there is something really wrong as I don't get the download screen that I originally had with the yellow triangle and the android man but now when I go into download mode I get a screen with blue writing at the tp saying reboot system now
apply update from SD card wipe data/factory reset
wipe cache partition
then I have yellow writing at the bottom of screen
copying media files
sucsessfully copied "manual mode"
applying Multi CSC....
Installing Multi-CSC.....
Applied the CSC - code "CPW"
Sucsessfully applied multi-CSC.
and if I leave it like that for too long the battery seems to smell like its melting or something, I have tried everything on another laptop running windows XP as well as windows 7 but no joy can anyone please help me with this issue, please explain in plain english and not to techy as I am a newbie and not much good at this stuff, thank you so much for any help, I am in the Uk..
Click to expand...
Click to collapse
Since the others wont offer any help. (and yes, i understand this is the development section and not the Q&A).
Try a Factory Reset, restart your phone.
Hold Volume DOWN+"Home" button+Power UNTIL you get to the screen with the yellow triangle specifying it's in download mode.
xWarMachine04 said:
Since the others wont offer any help. (and yes, i understand this is the development section and not the Q&A).
Try a Factory Reset, restart your phone.
Hold Volume DOWN+"Home" button+Power UNTIL you get to the screen with the yellow triangle specifying it's in download mode.
Click to expand...
Click to collapse
Im sure he would have gotten help once it was moved to the Q&A section.....
Should someone really be asking this if they are flashing ROMs? Cant tell the difference between recovery and download? Everyone starts out as a noob, but come on
And i said i understand that, but leave the moderating job to the moderators. If someone is in need, you should help them first instead of telling them they need to be somewhere else and THEN ->inform<- them where they should be posting. There's nothing wrong with being informative and empathetic.
xWarMachine04 said:
Since the others wont offer any help. (and yes, i understand this is the development section and not the Q&A).
Try a Factory Reset, restart your phone.
Hold Volume DOWN+"Home" button+Power UNTIL you get to the screen with the yellow triangle specifying it's in download mode.
Click to expand...
Click to collapse
Thank you xWarMachine04 for your help and to everyone else I am very sorry for posting this in the wrong section, I will take my slap n the wrist and will put it in the right section, also just a " I am afraid that you have put this in the wrong section so would you mind moving it please" would have been nice, it was a genuine mistake and just for the record I am a she not a he..........................
No problem, wish you all the best
xWarMachine04 said:
And i said i understand that, but leave the moderating job to the moderators. If someone is in need, you should help them first instead of telling them they need to be somewhere else and THEN ->inform<- them where they should be posting. There's nothing wrong with being informative and empathetic.
Click to expand...
Click to collapse
True enough, I thought it more funny then anything hence my iron fist post
My problem is I lack empathy
xWarMachine04 said:
And i said i understand that, but leave the moderating job to the moderators. If someone is in need, you should help them first instead of telling them they need to be somewhere else and THEN ->inform<- them where they should be posting. There's nothing wrong with being informative and empathetic.
Click to expand...
Click to collapse
if everyone was thinking the same , this section would have been named "Galaxy S I9000 Android Development/Q&A"
why would you post here when you know its wrong.
faster response?
Like i said, let the mods do their jobs. IF a thread needs to be moved because of a person posting it in the wrong area, let them move it. This is a simple mistake a LOT of people make every day. Nonetheless, tanzi got her help needed, problem solved.
This conversation is over.
Is lagfix disabled?
Sent from my GT-I9000 using XDA Premium App
Thanks for all the help and advice but I have now managed to get Odin connected and have now flashed DarkysRom 9.5 Extreme, so thanks again..............

