touchscreen was working today morning, took battery out for 2 hours, turned it back on and it was working abit weird, and now i cant press any touchscreen buttons atall!
So no softkeys (pick call, home etc.) and nothining on the big screen! I can turn on the phone, press the power button and volume buttons, see my home screen get calls etc.. hard reset twice, took battery out, nothing does it .. gonna try flash it but dont think itll do it ... and ideas?
Im in uk aswell if that makes a diff
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
I had the same thing, a oily spot, but it was there for months, then i noticed another new spot (looked like a tiny tiny burn) and thats when it stopped working completely... ive ordered a new screen which should be comming in a few days, im hoping thats the issue
will let you know if it works ....
keep me updated if you find anything
thanks!
NECROSTONE said:
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
Click to expand...
Click to collapse
download and install this _HTC Touch HD_TouchHD system.exe
BOLDESH said:
download and install this _HTC Touch HD_TouchHD system.exe
Click to expand...
Click to collapse
whats it do? and where from??
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
ok basically i received a new digitizer today (the actual touchscreen) ...
i dismantled the whole phone using the service manual and some video some guy made (VERY HELPFUL, if anyone wants it for any reason i can post a link), ok so i got rid of all the top bits, the circuit boards (or watever theyre called)
I got down to just the bezel, lcd and digitizer (dont know what a bezel is, the lcd is where the display actually is and digitizer is directly stuck ontop of that)
Apparently when replacing the screen, htc have made it so that you have to replace all three of those parts instead of individual ones, but you can buy them seperately so i thought i'd hero it.
i poked out the screen from the frame (some chewingum like stuff holding it in) then i started peeling off the digitizer (if you get one and want to try it you'll know where to peel) ... this was a mistake tho cause the lcd is unbelievebly sensitive so while peeling off it left scratches on the lcd, and me not knowing the lcd is sticky tried to wipe them and use a dust free cloth, which left alot of crap on the actual lcd!
i managed to get the digitizer off and ripped the cable that goes from digitizer to whatever reads our fingers on the screen, took it all off, placed the new one directly ontop and fed the wire exactly how it was for the first screen.
Put it all together again
Now I did mess up my screen badly, but in a good way! .. i now have full touchscreen working (smoother than ever) but my LCD display is near enough gone, so it looks like the screens really really dark, and i have to tilt it at certain angles to see the screen..
After all of this i now have a touch hd i can controll from my pc (using mymobiler) so i can recieve calls, send texts all from my pc when connected thru active sync, can even play teeter ... but not really the same!
I wouldnt recomend anyone to try what i did, although i think its worth the risk as I would have to replace the lcd anyways if i wanted a new screen in the first place... and who knows you might be able to peel the digitizer off clean (NEVER EVER EVER TOUCH LCD WITH ANYTHING!!!).
It all cost me around 10-15£ for the digitizer and screwdrivers and alot of hours dismantling phone compared to 50-100£ for a new lcd.
I am either going to get a new lcd now so i can actually see the screen, or get a new phone.
Sorry for the essay but hopefully this helps someone in any similar situation
if i do get a new lcd will post how it goes and if it sorts out everything
if anyone knows of any other reasons why my lcd would be so dim (brightness is 100%) accept for me getting carried away with it ... help would be appreciated
the_cool said:
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
Click to expand...
Click to collapse
Yeah swirly oil marks is how myne started ... i think i finished off the screen by trying to press hard on the mark to try and clear it .. . so be careful with it.. but think that overall the screen had seen better days (course only a few weeks after warrenty finishes) ... all conections inside were ok aswell
doczyus said:
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
Click to expand...
Click to collapse
Same here. Touch screen not working. Phone never flashed, droped,...
Any solution?
unfortunately, a friend of mine changed the touchscreen without success. Phone was in perfect state, no drop, no flash. Just the touch not responding. I'm not sure that changing whole part lcd+digitizer solve the problem.
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
igothtc2 said:
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
Click to expand...
Click to collapse
use ScreenCal to fix it, hopefully it can help you
Hakim Rahman said:
use ScreenCal to fix it, hopefully it can help you
Click to expand...
Click to collapse
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
igothtc2 said:
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
Click to expand...
Click to collapse
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Hakim Rahman said:
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Click to expand...
Click to collapse
Just did the hard reset. When it asked me to align the screen, I just couldn't align the top left corner. I had to press it like 50 times before cross went to the lower corner. Otherwise, after the align it's good for about couple of seconds and then it's just pressing all over.
I thought I had just some software issues because the screen wasn't dead, it responded to my touch. So, I'll probably have to buy a new screen and digitizer, right? Or do you have any other ideas?
Thank you again for your help!
Regards
firstly screencal installs calibration settings not for blackstone so do not install it, no point. (btw it also increases device touch sensitivity)
secondly you guys should try and install the calibration settings for blackstone, basicly what the align screen does, not sure where to find them for download but i could post the registrys if someone wants to make a .cab from them. (atm i cba making the .cab but i am able to do it )
if the calibration settings do not work i think it is best to buy a new lcd package (or buy new device and give me old one for spares oj)
Rn
hi buddy ! What you mean GSensorCalibrator ??
i didnt mention anything about gsensor calibration dude.
tried and tested screencal the other week and it screwed my blackstone.
install these instead:
*screen calibration, sets the blackstone touch points: (aligning the screen)
if you install a cab with these registrys it should fix the alignment problem.
