[Q] Jelly bean OTA4 problem - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

hello. i flashed stock rom via odin. rooted phone, flashed cwm, jbv3, ota1,ota2,ota3,ota4,clock to right. but after i flashed ota 4 i have a problem on clock. more exactly at Alarm. when i set to ON an alarm the screen freeze for 1-2 sec and i get force close clock error. am i the only one haveing this problem since i haven't seen any other posts about this. if is it just me tell me what i did wrong or how can i fix this please.
and one more question. is is worth to use merruk kernel since i want more BATTERY saving ? is this kernel going to use more battery or not ?
thanks in advance

I have just set the Alarm, didn't cause any problem..Let's see what others say..
For Good Battery Saving you should use Kuro Kernel which comes by default with JellyBlast v3..Merruk Kernel can overclock Galaxy Y to 1.2 GHz, but it drains the battery too.. Good Luck

weird. i tried reinstalling again and again from the begining. i will tell you exact steps i'm making maybe i make something wrong.
1.i flash stock rom via odin ( DDLA1, i don't know if this is the best one but i have a problem with my signal and calls quality if i use other stock roms (don't know if this is the reason or is just my phone) maybe you can help me resolve this too)
2. i reset phone to factory settings
3. i copy root and cwm archives to sd-card
4. i flash root via stock recovery
5. boot phone and check if it's rooted
6. flash cwm, wipe data/cache/davlik cache
7. flash through cwm JBV3, boot phone, flash through CWM OTA1, boot phone, flash through CWM OTA2, boot phone, and so on for OTA3 and OTA 4.1(revised) then flash through CWM also clocktoright archive
8. so now. on boot i get an error for jelly bean search (i know how to resolve this - uninstalling it) and i still receive force close on clock when i try to turn on an alarm.
any help ? what am i doing wrong ? maybe my stock rom isn't good ? but read at step1 about my problem with calls quality and signal and tell me if the stock rom has anything to do with it or not.
thanks again ^^

JellyBean Search Force Closes at boot, that's not a problem at all Happens with everybody..The Alarm Bug is the problem...Did you flash the correct Stock ROM using Sir Doky73's tutorial...Wait for the answers too

well.that's the "thing". i didn't install any rom from Doky's post. i downloaded one from the web which contains all packages for odin (pit,boot,pda,phone and csc) and it's DDLA1 firmware. should i try with one of Doky's firmwares ? which one? because there are many of european multilingual packs ( i'm from romania)
EDIT : should i use this CSC which includes carrier setup for my country (romania) -> CSC Only: OXF CSC for XXLE1 (S5360) and the other files from S5360_XXLE1_OXXLE1_XXLE1 as it says in his post ?

Maybe what you are saying is correct!
Strongly Advice you to PM any senoir dev like DeathNotice01, Ronnieryan, or Sir Doky himself
I didn't tried flashing Stock ROM ever..So I don't quite know about it
Whatever you do, first ask a Dev for his advice Good Luck!

thanks...can you tell me what baseband version do you have ?

I experience the alarm clock bug too. But i don't see it as much of a problem because even though it force closes it still sets up an alarm. I was even able to wake up to it this morning.

yaur7_cs said:
hello. i flashed stock rom via odin. rooted phone, flashed cwm, jbv3, ota1,ota2,ota3,ota4,clock to right. but after i flashed ota 4 i have a problem on clock. more exactly at Alarm. when i set to ON an alarm the screen freeze for 1-2 sec and i get force close clock error. am i the only one haveing this problem since i haven't seen any other posts about this. if is it just me tell me what i did wrong or how can i fix this please.
and one more question. is is worth to use merruk kernel since i want more BATTERY saving ? is this kernel going to use more battery or not ?
thanks in advance
Click to expand...
Click to collapse
Yes bro i was too having this problem...i fixed it by pasting clock app of ota4 on system/files....

hmm, i think the clock need fix, but the alarm still work
sorry bad english

I too am facing fc in alarmclock .No need to worry it`s an error .Hope avijit will fix it next time.

Yes, faced the alarm bug. But able to set up the alarm, so not much of a worry! Hope the developer will fix it soon.

Clock bug resolved
yaur7_cs said:
hello. i flashed stock rom via odin. rooted phone, flashed cwm, jbv3, ota1,ota2,ota3,ota4,clock to right. but after i flashed ota 4 i have a problem on clock. more exactly at Alarm. when i set to ON an alarm the screen freeze for 1-2 sec and i get force close clock error. am i the only one haveing this problem since i haven't seen any other posts about this. if is it just me tell me what i did wrong or how can i fix this please.
and one more question. is is worth to use merruk kernel since i want more BATTERY saving ? is this kernel going to use more battery or not ?
thanks in advance
Click to expand...
Click to collapse
just copy clock.apk from OTA3 update and install using system app replacer ... thats it .. i m having same problem but now resolved by this method. one con is that clock have old look as that of gingerbread style instead of ICS.. enjoy..:good:

No need to worry Nemesis will be relesed soon.

keypad
plz change the landscape typing as like sony in which we see what screen is instead we have other screen
means as like potrait background keep the landscape background.

