[Q] HELP!!! - Defy Q&A, Help & Troubleshooting

i had rooted the defy+ & installed cm7(i think because it had been a long time ago) for my friend
my friend did a reset on the phone since it was slowing down...
i think it has bricked...
because it doesn't turn on also
he got it checked at the service center, they said they have to change its motherboard
i doubt that....
i think the battery is dead too
will it charge even if the phone is bricked???
now how do i restore the phone back to stock????
any kind of suggestions will be appreciated

Use the Motorola factory cable guide to make the cable which should get you to the boot loader if your motherboard is fine
Sent from my Nexus 5 using Tapatalk

thekguy said:
Use the Motorola factory cable guide to make the cable which should get you to the boot loader if your motherboard is fine
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Pressing the power & volume down button wil take me to the bootloader right?
nothing seems to happen
the screen doesn't lit up also

mclerenef1 said:
Pressing the power & volume down button wil take me to the bootloader right?
nothing seems to happen
the screen doesn't lit up also
Click to expand...
Click to collapse
it's turn off (take the battery out if it's getting stuck at boot to make sure) then hold down power and vol UP to get to the boot loader

If you get no response with factory cable, your device may be hard bricked
Sent from my Nexus 5 using Tapatalk

mclerenef1 said:
i think the battery is dead too
will it charge even if the phone is bricked???
Click to expand...
Click to collapse
Try the McGyver method from here:
http://forum.xda-developers.com/showthread.php?t=1828639

thekguy said:
Use the Motorola factory cable guide to make the cable which should get you to the boot loader if your motherboard is fine
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
could u please explain it???
i have asked my friend to get the cable
is there a link that you can post??
EDIT: battery is charging via usb now
THANKS to @sevenrock

is it possible that the bootloader could be deleted???
because i was goin through some threads
twrp erased the internal storage along with the bootloader
thats what he claims...
just curious...
is dat possible?
btw i left the phone overnight connected(not the original moto cable, used sony cable) to my macbook pro(running win 8.1)
still the same
in rsd lite nothing shows up even after pressing down power+volume up

The McGyver method is very dangerous I would have sugested you not to use it because in my case I will never have the possibility of charging my phone via usb cable but with an universal charger and it can't be reverted so you are warned now,
Are you sure your battery is now charged to enter bootloader? It can't be erased, if not, then charge your battery with an universal charger then try to enter bootloader
Sent from my MB526 using Tapatalk

DiegoxG said:
The McGyver method is very dangerous I would have sugested you not to use it because in my case I will never have the possibility of charging my phone via usb cable but with an universal charger and it can't be reverted so you are warned now,
Are you sure your battery is now charged to enter bootloader? It can't be erased, if not, then charge your battery with an universal charger then try to enter bootloader
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
If that's the case them I will ask him to buy those external chargers or check if his friends have the same phone
& get the battery charged

guys
looks like the battery is charged
still not able to go into bootloader
it got recognized when i connected to the laptop
it also got recognized rsd lite
hav attached screenshots
please take a look & help me out
can i just flash it?

Try a flash, if you have a black screen after flash try a bl7 sbf(dfp 231)
You can also try ticking ti omap blank flash in rsd
Sent from my Nexus 5 using Tapatalk

thekguy said:
Try a flash, if you have a black screen after flash try a bl7 sbf(dfp 231)
You can also try ticking ti omap blank flash in rsd
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Omap blank flash?
Can u provide a link please?

It's an option in rsd lite
Sent from my Nexus 5 using Tapatalk

thekguy said:
It's an option in rsd lite
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
after seeing thekguy mentioning abt dfp 231 i just remembered that i had flashed that sbf when i had rooted the phone
the phone booted after flashing bl7 sbf(dfp 231)
i guess the phone was bricked
& when it gets bricked... it goes to bootloader i guess
because i didnt have to press any buttons to go into bootloader
i just connected to rsd lite & flashing started & the screen lit up saying "SW update in progress"
Thank you guys for all the help & suggestons:good:

thekguy said:
Try a flash, if you have a black screen after flash try a bl7 sbf(dfp 231)
You can also try ticking ti omap blank flash in rsd
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I you have a bootloop , could not get into a recovery haven't a rooted devive with usb debugging on , first try a factory reset from stock recovery.....before & after sbf flash
p.s.: nice to see nearly unbrikable defy once more
one of the forum rules tells us first read and use search function to keep threads clean because of things happen again and again and again
nothing for bad. ...
cheers
Sent from my MB525 red , froyo 2.2.2 german blurless service.sbf, as stock rom

