I've tried everything.The phone does not turn on at all,can't go into bootloader or recovery mode,only white LED light on when connected to pc.When i connected it for the first time to my PC (i have the drivers) windows showed "Motorola flash device" and was installing the drivers for it then the phone disconnected,windows was saying "Device unplugged!".Every time i connect it to the PC,nothing happens.If i press the power key,the PC makes that sound that it connects,then after 2 seconds it disconnects.I have to take the battery out and put it back in to make the PC connect to it again,disconnect after 2 seconds.I tried holding volume up and connecting,no luck,RDS does not read the device,tried with "First come first served" mode,nothing.The battery was a bit swollen so i brought a new one,both charged,no luck.The phone is bricked.What can i do?please help!
rammstein_08 said:
I've tried everything.The phone does not turn on at all,can't go into bootloader or recovery mode,only white LED light on when connected to pc.When i connected it for the first time to my PC (i have the drivers) windows showed "Motorola flash device" and was installing the drivers for it then the phone disconnected,windows was saying "Device unplugged!".Every time i connect it to the PC,nothing happens.If i press the power key,the PC makes that sound that it connects,then after 2 seconds it disconnects.I have to take the battery out and put it back in to make the PC connect to it again,disconnect after 2 seconds.I tried holding volume up and connecting,no luck,RDS does not read the device,tried with "First come first served" mode,nothing.The battery was a bit swollen so i brought a new one,both charged,no luck.The phone is bricked.What can i do?please help!
Click to expand...
Click to collapse
had the same problem, the escape was JORDN_U3_97.21.51.........................sbf flashed throw RSD lite.
Mine was green lens DEFY
ovu85 said:
had the same problem, the escape was JORDN_U3_97.21.51.........................sbf flashed throw RSD lite.
Mine was green lens DEFY
Click to expand...
Click to collapse
the problem is that RSD lite does not recognize the phone no matter what i do.any suggestions?
Maybe your battery is dead, try mcgiver
http://forum.xda-developers.com/showthread.php?t=892026
Feche said:
Maybe your battery is dead, try mcgiver
http://forum.xda-developers.com/showthread.php?t=892026
Click to expand...
Click to collapse
charged old battery with universal phone battery charger,nothing.got new battery,nothing.
this happened to me once, rsdlite would not recognise it etc etc. I am not sure how I fixed it, but I did end up getting it working so don't give up.
Try uninstalling and then installing the latest version of rsdlite
Also try and use a different computer.
Try downloading drivers for your defy off the internet - im sure you will find them somewhere
and lastly, use the search function in other threads, maybe someone else has had the same problem...........
I actually had this on saturday night.
I used MacGyver to charge my battery, and just kept using different RSDLite versions until it detected my phone Make sure you're using the right SBF too.. http://sbf.droid-developers.org/umts_jordan/list.php
tried mcgyver,tried other RSD versions,installed defy drivers,still nothing.Disconnects after 2 seconds,before RSD has a chance to read it
rammstein_08 said:
tried mcgyver,tried other RSD versions,installed defy drivers,still nothing.Disconnects after 2 seconds,before RSD has a chance to read it
Click to expand...
Click to collapse
Tell you what, maybe you should jump on ebay and buy another battery? I bought one that comes with a seperate charger. this way you know that you have a charged battery in your device.
Also try a different usb cable? I have so many that stop working or only work when you physically push them in or to an angle.
have you tired a second computer?
naleyb01 said:
Tell you what, maybe you should jump on ebay and buy another battery? I bought one that comes with a seperate charger. this way you know that you have a charged battery in your device.
Also try a different usb cable? I have so many that stop working or only work when you physically push them in or to an angle.
have you tired a second computer?
Click to expand...
Click to collapse
got a new genuine battery from ebay,tried different cable and laptop,same result.my guess hardware problem..also,if phone stays plugged in the USB for 5 minutes or so,the pc makes that connected/disconnected sound again.
me too
I have the same problem with Red lens Defy MB525 . Only black screen and white led when cable connected with PC . Now can using RSD for flash rom but after PASS ( too quickly ) , not anything . Sorry , my bad Englissh .
Any ideas!?
Bé Yêu said:
I have the same problem with Red lens Defy MB525 . Only black screen and white led when cable connected with PC . Now can using RSD for flash rom but after PASS ( too quickly ) , not anything . Sorry , my bad Englissh .
Any ideas!?
Click to expand...
Click to collapse
Possibly trying to flash wrong SBF for your bootloader version?
What other SBFs have you flashed?
Don't worry !
Just flash rom bl7.sbf againts !