Related

[HOWTO]Install zKernel on Wolfbreak's TW 007.1 ROM [UPDATE-THIS THREAD IS NOW OLD]

UPDATE: WOLF HAS RELEASED TW 007.2 THAT INCLUDES THE zKernel.
Thanks to that, the process is much more simpler now. Just flash the files as it says in the Wolf thread.
Mods, please close this. Thanks to all who used this and hopefully this helped you in 007.1
hey thanks for posting this...
i will link up to this from the kernel thread...
btw u should also mention this:
>>
if u have previously used the wifi patch wifi_bt_fix-fxk_froyo_v01.1.zip please remove it using remove_fix_v01.1.zip and try using this test kernel
<<
will do..can i plz have a link to the remove_fix_01.1.zip? Thanks
kantk20111 said:
will do..can i plz have a link to the remove_fix_01.1.zip? Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1077437
Thanks...guide is updated
3.Go to settings-About phone. If, under kernel version, it says anything other than "2.6.29-zKernel-23062011 [email protected]#1", then you will have to do this.
Navigate to system/kernel using root explorer or similar app. DELETE boot.froyo.img, and RENAME boot.img to boot.froyo.img. Restart.
If it shows that kernel version, then skip this step.
Click to expand...
Click to collapse
Thanks a lot for this awesome guide. Im sure it will be very helpful to many users.
I followed ur guide to install custom kernel on WB TW007 with baseband .67.
But Im stuck on step 3. After flashing boot.img in Xrec I couldnt see custom kernel version in About Phone so I navigated to system/kernel using root explorer. There was only just one file named boot.img. So I renamed it to boot.froyo.img, rebooted but still get the stock kernel version in About Phone
Any kind of help will be greatly appreciated
digital_ism said:
Thanks a lot for this awesome guide. Im sure it will be very helpful to many users.
I followed ur guide to install custom kernel on WB TW007 with baseband .67.
But Im stuck on step 3. After flashing boot.img in Xrec I couldnt see custom kernel version in About Phone so I navigated to system/kernel using root explorer. There was only just one file named boot.img. So I renamed it to boot.froyo.img, rebooted but still get the stock kernel version in About Phone
Any kind of help will be greatly appreciated
Click to expand...
Click to collapse
hmm...I'm assuming that you have Stock kernel, right?
First, try re-flashing the boot.img file, but first wipe cache partition and wipe dalvik cache, then do the whole replacement an renaming. If that doesn't work, then try this:
(Thanks Haldi4803)
3. Restart Phone and enter X Recovery: Install first: "chargemon_FXRec_default_CUSTOM.zip" and then "bootloader_bypass_files_v2.zip"
Then, install the kernel on top of that while still in xRecovery. So, you would have installed all 3 files together . Please report back if it works so I can add this step in the OP.
^ Yes! Im on stock kernel. Sorry for not being clear.
Aiight. Im trying what u said right now and will report back.
EDIT: Nope. Nothing worked. Flashing all 3 files didnt work. On the other hand phone started lagging like hell after flashing. Its not responsive at all and Im constantly getting FC on System Process etc
Any thing else??
Hi everyone, dude, I tried follow u tutorial, but this didn't work (ok ok, I'm noob, i tried start this with Stock kernel...). Then I installed TW007.1 with Custom Kernel and didn't appears Custom kernel.. ok, i tried to install Z's custom kernel, following u tutorial and nothing again
What should I do?????
digital_ism said:
^ Yes! Im on stock kernel. Sorry for not being clear.
Aiight. Im trying what u said right now and will report back.
EDIT: Nope. Nothing worked. Flashing all 3 files didnt work. On the other hand phone started lagging like hell after flashing. Its not responsive at all and Im constantly getting FC on System Process etc
Any thing else??
Click to expand...
Click to collapse
u were most probably using xRecovery... flash FreeXperia recovery using FLASHTOOL and then try those files...
BTW if u use "chargemon_FXRec_default_CUSTOM.zip" then u dont need to do any renaming cause that files uses standard boot.img file name