Related

[Q] bricked droid x

I have searched through the threads and none have helped. I have a droid x wich was rooted. I tried unroot and bricked my droid. I can access bootload and have tried to flash numerous sbf files with rsdlite. I keep getting a load fail and and error code 1337 510b. is there any help or am i screwed.
Your phone has to be on in boot loader mode to attempt an SBF.
If your phone won't turn on in any form, your battery may be dead. Try charging your battery via a spliced cord, or try to get your hands on a charged Droid X battery to use.
Sent from my Galaxy Nexus using Tapatalk 2
I get it into boot load. i get the usb conected. i start rsd lite some of the sbf files i load to rsd get an error image missing. when I get one to load and I flash then phone comes back with error 1337 and 510b
Redownload the sbf and check the md5 sum along with that. Then uninstall rsd lite, reboot the computer, and reinstall the newest version. I think the version I have is above 5.0 so look for something like that. Also make sure the battery is plenty charged.
You may have to try several different versions of RSD Lite to find one that works well.
Sent from my Galaxy Nexus using Tapatalk 2
I got one sbf to work. now phone boots, but goes into a new unactivated screen and tells me to call a number. also my battery is not recognized. i guess I am headed in the right direction. thanks for the advice will keep at it. stuck at activation screen
kenc18901 said:
I got one sbf to work. now phone boots, but goes into a new unactivated screen and tells me to call a number. also my battery is not recognized. i guess I am headed in the right direction. thanks for the advice will keep at it. stuck at activation screen
Click to expand...
Click to collapse
Tap the four corners of the screen to bypass the activation screen.
Sent from my Galaxy Nexus using Tapatalk 2
battery not recognized
Cool thanks, one more problem, the battery is not being recognized. Could that be the wrong .sbf? would flashing a rom fix this?
got somewhere
Here is where I am . I got a .sbf for droid x but couldn't get it to root. I flashed a milestone x sbf then rooted that with superoneclick, then installed my backup rom of liberty and I believe that I am back to where I started before I bricked. The only new problem is that my battery is showing a ? and will not charge. I spliced a usb cord to the battery to fool the phone into thinking it was charged so that I could get into bootloader. On another thread it was suggested that if you do that to your battery that it is possibly fried. Any thoughts?
Did you try wiping battery stats?
yes, if you mean by going through the recovery menu. Holding down the power+menu button and getting into that mode.
Did you try a new battery?
? battery
Not yet. that is my next option. Just wanted to send out some feelers and check my options. I will post outcome after I do. Maybe this will help someone else in there trouble shooting.
? for battery
Received new battery. Battery status still showing ?. I am out of ideas.
kenc18901 said:
Received new battery. Battery status still showing ?. I am out of ideas.
Click to expand...
Click to collapse
The battery has to be charged. It may not have arrived in fully charged state.
Sent from my Galaxy Nexus using Tapatalk 2
Battery charged still getting a ? for battery status, will not charge. led lights when I plug it in.

