If I flash a stock rom (G900FXXU1ANE2 (BTU)) and repartition with a pit file, would it trigger know void 0x1? I want to remove the branding from my german o2 Branded S5.
mactron said:
If I flash a stock rom (G900FXXU1ANE2 (BTU)) and repartition with a pit file, would it trigger know void 0x1? I want to remove the branding from my german o2 Branded S5.
Click to expand...
Click to collapse
I guess no since Qualcomm should mount an HW protection efuse so if you switch to 0x1 u wont reset that counter. Maybe there is a chance for Exynos based device seems those cpu don't have an efuse protection.
if you flash the rom.the knox wound't change to 0x0.
Sent from my SM-G900F using XDA Free mobile app
So as i understand KNOX will trigger only when flashing recovery, rooting phone if we want to debrand and flash BTU firmware it will not trigger and stay on 0x0?
Related
hi
my note 3 has a t-mobile branding ...
What happens if I flash a stock Rom? for example an open Germany.
Just asking because of Knox Counter :/
XtremeAt said:
hi
my note 3 has a t-mobile branding ...
What happens if I flash a stock Rom? for example an open Germany.
Just asking because of Knox Counter :/
Click to expand...
Click to collapse
Id like to know this, I get good deal from network, but have always debranded handset before flashing BTU firmware.
Curious about the knox counter also in this situtation.
I'm not sure either but i think official firmwares should be safe to flash.
It's modded or unsigned kernels/bootloaders that will cause the KNOX flag to trigger.
On the S4 flashing stock fw triggers off the knox counter...
http://forum.xda-developers.com/showpost.php?p=45669402&postcount=4
But he repacked the FW with an older Kernel. Maybe that was the Problem.
I hope someone would test this
Knox will increase when flashing.
Sent from my SM-N9005 using xda app-developers app
Does someone even use Knox? I prefere root over Knox!
I have a question about Knox...
I don't care if I trip the Knox counter to 0x1 because when I root I know I void my warranty.
My question is once rooted and the Knox counter is at 0x1 is there a way to get the phone in a state where it will receive OTA updates.
danieljamie said:
Knox will increase when flashing.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
It doesn't increase, it is 0x0 or 0x1, on or off
Hi Guys .
i am planning to buy a Galaxy Note 3 SM-N9005 Snapdragon S800 Version but i have some questions .
First i dont care about warranty so i dont have any problem with KNOX Void Warranty 0×1.
i read that "It isn’t possible to downgrade to KNOX-disabled firmwares/bootloaders (An attempt sets 0×1) (even though some people state, downgrade is possible when omitting the bootloader file in a firmware package). By downgrading from KNOX-enabled to KNOX-disabled firmware, your devices will be locked to installation of newer firmwares."
and ". If you try to downgrade to KNOX-disabled system(MGA for example) your device will be flaged as KNOX Void Warranty 0×1 and will get a special lock – you won’t be able to update to any KNOX-enabled firmware even by ODIN. Samsung’s 4.3 update is KNOX-enabled, so if you tried to downgrade to KNOX-disabled firmware(for example MH8->MGA), you won’t be able to install 4.3 update."
so this mean if the The KNOX flag being tripped i wont be able to flash (install) any stock roms (newer builds) .
You can always upgarde no matter what knox warranty says
EDIT: all note 3 firmwares are knox enabled...
I think you took your qutes from a sgs4 forum, where android4.2 is NOT and andoid 4.3 is knox enabled
Leave a 'Thanks' if i helped you
SM-N9005 MJ7 Knox 0x0
XDA Premium 4 mobile app
Killberty said:
You can always upgarde no matter what knox warranty says
EDIT: all note 3 firmwares are knox enabled...
I think you took your qutes from a sgs4 forum, where android4.2 is NOT and andoid 4.3 is knox enabled
Leave a 'Thanks' if i helped you
SM-N9005 MJ7 Knox 0x0
XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://omegadroid.co/wanted-knox-void-warranty-0x1/
Rawand Kurdy said:
http://omegadroid.co/wanted-knox-void-warranty-0x1/
Click to expand...
Click to collapse
As i said...
Samsung Galaxy Note 3 (already has KNOX Security System)
Click to expand...
Click to collapse
You can update no matter what
Leave a 'Thanks' if i helped you
SM-N9005 MJ7 Knox 0x0
XDA Premium 4 mobile app
any body know if can i downgrade mt n900w8 to 4.3 from 4.4 telcel.. i cant find full firmware mj7 with pit file bl. everything.. another thing...today i open my phone just for curious and i see at&t words in the microphone and behind in the black cover says n900A but i try to flash full firmware of att and no work says pit file dont matches.. why is that?
Gentlemen official anouncemnti downgrade my phone from 4.4.2 to 4.3 mj4.. its possible. first time not boot.. but i flash again and it works..try it.
leo_hacker82 said:
any body know if can i downgrade mt n900w8 to 4.3 from 4.4 telcel.. i cant find full firmware mj7 with pit file bl. everything.. another thing...today i open my phone just for curious and i see at&t words in the microphone and behind in the black cover says n900A but i try to flash full firmware of att and no work says pit file dont matches.. why is that?
Gentlemen official anouncemnti downgrade my phone from 4.4.2 to 4.3 mj4.. its possible. first time not boot.. but i flash again and it works..try it.