cat /system/kernel/boot.img > /proc/splboot/boot_img
^ For some reason my Xrec is broken and I cant get into Xrec so I tried to install Rec thru Flashtool. It isnt working either
Insall Recovery option is disabled. I click on Ask Permissions, it says allow Superuseraccess on the phone but nothing happens on the phone. I cant do anything on the phone as it keeps FC Process System. It sometimes even doesnt detect USB conncetion
Is the SEUS repair the only option???
digital_ism said:
^ For some reason my Xrec is broken and I cant get into Xrec so I tried to install Rec thru Flashtool. It isnt working either
Insall Recovery option is disabled. I click on Ask Permissions, it says allow Superuseraccess on the phone but nothing happens on the phone. I cant do anything on the phone as it keeps FC Process System. It sometimes even doesnt detect USB conncetion
Is the SEUS repair the only option???
Click to expand...
Click to collapse
sadly, yes. I'm sorry about your phone, I wasn't sure if it would work with the stock kernel. another option could be to install the 3. 52 kernel first before following my instructions, or wait for wolf to officially release a kernel.
again, sorry about causing you to do a full repair
Na u dont need to be sorry. U were trying to help. I might've done something wrong or it was a bad day for me after all. Im repairing thru SEUS right now. Might give it another try in a day or two if WB doesnt officially release a Zkernel supported version of his rom.
But thanks once again for everything and keep up the good work
To those on the stock kernel,
Try to install the 3.51 kernel first, found here, then follow my instructions.
You won't get signal after installing the 3.51 kernel but that's ok, since it's meant for BB52 anyway. Your BB might become unknown as well.
That's what I do on a fresh install
Get baseband .67 first then
1) Fresh install TW007 stock kernel
2) Reboot and check for signal
2) Flash 007.1 update
3) Reboot
4) Flash transparent add-on (Optional)
5) Reboot
6) Flash zKernel_22062011.zip
9) Reboot and you will have the custom kernel but system keep on crashing and no signal
10) So I just reboot and flash this two files by DoomLord
Download link: (boot.img only)
http://www.mediafire.com/?vj9p2xy4p4w24ay
[VIMP NOTE FOR FROYO USERS who do not see any change in custom kernel after flashing the boot.img]
Download link: (wifi.ko module only)
http://www.mediafire.com/?lmh46quh490mzme
VERIFIED WIFI WORKS!
11) Signal is back and system doesn't crash
12) Reboot
13) Flash Contacts_ProSE _FIXED.zip & fb.zip
Thanks to them.
Everything is working. Use cpu master to overclock, it sometime give WLOD though
@gohwh1
u have linked to slightly older files...
i have posted updated kernel 23062011 based on FreeX10 ramdisk... which should work without any issue...
DooMLoRD said:
@gohwh1
u have linked to slightly older files...
i have posted updated kernel 23062011 based on FreeX10 ramdisk... which should work without any issue...
Click to expand...
Click to collapse
If that's working for me, I don't have to change right? Only problem is when overclocking to 1113mhz and playing games, it will WLOD when it's get too hot. Playing games for 3hrs non-stop and only one WLOD is normal right?
The updated kernel will not fix that right?
gohwh1 said:
If that's working for me, I don't have to change right? Only problem is when overclocking to 1113mhz and playing games, it will WLOD when it's get too hot. Playing games for 3hrs non-stop and only one WLOD is normal right?
The updated kernel will not fix that right?
Click to expand...
Click to collapse
thats wht it might!
please do try!
DooMLoRD said:
thats wht it might!
please do try!
Click to expand...
Click to collapse
Is it zKernel_freeX10_aZuZu_23062011.zip?
So I just have to flash it over current? Will flash it tommorrow, it's almost 3am here.
gohwh1 said:
Is it zKernel_freeX10_aZuZu_23062011.zip?
So I just have to flash it over current? Will flash it tommorrow, it's almost 3am here.
Click to expand...
Click to collapse
no this one:
zKernel_23062011 with FreeX10-beta4 ramdisk
http://forum.xda-developers.com/showthread.php?p=15170924#post15170924