[Q] Defy bricked,only white LED

I've tried everything.The phone does not turn on at all,can't go into bootloader or recovery mode,only white LED light on when connected to pc.When i connected it for the first time to my PC (i have the drivers) windows showed "Motorola flash device" and was installing the drivers for it then the phone disconnected,windows was saying "Device unplugged!".Every time i connect it to the PC,nothing happens.If i press the power key,the PC makes that sound that it connects,then after 2 seconds it disconnects.I have to take the battery out and put it back in to make the PC connect to it again,disconnect after 2 seconds.I tried holding volume up and connecting,no luck,RDS does not read the device,tried with "First come first served" mode,nothing.The battery was a bit swollen so i brought a new one,both charged,no luck.The phone is bricked.What can i do?please help!
rammstein_08 said:
I've tried everything.The phone does not turn on at all,can't go into bootloader or recovery mode,only white LED light on when connected to pc.When i connected it for the first time to my PC (i have the drivers) windows showed "Motorola flash device" and was installing the drivers for it then the phone disconnected,windows was saying "Device unplugged!".Every time i connect it to the PC,nothing happens.If i press the power key,the PC makes that sound that it connects,then after 2 seconds it disconnects.I have to take the battery out and put it back in to make the PC connect to it again,disconnect after 2 seconds.I tried holding volume up and connecting,no luck,RDS does not read the device,tried with "First come first served" mode,nothing.The battery was a bit swollen so i brought a new one,both charged,no luck.The phone is bricked.What can i do?please help!
Click to expand...
Click to collapse
had the same problem, the escape was JORDN_U3_97.21.51.........................sbf flashed throw RSD lite.
Mine was green lens DEFY
ovu85 said:
had the same problem, the escape was JORDN_U3_97.21.51.........................sbf flashed throw RSD lite.
Mine was green lens DEFY
Click to expand...
Click to collapse
the problem is that RSD lite does not recognize the phone no matter what i do.any suggestions?
Maybe your battery is dead, try mcgiver
http://forum.xda-developers.com/showthread.php?t=892026
Feche said:
Maybe your battery is dead, try mcgiver
http://forum.xda-developers.com/showthread.php?t=892026
Click to expand...
Click to collapse
charged old battery with universal phone battery charger,nothing.got new battery,nothing.
this happened to me once, rsdlite would not recognise it etc etc. I am not sure how I fixed it, but I did end up getting it working so don't give up.
Try uninstalling and then installing the latest version of rsdlite
Also try and use a different computer.
Try downloading drivers for your defy off the internet - im sure you will find them somewhere
and lastly, use the search function in other threads, maybe someone else has had the same problem...........
I actually had this on saturday night.
I used MacGyver to charge my battery, and just kept using different RSDLite versions until it detected my phone Make sure you're using the right SBF too.. http://sbf.droid-developers.org/umts_jordan/list.php
tried mcgyver,tried other RSD versions,installed defy drivers,still nothing.Disconnects after 2 seconds,before RSD has a chance to read it
rammstein_08 said:
tried mcgyver,tried other RSD versions,installed defy drivers,still nothing.Disconnects after 2 seconds,before RSD has a chance to read it
Click to expand...
Click to collapse
Tell you what, maybe you should jump on ebay and buy another battery? I bought one that comes with a seperate charger. this way you know that you have a charged battery in your device.
Also try a different usb cable? I have so many that stop working or only work when you physically push them in or to an angle.
have you tired a second computer?
naleyb01 said:
Tell you what, maybe you should jump on ebay and buy another battery? I bought one that comes with a seperate charger. this way you know that you have a charged battery in your device.
Also try a different usb cable? I have so many that stop working or only work when you physically push them in or to an angle.
have you tired a second computer?
Click to expand...
Click to collapse
got a new genuine battery from ebay,tried different cable and laptop,same result.my guess hardware problem..also,if phone stays plugged in the USB for 5 minutes or so,the pc makes that connected/disconnected sound again.
me too
I have the same problem with Red lens Defy MB525 . Only black screen and white led when cable connected with PC . Now can using RSD for flash rom but after PASS ( too quickly ) , not anything . Sorry , my bad Englissh .