Try flash rom BL7
pls help me....defy stuck at black screen....
rsd lite recognises defy through factory cable but while flashing sbf it gives error sending ti rom packets and den it fails.....my stock rom was froyo india.....pls help.....
rahul_saklani said:
rsd lite recognises defy through factory cable but while flashing sbf it gives error sending ti rom packets and den it fails.....my stock rom was froyo india.....pls help.....
Click to expand...
Click to collapse
This may happen when u flash wrong sbf . Here's the link to all sbf's of defy and defy match it and then flash. I too had problems i and flashed this.. I am from india as well send me a pm if you got any doubts would try to help you at the best
Enjoy.!
---------- Post added at 08:55 AM ---------- Previous post was at 08:50 AM ----------
Bé Yêu said:
I have the same problem with Red lens Defy MB525 . Only black screen and white led when cable connected with PC . Now can using RSD for flash rom but after PASS ( too quickly ) , not anything . Sorry , my bad Englissh .
Any ideas!?
Click to expand...
Click to collapse
Ya its comman if u flash wrong sbf....Match the sbfs then flash...Link to all sbf's of defy and defy plus
Send me a pm if u have any doubt
Enjoy
vedang81 said:
This may happen when u flash wrong sbf . Here's the link to all sbf's of defy and defy match it and then flash. I too had problems i and flashed this.. I am from india as well send me a pm if you got any doubts would try to help you at the best
Enjoy.!
---------- Post added at 08:55 AM ---------- Previous post was at 08:50 AM ----------
Ya its comman if u flash wrong sbf....Match the sbfs then flash...Link to all sbf's of defy and defy plus
Send me a pm if u have any doubt
Enjoy
Click to expand...
Click to collapse
RSD Lite recognises my phone:
Status: connected...
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: N/A
DRM Version: N / A
everything is N/A.....wat does it imply? is the motherboard corrupted...hav i lost my defy? every sbf file i try it fails with error... failed flashing processPhone[0000].Eroor sending TIROM packet request API Error: 0xE003009F(0xE003109F);phone connected
pls help me....my defy is dead since past 2 months
rahul_saklani said:
RSD Lite recognises my phone:
Status: connected...
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: N/A
DRM Version: N / A
everything is N/A.....wat does it imply? is the motherboard corrupted...hav i lost my defy? every sbf file i try it fails with error... failed flashing processPhone[0000].Eroor sending TIROM packet request API Error: 0xE003009F(0xE003109F);phone connected
pls help me....my defy is dead since past 2 months
Click to expand...
Click to collapse
N/A doesn't mean ur motherboard is corrupted. Even when i connect it shows N/A..
Try starting everything again uninstalling and installing drivers and rsd. Better switch pc and try.
Sent from my Android lappy
vedang81 said:
N/A doesn't mean ur motherboard is corrupted. Even when i connect it shows N/A..
Try starting everything again uninstalling and installing drivers and rsd. Better switch pc and try.
Sent from my Android lappy
Click to expand...
Click to collapse
i've tried all that bro....is da flashing failing due to wrong sbf? i guess in ur case it shows da bootloader version but mine is n/a for dat too..... which rom shud i try it if i've accidentally tried to downgrade my rom.... actually i'm asking abt motherboard becoz when i took it to da motorolaservice center they said i've to replace da motherboard but i'm out of warranty ........
rahul_saklani said:
i've tried all that bro....is da flashing failing due to wrong sbf? i guess in ur case it shows da bootloader version but mine is n/a for dat too..... which rom shud i try it if i've accidentally tried to downgrade my rom.... actually i'm asking abt motherboard becoz when i took it to da motorolaservice center they said i've to replace da motherboard but i'm out of warranty ........
Click to expand...
Click to collapse
service centre guys dnt pay dat much attention to this.. they always give this comman solution of changing motherboard... a friend of myn had some problem with his galaxy ace he was too told to replace it...
Ryt nw u just got a option to flash as many sbfs as u can... keep the faith one might work.
Sent from my Android lappy
Related
Hello everyone !
This is my first ever post in this forum ,though i have learned alot from this forum .
Few days back i successfully rooted my phone and after that flashed custom rom without having back up of factory Rom but during this process my mobile stuck .
RSD was unable to detect my phone neither i was able to completely charge my battery.
Last day i came across the link
http://forum.xda-developers.com/showthread.php?t=892026
and set up everything as it is shown there.
Successfully flashed ROM UK Retail 2.2.2 Service sbf (Build number: JRDNEM_U3_3.4.2_177-003)
http://and-developers.com/sbf:defy
Phone was up but with warning message battery is invalid ,can't charged the battery.