[ROM][STOCK][JB 4.1.2] German Stock Rom released

Today Samsung officially released the Jelly Bean 4.1.2 Stock Rom for GT-I9100 Users in Germany.
PDA : I9100XWLSD
CSC : I9100DBTLS7
MODEM : I9100XXLS8
Download
Password is : samdownloads.de
Please make sure using the right Kernel when you want to root your Firmware.
This Build does NOT have the Brick Bug when making a full wipe in CWM, did test is by myself.
Issues
Yes hello, i flashed this rom yesterday and just now i noticed that my phone doesn't vibrate at all now.
When i try to switch from sound to vibrate to mute it doesn't, when i am called it doesn't and most notably it also doesn't vibrate in the sound menu (Vibration intensity settings).
Anybody got a clue what could have caused this bug and does this rom work fine for everybody else?
Energy saving mode is off by the way.
Another lesser thing i miss are the three app-shortcuts you could set on the lock screen in the leaked rom. I assume Samsung just removed them from their official rom?
zippocat said:
Yes hello, i flashed this rom yesterday and just now i noticed that my phone doesn't vibrate at all now.
When i try to switch from sound to vibrate to mute it doesn't, when i am called it doesn't and most notably it also doesn't vibrate in the sound menu (Vibration intensity settings).
Anybody got a clue what could have caused this bug and does this rom work fine for everybody else?
Energy saving mode is off by the way.
Another lesser thing i miss are the three app-shortcuts you could set on the lock screen in the leaked rom. I assume Samsung just removed them from their official rom?
Click to expand...
Click to collapse
Yeah also the new Wallpapers are missing because the leaked is from an S3......
But to your problem :
Did you flash it on your existing rom or did you make a full clean setup ?
Try to flash the leaked WITH pit AND repartition, then flash this with pda over it.
Worked fine on mine and doesnt have the brick bug anymore so feel free to crack
"Try to flash the leaked WITH pit AND repartition, then flash this with pda over it."
Isn't that what people warn you about?
Anyway, I tried some CM 10.1 nightly and it also doesn't have the vibration anymore, so i will just let samsung repair it. Still one month of warranty left.
zippocat said:
"Try to flash the leaked WITH pit AND repartition, then flash this with pda over it."
Isn't that what people warn you about?
Anyway, I tried some CM 10.1 nightly and it also doesn't have the vibration anymore, so i will just let samsung repair it. Still one month of warranty left.
Click to expand...
Click to collapse
I thought the warning was to make a full wipe with cwm, not when repartition. I never had problems and did it propably 100+ times
Quoting Intratech here:
"5. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
Anyone ask about .pit file is a moron"
Sauce: http://forum.xda-developers.com/showthread.php?t=1075278
zippocat said:
Quoting Intratech here:
"5. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
Anyone ask about .pit file is a moron"
Sauce: http://forum.xda-developers.com/showthread.php?t=1075278
Click to expand...
Click to collapse
I dont know mine worked fine..

