Database Users

CREED V4

Hello everyone. I like CREED V4 and tried installing final build but every time I end up with bootloops. Is this rom fail, or I am doing something wrong?
I followed this tutorial:
1. Flash stock DDLK2 rom as Xicor Yagami said in his thread
2. Boot into CWM recovery
3. Wipe data
4. Wipe cache
5. Wipe dalvik cache (just in case)
6. Wipe battery stats (just in case)
7. Flash CREED V4 rom
8. Reboot
If I am doing something wrong, tell me the right tutorial for installing

After flashing stock DDLK2,follow the steps:
1.Boot into CWM.
2.Under mounts and storage,format system,data and cache.
3.Go back and wipe data and cache.
4.Again go to mounts and storage and mount all the partitions (All should show unmount)
5.Install zip from zip sd card and choose Creed V4 rom file.
6.When the installation is completed,go back and wipe data,cache and dalvik cache.
7.Once done with above steps,reboot the phone!
This tutorial works for every rom.

aniket.lamba said:
After flashing stock DDLK2,follow the steps:
1.Boot into CWM.
2.Under mounts and storage,format system,data and cache.
3.Go back and wipe data and cache.
4.Again go to mounts and storage and mount all the partitions (All should show unmount)
5.Install zip from zip sd card and choose Creed V4 rom file.
6.When the installation is completed,go back and wipe data,cache and dalvik cache.
7.Once done with above steps,reboot the phone!
This tutorial works for every rom.
Click to expand...
Click to collapse
Still no luck. Have you tried this rom by yourself?

creed v4 installation
i am newbie for this just tried installing creed v4 following the complete steps mentioned in the forum
but everytime i try to install, it enters into the bootloop.
using galaxy y gt-s5360
currrent rom 2.3.6 gingerbread DDMD1
even tried with deleting sd-card second partition

anujb said:
i am newbie for this just tried installing creed v4 following the complete steps mentioned in the forum
but everytime i try to install, it enters into the bootloop.
using galaxy y gt-s5360
currrent rom 2.3.6 gingerbread DDMD1
even tried with deleting sd-card second partition
Click to expand...
Click to collapse
Go into cwm
Format system data cache
Mount system data cache
Flash rom zip
Restart
Long as you are using stock or a stock based kernel this rom will boot

marcussmith2626 said:
Go into cwm
Format system data cache
Mount system data cache
Flash rom zip
Restart
Long as you are using stock or a stock based kernel this rom will boot
Click to expand...
Click to collapse
well thanks sir its now booted to the OS but its not showing any network
rest all other things are working fine tried with reinstalling the rom also same issue
what should i do now?
I have taken the backup of bml15

anujb said:
well thanks sir its now booted to the OS but its not showing any network
rest all other things are working fine tried with reinstalling the rom also same issue
what should i do now?
I have taken the backup of bml15
Click to expand...
Click to collapse
See ril thread - Link in signature

marcussmith2626 said:
See ril thread - Link in signature
Click to expand...
Click to collapse
I didn,t get you...

anujb said:
I didn,t get you...
Click to expand...
Click to collapse
Click the link in my signature to open up a list of my threads - find the ril thread & read it

marcussmith2626 said:
Click the link in my signature to open up a list of my threads - find the ril thread & read it[/QUOTE
after flashing the ril file for DDMD1 its working
thanks for support
Click to expand...
Click to collapse

[Q] Kit Kat flashing and external sd

Hi everyone
Right now I'm using a MK9 custom rom on my GT-i9500 with perseus kernel alpha16 and 4.2.2 bootloader (without any of KNOX s**t).
Actually I'm just about to flash Omega's NB3 build (or maybe wanam's one) and I'm really confused
I read several times that I should completely format every corner of my phone but what about my External SD? Will it be wiped when installing the ROM? Should I get it out before beginning the install and put it back after?
Also, if I have to format internal SD and remove the external one, where do I just put the installation zip?
And last question, is last Philz recovery (based on CWM 6.0.4.7) okay for all this?
Thanks for your help :angel:

Guuuys please !!
I need your help

ayedarts said:
Guuuys please !!
I need your help
Click to expand...
Click to collapse
No need to wipe external sd
Download custom kitkat and moved to external
Wipe data - cache - system - flash using CWM 6.0.4.6/ twrp

Absolutely correct

Androiders96 said:
No need to wipe external sd
Download custom kitkat and moved to external
Wipe data - cache - system - flash using CWM 6.0.4.6/ twrp
Click to expand...
Click to collapse
Thx a lot !!
So there s no risk ext-SD is wipe when doing the re-partition (that comes with Samsung-based kit kat builds) ?

partition CM 11 by Belfish

If i have aurora SP+ update 2 and i want to install CM11 I need to change partition?