I reflashed the ROm in hope that it will solve my problem but all was in vain .
When battery is fully drained ,i connect my mobile via usb .It boots up successfully but fails to recognize my battery showing a question mark on battery meter.
I can charge my battery via external USB .
Help me please !
Moto_defy said:
Hello everyone !
This is my first ever post in this forum ,though i have learned alot from this forum .
Few days back i successfully rooted my phone and after that flashed custom rom without having back up of factory Rom but during this process my mobile stuck .
RSD was unable to detect my phone neither i was able to completely charge my battery.
Last day i came across the link
http://forum.xda-developers.com/showthread.php?t=892026
and set up everything as it is shown there.
Successfully flashed ROM UK Retail 2.2.2 Service sbf (Build number: JRDNEM_U3_3.4.2_177-003)
http://and-developers.com/sbf:defy
Phone was up but with warning message battery is invalid ,can't charged the battery.
I reflashed the ROm in hope that it will solve my problem but all was in vain .
When battery is fully drained ,i connect my mobile via usb .It boots up successfully but fails to recognize my battery showing a question mark on battery meter.
I can charge my battery via external USB .
Help me please !
Click to expand...
Click to collapse
Reflash with RSD the bigger sbf 3.43 which you find (177-009). after flashing do a factory reset.
pgreed said:
Reflash with RSD the bigger sbf 3.43 which you find (177-009). after flashing do a factory reset.
Click to expand...
Click to collapse
I have flashed three variants of official sbf but still i'have the same problem
Flash Walter batt patch
Patch doesn't help
pgreed said:
Flash Walter batt patch
Click to expand...
Click to collapse
Sorry for being late .
I have flashed every patch but still have the same problem.
Right now i have CM9 kernel 2.6.32.9 .One of the interesting thing i noted is that custom boot loader shows the right battery status but android battery says "unknown 100%" .At first i thought i had green lense but later via defylense app i came to know that i have red lens(it may be erroneous because i have already patched red lens batt fix files) .Few days back i tried dual boot Cm9 and Cm7 but none of them recognized my battery.
Please help me ......
Moto_defy said:
Sorry for being late .
I have flashed every patch but still have the same problem.
Right now i have CM9 kernel 2.6.32.9 .One of the interesting thing i noted is that custom boot loader shows the right battery status but android battery says "unknown 100%" .At first i thought i had green lense but later via defylense app i came to know that i have red lens(it may be erroneous because i have already patched red lens batt fix files) .Few days back i tried dual boot Cm9 and Cm7 but none of them recognized my battery.
Please help me ......
Click to expand...
Click to collapse
I think that you has flashed a sbf with a not optimal BL (eg. you flashed a BL7 or so). For this kind of problem already exist a good topic.
link ?
pgreed said:
I think that you has flashed a sbf with a not optimal BL (eg. you flashed a BL7 or so). For this kind of problem already exist a good topic.
Click to expand...
Click to collapse
link to that thread plz ?
Facing the same problem too!!!! Any solutions :cyclops:
LINK PLS !
Motorola Defy MB525 battery unknown
Same problem here. My Defy was working fine until I installed 0404 Quarx build. Then after a few hours installing and setting up my apps back I did a reboot and the got stuck in the Motorola logo until my battery drained off. USB won't recognize the device but I managed to use an universal charger to get the battery running again but again stuck at Motorola logo so I flashed a new rom using RSD. That got my device booting up again but the "Unknown battery" message started showing up whenever I tried to charge. I spent the whole weekend trying new sbf and battery fixes but none fixes the problem. I even got back the previous Quarx build I was using and still nothing. Is there something else I might have missed?
So I kept trying with different SBFs but none of them work and yesterday I changed back to Epsylon's last rom, which was the first I ever installed in my phone and now Android recognizes when the phone is connected or not, and it shows the "charging" icon but the battery full. In battery status still shows 100% and Unknown. Strangely enough when I go to the bootmenu it starts charging, but only if I keep touching the screen and moving around the menus.
Hello guys,
my friend gave me his defy+. I successfully rooted+flashed a new JB rom on it. He was experimenting something, he started to flash another rom on it, and now the device wont even boot. It does nothing, only it shows a white led when it is connected to the PC. The RSD lite recognizes the device.
Is there any solution to fix this or it should fly in the trash?
edit:
I flashed this rom
DEFYPLUS_U3_4_5_1_134_DFP-231_CEE_ROOTED_No_Signed
now the device starts, gets to the Motorola red logo, but then it goes to a black screen, where are these informations.