Any ideas!?
Bé Yêu said:
I have the same problem with Red lens Defy MB525 . Only black screen and white led when cable connected with PC . Now can using RSD for flash rom but after PASS ( too quickly ) , not anything . Sorry , my bad Englissh .
Any ideas!?
Click to expand...
Click to collapse
Possibly trying to flash wrong SBF for your bootloader version?
What other SBFs have you flashed?
Don't worry !
Just flash rom bl7.sbf againts !
Try flash rom BL7
pls help me....defy stuck at black screen....
rsd lite recognises defy through factory cable but while flashing sbf it gives error sending ti rom packets and den it fails.....my stock rom was froyo india.....pls help.....
rahul_saklani said:
rsd lite recognises defy through factory cable but while flashing sbf it gives error sending ti rom packets and den it fails.....my stock rom was froyo india.....pls help.....
Click to expand...
Click to collapse
This may happen when u flash wrong sbf . Here's the link to all sbf's of defy and defy match it and then flash. I too had problems i and flashed this.. I am from india as well send me a pm if you got any doubts would try to help you at the best
Enjoy.!
---------- Post added at 08:55 AM ---------- Previous post was at 08:50 AM ----------
Bé Yêu said:
I have the same problem with Red lens Defy MB525 . Only black screen and white led when cable connected with PC . Now can using RSD for flash rom but after PASS ( too quickly ) , not anything . Sorry , my bad Englissh .
Any ideas!?
Click to expand...
Click to collapse
Ya its comman if u flash wrong sbf....Match the sbfs then flash...Link to all sbf's of defy and defy plus
Send me a pm if u have any doubt
Enjoy
vedang81 said:
This may happen when u flash wrong sbf . Here's the link to all sbf's of defy and defy match it and then flash. I too had problems i and flashed this.. I am from india as well send me a pm if you got any doubts would try to help you at the best
Enjoy.!
---------- Post added at 08:55 AM ---------- Previous post was at 08:50 AM ----------
Ya its comman if u flash wrong sbf....Match the sbfs then flash...Link to all sbf's of defy and defy plus
Send me a pm if u have any doubt
Enjoy
Click to expand...
Click to collapse
RSD Lite recognises my phone:
Status: connected...
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: N/A
DRM Version: N / A
everything is N/A.....wat does it imply? is the motherboard corrupted...hav i lost my defy? every sbf file i try it fails with error... failed flashing processPhone[0000].Eroor sending TIROM packet request API Error: 0xE003009F(0xE003109F);phone connected
pls help me....my defy is dead since past 2 months
rahul_saklani said:
RSD Lite recognises my phone:
Status: connected...
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: N/A
DRM Version: N / A
everything is N/A.....wat does it imply? is the motherboard corrupted...hav i lost my defy? every sbf file i try it fails with error... failed flashing processPhone[0000].Eroor sending TIROM packet request API Error: 0xE003009F(0xE003109F);phone connected
pls help me....my defy is dead since past 2 months
Click to expand...
Click to collapse
N/A doesn't mean ur motherboard is corrupted. Even when i connect it shows N/A..
Try starting everything again uninstalling and installing drivers and rsd. Better switch pc and try.
Sent from my Android lappy
vedang81 said:
N/A doesn't mean ur motherboard is corrupted. Even when i connect it shows N/A..
Try starting everything again uninstalling and installing drivers and rsd. Better switch pc and try.
Sent from my Android lappy
Click to expand...
Click to collapse
i've tried all that bro....is da flashing failing due to wrong sbf? i guess in ur case it shows da bootloader version but mine is n/a for dat too..... which rom shud i try it if i've accidentally tried to downgrade my rom.... actually i'm asking abt motherboard becoz when i took it to da motorolaservice center they said i've to replace da motherboard but i'm out of warranty ........
rahul_saklani said:
i've tried all that bro....is da flashing failing due to wrong sbf? i guess in ur case it shows da bootloader version but mine is n/a for dat too..... which rom shud i try it if i've accidentally tried to downgrade my rom.... actually i'm asking abt motherboard becoz when i took it to da motorolaservice center they said i've to replace da motherboard but i'm out of warranty ........
Click to expand...
Click to collapse
service centre guys dnt pay dat much attention to this.. they always give this comman solution of changing motherboard... a friend of myn had some problem with his galaxy ace he was too told to replace it...
Ryt nw u just got a option to flash as many sbfs as u can... keep the faith one might work.
Sent from my Android lappy

