Database Users

My P705 in emergency mode and Not being detected by the computer

I installed 10k rooted on my P705 and was about to install a custom recovery, when the phone came on it was in emergency mode but the computer could no longer detect it, I have tried all the usb ports on about 4 computers and changed the cable trice, So I'm a little bit sure it's nothing to do with the pc. I have tried putting it on holding volume + and -. Any help will be really appreciated because I am stuck right now.
I have gone through the forum for like 6 hours, I couldn't find anything , I apologize before hand if this was treated elsewhere.

Did you try flashing your stock firmware with Software update [KDZ] 1.0.4.4 (KDZ-Flasher) while in emergency mode?

Remove the Drivers and plug the phone in our PC.. maybe reinstall the Drivers

yes I did try to flash it but the computer doesn't detect it in the first place. So I get a " no phone found"

kevios12 said:
Remove the Drivers and plug the phone in our PC.. maybe reinstall the Drivers
Click to expand...
Click to collapse
thank you but that didn't work either

Just to be clear, you're trying to flash your stock firmware with Software update [KDZ] (KDZ-Flasher), while in emergency mode (your phone in is that yellow emergency mode)?
If so, then maybe try the LG MOBILE SUPPORT TOOL.
I'm not familiar with it, but I read here that it's an alternative to Software update.

need4steer said:
Just to be clear, you're trying to flash your stock firmware with Software update [KDZ] (KDZ-Flasher), while in emergency mode (your phone in is that yellow emergency mode)?
If so, then maybe try the ...
I'm not familiar with it, but I read here that it's an alternative to Software update.
Click to expand...
Click to collapse
Thanks but Thats not exactly the problem, It DOES NOT READ to begin with. If the laptop could detect the phone, then I would be able to flash "anything". My problem is the laptop cannot detect the phone....

I'm confused - what do you mean by "DOES NOT READ"?
Your wrote that you are getting "no phone found" in Software update [KDZ].
So I asked if this is happening when you are in the emergency mode (your phone screen is kind of yellow and there is "emergency mode" in it).
I also wrote that if you were in emergency mode, then try LG MOBILE SUPPORT TOOL.

use another computer, maybe a problem with your OS (windows)

need4steer said:
I'm confused - what do you mean by "DOES NOT READ"?
Your wrote that you are getting "no phone found" in Software update [KDZ].
So I asked if this is happening when you are in the emergency mode (your phone screen is kind of yellow and there is "emergency mode" in it).
I also wrote that if you were in emergency mode, then try LG MOBILE SUPPORT TOOL[/URL].
Click to expand...
Click to collapse
Heres the problem, its not detecting, If you can tell me some way to make the laptop detect the phone in emergency mode, I will be extremely grateful, ps kdz equally says no phone found cuz.... the laptop cannot detect the phone and LG MOBILE SUPPORT TOOL equally cannot find the phone connected to the laptop. So..........................................

d-hammer said:
Heres the problem, its not detecting, If you can tell me some way to make the laptop detect the phone in emergency mode, I will be extremely grateful, ps kdz equally says no phone found cuz.... the laptop cannot detect the phone and LG MOBILE SUPPORT TOOL equally cannot find the phone connected to the laptop. So..........................................
Click to expand...
Click to collapse
Okay, I got it.
Did you install the latest drivers?
If not, you can do so by downloading and installing them from your support site or by downloading and installing LG PC SUITE.
After that please open device manager and see if there's anything there with an exclamation or a question mark. If there is, please don't continue and post back what it is.
Only when you see that everything is okay, disconnect your phone, turn it off, enter into emergency mode (by clicking volume up + volume down + power button), make sure that you're in emergency mode (the yellow screen), connect your phone, run Software update [KDZ] (KDZ-Flasher), make sure to set the right type (CDMA / 3GQCT), make sure to leave the PhoneMode in DIAG, browse your kdz stock firmware file, and then click on "Lunch software update".
I'll be looking forward for your comment.
Please don't give up!

luthfi_11 said:
use another computer, maybe a problem with your OS (windows)
Click to expand...
Click to collapse
thanks but I actually tried it on linux, it didn't detect it either.

d-hammer said:
thanks but I actually tried it on linux, it didn't detect it either.
Click to expand...
Click to collapse
i have no problem with windows 7 & windows 8, just try another computer bro

d-hammer said:
thanks but I actually tried it on linux, it didn't detect it either.
Click to expand...
Click to collapse
Try what I suggested above.