Bootloader 9.10
Err 46,69,35,00,27
battery OK
Transfer mode USB
Follow this procedure make it work
Vicsa said:
Follow this procedure make it work
Click to expand...
Click to collapse
Vicsa, the thread is pasted is about defy and materijalmen asked about defy+... will it works?
I am facing the same problem...
i have the same problem on defy mb525 red lens
materijalmen said:
Hello guys,
my friend gave me his defy+. I successfully rooted+flashed a new JB rom on it. He was experimenting something, he started to flash another rom on it, and now the device wont even boot. It does nothing, only it shows a white led when it is connected to the PC. The RSD lite recognizes the device.
Is there any solution to fix this or it should fly in the trash?
edit:
I flashed this rom
DEFYPLUS_U3_4_5_1_134_DFP-231_CEE_ROOTED_No_Signed
now the device starts, gets to the Motorola red logo, but then it goes to a black screen, where are these informations.
Bootloader 9.10
Err 46,69,35,00,27
battery OK
Transfer mode USB
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------
i rooted and flashed my defy mb525 and after the rsdlite finished and show me the pass its going to be rebooted and shows nothing and does nothing only the white led is blinking by connecting to the pc
please help me
is there a solution or not ?
email me if someone know a solution to solve it thnx [email protected]
Vicsa said:
Follow this procedure make it work
Click to expand...
Click to collapse
Do you maybe have a link for the motorola defy me525 (since the link was bout Defy plus)?
Defy Plus Bricked
Tungieee said:
Do you maybe have a link for the motorola defy me525 (since the link was bout Defy plus)?
Click to expand...
Click to collapse
Hi,
I'm too facing same issue, Did you found any solution ?
Issue is even when connecting to PC phone is not getting detected hence I could not flash it.
The problem started when i tried to downgrade my defy to CM7.2 from CM10.
First i was getting a problem of "Encryption unsuccessful". i browsed through a lot of threads and decided to use Rsdlite to flash a sbf file.
i tried flashing the Asia retail version.It showed 'Passed" in Rsdlite but i got stuck at the Motorola logo.
i again browsed through a number of threads, watched a few videos, and decided to flash a sbf "DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed" (i now realise this was fatal for my phone). (till this point the "SW Update" screen on phone showed the bootloder version to be 9 or 10 (dont exactly remember)). The phone just died after this. It wont start . No Motorola logo, No Recovery Mode, No bootloader mode. It just showed white led when connected to the pc and was not recognized by Rsdlite. i realised that the problem might be Empty Battery.
After this i tried the McGyver method and finally my phone was recognized by the rsdlite.
but now during the SW Update phase the screen doesnt show any bootloader version. and the end result is the same. White light at top, phone doesnt start, no M logo,,,, just a dead brick... another problem is that even after i put in a new battery, rsdlite will only recognise the phone only when i use the McGyver fix.
Please help me..... give me a working sbf file..
i dont want to just give up on this incredible phone...please help....
bhanudude said:
The problem started when i tried to downgrade my defy to CM7.2 from CM10.
First i was getting a problem of "Encryption unsuccessful". i browsed through a lot of threads and decided to use Rsdlite to flash a sbf file.
i tried flashing the Asia retail version.It showed 'Passed" in Rsdlite but i got stuck at the Motorola logo.
i again browsed through a number of threads, watched a few videos, and decided to flash a sbf "DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed" (i now realise this was fatal for my phone). (till this point the "SW Update" screen on phone showed the bootloder version to be 9 or 10 (dont exactly remember)). The phone just died after this. It wont start . No Motorola logo, No Recovery Mode, No bootloader mode. It just showed white led when connected to the pc and was not recognized by Rsdlite. i realised that the problem might be Empty Battery.
After this i tried the McGyver method and finally my phone was recognized by the rsdlite.
but now during the SW Update phase the screen doesnt show any bootloader version. and the end result is the same. White light at top, phone doesnt start, no M logo,,,, just a dead brick... another problem is that even after i put in a new battery, rsdlite will only recognise the phone only when i use the McGyver fix.
Please help me..... give me a working sbf file..
i dont want to just give up on this incredible phone...please help....
Click to expand...
Click to collapse
Do you have Defy or Defy+? If you have Defy (which lens?), then you just made your phone BL7. Follow this thread and report back - http://forum.xda-developers.com/showthread.php?t=1889325.
When downgrading from CM10 to CM7.2, always remember to format system and data to ext3 first! I made the same mistake (had the same problem as you), then I followed the above guide.