[Q] WiFi not working after update via Kies from 4.3. to 4.4.2

Hi there,
i have a rooted S4 i9505 with cwm installed.
yesterday i did an update from stock rom 4.3 to 4.4.2 (I9505XXUEMKE) via KIES.
the problem now....I cant turn on the wifi anymore. whenever i try to use the on/off switch for the wifi it instandly switches back to off.
is anyone else experiencing the same problem? has someone already a solution for that, before i will do a factory reset.
SDA1979 said:
Hi there,
i have a rooted S4 i9505 with cwm installed.
yesterday i did an update from stock rom 4.3 to 4.4.2 (I9505XXUEMKE) via KIES.
the problem now....I cant turn on the wifi anymore. whenever i try to use the on/off switch for the wifi it instandly switches back to off.
is anyone else experiencing the same problem? has someone already a solution for that, before i will do a factory reset.
Click to expand...
Click to collapse
hmm - shouldn't really be a problem if you flashed stock, but broken wifi is a symptom reported when flashing old modem on new bootloader, if you have new stock sammy 4.4 then you will surely have new bootloader (check though by putting your phone into download mode and then check for KNOX references - if you got them you got new bootloader, if no then you are on the old one)
Click on the link in my sig for modem - that will take you to a thread that has all the newest modems - have a look through the most recent last 3-4 pages and you will find packages for modems for new bootloader, flash one of these and see what happens - BTW you need to flash in odin with 'reboot' unchecked, then when its finished power off your phone manually then put back into download mode and flash again, then repeat the procedure but this time tick 'reboot' and that should be done. BTW - the tar file goes into 'phone' not csc. You may need to unzip the modem package to get the tar file.
Let us know how you got on
Jimsilver73 said:
hmm - shouldn't really be a problem if you flashed stock, but broken wifi is a symptom reported when flashing old modem on new bootloader, if you have new stock sammy 4.4 then you will surely have new bootloader (check though by putting your phone into download mode and then check for KNOX references - if you got them you got new bootloader, if no then you are on the old one)
Click on the link in my sig for modem - that will take you to a thread that has all the newest modems - have a look through the most recent last 3-4 pages and you will find packages for modems for new bootloader, flash one of these and see what happens - BTW you need to flash in odin with 'reboot' unchecked, then when its finished power off your phone manually then put back into download mode and flash again, then repeat the procedure but this time tick 'reboot' and that should be done. BTW - the tar file goes into 'phone' not csc. You may need to unzip the modem package to get the tar file.
Let us know how you got on
Click to expand...
Click to collapse
ok just to be sure and not bricking my phone..
i went into download mode and it says:
odin mode
product name gt-i9505
current binary custom
system status official
knox kernel lock 0x0
knox warranty void 0x1csb-config-lsb 0x30
write protection enabled
eMMC burst mode enabled
now if i understood right, i have to download
Wifi fix/NON-HLOS - I9505_XXUFNB8_WiFi_FIX
and flash it with odin with the instruction above....
is that correct?
i also found XXUFNB8.... should i rather use this one?
SDA1979 said:
ok just to be sure and not bricking my phone..
i went into download mode and it says:
odin mode
product name gt-i9505
current binary custom
system status official
knox kernel lock 0x0
knox warranty void 0x1csb-config-lsb 0x30
write protection enabled
eMMC burst mode enabled
now if i understood right, i have to download
Wifi fix/NON-HLOS - I9505_XXUFNB8_WiFi_FIX
and flash it with odin with the instruction above....
is that correct?
i also found XXUFNB8.... should i rather use this one?
Click to expand...
Click to collapse
Its correct
SDA1979 said:
ok just to be sure and not bricking my phone..
i went into download mode and it says:
odin mode
product name gt-i9505
current binary custom
system status official
knox kernel lock 0x0
knox warranty void 0x1csb-config-lsb 0x30
write protection enabled
eMMC burst mode enabled
now if i understood right, i have to download
Wifi fix/NON-HLOS - I9505_XXUFNB8_WiFi_FIX
and flash it with odin with the instruction above....
is that correct?
i also found XXUFNB8.... should i rather use this one?
Click to expand...
Click to collapse
you are on the new bootloader so you can flash the complete package - it has everything in it all in one package! - you won't brick your phone even if you flash the wrong modem, that is unless you did some thing real dumb like flash i9500 modem and even then I think its recoverable not that I suggest you try!!
depends where you are in the world - I used NB8 and it worked well for me in the UK - I'm on NB9 now and that seems nice also.
so to be clear flash this:
Combined package
For NewBootloader
GSM_Modem_XXUFNB8_and_LTE_Modem_XXUFNB8
https://mega.co.nz/#!3dR30JiT!cP5WrUCfz9L4h8doY7KTTV6fq4pFL85EkJBG6T-Gqhc
Jimsilver73 said:
you are on the new bootloader so you can flash the complete package - it has everything in it all in one package! - you won't brick your phone even if you flash the wrong modem, that is unless you did some thing real dumb like flash i9500 modem and even then I think its recoverable not that I suggest you try!!
depends where you are in the world - I used NB8 and it worked well for me in the UK - I'm on NB9 now and that seems nice also.
so to be clear flash this:
Combined package
For NewBootloader
GSM_Modem_XXUFNB8_and_LTE_Modem_XXUFNB8
https://mega.co.nz/#!3dR30JiT!cP5WrUCfz9L4h8doY7KTTV6fq4pFL85EkJBG6T-Gqhc
Click to expand...
Click to collapse
hey guys, thank you!!!
the Wi-Fi is working again.
Nonetheless i still have one problem remaining, which i thought it would have been fixed as well.
but, when GPS is turned on, it tries to find the GPS position and the icon on the status bar continues appearing and disappearing permanently (every half of a second).
Beside the fact that it is really annoying having this icon flashing all the time it also causes the display to freeze.
Especially when scrolling from top to the bottom to open the notification area.
It sometimes also lets the system crush completely.
any idea what this could be?
thanks for your effort so far.
SDA1979 said:
hey guys, thank you!!!
the Wi-Fi is working again.
Nonetheless i still have one problem remaining, which i thought it would have been fixed as well.
but, when GPS is turned on, it tries to find the GPS position and the icon on the status bar continues appearing and disappearing permanently (every half of a second).