Droid Pro not being picked up by RSD Lite

I've read just about every thread and no luck. I updated to a CM port by vanillaLVL, and forgot to back up.
I want to use an sbf to go back to 2.3.3 so I can start fresh with a better rom because his rom doesnt have good in call volume and messes up my bluetooth.
So far every thread about fixing RSD Lite will not work for me.
RSD Lite will not recognize my Droid pro, whether I use Bootloader, CWM, or Usb Debugging mode while phone is on. I have tried looking at every fix, but nothing works. Any tips on how to fix RSD Lite, or how to fix my phone to get it back to stock? I tried using update.zips but I always get an error in the build.prop stopping the update.
Cortal said:
I've read just about every thread and no luck. I updated to a CM port by vanillaLVL, and forgot to back up.
I want to use an sbf to go back to 2.3.3 so I can start fresh with a better rom because his rom doesnt have good in call volume and messes up my bluetooth.
So far every thread about fixing RSD Lite will not work for me.
RSD Lite will not recognize my Droid pro, whether I use Bootloader, CWM, or Usb Debugging mode while phone is on. I have tried looking at every fix, but nothing works. Any tips on how to fix RSD Lite, or how to fix my phone to get it back to stock? I tried using update.zips but I always get an error in the build.prop stopping the update.
Click to expand...
Click to collapse
When i BSF mine i used version 5.6, do you have Moto drivers installed? also just in case make sure you are using a 32 bits version of Windows
I think my windows is 32 bit, and I dled the newest Motorola drivers from the site, but still doesn't work :/ my phone can't access stock recovery either, so might that be causing the issue?
Sent from my DROID Pro using Xparent Red Tapatalk 2
Cortal said:
I think my windows is 32 bit, and I dled the newest Motorola drivers from the site, but still doesn't work :/ my phone can't access stock recovery either, so might that be causing the issue?
Sent from my DROID Pro using Xparent Red Tapatalk 2
Click to expand...
Click to collapse
Hey dude... Okay to start off ill tell you what you need... you need to download the base drivers from motorola and have a 32 bit windows computer... What you want to do from there is uninstall your previous drivers... reboot your pc then install them... reboot your pc... now comes the tricky part... take your droid and hold down the volume keys and the button on the right side of your phone and while holding all thoes down hold the power down too .. wait about 30 secs or till the lcd slightly lites up and let go a simple menu should pop up on your phone... now plug in your phone and wait for 10 min if nothing shows up unplug it and plug it in with a different cord and if nothing pops up in 5 min open rsd lite and your phone should show up... now browse to your .sbf or your .sbf.zip and start the flashing process (just click start)..... tell me if this works please!!!
Sent from my DROID Pro using xda app-developers app
Hate to sound amateur but sometimes its just the specific computer. I bricked my xprt at my friends house and tried to sbf it with his 32 win 7 laptop and the drivers kept failing.
Sent from my Nexus 7 using xda app-developers app

Bricked Phone! - Dead - NEED HELP!!