Yesterday i was upgrading my LG P705 to 4.1.2 usind KDZ V20B, but it failed & its now stuck in emergency mode. The main problem is my PC is not recognizing it. I uninstalled LG drivers & installed again, but then also, its not recognised my my PC. Please Help.
---------- Post added at 06:00 PM ---------- Previous post was at 05:54 PM ----------
d-hammer said:
Thanks but Thats not exactly the problem, It DOES NOT READ to begin with. If the laptop could detect the phone, then I would be able to flash "anything". My problem is the laptop cannot detect the phone....
Click to expand...
Click to collapse
u fixed your phone or not. plz help. I'm also stuck in same problem.

diwaker0 said:
Yesterday i was upgrading my LG P705 to 4.1.2 usind KDZ V20B, but it failed & its now stuck in emergency mode. The main problem is my PC is not recognizing it. I uninstalled LG drivers & installed again, but then also, its not recognised my my PC. Please Help.
---------- Post added at 06:00 PM ---------- Previous post was at 05:54 PM ----------
u fixed your phone or not. plz help. I'm also stuck in same problem.
Click to expand...
Click to collapse
Same problem here. I downloaded a program called Optimus Toolkit, as I have an Optimus LGl45c, and the program is for
Linux. Same problem- CAN'T SEE PHONE. Program must use ADB, which CAN'T SEE PHONE while it's in emergency mode, as
apparently the correct partition isn't mounted!! Windows KDZ updater sees phone (try the solution from another blog- run in
different compatibility mode: right click on program>properties>compatibility. this worked for me) but the KDZ Updater can't
find the LGMobileDL.dll... lol! wait til you try it!...) So, for he/she who suggested LG PC Suite, please listen. Suite CAN'T SEE
PHONE either, and refuses to run any further....
Anybody have any tricky ways to flash a boot? It would have to be a Linux hack method.....

I think he did not check usb debugging so cant find phone
Not sure if it will work but no harm trying at this stage:
take out batteries,
wait for 30s,
put it back,
hold power and volume down
when keys light up, touch menu button (not the home button)
feel vibrate?

LOL!
pwhitpod3 said:
Same problem here. I downloaded a program called Optimus Toolkit, as I have an Optimus LGl45c, and the program is for
Linux. Same problem- CAN'T SEE PHONE. Program must use ADB, which CAN'T SEE PHONE while it's in emergency mode, as
apparently the correct partition isn't mounted!! Windows KDZ updater sees phone (try the solution from another blog- run in
different compatibility mode: right click on program>properties>compatibility. this worked for me) but the KDZ Updater can't
find the LGMobileDL.dll... lol! wait til you try it!...) So, for he/she who suggested LG PC Suite, please listen. Suite CAN'T SEE
PHONE either, and refuses to run any further....
Anybody have any tricky ways to flash a boot? It would have to be a Linux hack method.....
Click to expand...
Click to collapse
K. A couple weeks later- for those of you with l45c:
You will get to the point where you find that LGNPST is the only thing that will flash. Having troubles registering the .dll? That cost me
over a week. Move the dll to your system/lg electronics/lgnpst folder and open the cmd window (terminal screen) as administrator.
Edit: Use the command> regsvr32 "name of dll".dll
You should google the regsvr command, as it is different for 64 bit machines, and there is a different system file to put the dll in..
Trouble is, we have no proper dll for the 45c. I tried the ms690 dll with an ms690 bin. Unfortunately, it flashed all the way through- and
now I have a perma-black screen... so don't try that.
I DO have an LGL45C-CT2 binary.... just no dll for the 45c, as usual. Not that it would matter- LGNPST cant see phone any more than
ADB could- there is no more 'emergency download'. I will check the battery, etc...
Morale of story- once again, there is evidence that the l45c is not supported. It is not an MS690, and probably not a P690... Use
LGNPST at your own risk, but quit pounding your head over other methods! Time wasted...
Until next time... keep hacking....

<del>

[Q] [Help] Bricked UMI ZERO

Hey people, can anyone get me a MTK droid backup of UMI ZERO? I need it to see if i can recover my bricked UMI
pleaaasseee.....
Also, it seems my scatter file backup from MTK does not have all t info?? and SP flashtools does not accept the ones included in the Ota-updates... so if anyone please can also get me a good scatter file ... i would be much apreciated.

