Database Users

Downgrade to JB 3.04 from Nemesis beta.

Hey guyz.
I installed yesterday OTA 5 from JellyBlast and it works like crap cause it is Beta.
I want to get back to 3.0.4 but i dont know how .
Any help would be apreciated.
Thanks.

wolfpacknwo said:
Hey guyz.
I installed yesterday OTA 5 from JellyBlast and it works like crap cause it is Beta.
I want to get back to 3.0.4 but i dont know how .
Any help would be apreciated.
Thanks.
Click to expand...
Click to collapse
You may try reflashing OTA1, OTA2, OTA3, and OTA4. Make sure to wipe cache partition and to reboot after reflashing each OTA.

wolfpacknwo said:
Hey guyz.
I installed yesterday OTA 5 from JellyBlast and it works like crap cause it is Beta.
I want to get back to 3.0.4 but i dont know how .
Any help would be apreciated.
Thanks.
Click to expand...
Click to collapse
follow this method its fast u need to reboot only once.
1st goto cwm clear cache and dalvik cache then flash ota1 dont reboot again clear cache and flash ota2 dont reboot again clear cache and flash ota3 dont reboot . now clear cache and dalvik cache and flash ota4 . reboot done.

wolfpacknwo said:
Hey guyz.
I installed yesterday OTA 5 from JellyBlast and it works like crap cause it is Beta.
I want to get back to 3.0.4 but i dont know how .
Any help would be apreciated.
Thanks.
Click to expand...
Click to collapse
Hey I am currently using ota5 (on Hyperion lol) there is no problem with it except for the buggy launcher ... so just change the launcher it that's all...
Hit thanks....

samir basnet said:
follow this method its fast u need to reboot only once.
1st goto cwm clear cache and dalvik cache then flash ota1 dont reboot again clear cache and flash ota2 dont reboot again clear cache and flash ota3 dont reboot . now clear cache and dalvik cache and flash ota4 . reboot done.
Click to expand...
Click to collapse
If u don't reboot..mount system is necessary after each reboot..
Flash each update n mount system..then again flash..
Better if u start flashing from the beginning..that is the rom..
_________________________________
Hit thanks if I helped..

[Q] Galaxy Y: Reverting to stock ROM

Hi everyone esp. XDA devs....
I had already a custom rom installed in my galaxy Y, to be specific it is JellyblastV3, and I want to replace it with a new custom rom for my Galaxy Y i.e. Hyperion (from this thread: http://forum.xda-developers.com/showthread.php?t=2330297).
The problem is, the thread says, I must revert first my Galaxy Y to stock rom by using Odin and I'd read Guide to Flashing ROMS and Kernel.
I don't want to use Odin to revert my Galaxy Y to stock firmware simply because I don't have a cable connector.
The main question is, can I use Boot.img_flasher_V2.0_faqbly_2.zip, it is a Kernel Flasher from Recovery Mode, to flash the STOCK FIRMWARE PACKAGE? Is it possible?
the follow up questions are:
where can I find the boot.img in my Galaxy Y on order to place it in root of sdcard? I mean what is the source file location of boot.img?
according to your opinion, which is better STOCK FIRMWARE PACKEGE to install?
a) S5360_DXLJ1_OLBLG1_DXLI1_wipe_by_SplitFUS2.zip?
or
b) S5360_DXLL1_OLBLL1_DXLL1_wipe_by_SplitFUS2.zip?
The current Baseband version of my galaxy Y is S5360DXLL1.
any Help is SO MUCH APPRECIATED. :good:
PLEASE help me guys. :crying:
Thank you so MUCH in advanced for those who helped and will help.
:angel:GOD Bless you ALL guys...:angel:

mraj_2404 said:
Hi everyone esp. XDA devs....
I had already a custom rom installed in my galaxy Y, to be specific it is JellyblastV3, and I want to replace it with a new custom rom for my Galaxy Y i.e. Hyperion (from this thread: http://forum.xda-developers.com/showthread.php?t=2330297).
The problem is, the thread says, I must revert first my Galaxy Y to stock rom by using Odin and I'd read Guide to Flashing ROMS and Kernel.
I don't want to use Odin to revert my Galaxy Y to stock firmware simply because I don't have a cable connector.
The main question is, can I use Boot.img_flasher_V2.0_faqbly_2.zip, it is a Kernel Flasher from Recovery Mode, to flash the STOCK FIRMWARE PACKAGE? Is it possible?
the follow up questions are:
where can I find the boot.img in my Galaxy Y on order to place it in root of sdcard? I mean what is the source file location of boot.img?
according to your opinion, which is better STOCK FIRMWARE PACKEGE to install?
a) S5360_DXLJ1_OLBLG1_DXLI1_wipe_by_SplitFUS2.zip?
or
b) S5360_DXLL1_OLBLL1_DXLL1_wipe_by_SplitFUS2.zip?
The current Baseband version of my galaxy Y is S5360DXLL1.
any Help is SO MUCH APPRECIATED. :good:
PLEASE help me guys. :crying:
Thank you so MUCH in advanced for those who helped and will help.
:angel:GOD Bless you ALL guys...:angel:
Click to expand...
Click to collapse
You can flash hyperion over jellyblast v3.Follow the steps
1.Boot into CWM
2.format system,data and cache
3.wipe data and cache
4.mount all the partitions
5.flash hyperion
6.wipe data and cache again
7.reboot the system.

aniket.lamba said:
You can flash hyperion over jellyblast v3.Follow the steps
1.Boot into CWM
2.format system,data and cache
3.wipe data and cache
4.mount all the partitions
5.flash hyperion
6.wipe data and cache again
7.reboot the system.
Click to expand...
Click to collapse
what partitions? all I can see are
-mount /cache
-mount /data
-mount /sdcard
-unmount /system
-mount / sd-text
-format / cache
-format /data
-format /sdcard
-format /system
-format /sd-text
-mount USB storage.
I used cwm5.0.zip
will I try to use another version of cwm?
sorry sir, I'm just a newbei here...
btw, thanks a lot sir...

aniket.lamba said:
You can flash hyperion over jellyblast v3.Follow the steps
1.Boot into CWM
2.format system,data and cache
3.wipe data and cache
4.mount all the partitions
5.flash hyperion
6.wipe data and cache again
7.reboot the system.
Click to expand...
Click to collapse
wow sir, your suggestion, it works. i have successfully installed the hyperion 8.
but i don't know if there are bugs were exist because of the way I install it...
but thanks again...

mraj_2404 said:
wow sir, your suggestion, it works. i have successfully installed the hyperion 8.
but i don't know if there are bugs were exist because of the way I install it...
but thanks again...
Click to expand...
Click to collapse
No bugs... just some minor ones you won't notice.

aniket.lamba said:
No bugs... just some minor ones you won't notice.
Click to expand...
Click to collapse
what is it?

mraj_2404 said:
what is it?
Click to expand...
Click to collapse
Don't remember them right now
Just enjoy the Hyperion 8

aniket.lamba said:
Don't remember them right now
Just enjoy the Hyperion 8
Click to expand...
Click to collapse
ok. thanx again for being nice to help me.

[Q] MiniRom to Hyperion

Can I flash final Hyperion from miniRom touchwiz and stock kernel? thanks..

Yes just wipe system data cache in cwm
mount system data cache
Flash zip
restart
Flash ril fix if you loose IMEI

marcussmith2626 said:
Yes just wipe system data cache in cwm
mount system data cache
Flash zip
restart
Flash ril fix if you loose IMEI
Click to expand...
Click to collapse
no wipe dalvik cache and battery stats, sir?

AhmadLamela said:
no wipe dalvik cache and battery stats, sir?
Click to expand...
Click to collapse
Optional no harm in doing it

marcussmith2626 said:
Optional no harm in doing it
Click to expand...
Click to collapse
ok, I try it now. btw thanks sir :good:

Success! Thanks @marcussmith2626
Sent from my GT-S5360 using xda app-developers app

CREED V4

Hello everyone. I like CREED V4 and tried installing final build but every time I end up with bootloops. Is this rom fail, or I am doing something wrong?
I followed this tutorial:
1. Flash stock DDLK2 rom as Xicor Yagami said in his thread
2. Boot into CWM recovery
3. Wipe data
4. Wipe cache
5. Wipe dalvik cache (just in case)
6. Wipe battery stats (just in case)
7. Flash CREED V4 rom
8. Reboot
If I am doing something wrong, tell me the right tutorial for installing