Hi guys, I'm gonna tell you what happened with my S4 to see if you can help me.
I got a MetroPCS Galaxy S4 (SGH-M919N) then I went to a tech and unlocked it. After 2 days the screen started blinking in pink color and I decided to flash it with a stock ROM from T-Mobile (SGH-M919-TMB-M919UVUAMDL-1366964131) using ODIN. Everything was great, in a couple of days the screen went kinda black (No brightness at all) I could barely see it. In this state with the phone turned off and tried to plug in to the PC or charge it and started blinking in green color. I decided once again to flash it with the stock ROM mentioned above but the phone won't enter in recovery or download mode after that I tried to flash it with the CyanogenMOD Installer......everything was OK but it stuck in about 75%, left the phone connected for 20min aprox and nothing happened. I unplugged it and tried to turn it on (It vibrates but I get no startup sound, logo, boot, anything!) ODIN doesn't recognized anymore, can't enter in recovery or download.
I tried to reboot download with ADB to flash it with ODIN but usb debugging is not enabled and ADB commands doesn't work.
I don't know what to do with my S4, I hope you guys can help me. I'm not in the US so I can't return it for replacement.
I hope to hear from you soon. THANKS IN ADVANCE.
chure63 said:
Hi guys, I'm gonna tell you what happened with my S4 to see if you can help me.
I got a MetroPCS Galaxy S4 (SGH-M919N) then I went to a tech and unlocked it. After 2 days the screen started blinking in pink color and I decided to flash it with a stock ROM from T-Mobile (SGH-M919-TMB-M919UVUAMDL-1366964131) using ODIN. Everything was great, in a couple of days the screen went kinda black (No brightness at all) I could barely see it. In this state with the phone turned off and tried to plug in to the PC or charge it and started blinking in green color. I decided once again to flash it with the stock ROM mentioned above but the phone won't enter in recovery or download mode after that I tried to flash it with the CyanogenMOD Installer......everything was OK but it stuck in about 75%, left the phone connected for 20min aprox and nothing happened. I unplugged it and tried to turn it on (It vibrates but I get no startup sound, logo, boot, anything!) ODIN doesn't recognized anymore, can't enter in recovery or download.
I tried to reboot download with ADB to flash it with ODIN but usb debugging is not enabled and ADB commands doesn't work.
I don't know what to do with my S4, I hope you guys can help me. I'm not in the US so I can't return it for replacement.
I hope to hear from you soon. THANKS IN ADVANCE.
Click to expand...
Click to collapse
Is the battery working ok? Does the LED go red when charger is plugged in as normal?
What happens when you try to boot to recovery?
If your screen start blinking pink and after that turning black, why do assume it's a software problem? No rom would cause that. It's clearly a hardware failure.
RossFixxed said:
Is the battery working ok? Does the LED go red when charger is plugged in as normal?
What happens when you try to boot to recovery?
Click to expand...
Click to collapse
The battery is OK, I tested it already with another phone. The LED doesn't turn on when the charger is plugged in. When I try to enter to recovery it vibrates but nothing else happens (Black Screen).
Lennyz1988 said:
If your screen start blinking pink and after that turning black, why do assume it's a software problem? No rom would cause that. It's clearly a hardware failure.
Click to expand...
Click to collapse
The screen would cause no sound, no LED light, no download or recovery mode, etc..?
Wrong section...
Sent from my GT-I9500 using Tapatalk 4 - Hassan K. Malik
HassanM said:
Wrong section...
Sent from my GT-I9500 using Tapatalk 4 - Hassan K. Malik
Click to expand...
Click to collapse
Where should I post this? Thank you.
chure63 said:
Where should I post this? Thank you.
Click to expand...
Click to collapse
mabye try to use Odin if you can go to Download mode, try to install Android 4.3 with repartition (pit file)... Did you try? Can you go somehow to CWM? If yes, try to format EVERYTHING as possible - system, data etc. than try again method via Odin...
erikasnoske said:
mabye try to use Odin if you can go to Download mode, try to install Android 4.3 with repartition (pit file)... Did you try? Can you go somehow to CWM? If yes, try to format EVERYTHING as possible - system, data etc. than try again method via Odin...
Click to expand...
Click to collapse
I can't get into download or recovery mode.
chure63 said:
I can't get into download or recovery mode.
Click to expand...
Click to collapse
oh god, I didn't have this experience, sorry, I can't help you at all then
Jtag
Jtag?
jd1639 said:
Jtag
Click to expand...
Click to collapse
Hiya I found as a bit of a n00b Jtag painful as a senior member would there be a guide that we could learn from? I wasn't able to find one.:fingers-crossed:
Service center is better idea, since they can't go to download mode to see your phone stil got warranty or not.. just say phone dead ... while In pocket automatically
Generated by Galaxy S4® Octa-Core™ Black-Mambo , Signature not required.©
jd1639 said:
Jtag
Click to expand...
Click to collapse
I don't know much about it. Which box will be helpful to debrick it? Thanks.
chure63 said:
I don't know much about it. Which box will be helpful to debrick it? Thanks.
Click to expand...
Click to collapse
Google mobiletechvideos
Sent from my Nexus 5 using xda app-developers app
95mediatech said:
Service center is better idea, since they can't go to download mode to see your phone stil got warranty or not.. just say phone dead ... while In pocket automatically
Generated by Galaxy S4® Octa-Core™ Black-Mambo , Signature not required.©
Click to expand...
Click to collapse
I'm not in the US....
chure63 said:
I'm not in the US....
Click to expand...
Click to collapse
You don't have to be in the US, it's just going to cost you more in shipping. Maybe you can find someone in your country that can jtag. Try some of the local phone repair shops.
Sent from my Nexus 5 using xda app-developers app
Have you tryed it?
http://forum.xda-developers.com/showthread.php?t=2265477
At the bottom there are some information "how to revive bricked device". Have you tryed it?