(if it doesnt then its hardware issue = lcd etc)
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"MaxCalError"=dword:8
"CalibrationData"="511,542 183,881 183,198 834,197 833,880"
*this one will maximise the touch sensitivity for those that want it:
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:0
Rn
Does anyone have a recommendation where you can buy a digitizer and lcd from?
Hi all
I face of with a litle problem I have from some days a area of screean without touch haw can i repear this is this soft isue. I was traing few roms with the same result
florek235 said:
Hi all
I face of with a litle problem I have from some days a area of screean without touch haw can i repear this is this soft isue. I was traing few roms with the same result
Click to expand...
Click to collapse
Next time I recommend you use the search function... This has been discussed several times.
But yeah, you are not alone... This is a common problem or defect on the LG G2 (all variants). A few days ago I got the same problem where just a part of the top of the screen does not respond to touch.
As far as I could tell, the only solution is to replace the whole screen assembly or just the touch screen, but the replacing just the touch screen requires so much delicate and specialized work since the screen and the touchscreen are glued together so I recommend investing on a new screen-touchscreen replacement that will set you back about $80 USD but easier to replace by yourself.
I've been trying to figure what could have caused this on my G2 since I've never dropped it, but there are two possible scenarios for me:
1. A few days ago I was on a call on a very VERY hot and humid day, I was sweating like a pig and when I was on the phone, I noticed the receiver stopped working due to sweat coming into the speaker. I was stupid enough to blow into it trying to clear it, of course it didn't work but once it dried, the speaker worked again.
2. On a few occasions, I have forgotten to remove my phone from by back or front pocket when climbing into my car. I could imagine the phone would flex just a tiny bit and figure that might not be good, even though it was really not that much pressure nor time.
Those are the only two possible scenarios in my case. Other than that I don't see how it could have failed.
Cheers!
Rayanmx
Ok, so first thing's first. I've been researching this for a few days now before creating this post. The touchscreen issues I'm finding online, are similar to what I'm experiencing, but the solutions have already been done, or my phone is not responding to them. I'm making this thread to see if anyone else has experienced the same issues or has any new news before I a) return my phone to stock, b) replace the digitizer, or c) buy a new one or upgrade to the G3.
My G2 was rooted, but kept on stock ROM with only small tweaks here and there. After the latest update, I noticed my work G2 had much better reception, so I returned my phone to stock to download the update. After updating, I re-rooted the phone, this time, the only thing I changed was the keyboard which I replaced with the G3 keyboard. Everything was fine for months until about a month ago.
It started with not being able to pull down the notification shade on the right half. No biggie, but after a week or so, it got worse. While using instagram, I noticed that the confirm button was sporadically responsive. Sometimes it worked fine, other times it didn't work at all. It began to progressively get worse on an almost daily basis. I decided to see what was going on and enabled both input options in the developer options menu. I found that the entire right side, about 1/8" was not responding to touch, the area not covered by glass screen protector( i removed it later while trying to troubleshoot). The upper right area showed about a half inch block that wasn't responding (the area where the data ribbon is). I was ok with that as instagram was really the only thing I used being affected.
About a week ago, the mid left screen area started being errratic. It began to get worse and started to affect the front touch screen buttons ( the area where the other data ribbon is). I enabled the input options again and saw that I now had a good portion of my left side of the screen was unresponsive. Even though I didn't drop it, I thought maybe the data ribbons had come loose as those 2 areas are where they are. I opened and disassembled the phone and re-sat the connctions after inspecting them. I double-checked all the other connections and LDIs in case humidity was the culprit. Everything looked good. Didn't fix the problem.
I've had to set my phone to unlock by facial recognition to ensure I don't get locked out, and changed my pin to use numbers not affected. I'm going to replace the digitizer, but wanted to see if anyone else had the same issue, or knew if it was, indeed, a software issue before I spend $75 (I will be replacing the digitizer and LCD to get it working sooner rather than risk damaging the LCD while replacing the digitizer and having to wait another week). I don't want to send it in to LG because I bought it on ebay and have no proof of purchase for warranty, and I want it working sooner.
One thing I noticed that may help with diagnosing, the screen now looks different when off. Before, in direct sunlight, you could see the dotted matrix from the digitizer, and that was it. Now, I can see the retangular pattern across the entire screen. I checked my work G2 which I just received a few months ago and the rectangular pattern is only visible on the edges of the screen, the center is black with only the dotted matrix visible. Keep in mind, this is in direct sunlight. In shade, the rectangles are visible on both.
I'm hoping it's a software issue, but I'm wondering if the digitizer is starting to separate from the LCD. I don't see any acutal separation though.
Thanks for reading the book, and for any feedback. Also, because it will probably come up, I want to avoid upgrading if I can because the G3 is just a little too big.
I restored the phone to stock with the most up to date software. Still doesn't work. It appears to be a hardware issue. I really thought it was software because the dead spots word for a split second after turning on the phone. Oh well. Guess I'm going to order a new digitizer or LCD combo.