When the SW update screen comes up, bootloader version doesn't show normally.
hotdog125 said:
Do you have Defy or Defy+? If you have Defy (which lens?), then you just made your phone BL7. Follow this thread and report back - http://forum.xda-developers.com/showthread.php?t=1889325.
When downgrading from CM10 to CM7.2, always remember to format system and data to ext3 first! I made the same mistake (had the same problem as you), then I followed the above guide.
When the SW update screen comes up, bootloader version doesn't show normally.
Click to expand...
Click to collapse
Mine is a Defy (MB525) green lens and not a defy+ (mb526). U sure that i should follow this guide...??
Also i Cant manually power on my device...!!! even if i flash some sbf from the list of sbfs the rsdlite will show pass but i wont be able to power on my phone... help help...
bhanudude said:
Mine is a Defy (MB525) green lens and not a defy+ (mb526). U sure that i should follow this guide...??
Click to expand...
Click to collapse
I think you just flashed a bl7 sbf (Defy+) meaning your phone now has Defy+ firmware with green lens. If you've tried everything else and it didn't work, then do that as a last resort. Both CM10 and CM10.1 will work.
hotdog125 said:
I think you just flashed a bl7 sbf (Defy+) meaning your phone now has Defy+ firmware with green lens. If you've tried everything else and it didn't work, then do that as a last resort. Both CM10 and CM10.1 will work.
Click to expand...
Click to collapse
Btw, this is the information i get when i connect my phone to my pc through rsdlite...
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x000910
DRM Version: N / A
AP Die ID: 04500210611268010000dcff0200
BP Die ID: 0000000000000000000000000000
AP Public ID: 0a637f619605568d5c5aa50534a5bd6f5d743076
BP Public ID: 0000000000000000000000000000000000000000
To confirm you've gone to BL7, you can try flashing froyo sbf. There will be a bootloader error. If that's the case then follow that thread and CM10/10.1 or MS2Ginger are the only options I think.
hotdog125 said:
To confirm you've gone to BL7, you can try flashing froyo sbf. There will be a bootloader error. If that's the case then follow that thread and CM10/10.1 or MS2Ginger are the only options I think.
Click to expand...
Click to collapse
Thanks a lot Hotdog..!!
my defy is finally alive..!!!
but now its mb526.... so some feature wont work right..?? cn u tell me how to go back to defy from defy+ ???
bhanudude said:
Thanks a lot Hotdog..!!
my defy is finally alive..!!!
but now its mb526.... so some feature wont work right..?? cn u tell me how to go back to defy from defy+ ???
Click to expand...
Click to collapse
Yes, the camera won't work since it is green lens. The sbf you flashed in the beginning (DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed) made your Defy into Defy+. That sbf was meant to be for Defy+ users.
You cannot go back to Defy. Since your phone is now BL7, you cannot go back to froyo.
So now you can flash MS2Ginger/CM9.1 (by walter79)/CM10/CM10.1 or any 2ndboot ROM. I think you can't install CM7 also.
You can find MS2Ginger,CM10/10.1 ROMs by Googling. Download CM9.1 by walter79 here - http://d-h.st/users/walter79/.
HI, I believe I have the same problem... I tried flashing my defy + with a portuguese version of android 2.3, when I was at 2.3. Now all I have is black screen with white led and it is not recognized by rdslite. As far as I understand I have first charge the battery with McGyver method or other charger, which will make the rdslite recognize the phone, and after that I can flash it with a newer firmware and get it back to life. Is this correct?
Thank you!
lews01 said:
HI, I believe I have the same problem... I tried flashing my defy + with a portuguese version of android 2.3, when I was at 2.3. Now all I have is black screen with white led and it is not recognized by rdslite. As far as I understand I have first charge the battery with McGyver method or other charger, which will make the rdslite recognize the phone, and after that I can flash it with a newer firmware and get it back to life. Is this correct?
Thank you!
Click to expand...
Click to collapse
Unless your battery is low do not use McGyver. Use it only as a last resort.
You must have tried to downgrade, which is not possible in Defy+ through RSDLite.
Do you know if there is any way to recover my phone? It is not being recognized by rdslite anymore. While rsdlite was recognizing it I tried flashing with JORDN_U3_97.21.51, but nothing happened.
lews01 said:
Do you know if there is any way to recover my phone? It is not being recognized by rdslite anymore. While rsdlite was recognizing it I tried flashing with JORDN_U3_97.21.51, but nothing happened.
Click to expand...
Click to collapse
The usual. Update drivers and RSDLite, make sure you are in bootloader mode. If all else fails, go McGyver and get RSDLite to recognise the phone.
lews01 said:
Do you know if there is any way to recover my phone? It is not being recognized by rdslite anymore. While rsdlite was recognizing it I tried flashing with JORDN_U3_97.21.51, but nothing happened.