Beside the fact that it is really annoying having this icon flashing all the time it also causes the display to freeze.
Especially when scrolling from top to the bottom to open the notification area.
It sometimes also lets the system crush completely.
any idea what this could be?
thanks for your effort so far.
Click to expand...
Click to collapse
hmmm......... thats not right!
Suggest you find a stock sammy ROM and flash anew in odin - then root using cf root, then flash recovery - (TWRP is very good :good then go into recovery and wipe cache, dalvik, system and data - reboot and see what happens on nice new shiny sammy stock - if all is good pick the ROM/kernel you want (if you want) and go back to odin to reflash modem.
The only other thing I can think is that you have an app that is messing with gps?? Do the above though and you should be golden :good:
EDIT: don't wipe system unless you planning flashing a different ROM through recovery!
Jimsilver73 said:
hmmm......... thats not right!
Suggest you find a stock sammy ROM and flash anew in odin - then root using cf root, then flash recovery - (TWRP is very good :good then go into recovery and wipe cache, dalvik, system and data - reboot and see what happens on nice new shiny sammy stock - if all is good pick the ROM/kernel you want (if you want) and go back to odin to reflash modem.
The only other thing I can think is that you have an app that is messing with gps?? Do the above though and you should be golden :good:
Click to expand...
Click to collapse
Hi, right way to flash the stock Samsung package, but after flashing a custom recovery, do not wipe system. There's no ROM after that so phone will not boot. And the newest modem is integrated in the stock package, so no need to flash it again.
And another advice: NEVER use Kies to update your phone. It has bricked 3 of mines.:cyclops:
speedwayfan75 said:
Hi, right way to flash the stock Samsung package, but after flashing a custom recovery, do not wipe system. There's no ROM after that so phone will not boot. And the newest modem is integrated in the stock package, so no need to flash it again.
And another advice: NEVER use Kies to update your phone. It has bricked 3 of mines.:cyclops:
Click to expand...
Click to collapse
Oops, well spotted! Yes, don't wipe system unless you have another ROM to flash through recovery. 3 phones bricked from kies huh? I never used it SVD don't think I ever will lol. Good old Sammy stock stuff, tbh that's why I steer well clear of anything stock Sammy unless absolutely necessary and last resort - I look at the farce they have made by forcing us to accept Knox pox!
Jimsilver73 said:
Oops, well spotted! Yes, don't wipe system unless you have another ROM to flash through recovery. 3 phones bricked from kies huh? I never used it SVD don't think I ever will lol. Good old Sammy stock stuff, tbh that's why I steer well clear of anything stock Sammy unless absolutely necessary and last resort - I look at the farce they have made by forcing us to accept Knox pox!
Click to expand...
Click to collapse
my thought was to go into recovery mode and wipe everything and start from beginning in order to exclude that it could depends on some wrong settings or any software already installed....
I updated to 4.4.2 using Mobile Odin and my wifi was borked too.
I did notice after the update that there was a mismatch between my Baseband version (still the old 4.3 XXUEMKE) and the Build number XXUFNB8, and I recall seeing some message during the flashing process that security had blocked the kernel update and Triangle Away might help solve it.
I therefore ran Triangle Away to reset my flash counter, and then used Mobile Odin to have a second go at flashing just the Kernel, Recovery and Modem parts.
This was successful and I now have matching Baseband and Build, both XXUFNB8.
And my wifi now works again...
ok.. after making a factory reset wifi and gps are working fine again.
guess there was some missconfigured third party app...
but now, with a fresh system i do not understand why i am not able to assign a PIN for my lockscreen...
everything is greyed out except PIN and Password.
but even though setting up a PIN, the screen lock is always set to use Swipe......
damn, i shouldnt have updated to 4.4.2.... until now.. only problems with this new build....
SDA1979 said:
ok.. after making a factory reset wifi and gps are working fine again.
guess there was some missconfigured third party app...
but now, with a fresh system i do not understand why i am not able to assign a PIN for my lockscreen...
everything is greyed out except PIN and Password.
but even though setting up a PIN, the screen lock is always set to use Swipe......
damn, i shouldnt have updated to 4.4.2.... until now.. only problems with this new build....
Click to expand...
Click to collapse
Try slimkat 3.2 from here http://www.slimroms.net/index.php/downloads/dlsearch/viewcategory/909-jfltexx remember to download gapps and flash after you have flashed ROM. You won't be disappointed
Jimsilver73 said:
Try slimkat 3.2 from here http://www.slimroms.net/index.php/downloads/dlsearch/viewcategory/909-jfltexx remember to download gapps and flash after you have flashed ROM. You won't be disappointed
Click to expand...
Click to collapse
hey thanks for your suggestion. but i want to keep using the stock rom. sufficent for my needs....
anyway.. finally i was able to get everything working after flashing the rom with odin again.
Jimsilver73 said:
hmm - shouldn't really be a problem if you flashed stock, but broken wifi is a symptom reported when flashing old modem on new bootloader, if you have new stock sammy 4.4 then you will surely have new bootloader (check though by putting your phone into download mode and then check for KNOX references - if you got them you got new bootloader, if no then you are on the old one)
Click on the link in my sig for modem - that will take you to a thread that has all the newest modems - have a look through the most recent last 3-4 pages and you will find packages for modems for new bootloader, flash one of these and see what happens - BTW you need to flash in odin with 'reboot' unchecked, then when its finished power off your phone manually then put back into download mode and flash again, then repeat the procedure but this time tick 'reboot' and that should be done. BTW - the tar file goes into 'phone' not csc. You may need to unzip the modem package to get the tar file.
Let us know how you got on
Click to expand...
Click to collapse
I feel compelled to express my gratitude for the post. Two days ago i updated from 4.3 to 4.4.2 on my rooted gt-i9505 via KIES and just like that no more wifi. This solution works like charm!!!
:good::good::good::good::good::good:

Problem [.205][Update- 19.06.14] UItimate PureXSP V3

Hi,
I have some problem for updating from 2.3 to 3 version of UItimate PureXSP, in Recovery I have this errore message: "symlinks failed status 7". Then the cell goes to brick and I have again to flash a stock firmware.
rolhand73 said:
Hi,
I have some problem for updating from 2.3 to 3 version of UItimate PureXSP, in Recovery I have this errore message: "symlinks failed status 7". Then the cell goes to brick and I have again to flash a stock firmware.
Click to expand...
Click to collapse
try to redownload it
Hey Guys,
I have a problem too...After updating to V3/V3.1/V3.2 is the album.apk broken and it close every time..
Can you help me pls?
1: Open a Q&A thread in the Q&A section
2: Search
You can also try replacing album.apk with some found on forum. (themes and apks)
How to disable lockscreen auto rotate on V3.2 ?
I have problem too
But because I havent 10 post I cannot replay that topic
My problem is that wifi turn off but itself without any reason but if I go to setting wifi section wifi isnt off I mean button but its disconnected from my wifi then when I go to see wifi network list my wifi is there and has wrote there saved password and then it connects itself again without that I do anything I didnt have this problem before and also I use my wifi on labtop all the time without any disconnecting so im sure its the problem from firmwere and also problem isnt for my distance of modem I have sit very near to it
And another strange problem is that the buttons bar where the home and back button are there is smaller then real firmwere that I had before I mean its wide is less
And another thing that the reset system Ui app crashes when I try to open it plz help about all these problems
And im so sorry for my very bad english!!
Kedzior87pl said:
How to disable lockscreen auto rotate on V3.2 ?
Click to expand...
Click to collapse
You can probably do this in xperia xposed app...in xperia home section > screen orientation > uncheck it
@rolhand73
Before flashing the rom update to the latest recoveries for
locked bl from here
http://forum.xda-developers.com/showthread.php?t=2649923
@Kedzior87pl
I have fixed it.and i will release the update in 2-3 days @mrhdir
Wifi problem not related to the rom
dipesh1502 said:
@rolhand73
Before flashing the rom update to the latest recoveries for
locked bl from here
http://forum.xda-developers.com/showthread.php?t=2649923
@Kedzior87pl
I have fixed it.and i will release the update in 2-3 days @mrhdir
Wifi problem not related to the rom
Click to expand...
Click to collapse
Thanks for answer, I realy love ur work I never didnt realy do this stuff like installing a rom but I liked what better thing it have
But u didnt answered about the buttons on screen home and back and the otherone that buttons bar have less width than the original firmware I think do you get what I mean? Plz respond about it I realy dont like how it is its narrower then what it should be especially in Chrome it gets worst a black bar come under buttons I dont know what it is but it is bad and ugly thats the only problem that I have plzzzzzzzzzz check this
mrhdir said:
Thanks for answer, I realy love ur work I never didnt realy do this stuff like installing a rom but I liked what better thing it have
But u didnt answered about the buttons on screen home and back and the otherone that buttons bar have less width than the original firmware I think do you get what I mean? Plz respond about it I realy dont like how it is its narrower then what it should be especially in Chrome it gets worst a black bar come under buttons I dont know what it is but it is bad and ugly thats the only problem that I have plzzzzzzzzzz check this
Click to expand...
Click to collapse
I have reduced the size of navigation bar to 36dpi and the stock is 48dpi....check in themes and apps section theres a thread by me various small dpi nav bar.that will work.
dipesh1502 said:
I have reduced the size of navigation bar to 36dpi and the stock is 48dpi....check in themes and apps section theres a thread by me various small dpi nav bar.that will work.
Click to expand...
Click to collapse
hey dude, i,ve got a bad problem with my phone yasterday
once several days ago i flashed that zip for resize my navbar to 44dpi in that topic you have sid that delete one android-res28 blah blah file in that folder but that time because there wasnt such apk with that numbur i didnt deleted any file
than yestedrday i was more i resized that navbar in ann app again i dont remember what app whas it
than i didnt like that size again and i wanted to be on 44dpi again
so i went to flash that zip again and i went to see your tuterial in that topic again but this time i went to that folder and deleted android-res44 and then repoot and flash but, the problem starts here when it got up i installed several app and i use link2sd to link apps when i installed those apps they were linking automatickly to my sd card but when it comes to th last one it errorrs now stroage left on device and when i tryed to link other apps in my phone that werent linked i got that error too i also when try to install new apps get NOT app installed error then i deleted anotherfile from that folder andoid-res follow one on guids to fix app install error but also it didnt work
so now i am with these problems and i think that i should do everything to my phone again: full format,flash stock rom,then root,ten flash your nice rom again then updates and all over again but i though that i ask you this may you have another easier solution becaus its hard for me to do all those again and i also shold format my sd too and make partitions for it too again mabe problem is there