Hello, you can get the rom including scatter file from Needrom! Just flash trough sp tool and you will be fine.
Sent from my UMI ZERO using XDA Free mobile app

I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway

reisamm said:
I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway [/QUOTE
please tell me how did you make it work...as i am in the same boat..the pc wont recognise it
Click to expand...
Click to collapse

reisamm said:
I tried but SP tool does not accept the scatter from that file... but solved... as I connect it in META mode to the PC he booted again... Thx anyway
Click to expand...
Click to collapse
please tell mew how you did it . i am so upset that my phone is absoluteley dead

Hi there raducux,
Well, this was about another situation, but mixing with ROM's cooking I was able to brick it again it was mrsim who help me (mod at china-devices.com, credit where is due). But I will tell you how I did it.
You need to have the adb android drivers installed and flashtool v5.1 or up (the one I used, but some people use the 3.1 version).
Download this ROM from needrom (scatter file compatible with FT).
Link: http://www.needrom.com/wp-content/uploads/2014/11/Y800_UMI_20141104_1907xx-s7yler.zip or
http://www.needrom.com/download/umi-zero/
Extract, and in flashtools select the scatter file inside the directory you extracted. Press flash, and (after pressing flash) connect the phone to the USB port holding the volume down key (so the phone connects in META mode), and the process should begin.
If all works well after flashing the phone should boot the new ROM, its version 3.01 so you have to upgrade it.
If that does not work, tell me a few things... I suppose the phone does not start or appear the 'Zero' logo, but tell me if when you connect it to the computer you ear the normal plugin USB sound?
FlashTools (all versions)
http://helpadude.com/sp-flash-tools/
Universal ADB Driver
http://www.needrom.com/download/universal-adb-driver/
Tell me if it worked, or if you need more help tell me what happened and how the phone responds. lot of people here also that can help. My 1st thing I check when buying a new phone (for many years now), is if it's 'XDA' Supported...
cheers

reisamm said:
Hi there raducux,
Well, this was about another situation, but mixing with ROM's cooking I was able to brick it again it was mrsim who help me (mod at china-devices.com, credit where is due). But I will tell you how I did it.
You need to have the adb android drivers installed and flashtool v5.1 or up (the one I used, but some people use the 3.1 version).
Download this ROM from needrom (scatter file compatible with FT).
Link: http://www.needrom.com/wp-content/uploads/2014/11/Y800_UMI_20141104_1907xx-s7yler.zip or
http://www.needrom.com/download/umi-zero/
Extract, and in flashtools select the scatter file inside the directory you extracted. Press flash, and (after pressing flash) connect the phone to the USB port holding the volume down key (so the phone connects in META mode), and the process should begin.
If all works well after flashing the phone should boot the new ROM, its version 3.01 so you have to upgrade it.
If that does not work, tell me a few things... I suppose the phone does not start or appear the 'Zero' logo, but tell me if when you connect it to the computer you ear the normal plugin USB sound?
FlashTools (all versions)
http://helpadude.com/sp-flash-tools/
Universal ADB Driver
http://www.needrom.com/download/universal-adb-driver/
Tell me if it worked, or if you need more help tell me what happened and how the phone responds. lot of people here also that can help. My 1st thing I check when buying a new phone (for many years now), is if it's 'XDA' Supported...
cheers
Click to expand...
Click to collapse
indeed. i too have been messing on xda a lot for a long time.
i managed to get into twrp again.
so that must be good...after. the battery died..;.butr mtk preloader doesnt instal;l
please tell me..first i need to hit download only...and after that.... ? the steps are a bit missleding .
---------- Post added at 03:10 PM ---------- Previous post was at 02:58 PM ----------
i managed to bioot the device in emui !!!! this morning..i could acces twrp. pressing volume down when connected to pc ..and the chinesse recovery pressing volume up ... rootjoy cant flash the device as it sais it is unsupported, now...i reeallly need to know the steps for going back to stock
---------- Post added at 03:29 PM ---------- Previous post was at 03:10 PM ----------
i am running antarct s emui . with twrp recovery... i need dto know the sp flash tools steps correctly to flash back to stock
preloader doesnt install correctly in pc because volume down...takes me to twrp...and volume up...to the chinesse recovery of huawei,
so preloader starts installing, but when in recovery..it gets dissconected

Could you tell how did you put it in meta mode? I have a Zero with no preloader and in windows it shows up as unknown device. No matter how I try to boot it up (vol- vol+). Other than showing in windows, it's dead. Is there a way to revive ti?