Click to expand...
Click to collapse
Y U FLASH ECLAIR SBF? You happened to find the retarded Eclair SBF that has a CG version of 5. Make sure that you are in bootloader, then make sure that it is really a low battery problem (either the phone doesn't turn on at all, including regular boot, bootloader or recovery) or it says "battery low, cannot program" in bootloader.
hotdog125 said:
The usual. Update drivers and RSDLite, make sure you are in bootloader mode. If all else fails, go McGyver and get RSDLite to recognise the phone.
Click to expand...
Click to collapse
And after that, with firmware should I flash it?
Thanks again!
bhanudude said:
Thanks a lot Hotdog..!!
my defy is finally alive..!!!
but now its mb526.... so some feature wont work right..?? cn u tell me how to go back to defy from defy+ ???
Click to expand...
Click to collapse
How did you do that if you can't access the recovery ??????????????
droid_<3er said:
Y U FLASH ECLAIR SBF? You happened to find the retarded Eclair SBF that has a CG version of 5. Make sure that you are in bootloader, then make sure that it is really a low battery problem (either the phone doesn't turn on at all, including regular boot, bootloader or recovery) or it says "battery low, cannot program" in bootloader.
Click to expand...
Click to collapse
From my Experience ::
1. cross your fingers :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
2.Use the Mcgyvor's method to get your phone recognized by rsdlite. (Only as a last resort)
3.After that just follow the procedure in Hotdog's Guide ( 2nd or 3rd reply in this thread)
4.After that your phone will become MB526.
5.flash any ROM designed for both 525 and 526
Cheers..!! :goodYou can treat me If you want..
bhanudude said:
From my Experience ::
1. cross your fingers :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
2.Use the Mcgyvor's method to get your phone recognized by rsdlite. (Only as a last resort)
3.After that just follow the procedure in Hotdog's Guide ( 2nd or 3rd reply in this thread)
4.After that your phone will become MB526.
5.flash any ROM designed for both 525 and 526
Cheers..!! :goodYou can treat me If you want..
Click to expand...
Click to collapse
Please help!:crying:
I can't find the sbf....the links from here doesn't work http://forum.xda-developers.com/showthread.php?t=1618718
Where did you find the sbf??
MikBre said:
Please help!:crying:
I can't find the sbf....the links from here doesn't work http://forum.xda-developers.com/showthread.php?t=1618718
Where did you find the sbf??
Click to expand...
Click to collapse
You're gonna have to wait, buddy. It says right up on the website: "Quit e-mailing me about "no links" lol ..... there was a HDD failure - links are being recovered (will take some time)."
Right now only the 2012 and 2013 phones are up (etc. Droid Razr, Droid Razr HD, Electrify M, Photon Q).
Unless someone can upload the huge-a** file to some file-sharing service, you're out of luck. Sorry. I don't even have the Defy SBFs anymore.
droid_<3er said:
You're gonna have to wait, buddy. It says right up on the website: "Quit e-mailing me about "no links" lol ..... there was a HDD failure - links are being recovered (will take some time)."
Right now only the 2012 and 2013 phones are up (etc. Droid Razr, Droid Razr HD, Electrify M, Photon Q).
Unless someone can upload the huge-a** file to some file-sharing service, you're out of luck. Sorry. I don't even have the Defy SBFs anymore.
Click to expand...
Click to collapse
Restored my phone :good:
SBF from here
:victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory:
Which SBF did you flash, please?
Hey Guys,
i think i broke my Defy and i got the feeling that it may not be recoverable...
So i tried to install a new SBF, cause i wanted to have a Stockrom on it.
Unfortunately i might have touched the usb-cable and the flash failed.
I had the Problem with the ShadowRom, which means whatever sbf i want to flash, i first need this Oldschool Chinese Beta Rom (JORDN_U3_97.21.51.sbf
).
I Pluged in my defy and RSD-Lite recognizes the Phone as S-Flash Omap 3630, it also flashes the sbf, says that its rebooting and then i get a black screen. In RSD nothing chages when i plugin the Phone again.
The white LED is glowing.
I'm using RSD-Lite 6.0 and my Phones drivers are installed.
In the Attachement i put a screenshot of what stands on RSD-Lite.
Is there anyway, i might be able to restore the Phone.