Click to expand...
Click to collapse
You can so long as it's the w8
Ok. But why my phone have att words inside and the black hard rubber say n900A...in the back of rhe phone..its possible
leo_hacker82 said:
Ok. But why my phone have att words inside and the black hard rubber say n900A...in the back of rhe phone..its possible
Click to expand...
Click to collapse
No Idea, won't hurt you to try downgrade though. At most you'll get a bootloop and reflashing KK will fix it.
Right now im running 4.3 mj4 and works fine. No bootloops ...after downgrade works fine..now i need to find the way of recover my efs file..nvram.nv bak..all those files are missing..no backup.ideas?
I have samsung s4 mini sgh-i257m disguised as gt-i9195 and my Knox is 0x1 sadly, im on 4.2.2 with knox and i am wondering if i can upgrade to 4.4.2 and go back to the same 4.2.2. Basically go back and forth (knox enabled to knox enabled) i want to try 4.4.2 but i want to make sure i can still go back
I have read that you can downgrade the SM-G900T to ANE6, use towelroot to root it, then flash back to BNF6 using Mobile Odin Pro. Will this void the knox status? I'm flashing back old official firmware.
ajvpot said:
I have read that you can downgrade the SM-G900T to ANE6, use towelroot to root it, then flash back to BNF6 using Mobile Odin Pro. Will this void the knox status? I'm flashing back old official firmware.
Click to expand...
Click to collapse
No , flashing official firmware with Odin does not trip KNOX, also not when downgrading.
hay' i have note n910f with stock rom but no samsung rom and now i want to change it to stock from samsung.
if i will burn via odin stock rom did my knox flag will change to 0x1?
sorry for my bad english and thank's to the helpars.
Yes, flashing anything via Odin will trip your KNOX flag to 0x1. If that was the question..
@quadlt
Your answer is wrong
Stock Rom means original ROM.
Did you have a original Note 4 with original Rom?
Did you flash anything before?
If you're device is untouched, you can flash ANY original Samsung ROM via Odin without triggering Knox to 0x1
Gesendet von meinem SM-N910F mit Tapatalk
Yip flashing stock ROM with ODIN doesn't trip KNOX
I dream of a root who doesn't trip knox...like the note 3 had....I"m pretty sure it will come soon...
zxaz said:
I dream of a root who doesn't trip knox...like the note 3 had....I"m pretty sure it will come soon...
Click to expand...
Click to collapse
I hope so to, but i have my doubts....
Are you sure? I really Mbolblthlk say yes and others Slatham you know that I will run Knox from personal experience? Just do not feel like losing warranty on a new device, thanks for the help.
Can someone tell me where i can download the stock ROM from for N910F. Many thanks!
abultufail said:
Can someone tell me where i can download the stock ROM from for N910F. Many thanks!
Click to expand...
Click to collapse
http://samfirmware.com/
rom for SM-N910F
Hi
I just bought note 4 SM-N910F and i came unrooted with vision-x n4 ROM. The problem with rom is that the finger print does not work and there iss no data usage. When i boot(from the first time) on the upper of the screen there is written : Kernel is not seandroid enforcing
set warranty bit: kernel. Searching on the web this shows from the bloatware as there is a custom rom. I used sam moble to find the firmware but dont know which one i am going to download. Searching the APof the cureent firmware it corresponds to the t mobile variant (sammobile.com/firmwares/database/SM-N910T/TMB/) firmware. Can someone help me which i have to choose. Attached there is the the curent CSC.
Did anybody try to flash stock firmware? did it trip knox? I have seen different answers to this question so want to be sure. Another thing is the flash counter that will definitely change and that does void warranty if I'm not mistaken? thanks
Ok, I say this one and for all, I burned stock with Odin and it doesn't trip Knox flag on,it safe.
Sent from my SM-N910F using XDA Free mobile app
Hello guys i really need your help.
Im using BOD3 Firmware version,there are a lot of new versions,i was rooted knox 0x1 (2),and then i unrooted through SuperSu.How should i update my phone,via Kies,SmartSwitch,or Odin?I wouldnt prefer odin cause it flashes stock rom and my flashcounter will be knox0x1(3) Right?Is it safe now to update via Kies?
Your KNOX is already tripped, forget about it now and use ODIN, ODIN with Stock ROM will NOT change anything KNOX related, only custom
0x0 = Not tripped
0x1 - Tripped
The counter means nothing for warranty
*Detection* said:
Your KNOX is already tripped, forget about it now and use ODIN, ODIN with Stock ROM will NOT change anything KNOX related, only custom
0x0 = Not tripped
0x1 - Tripped
The counter means nothing for warranty
Click to expand...
Click to collapse
Thanks for your answer,but when i want to sell phone,and if they see knox0x1 and flash counter exmpl (3) it will for sure lower the price?Btw does flash counter goes up 4 ,bcs i videos i haven't see counter above 4?
You can not reset KNOX, 0x1 is permanent, counter stops at 4 afaik, mine has
*Detection* said:
You can not reset KNOX, 0x1 is permanent, counter stops at 4 afaik, mine has
Click to expand...
Click to collapse
Thanks just what i was searching for,that the counter doesnt go up 4.For price i didnt meant on knox i meant on flash counter,if they see flash counter if its 4 probably lowers price of phone isnt it ? Sorry for bothering.