??

oz0021 said:
If i have aurora SP+ update 2 and i want to install CM11 I need to change partition?
Click to expand...
Click to collapse
which partition u use currently???

insignia666 said:
which partition u use currently???
Click to expand...
Click to collapse
i don't know
how I can check it?

oz0021 said:
i don't know
how I can check it?
Click to expand...
Click to collapse
you can check it by going in settings->storage and check the size....

insignia666 said:
you can check it by going in settings->storage and check the size....
Click to expand...
Click to collapse
i have only the aviailble space in there
if this helps..

oz0021 said:
i have only the aviailble space in there
if this helps..
Click to expand...
Click to collapse
ok do one thing install the new recovery 6.0.4.6 and wipe everything and flash any of these partition http://forum.xda-developers.com/showthread.php?t=2615712 then install kitkat.....
kitkat needs 450mb space... so i guess u need to change ur partition scheme....

insignia666 said:
ok do one thing install the new recovery 6.0.4.6 and wipe everything and flash any of these partition http://forum.xda-developers.com/showthread.php?t=2615712 then install kitkat.....
kitkat needs 450mb space... so i guess u need to change ur partition scheme....
Click to expand...
Click to collapse
i don't understand the insralion guide of bliepart man
thanks for helping

oz0021 said:
i don't understand the insralion guide of bliepart man
thanks for helping
Click to expand...
Click to collapse
its simple just flash the partition zip from cwm recovery

insignia666 said:
its simple just flash the partition zip from cwm recovery
Click to expand...
Click to collapse
Hey man, my english is not good thats the reason why i had a problem.
can you explain to me the steps in your way to install the partition and the rom.
I sure it will work
thanks

oz0021 said:
Hey man, my english is not good thats the reason why i had a problem.
can you explain to me the steps in your way to install the partition and the rom.
I sure it will work
thanks
Click to expand...
Click to collapse
Ok here's the step by step guide:
1. Download this recovery, partition and rom place it in your root of your external sdcard.
2. Go to recovery then choose the recovery zip from your sdcard and flash it.
3. In the recovery itself go to advanced->reboot recovery.
4. When the recovery is rebooted make a factory reset, wipe partition cache, wipe dalvik cache.
In the recovery go to mounts and storage and wipe system, data and cache.
NOTE: While installing from sdcard in new recovery it will show you like /sdcard0=(external memory card) and /sdcard1=(internal storage).
5. Flash the partition from your sdcard. (Most probably the sdcard0.)
6. Reboot recovery.
7. Flash the ROM.
Happy Flashing......:laugh::laugh::laugh::laugh::laugh:

insignia666 said:
Ok here's the step by step guide:
1. Download this recovery, partition and rom place it in your root of your external sdcard.
2. Go to recovery then choose the recovery zip from your sdcard and flash it.
3. In the recovery itself go to advanced->reboot recovery.
4. When the recovery is rebooted make a factory reset, wipe partition cache, wipe dalvik cache.
In the recovery go to mounts and storage and wipe system, data and cache.
NOTE: While installing from sdcard in new recovery it will show you like /sdcard0=(external memory card) and /sdcard1=(internal storage).
5. Flash the partition from your sdcard. (Most probably the sdcard0.)
6. Reboot recovery.
7. Flash the ROM.
Happy Flashing......:laugh::laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
thanks you man you are the best :good:

[HYPERION9] stuck at 'Samsung galaxy y gt-s5360' screen

Anyone help me please... i flash the hyperion 9 Gm build... but i stuck at start up screen 'Samsung galaxy y gt s5360' ... i wait for 20minute at that start up screen... nothing happen...my previous rom is hyperion 8 final gm build with hell lock kernel...
#Sorry for bad english

EpullSalvatrucha said:
Anyone help me please... i flash the hyperion 9 Gm build... but i stuck at start up screen 'Samsung galaxy y gt s5360' ... i wait for 20minute at that start up screen... nothing happen...my previous rom is hyperion 8 final gm build with hell lock kernel...
#Sorry for bad english
Click to expand...
Click to collapse
have u wipe data/cache .
Sent from xda-app using smartphone

EpullSalvatrucha said:
Anyone help me please... i flash the hyperion 9 Gm build... but i stuck at start up screen 'Samsung galaxy y gt s5360' ... i wait for 20minute at that start up screen... nothing happen...my previous rom is hyperion 8 final gm build with hell lock kernel...
#Sorry for bad english
Click to expand...
Click to collapse
Make a full wipe :
Go to mounts and storage :
Format system,data,cache
mount them
Flash
Wipe data and cache
Reboot
Sent from my GT-S5360 using Tapatalk 2

mohamedrashad said:
Make a full wipe :
Go to mounts and storage :
Format system,data,cache
mount them
Flash
Wipe data and cache
Reboot
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
He/She was right
Sent From My Samsung Galaxy Y s5360

Just flash via odin and flash the rom again

make full wipe
I have make full wipe... but the result still same... flash via odin first? better i use other rom... this hyperion9 is so complicated... btw i dont have pc to flash odin...

Lemon_Lime`s said:
have u wipe data/cache .
Sent from xda-app using smartphone
Click to expand...
Click to collapse
alredy done it... not working...

EpullSalvatrucha said:
alredy done it... not working...
Click to expand...
Click to collapse
To flash stock based rom is very easy just:
Go to Cwm
Wipe everything
Mount everything
Flash the rom file
Wipe everything again
Reboot

No no no
Only dont flash the patch u will boot up

myaservip said:
No no no
Only dont flash the patch u will boot up
Click to expand...
Click to collapse
Sorry sir... I dont understand... can you explain more and leave me the download link...