PS.: Also tried 2 other .sbf's, same result
Flash dfp231
Sent from my MB526 using Tapatalk 4
Try with Retail Nordic for Defy+
Red or Green lenses?
sbf (dot) droid-developers (dot) org
(I may not post links yet)
esok44 said:
Hey Guys,
i think i broke my Defy and i got the feeling that it may not be recoverable...
So i tried to install a new SBF, cause i wanted to have a Stockrom on it.
Unfortunately i might have touched the usb-cable and the flash failed.
I had the Problem with the ShadowRom, which means whatever sbf i want to flash, i first need this Oldschool Chinese Beta Rom (JORDN_U3_97.21.51.sbf
).
I Pluged in my defy and RSD-Lite recognizes the Phone as S-Flash Omap 3630, it also flashes the sbf, says that its rebooting and then i get a black screen. In RSD nothing chages when i plugin the Phone again.
The white LED is glowing.
I'm using RSD-Lite 6.0 and my Phones drivers are installed.
In the Attachement i put a screenshot of what stands on RSD-Lite.
Is there anyway, i might be able to restore the Phone.
PS.: Also tried 2 other .sbf's, same result
Click to expand...
Click to collapse
leonardo.porro said:
Try with Retail Nordic for Defy+
Red or Green lenses?
sbf (dot) droid-developers (dot) org
(I may not post links yet)
Click to expand...
Click to collapse
I will give it a try when i'm back home
It's a green lensed one.
esok44 said:
I will give it a try when i'm back home
It's a green lensed one.
Click to expand...
Click to collapse
Just make sure you have enough battery charge, I think you may be with no charge, so you won't make it...
If your battery is gone, you will have to use McGyver method, or an external charger. The defy won't charge by usb or wall charger if it don't have a system...
leandrolutz said:
Just make sure you have enough battery charge, I think you may be with no charge, so you won't make it...
If your battery is gone, you will have to use McGyver method, or an external charger. The defy won't charge by usb or wall charger if it don't have a system...
Click to expand...
Click to collapse
Thanks for this hint
Still got an old McGyver-Cable and an external Batterycharger.
I bricked my Defy really often, when it was my daily driver, so it was a necessary buy
esok44 said:
Thanks for this hint
Still got an old McGyver-Cable and an external Batterycharger.
I bricked my Defy really often, when it was my daily driver, so it was a necessary buy
Click to expand...
Click to collapse
Hahah nice buy
I bought an external charger, it's safer (I think), and works like a charm hahah
Wish you luck, I did it a lot of times :victory:
try use RSD-Lite 4.6
Hi,
I have defy plus now it does not even on.when I charge it, it is showing a white led light.
I have installed jb 4.1.2 rom and flashed a sbf it was bricked and flashed another sbf now its dead.it does not go to boot loader or moto logo.plz.....help me.....
---------- Post added at 11:41 AM ---------- Previous post was at 11:36 AM ----------
I dont know what to do now plzzzzzz help me.....
Use factory cable for flashing
Sent from my MB526 using Tapatalk 4
What is this flashing cable??And I dont know that which sbf files I have flashed.thanks in advance for u r reply.and sorry for my bad english
---------- Post added at 11:12 AM ---------- Previous post was at 11:06 AM ----------
What is this factory cable??And I dont know that which sbf files I have flashed.thanks in advance for u r reply.and sorry for my bad english
Flash DFP231 BL7.
Hi can u share the link to download and procedure to flash plzzzzzz.
Flash With RSD
http://sbfdownload.droid-developers..._USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf.gz
All SBF
http://sbf.droid-developers.org/umts_jordanplus/list.php
---------- Post added at 09:19 AM ---------- Previous post was at 09:18 AM ----------
Flash With RSD
http://sbfdownload.droid-developers..._USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf.gz
All SBF
http://sbf.droid-developers.org/umts_jordanplus/list.php
OMG ! I have flashed it with the firmware-motorola-defy-plus-root BL7-et-DFP-231.And the phone is showing battery low cannot program.So I have unplugged the device.
himusarda said:
OMG ! I have flashed it with the firmware-motorola-defy-plus-root BL7-et-DFP-231.And the phone is showing battery low cannot program.So I have unplugged the device.
Click to expand...
Click to collapse
dont worry budy
use external charger
or
mcgyver method.
cut usb cable and red wire to (+) on battery & black wire to (-) battery.
jalal-jap said:
dont worry budy
use external charger
or
mcgyver method.
cut usb cable and red wire to (+) on battery & black wire to (-) battery.
Click to expand...