Please !urgent help mobile system deleted!!:( pls

I AM A NOOB IN THIS STUFF . DONT KNOW ANYTHING ELSE EXCEPT ONLY ROOTING.
Im Done .. my Life Ends...
I had A Samsung Galaxy S4 ,
Samsung Galaxy s4
Model = GT-19500
4.3
badband = I9500XXUEMJ8
Kernel ,
3.4.5-1938685
Oct 21 Monday 2013
Build Number
JSS15J.I9500XXUEMJ8
SELINUX STATUs
Enforcing
SEPF_GT-I9500_4.3_0024
It was rooted. recently I tried Adding A ROM for the first time .. Using CWM .. I Followed the steps Mentioned On A Perticular Website ... I dont know whether i can share links here or something....But I guess It Wont help.. Unless I post the link.. Or wait Let me Copy the Rom file mentioned Their To Download and yea I Tried to Update my Andriod 4.3 With Kitkat. . .Rom Of S5. [ Or thats What i wanted to do ]
Rom Link
"CANT ADD URL"
I used Recovery Of Clockward Mod.
Added that Exe File in My Phone. Use Recovery mod [Home+vol up + Lock ] Went their
First noidbackuped and then added Custom Rom. Now Everything was done . I Reeboted . My devide got Bootlooped.. And The Things Went worse when I tried to Finish The bootloop [Stuck at Samsung] by
Perform a full clean-up of the device (This will delete all apps and their settings and game progress). For this:
Select Wipe data/Factory reset, then select Yes on the next screen to confirm factory reset (screenshot).
Select Wipe Cache Partition, then select Yes on the next screen to confirm wiping cache.
it Didnt work .. So I Tried to Restore my Rom .. .Just Went In Back up restore and selected the backed up .rom and Stilll device Softbricked.
Then What i did was Completly ****. I just Was In like Blank Mind . So I FORMATTED MY WHOLE PHONE INCLUDING SYSTEM AND SDCARD0 .. And there , Now I have Nothing but just A CWN RECOVERY MOD ACCES+ ODIN DOESENT RECOGANIZE MY DEVICE IN DOWNLOADING MOD OR ANY .. And when i Try To turn on It just Do Nothing .. And after giving First Samsung GT-I9500 Screen it Just Goes black.. Obv without any System.. So the Problem here is ..
I tried To download my Firmware and Added it in ext Card. And Tried to Install it using Cwm but it was a Odin File..
Please help me How to Restore My Rom .. Or just tell me where to download a suitible custom rom for my Phone .. ? What Number [Model] to check...
All i can Access is to add a Rom in My Sd card and Use Cwm To Install it ..Please Help me . I will really Appreciate it . PLEASE. My Phone.....
I know xda developers Can only Help me .. This Is my last resort...
I KNOW I SUCK IM A NOOB I SHOULDNT TRY THIS STUFF .. But Now i did it. .
If it is still under warranty go to a Samsung service center and act dumb. Tell them something like "I was listening to music and it did that"
Its your last resort
michaels4 said:
If it is still under warranty go to a Samsung service center and act dumb. Tell them something like "I was listening to music and it did that"
Its your last resort
Click to expand...
Click to collapse
isnt There a way ? To Just Install Rom ? I can still acess CWM And If Someone Can tell me A Appropriate Rom File .zip for my Cellphone Ill download it , Add it in Sd card and Then Use CWM To Install that rom ? Its quite Possible ? Please ? Anyone ? help ?
you can't use download mode but you can still enter recovery? that's pretty weird... are you sure you're trying correctly? are the drivers properly installed and stuff? if it still doesn't work, then go to this section of the forum: http://forum.xda-developers.com/galaxy-s4/i9500-develop there you will find plenty of roms you can flash with CWM recovery
-Ric- said:
you can't use download mode but you can still enter recovery? that's pretty weird... are you sure you're trying correctly? are the drivers properly installed and stuff? if it still doesn't work, then go to this section of the forum: http://forum.xda-developers.com/galaxy-s4/i9500-develop there you will find plenty of roms you can flash with CWM recovery
Click to expand...
Click to collapse
I can enter Downloading Mod but The Problem is That There is No /0/System .. In my Mobile . So Computer Dosent Pics up .. I Deleted my sdcard/0/ .. Completely Using CWM so i can only access CWM ..
Hamza09 said:
I can enter Downloading Mod but The Problem is That There is No /0/System .. In my Mobile . So Computer Dosent Pics up .. I Deleted my sdcard/0/ .. Completely Using CWM so i can only access CWM ..
Click to expand...
Click to collapse
Hi mate,
Lets go step by step.....
If you can get into recovery you can get into download...
1. Press and hold Volume Down, Home and Power buttons at the same time.
2. Release the buttons when you get the warning message.
3. Now press Volume Up button to confirm.
after you are in download mode lets flash a stock rom back in you can follow this thread
http://forum.xda-developers.com/showthread.php?t=2265477
or go to sammobile and get the latest one from your country
http://www.sammobile.com/firmwares/
same one you had or newer ,
Another option would be ....
Take external sd out of your phone and use any posible adapter or device so you can use you pc to place a custom rom in....now place it back in your phone and from cwm instal the custom rom...
Stop panicing. This is basic rom flashing.
Just flash a custom rom from within cwm.
michaels4 said:
If it is still under warranty go to a Samsung service center and act dumb. Tell them something like "I was listening to music and it did that"
Its your last resort
Click to expand...
Click to collapse
I can see that you are a new member, but why would you even give him this advice? There is nothing wrong with his phone. Stop giving these advices because it only scares people.
Lennyz1988 said:
Stop panicing. This is basic rom flashing.
Just flash a custom rom from within cwm.
I can see that you are a new member, but why would you even give him this advice? There is nothing wrong with his phone. Stop giving these advices because it only scares people.
Click to expand...
Click to collapse
Allright my Phone Is Back .. But its only Lock Screen that works when i unlock it hangs and gives S voice Stopped working , xxxx stopped working this stopped working etc... ? Now how should i fix this problem ? please Im really thankfull For all of your advise.. i downloaded the Official Firmware From Sam Firmwares and used Odin and Did Intall everything. please ? Tell me what should i do ? now ..
Lennyz1988 said:
Stop panicing. This is basic rom flashing.
Just flash a custom rom from within cwm.
I can see that you are a new member, but why would you even give him this advice? There is nothing wrong with his phone. Stop giving these advices because it only scares people.
Click to expand...
Click to collapse
It is better to go to Samsung he might get a new s4

Resources