[Q] LG G2 F320L got bricked, almost give up here [PLEASE HELP]

Okay, this is must be my first thread since I join this lovely forum.
So here is the deal, this is my previous phone that I gave to my sister not so long ago, she has this not-so-bright wise *ss who try to fix her G2.
Sadly, he flashed the wrong rom, this is LG F320L and I think he flashed with F320K (based on error message that I got from the LG Flash Tool when I try to fix it)
This is the story so far :
1. the first time i got it on my hand (after get wrong-flashed that is ) :
- the phone is cannot boot, it stucked on black screen with fastboot command, try to go to recovery but not working, keep going to fastboot screen
- but i can still go to download mode (if I press vol UP while connect it to my PC) but somehow my PC will not recognize it
2. So I browse so many tutorial here and I end up erase and then reflash the stock recovery via cmd fastboot command, I'm 100% sure that I flashed the correct stock recovery file
- the process kinda work, the phone is able to go to recovery screen now although still cannot boot to system
- i still can go to download mode but the PC still didn't recognize it
- however, now the phone is being recognize by my PC if i plug the phone (without pressing anything on the phone), but gave me error code on the MTP driver
3. So next step I try to flash it via kdz method, didn't work of course, since my download mode won't be recognize, and then i also try to flash it via TOT method, also fail (again)
Note : on TOT method I try to flash it while NOT on download mode, since it will not recognized, it gave me error message that i try to cross flash or something. It says that I try to flash F320K to F320L (hence I assume that my sister's boyfriend flashed the wrong rom and got bricked)
also please note that while i'm did this i already make sure that i change the port setting to port 41
So now i stucked here, without the working download mode that can be recognized by my PC i think i'm start to running out of option to fix this phone
Please point me to the right direction good people of xda, please, thank you in advance

ecko no yaro said:
Okay, this is must be my first thread since I join this lovely forum.
So here is the deal, this is my previous phone that I gave to my sister not so long ago, she has this not-so-bright wise *ss who try to fix her G2.
Sadly, he flashed the wrong rom, this is LG F320L and I think he flashed with F320K (based on error message that I got from the LG Flash Tool when I try to fix it)
This is the story so far :
1. the first time i got it on my hand (after get wrong-flashed that is ) :
- the phone is cannot boot, it stucked on black screen with fastboot command, try to go to recovery but not working, keep going to fastboot screen
- but i can still go to download mode (if I press vol UP while connect it to my PC) but somehow my PC will not recognize it
2. So I browse so many tutorial here and I end up erase and then reflash the stock recovery via cmd fastboot command, I'm 100% sure that I flashed the correct stock recovery file
- the process kinda work, the phone is able to go to recovery screen now although still cannot boot to system
- i still can go to download mode but the PC still didn't recognize it
- however, now the phone is being recognize by my PC if i plug the phone (without pressing anything on the phone), but gave me error code on the MTP driver
3. So next step I try to flash it via kdz method, didn't work of course, since my download mode won't be recognize, and then i also try to flash it via TOT method, also fail (again)
Note : on TOT method I try to flash it while NOT on download mode, since it will not recognized, it gave me error message that i try to cross flash or something. It says that I try to flash F320K to F320L (hence I assume that my sister's boyfriend flashed the wrong rom and got bricked)
also please note that while i'm did this i already make sure that i change the port setting to port 41
So now i stucked here, without the working download mode that can be recognized by my PC i think i'm start to running out of option to fix this phone
Please point me to the right direction good people of xda, please, thank you in advance
Click to expand...
Click to collapse
Okay, so at this moment does the device try to mount quite a lot of partitions? Also does it give any errors on the screen if you power on without trying to boot to download mode or recovery? Ideally we want to see something along the lines of security error.
Sent from my LG-D802 using Tapatalk

I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english

Mati0807 said:
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
Click to expand...
Click to collapse
did you try to go from lollipop to kitkat?