[Q] Can't get into Download Mode after Odin Flash

First off - i've searched all day & stayed in IRC for over 40 mins without a hit so i'm looking for a little help.
I was upgrading to Froyo from a "stock" Continuum today using Odin. Everything seemed smooth - got a pass message & unplugged the usb cable. Now nothing (won't power up, etc) & i can't get into download mode.
I've tried all of the button/cable/battery combos that i could find. I have tried to flash a recovery using Odin & it gets stuck with the message "setup connection" in the message box.
I know my pc is seeing the phone (though you can't access the SD card or memory) & Odin is seeing it (yellow box) but i can't seem to get past this point or go back to the original.
Any help is appreciated.
mountainmanscg said:
First off - i've searched all day & stayed in IRC for over 40 mins without a hit so i'm looking for a little help.
I was upgrading to Froyo from a "stock" Continuum today using Odin. Everything seemed smooth - got a pass message & unplugged the usb cable. Now nothing (won't power up, etc) & i can't get into download mode.
I've tried all of the button/cable/battery combos that i could find. I have tried to flash a recovery using Odin & it gets stuck with the message "setup connection" in the message box.
I know my pc is seeing the phone (though you can't access the SD card or memory) & Odin is seeing it (yellow box) but i can't seem to get past this point or go back to the original.
Any help is appreciated.
Click to expand...
Click to collapse
Try pulling your battery and holding down the power button for a slow count of 20 to see if download mode comes back. After that, you should be good to flash stock ec07 and then recovery kernel. After that, whichever rom you choose. If that doesn't work, I'll try to get into IRC at some point tomorrow (today).
That didn't work either - screen is still blank & it won't progress in Odin. I'll jump back into IRC if anyone has any other ideas - thanks.
i dont know what to tell you continuums are very hard to brick and if u cant get into download mode then theres not that much u can do im afraid I was talking to adam outler about trying the unbrickable mod on a continuum but he does not have one to test. now he got the fascinate to work so id pm him and see if he'll let you send your phone to him
Hey TXwolf - i had to run out for a while - saw where you got on IRC earlier. Verizon is sending me a new phone, so i guess i'll just give up on saving this one...
mountainmanscg said:
Hey TXwolf - i had to run out for a while - saw where you got on IRC earlier. Verizon is sending me a new phone, so i guess i'll just give up on saving this one...
Click to expand...
Click to collapse
I'll be in irc in a few if ya wanna give it another shot
I too manged to brick my phone to point to where I can not even get to the download screen. I have the same problem as OP, Odin will not move past SetupConnection when trying to recover following this post.
androidforums.com/continuum-all-things-root/457453-oh-crap-i-screwed-my-phone-up-recovery-guide.html
Any further help would much appreciated seeing as how I am past my warranty period and do not really want to buy a new phone.
PapaKaster said:
I too manged to brick my phone to point to where I can not even get to the download screen. I have the same problem as OP, Odin will not move past SetupConnection when trying to recover following this post.
androidforums.com/continuum-all-things-root/457453-oh-crap-i-screwed-my-phone-up-recovery-guide.html
Any further help would much appreciated seeing as how I am past my warranty period and do not really want to buy a new phone.
Click to expand...
Click to collapse
If this is frenzifun, from android forums, this is what happened to him
He started a flash of stock ec07 with pit and repartition checked. It flashed params.ifs, boot, SBL and recovery. Then it removed itself (frenzifun, if you could post the flash log for others it might help them) from there, it wont go into dl mode. I was trying to help him in irc, but I'm out of options, other than making a jig. The only thing I can think of, that's causing this is the somehow the button mappings for vol down got erased. I'm not sure how it would, though. Especially since it should be a hardware mapping, independent of any software. And if that is the case, I don't know how to fix it.
If this isn't frenzifun, disregard everything I just said.
Txwolf1980 said:
If this is frenzifun, from android forums, this is what happened to him
He started a flash of stock ec07 with pit and repartition checked. It flashed params.ifs, boot, SBL and recovery. Then it removed itself (frenzifun, if you could post the flash log for others it might help them) from there, it wont go into dl mode. I was trying to help him in irc, but I'm out of options, other than making a jig. The only thing I can think of, that's causing this is the somehow the button mappings for vol down got erased. I'm not sure how it would, though. Especially since it should be a hardware mapping, independent of any software. And if that is the case, I don't know how to fix it.
If this isn't frenzifun, disregard everything I just said.
Click to expand...
Click to collapse
I am not sure who frenzifun is but this still doesn't sound good for my situation. What I can tell you is I was following directions to try an update my phone from 2.1 to 2.2 using Odin. I believed the process was completed, not realizing it was not and unplugged my phone from the computer. From that point on I have not been able to turn the phone on or get the the download screen. Here is the odd thing if I plug the phone into my computer Windows recognizes and Odin can see a COM port but I still can not get past the setup connection when following the directions to try a recover my phone.
PapaKaster said:
I am not sure who frenzifun is but this still doesn't sound good for my situation. What I can tell you is I was following directions to try an update my phone from 2.1 to 2.2 using Odin. I believed the process was completed, not realizing it was not and unplugged my phone from the computer. From that point on I have not been able to turn the phone on or get the the download screen. Here is the odd thing if I plug the phone into my computer Windows recognizes and Odin can see a COM port but I still can not get past the setup connection when following the directions to try a recover my phone.
Click to expand...
Click to collapse
If that is the case, we might be able to do something. Can you meet me in irc at 830 central, tonight?
Txwolf1980 said:
If that is the case, we might be able to do something. Can you meet me in irc at 830 central, tonight?
Click to expand...
Click to collapse
Txwolf I do appreciate the offer and I am in PST and that would 630 my time but I need to take of a few things after and I am not sure I could make that time. One of my places to go is my local Verizon store to see if there anything they can do.
PapaKaster said:
Txwolf I do appreciate the offer and I am in PST and that would 630 my time but I need to take of a few things after and I am not sure I could make that time. One of my places to go is my local Verizon store to see if there anything they can do.
Click to expand...
Click to collapse
Unlessvyou have a hookup, i doubt verizon will help. What I was gonnavtry o garuntees here) is
1. Try flashing in odin with pit, but leavevrepartition unchecked. That most likely won't work, but it's a shot.
2. Use the heimdall version ofvthe guide. I think that may have a better chance. I'll hang out in irc for a while tonight. Just in case.
Txwolf1980 said:
Unlessvyou have a hookup, i doubt verizon will help. What I was gonnavtry o garuntees here) is
1. Try flashing in odin with pit, but leavevrepartition unchecked. That most likely won't work, but it's a shot.
2. Use the heimdall version ofvthe guide. I think that may have a better chance. I'll hang out in irc for a while tonight. Just in case.
Click to expand...
Click to collapse
I just got home but will again be leaving soon. I am sorry if you waited in IRC for me. You are right Verizon did nothing.
PapaKaster said:
I just got home but will again be leaving soon. I am sorry if you waited in IRC for me. You are right Verizon did nothing.
Click to expand...
Click to collapse
Its all good. Try the suggestions I gave you, when you have time. If they don't work, I'll have some down time tomorrow or sunday. Just let me know, and we'll see if we can make the schedules match

Categories

Resources