Confused if my N9005 is Hard Bricked or not. (help plz)

Here's my story,
I flashed my n9005 with the stock firmware at night. so after flashing complete, like always it was booting up fine and in the booting process the the phone got out of charge and i thought i will charge the next day.
So as i planned i charged it and it wasn't charging, i thought it was a cable or socket problem and i used other chargers but didn't charged.
So i thought it was hard brick and i searched and found some solutions and they said that if i connect my phone to a pc it would show 'qhusb_download mode'.
But when i connect my pc it dosent show any 'qhusb_download mode' in windows or in odin.
So i was thinking if it is bricked or not and what should i do?
Thanks in advance
Is your battery charged ???
have you tried flashing again via Odin
JJEgan said:
Is your battery charged ???
have you tried flashing again via Odin
Click to expand...
Click to collapse
No my battery isn't charged and not charging either.
And I cant turn my phone on.
Repace battery if its dead .Phone cannot boot on a dead battery.
Sent from my SM-N930F using XDA-Developers mobile app
JJEgan said:
Repace battery if its dead .Phone cannot boot on a dead battery.
Sent from my SM-N930F using XDA-Developers mobile app
Click to expand...
Click to collapse
I thought that also but when i connect it to pc and leave it as it is for a while, the back of the phone gets hot.
Can somone plz give me a debrick.img for n9005 lollipop?
here's the link of the file that should be flashed via recovery http://forum.xda-developers.com/attachment.php?attachmentid=2540537&d=1390754238
and here's the link to the post http://forum.xda-developers.com/showthread.php?t=2625332
junnun said:
Can somone plz give me a debrick.img for n9005 lollipop?
here's the link of the file that should be flashed via recovery http://forum.xda-developers.com/attachment.php?attachmentid=2540537&d=1390754238
and here's the link to the post http://forum.xda-developers.com/showthread.php?t=2625332
Click to expand...
Click to collapse
Isn't there anyone who can help me?:crying:
If the phone is getting hot while connected to your computer and charging, there could be something wrong with the battery or the charging circuit.
At least you should try changing the battery.
Sent from my SM-G925F
audit13 said:
If the phone is getting hot while connected to your computer and charging, there could be something wrong with the battery or the charging circuit.
Click to expand...
Click to collapse
I am at least sure that there isn't any problem with the charging circuit.
So I will try changing the battery:good:
Rosli59564 said:
At least you should try changing the battery.
Sent from my SM-G925F
Click to expand...
Click to collapse
Ok.
Be4 u change ur battery i bet u font do others job rather than it. After change ur battery if problem still persists then only second method. If not ur phone will be totally hardbricked.
Sent from my SM-A710F using Tapatalk
I've seen some roms with problems charging the phone while it is turned off. My current rom is like that, I can only charge it when it is turned on, if I try to plug it in when phone is turned off, I will get a charge screen for a second before the phone restarts, or sometimes stays dark and just gets hot.
Try finding a friend with a note 3 and charging your battery in their phone, then when full put back into your phone and boot back into download mode to flash something else.
remove your battery, and charge ur phone, it should boot
try your best to at least boot into download mode
If you are able to do so, good i will give u further instructions.
---------- Post added at 04:09 AM ---------- Previous post was at 04:01 AM ----------
techdude18 said:
remove your battery, and charge ur phone, it should boot
try your best to at least boot into download mode
If you are able to do so, good i will give u further instructions.
Click to expand...
Click to collapse
http://bit.ly/2dHqgjK
Flash this with odin its the official boot md5

Categories

Resources