heavy_metal_man said:
Okay, so at this moment does the device try to mount quite a lot of partitions? Also does it give any errors on the screen if you power on without trying to boot to download mode or recovery? Ideally we want to see something along the lines of security error.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
thanks for your reply, i really appreciate it
well, you're right, it does give me errors when i power on (without trying to go to download mode or recovery mode)
so when i power it on, it shows LG logo then the image goes like corrupt, at first it kinda like shaking then it went blur and last it disappearing, leave the screen into just blank screen.
but my PC recognize it on this moment, just the MTP driver that wasn't
about your first question i'm afraid i can't catch what that means

Code:
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
did you try to go from lollipop to kitkat?
yep :/ i dont have any idea what i must to do :/

ecko no yaro said:
thanks for your reply, i really appreciate it
well, you're right, it does give me errors when i power on (without trying to go to download mode or recovery mode)
so when i power it on, it shows LG logo then the image goes like corrupt, at first it kinda like shaking then it went blur and last it disappearing, leave the screen into just blank screen.
but my PC recognize it on this moment, just the MTP driver that wasn't
about your first question i'm afraid i can't catch what that means
Click to expand...
Click to collapse
Hmmm. okay, so what does the pc recognize it as exactly in device manager? Also if you connect the device do you get several pop ups stating that the mounted device needs to be fixed? It's just that if the partitions are being mounted we can reflash them manually using DD commands with ubuntu.
---------- Post added at 06:20 PM ---------- Previous post was at 06:05 PM ----------
Mati0807 said:
Code:
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
did you try to go from lollipop to kitkat?
yep :/ i dont have any idea what i must to do :/
Click to expand...
Click to collapse
Right, you need to follow this guide i think. Ensure your read it fully before you attempt anything. Now, the lollipop update apparently changed some partitions so I would flash the bumped twrp from the development section instead of the 2.6.3.2 version recommended. Then once you can boot into recovery flash the rom recommended in this post

heavy_metal_man said:
Hmmm. okay, so what does the pc recognize it as exactly in device manager? Also if you connect the device do you get several pop ups stating that the mounted device needs to be fixed? It's just that if the partitions are being mounted we can reflash them manually using DD commands with ubuntu.
Click to expand...
Click to collapse
it's just like the pict that i attached
about the pop ups, no.. i don't think i got those, the only pop ups that appear was the small notification on the bottom right panel that the drivers is being installed, and keep failing on the MTP driver, maybe that's why my PC can't recognizes it under the download mode

ecko no yaro said:
it's just like the pict that i attached
about the pop ups, no.. i don't think i got those, the only pop ups that appear was the small notification on the bottom right panel that the drivers is being installed, and keep failing on the MTP driver, maybe that's why my PC can't recognizes it under the download mode
Click to expand...
Click to collapse
if you open disk management what does it say about the g2? also did you install the universal adb driver at any point? http://forum.xda-developers.com/showpost.php?p=51265001&postcount=30 here it states that installing the universial driver will show your device as a samsung.
---------- Post added at 06:55 PM ---------- Previous post was at 06:42 PM ----------
Mati0807 said:
Code:
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
did you try to go from lollipop to kitkat?
yep :/ i dont have any idea what i must to do :/
Click to expand...
Click to collapse
Additional! this rom flash assumes you are on a d802 so if your not on a d802 the dont flash it!

heavy_metal_man said:
if you open disk management what does it say about the g2? also did you install the universal adb driver at any point? http://forum.xda-developers.com/showpost.php?p=51265001&postcount=30 here it states that installing the universial driver will show your device as a samsung.
---------- Post added at 06:55 PM ---------- Previous post was at 06:42 PM ----------
Additional! this rom flash assumes you are on a d802 so if your not on a d802 the dont flash it!
Click to expand...
Click to collapse
okay, i just checked on disk management and it appear that my PC doesn't recognized the G2, what makes it weird, at the same time it recognizes the G2 on device manager on ports (COM & LPT) on port 41, about the adb yes, i do believe i did that long time ago, though i forgot what was my intention of doing so

ecko no yaro said:
okay, i just checked on disk management and it appear that my PC doesn't recognized the G2, what makes it weird, at the same time it recognizes the G2 on device manager on ports (COM & LPT) on port 41, about the adb yes, i do believe i did that long time ago, though i forgot what was my intention of doing so
Click to expand...
Click to collapse
Hmmm. im stumped. I think its a bit of a catch 22 here. What i think has happened is that the rom flash that was done has changed some of the partition layout, but the methods of fixing that issue is either with DD commands from a custom recovery (which you dont have and cannot flash) or with DD commands using ubuntu when the device is auto-mounting all of your partitions. Its worth a look if you have an ubuntu disk around, if not download here, burn to disk or mount it to a bootable usb and see if ubuntu has any luck with it. Either that or try installing any drivers you can on the pc to get download mode working.
there is also this as a last resort but i've never had to do this so i cannot vouch for it :-/ Good luck pal.