After flashing stock DDLK2,follow the steps:
1.Boot into CWM.
2.Under mounts and storage,format system,data and cache.
3.Go back and wipe data and cache.
4.Again go to mounts and storage and mount all the partitions (All should show unmount)
5.Install zip from zip sd card and choose Creed V4 rom file.
6.When the installation is completed,go back and wipe data,cache and dalvik cache.
7.Once done with above steps,reboot the phone!
This tutorial works for every rom.

aniket.lamba said:
After flashing stock DDLK2,follow the steps:
1.Boot into CWM.
2.Under mounts and storage,format system,data and cache.
3.Go back and wipe data and cache.
4.Again go to mounts and storage and mount all the partitions (All should show unmount)
5.Install zip from zip sd card and choose Creed V4 rom file.
6.When the installation is completed,go back and wipe data,cache and dalvik cache.
7.Once done with above steps,reboot the phone!
This tutorial works for every rom.
Click to expand...
Click to collapse
Still no luck. Have you tried this rom by yourself?

creed v4 installation
i am newbie for this just tried installing creed v4 following the complete steps mentioned in the forum
but everytime i try to install, it enters into the bootloop.
using galaxy y gt-s5360
currrent rom 2.3.6 gingerbread DDMD1
even tried with deleting sd-card second partition

anujb said:
i am newbie for this just tried installing creed v4 following the complete steps mentioned in the forum
but everytime i try to install, it enters into the bootloop.
using galaxy y gt-s5360
currrent rom 2.3.6 gingerbread DDMD1
even tried with deleting sd-card second partition
Click to expand...
Click to collapse
Go into cwm
Format system data cache
Mount system data cache
Flash rom zip
Restart
Long as you are using stock or a stock based kernel this rom will boot

marcussmith2626 said:
Go into cwm
Format system data cache
Mount system data cache
Flash rom zip
Restart
Long as you are using stock or a stock based kernel this rom will boot
Click to expand...
Click to collapse
well thanks sir its now booted to the OS but its not showing any network
rest all other things are working fine tried with reinstalling the rom also same issue
what should i do now?
I have taken the backup of bml15

anujb said:
well thanks sir its now booted to the OS but its not showing any network
rest all other things are working fine tried with reinstalling the rom also same issue
what should i do now?
I have taken the backup of bml15
Click to expand...
Click to collapse
See ril thread - Link in signature

marcussmith2626 said:
See ril thread - Link in signature
Click to expand...
Click to collapse
I didn,t get you...

anujb said:
I didn,t get you...
Click to expand...
Click to collapse
Click the link in my signature to open up a list of my threads - find the ril thread & read it

marcussmith2626 said:
Click the link in my signature to open up a list of my threads - find the ril thread & read it[/QUOTE
after flashing the ril file for DDMD1 its working
thanks for support
Click to expand...
Click to collapse

BIRCK VNS-L31 Help Me Pls

So i have the VNS-L31 and i instaled cm 13 and my phone wold boot for like 30 sec and then go into erecovery i have tryd to reformat reflash and nothing works please help me

Download again the ROM and install again, your download might be currupted

Potato997 said:
Download again the ROM and install again, your download might be currupted
Click to expand...
Click to collapse
nope didint work it just boots in to erecovry

Can you tell me what steps did you do?

Potato997 said:
Can you tell me what steps did you do?
Click to expand...
Click to collapse
first i formated evry ting exept sd card and then i installed cm 13

Try in this way:
In TWRP, flash ROM and GApps
Wipe cache and dalvik cache
Reboot to TWRP again from the reboot menù
Click on Wipe, click on Format Data
Type yes and confirm
Reboot to system
Usually in this way it works, if it doesn't, unfortunately I can't help you anymore

Potato997 said:
Try in this way:
In TWRP, flash ROM and GApps
Wipe cache and dalvik cache
Reboot to TWRP again from the reboot menù
Click on Wipe, click on Format Data
Type yes and confirm
Reboot to system
Usually in this way it works, if it doesn't, unfortunately I can't help you anymore
Click to expand...
Click to collapse
nope didint work