EpullSalvatrucha said:
Sorry sir... I dont understand... can you explain more and leave me the download link...
Click to expand...
Click to collapse
Basically you should always flash a custom ROM on a stock one,
so flash a stock samsung ROM (make sure there is no secured bootloader etc...)
then wipe and install, i always do that :good:

Have you mounted /system?
Sent from my GT-S5360 using Tapatalk 2

shyamSGY said:
Have you mounted /system?
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
yes... but still not working... stuck at samsung galaxy y gts5360 screen... seem that hyperion9 very complicated than other rom...
ok here how i install hyperion9:-
reboot to recovery(cwm)
mount system/data/cache
wipe dalvik cache
wipe baterystat
wipe data
wipe cache
install zip from sdcard
install HYPERION-09.DXMJ1.GM FINAL.BUILD
reboot
Help please... i want try how hyperion9...

EpullSalvatrucha said:
yes... but still not working... stuck at samsung galaxy y gts5360 screen... seem that hyperion9 very complicated than other rom...
ok here how i install hyperion9:-
reboot to recovery(cwm)
mount system/data/cache
wipe dalvik cache
wipe baterystat
wipe data
wipe cache
install zip from sdcard
install HYPERION-09.DXMJ1.GM FINAL.BUILD
reboot
Help please... i want try how hyperion9...
Click to expand...
Click to collapse
if you followed your instructions the rom wont boot
you need to mount system data cache after you have wiped system data cache so it should be the following
wipe data
wipe system
wipe cache
mount data
mount system
mount cache
install zip from sd
select rom zip
restart

I mean the patch provided by carl dont flash it

Hyperion 9 stuck
myaservip said:
I mean the patch provided by carl dont flash it
Click to expand...
Click to collapse
I had the same issue with the first version, restored previous version,hyperion 7.x, waited installed hyperion 9 dev 3. This one installed ok, boots normally, only imei isnt showing.
Greets Peter

PBakker said:
I had the same issue with the first version, restored previous version,hyperion 7.x, waited installed hyperion 9 dev 3. This one installed ok, boots normally, only imei isnt showing.
Greets Peter
Click to expand...
Click to collapse
Maybe you can use hyperion ril fix...

myaservip said:
I mean the patch provided by carl dont flash it
Click to expand...
Click to collapse
Yes... i not flash the patch... but its still not working...

marcussmith2626 said:
if you followed your instructions the rom wont boot
you need to mount system data cache after you have wiped system data cache so it should be the following
wipe data
wipe system
wipe cache
mount data
mount system
mount cache
install zip from sd
select rom zip
restart
Click to expand...
Click to collapse
Wipe system? where can i find it? if wipe system is format system, i do it... but not working...

EpullSalvatrucha said:
Wipe system? where can i find it? if wipe system is format system, i do it... but not working...
Click to expand...
Click to collapse
you still need to mount system data cache after you have formatted it
you also need to be on a stock based kernel
9 time out of 10 if its not booting its due to user error
The only other thing that would stop it booting is an incompatible baseband but I assume you are on a recent one and therefore should have no problems

invalid argument . cant mount help pls

cm kernels working fine but
stock and stock based kernels giving this error .
how can i solve this problem? ?
error is
cant mount data
cant mount system
invalid argument
cant recovery last cache
going like this help pls (((

First format system,data and cache.Go to advanced and wipe dalvik cache and battery stats and then mount data and system.

(
aniket.lamba said:
First format system,data and cache.Go to advanced and wipe dalvik cache and battery stats and then mount data and system.
Click to expand...
Click to collapse
before installing or after installed?
because i cant format system
its giving this error
cant mount system
skipping format system
done.
??

denizarca said:
before installing or...
Click to expand...
Click to collapse
1st download the below file & put it in /sdcard/firmware/ (u ve to make a folder in the root of sdcard & name it as "firmware" .
then go to recovery, install zip from sdcard, then choose CWM, then in CWM install zip from sdcard & install the zip u ve downloaded in the /sdcard/firmware/ .Then install any rom.
note: this zip package format ur system/data/cache

1)Easy way without pc to solve the issue download multiformatter.zip (search forum) flash this zip in cwm it will open aroma installer follow the instructions and format the partitions to rfs. Close aroma mount everything and flash any rom.
2) Flash stock rom via odin. (PC reqd.)
___________________________________
««||Proud to be a geek. #lovexda||»»

good
Souroking said:
1)Easy way without pc to solve the issue download multiformatter.zip (search forum) flash this zip in cwm it will open aroma installer follow the instructions and format the partitions to rfs. Close aroma mount everything and flash any rom.
2) Flash stock rom via odin. (PC reqd.)
___________________________________
««||Proud to be a geek. #lovexda||»»
Click to expand...
Click to collapse
way 1 working fully thnxx

denizarca said:
way 1 working fully thnxx
Click to expand...
Click to collapse
No need to tell it.
Just press it...[emoji6]