Yeah, i do these.
I used these tool >> https://doc-04-5c-docs.googleuserco...27034/0B_Hol5T47S-benVFYWIxcGlQU0k?e=download
and install bumped recovery 2.8.5.1, then next with otg cabble flash these http://forum.xda-developers.com/showpost.php?p=59079665&postcount=536.
and now i install cloudyg2 and i feel great xD thank you!

Mati0807 said:
Yeah, i do these.
I used these tool >> https://doc-04-5c-docs.googleuserco...27034/0B_Hol5T47S-benVFYWIxcGlQU0k?e=download
dear do you have above mentioned tool bcoz i can not download , this page do not open
Click to expand...
Click to collapse

new link http://www39.zippyshare.com/v/UphAeXOO/file.html
With all files for d802. i used these for my phone!
Only run these tool, and smile

[Q] I think I've bricked my LG G2 D802, But not sure

Hello there. I think I've made something stupid, but dunno what.
Now I've a G2 with firmware update screen. But it doesn't say download mode at the beginning. vol+ and power throws me straight to the firmware mode. vol- and power (factory reset thing) does the same. No download mode, straight to the firmware. And also, my pc doesnt recognise the phone. Here's what I've done so far;
FLASH TOOL
I've downloaded and installed lg drivers, lots of them. (uninstalled and restarted my pc every time) My lg usb serial port with com41 is working but LGE Android MTP Device had yellow exclamation mark, always. Nonetheless I've tried. Changed the dlls, downloaded the correct tot file, changed the port to 41, replug the usb. Returns with 1 sec error, crossdl {rectangle} to D802 bla bla. No luck
LG MOBİLE SUPPORT TOOL
Found my phone. It said I've already latest software. (D802TR30C) I tried to upgrade recovery from the tool. Downloaded my software but it couldn' install to my phone because of unknown error. So, No luck again
LG FLASH TOOL 2014
I've downloaded the correct KDZ's. Installed my drivers. Started program with admin rights. Selected kdz and CSE flash. And then Start. Always stopped at %4 because of usb connection lost. No luck again and again
NOW I'M OUT OF IDEAS AN OPTIONS. PLEASE SOMEONE, HELP FOR GOD'S SAKE.

someone? anyone?

oblitus said:
someone? anyone?
Click to expand...
Click to collapse
Follow this link http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
---------- Post added at 03:34 PM ---------- Previous post was at 03:33 PM ----------
shubdya4u said:
Follow this link http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
I too similar problems but then this steps resolved it

[GUIDE] LG G Stylo T-Mobile H631 Unbrick

H631 T-MOBILE UNBRICK GUIDE
So I recently bricked my phone trying to root it with MarshMallow 6.0 and wanted to make a guide on how I managed to unbrick for anyone with the same problem.
WARNING: ALL SETTING/APPS/FILES WILL BE LOST.
I was stuck in a bootloop and LG Bridge wasn't working with the phone to restore it.
REQUIRED ITEMS
1.) LG Flash Tool DOWNLOAD HERE
2.) LG Driver DOWNLOAD HERE
3.) Stock KDZ DOWNLOAD HERE (This will take you back to 5.1.1 stock)
1) Put your phone into Download Mode. To do this, hold the volume up key while plugging the phone into you computer. Don't let go of the volume up key until your in Download Mode and you see the screen where it says "Firmware Update"
2) Unzip LG FLash Tool and run as administrator. You shouldn't have to change any of your settings but it should read this:
"Select Type" - CDMA
"Phone Mode" - DIAG
"Reset Time" - 33000
Select the KDZ file you downloaded "H63110j_00.kdz"
4.) Click CSE Flash
5.) Click Start
6.) Don't change the Country or Language.
Click "Clear Phone Software Update Registry"
Click "OK"
Now click OK to start the installation.
7.) Then let the program run and it might say that it lost connection or timed out but just click ok
If you look down at your phone you will see the percentage increasing as the installation goes on.
Once the phone is done it will reboot. Unplug it as soon as it starts the reboot after installation.
Your phone should now be unbricked! :good:
Not sure how this works on Boost/Verizon/Sprint. If you download the proper KDZ it should all work the same.
MetroPCS KDZ File ( Thanks @GameTheory. )
LP 5.1.1 MS631v10d
http://csmgdl.lgmobile.com/dn/downlo...S63110d_00.kdz
LP 5.1.1 MS631v10i
http://csmgdl.lgmobile.com/dn/downlo...S63110i_00.kdz
LP 5.1.1 MS631v10j
http://csmgdl.lgmobile.com/dn/downlo...S63110j_00.kdz
-------------------------------------------------------------------------------------------------------------------------------
H636 Fido Variant v10i (Thanks @asidorowicz)
http://csmgdl.lgmobile.com/dn/downlo...H63610i_00.kdz
H636 Fido Variant v10k ( Thanks @fearhq )
http://csmgdl.lgmobile.com/dn/downlo...H63610k_00.kdz
Links provided by DrakenFX