Click to collapse
I have charged it through external charger and now what to do...
use RDS and Flash this:
http://sbfdownload.droid-developers..._USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz
After flashing can I root it and install android 4.3..
yes.
use frama root apk to root.
http://forum.xda-developers.com/showthread.php?t=2361972
i had rooted the defy+ & installed cm7(i think because it had been a long time ago) for my friend
my friend did a reset on the phone since it was slowing down...
i think it has bricked...
because it doesn't turn on also
he got it checked at the service center, they said they have to change its motherboard
i doubt that....
i think the battery is dead too
will it charge even if the phone is bricked???
now how do i restore the phone back to stock????
any kind of suggestions will be appreciated
Use the Motorola factory cable guide to make the cable which should get you to the boot loader if your motherboard is fine
Sent from my Nexus 5 using Tapatalk
thekguy said:
Use the Motorola factory cable guide to make the cable which should get you to the boot loader if your motherboard is fine
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Pressing the power & volume down button wil take me to the bootloader right?
nothing seems to happen
the screen doesn't lit up also
mclerenef1 said:
Pressing the power & volume down button wil take me to the bootloader right?
nothing seems to happen
the screen doesn't lit up also
Click to expand...
Click to collapse
it's turn off (take the battery out if it's getting stuck at boot to make sure) then hold down power and vol UP to get to the boot loader
If you get no response with factory cable, your device may be hard bricked
Sent from my Nexus 5 using Tapatalk
mclerenef1 said:
i think the battery is dead too
will it charge even if the phone is bricked???
Click to expand...
Click to collapse
Try the McGyver method from here:
http://forum.xda-developers.com/showthread.php?t=1828639
thekguy said:
Use the Motorola factory cable guide to make the cable which should get you to the boot loader if your motherboard is fine
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
could u please explain it???
i have asked my friend to get the cable
is there a link that you can post??
EDIT: battery is charging via usb now
THANKS to @sevenrock
is it possible that the bootloader could be deleted???
because i was goin through some threads
twrp erased the internal storage along with the bootloader
thats what he claims...
just curious...
is dat possible?
btw i left the phone overnight connected(not the original moto cable, used sony cable) to my macbook pro(running win 8.1)
still the same
in rsd lite nothing shows up even after pressing down power+volume up
The McGyver method is very dangerous I would have sugested you not to use it because in my case I will never have the possibility of charging my phone via usb cable but with an universal charger and it can't be reverted so you are warned now,
Are you sure your battery is now charged to enter bootloader? It can't be erased, if not, then charge your battery with an universal charger then try to enter bootloader
Sent from my MB526 using Tapatalk
DiegoxG said:
The McGyver method is very dangerous I would have sugested you not to use it because in my case I will never have the possibility of charging my phone via usb cable but with an universal charger and it can't be reverted so you are warned now,
Are you sure your battery is now charged to enter bootloader? It can't be erased, if not, then charge your battery with an universal charger then try to enter bootloader
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
If that's the case them I will ask him to buy those external chargers or check if his friends have the same phone
& get the battery charged
guys
looks like the battery is charged
still not able to go into bootloader
it got recognized when i connected to the laptop
it also got recognized rsd lite
hav attached screenshots
please take a look & help me out
can i just flash it?
Try a flash, if you have a black screen after flash try a bl7 sbf(dfp 231)
You can also try ticking ti omap blank flash in rsd
Sent from my Nexus 5 using Tapatalk
thekguy said:
Try a flash, if you have a black screen after flash try a bl7 sbf(dfp 231)
You can also try ticking ti omap blank flash in rsd
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Omap blank flash?
Can u provide a link please?
It's an option in rsd lite
Sent from my Nexus 5 using Tapatalk
thekguy said:
It's an option in rsd lite
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
after seeing thekguy mentioning abt dfp 231 i just remembered that i had flashed that sbf when i had rooted the phone
the phone booted after flashing bl7 sbf(dfp 231)
i guess the phone was bricked
& when it gets bricked... it goes to bootloader i guess
because i didnt have to press any buttons to go into bootloader
i just connected to rsd lite & flashing started & the screen lit up saying "SW update in progress"
Thank you guys for all the help & suggestons:good:
thekguy said:
Try a flash, if you have a black screen after flash try a bl7 sbf(dfp 231)
You can also try ticking ti omap blank flash in rsd
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I you have a bootloop , could not get into a recovery haven't a rooted devive with usb debugging on , first try a factory reset from stock recovery.....before & after sbf flash
p.s.: nice to see nearly unbrikable defy once more
one of the forum rules tells us first read and use search function to keep threads clean because of things happen again and again and again
nothing for bad. ...
cheers
Sent from my MB525 red , froyo 2.2.2 german blurless service.sbf, as stock rom