My phone was bootlooping giving me the (modified!!) error after rooting 6.0, this guide brought it back. Thanks much!

stuck
It's been stuck on 51 % not sure if its because i clicked on the question markss from the lg thingy. everything was smooth but its been there for 20-25 min and it hasnt moved should i restart the whole thing or no ? im a super big beginner
---------- Post added at 01:58 AM ---------- Previous post was at 01:48 AM ----------
wooohooooo yassss, it worked ! thank you so much you were the only help on the internet

When I go to download the kdz it says not found. Can someone link me to another source?

Hello, It is easy to use LG UP to flash stock firmware on LG G stylo H631,
Unbrick H631 and bring back to stock.
http://www.mylgphones.com/t-mobile-lg-g-stylo-h631-how-to-unrick-restore-back-to-stock.html
---------- Post added at 04:25 AM ---------- Previous post was at 04:22 AM ----------
antoine66 said:
When I go to download the kdz it says not found. Can someone link me to another source?
Click to expand...
Click to collapse
Check http://csmg.lgmobile.com:9002/csmg/b2c/client/web_model_list.jsp?country=US
all devices listed supports web download, it means you can use lg bridge to upgrade your device, in another words, You can download kdz firmware with IMEI.
AT&T and Sprint now hosts LG firmware on their own servers. So all LG devices from ATT or Sprint supports FOTA Update only., We can not download kdz firmware with IMEI

I can't access Download mode, Recovery mode or fastboot mode by pressing the vol up key while plugging the device. It bricked after restarting the phone after rooting android v6.0 with kingroot. Now it will only go to the endless boot loop on the "Secure booting error Error 1003 MODIFIED". I have tried many many ways and read everything I have found on the subject from many forums and other similar cases on other devices but have not found a solution for the problem, I still can't get to any of the previous modes mentioned! Has anyone had the same issue and was able to fix it without sending it to LG or carrier warranty? If so can that person help me get my phone fixed please!?Thanks in advance.
---------- Post added at 11:14 PM ---------- Previous post was at 11:08 PM ----------
nelsonluna17 said:
I can't access Download mode, Recovery mode or fastboot mode by pressing the vol up key while plugging the device. It bricked after restarting the phone after rooting android v6.0 with kingroot. Now it will only go to the endless boot loop on the "Secure booting error Error 1003 MODIFIED". I have tried many many ways and read everything I have found on the subject from many forums and other similar cases on other devices but have not found a solution for the problem, I still can't get to any of the previous modes mentioned! Has anyone had the same issue and was able to fix it without sending it to LG or carrier warranty? If so can that person help me get my phone fixed please!?Thanks in advance.
Click to expand...
Click to collapse
Also When I connect the phone to PC it is not recognized, it shows as UNKNOWN on device manager. Using a windows 10 PC for all that I have tried.

Help me Please
Can you please check the download link for
H636 Fido Variant v10i
H636 Fido Variant v10k
Thank you

yswdk said:
Can you please check the download link for
H636 Fido Variant v10i
H636 Fido Variant v10k
Click to expand...
Click to collapse
http://lg-firmwares.com

Hi I just want to know if is there is any working link to download the kdz for LG style metro pcs mm..

antoine66 said:
When I go to download the kdz it says not found. Can someone link me to another source?
Click to expand...
Click to collapse
Try Androidhost. I Cant Post The Link Because Im New But You'll Find It There Just Add /GCrdw