hello guyz i had this problem when i flashed a kernel v3.4.0 for e612 device on cm 10.1 4.2 JB provided by pecancm on his thread that would enable deep sleep setting so i flashed it on my optimus l5 e612 device, after that i got black screen only! then i flashed a stock jb v20e but again it stuck on loading logo of lg.. i flashed it many times but remains unsolved. could any one help me ?? thanks..
twist9 said:
hello guyz i had this problem when i flashed a kernel v3.4.0 for e612 device on cm 10.1 4.2 JB provided by pecancm on his thread that would enable deep sleep setting so i flashed it on my optimus l5 e612 device, after that my got black screen only! then i flashed a stock jb v20e but again it stuck on loading logo of lg.. i flashed it many times but remains unsolvved. could any one help me ?? thanks..
Click to expand...
Click to collapse
try to hard reset it, by pressing the power key, volume down key, and home key at once. It will boot and you will see an android unpacking a box, wait for it to finish. After that your phone will be as good as new(I hope).
gamerkram said:
try to hard reset it, by pressing the power key, volume down key, and home key at once. It will boot and you will see an android unpacking a box, wait for it to finish. After that your phone will be as good as new(I hope).
Click to expand...
Click to collapse
Thanks for your reply.. I did that a minute before you replied .. I came to thought of doing a hard reset as youve said, and it worked fine now..
Sent from my LG-E610 using XDA Premium 4 mobile app
Related
I think I have brick my LG-e615 L5(Dual)
Here's what wrong did I do to reach this situation:
I was happily running a jelly-bean BHEK BHEK rom that I flashed through CWM.
I don't what got into me and I downloaded MIUI ROM for L5 E612 and flashed it.
But before that I took I installed Rom manager ( for making a nandroid backup) which had one more CWM in it. I think it some how made to CWM's and that's where the problem started . I booted from the CWM of the ROM manager, because I couldn't load my earlier one, from the reboot menu and flashed the MIUI Rom .
Now whenever I start my phone it would dispaly the LG LOGO followed by MIUI Logo and It would show the Jelly bean shutting down screen and shut down.
I tried wipe through adb that too didn't helped. I think now I can't even connect adb.
Whenever I connect my phone through USB it would show a charging screen for 3 seconds then LG logo and this goes on forever.
What should I do. Please help. I am really scared . My parents are going to kill me..!!:crying::crying::crying::crying:
rahulraina7 said:
I think I have brick my LG-e615 L5(Dual)
Here's what wrong did I do to reach this situation:
I was happily running a jelly-bean BHEK BHEK rom that I flashed through CWM.
I don't what got into me and I downloaded MIUI ROM for L5 E612 and flashed it.
But before that I took I installed Rom manager ( for making a nandroid backup) which had one more CWM in it. I think it some how made to CWM's and that's where the problem started . I booted from the CWM of the ROM manager, because I couldn't load my earlier one, from the reboot menu and flashed the MIUI Rom .
Now whenever I start my phone it would dispaly the LG LOGO followed by MIUI Logo and It would show the Jelly bean shutting down screen and shut down.
I tried wipe through adb that too didn't helped. I think now I can't even connect adb.
Whenever I connect my phone through USB it would show a charging screen for 3 seconds then LG logo and this goes on forever.
What should I do. Please help. I am really scared . My parents are going to kill me..!!:crying::crying::crying::crying:
Click to expand...
Click to collapse
I cannot go into emergency mode too..
Reply
have you tried the hard reset mode?
Torres00 said:
have you tried the hard reset mode?
Click to expand...
Click to collapse
yes. doesn't work either
You try flashing stock rom on kdz updater?
Sent from my GT-P3100 using xda app-developers app
Volume down and plug usb
Sent from my GT-P3100 using xda app-developers app
Hey guys,
I have a problem with a l5 e610.
I have flashed the device with baseband 20, CM 10.2 and pinkflozd kernel and now after the LG logo it goes to a white flashing screen. When trying to enter CWM Recovery the back and menu lights come one for a couple of seconds and then the device turns back off.
Right before I used this kernel and most things worked but overclocking.
I have tried EDM with LG PC Suite but it gives the number 43 when trying to recover the device.
Is there still hope for this device?
SliinQ said:
Hey guys,
I have a problem with a l5 e610.
I have flashed the device with baseband 20, CM 10.2 and pinkflozd kernel and now after the LG logo it goes to a white flashing screen. When trying to enter CWM Recovery the back and menu lights come one for a couple of seconds and then the device turns back off.
Right before I used this kernel and most things worked but overclocking.
I have tried EDM with LG PC Suite but it gives the number 43 when trying to recover the device.
Is there still hope for this device?
Click to expand...
Click to collapse
download your stock rom
go to emergency mode then flash it
nasheich said:
download your stock rom
go to emergency mode then flash it
Click to expand...
Click to collapse
I have flashed the stock firmware with KDZ but now after the boot animation it is stuck at the animated LG logo.
When trying to do a hard reset, it just turns back off when pressing the 3 buttons
Edit: got it working again. After flashing from another computer I was able to do a hard reset again.
Well i think i have the same problem look my screen, i realy need help!
Sent from my GT-P5110 using XDA Premium HD app
SliinQ said:
I have flashed the stock firmware with KDZ but now after the boot animation it is stuck at the animated LG logo.
When trying to do a hard reset, it just turns back off when pressing the 3 buttons
Edit: got it working again. After flashing from another computer I was able to do a hard reset again.
Click to expand...
Click to collapse
great, ...
for the future, be careful before flashing anything
read the instructions first
---------- Post added at 09:54 AM ---------- Previous post was at 09:50 AM ----------
TiboD. said:
Well i think i have the same problem look my screen, i realy need help!
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
do like he did
download your stock rom
go to emergency mode
and flash through kdz updater
make sure your computer had installed usb driver
SliinQ said:
I have flashed the stock firmware with KDZ but now after the boot animation it is stuck at the animated LG logo.
When trying to do a hard reset, it just turns back off when pressing the 3 buttons
Edit: got it working again. After flashing from another computer I was able to do a hard reset again.
Click to expand...
Click to collapse
May I ask you what do you mean by HARD RESET? How you did it?
pippo_73 said:
May I ask you what do you mean by HARD RESET? How you did it?
Click to expand...
Click to collapse
It does a factory reset. As I am not able to post links on the forums, google for e610 hard reset
Hello,
before 30 minutes I flashed the kdz file for android 4.1.2 for my region.
My problem is that my phone didnt boot since then.. it stucks at the LG logo.
What can I do?
lewin1234 said:
Hello,
before 30 minutes I flashed the kdz file for android 4.1.2 for my region.
My problem is that my phone didnt boot since then.. it stucks at the LG logo.
What can I do?
Click to expand...
Click to collapse
Im having this problem too, i tried reflashing again and again but its just stuck on the lg logo.
You'd better update directly from Lg Official website.
Just do hard reset and will boot.
VOL- POWER after lights release them and hold HOME.
lewin1234 said:
Hello,
before 30 minutes I flashed the kdz file for android 4.1.2 for my region.
My problem is that my phone didnt boot since then.. it stucks at the LG logo.
What can I do?
Click to expand...
Click to collapse
hard reset!
switch off your phone.
press vol- + home + power for some seconds, on your screen will appear the android logo and your phone come back as you bought it
Help us help you
lewin1234 said:
hello,
before 30 minutes i flashed the kdz file for android 4.1.2 for my region.
My problem is that my phone didnt boot since then.. It stucks at the lg logo.
What can i do?
Click to expand...
Click to collapse
how can we help you if you didn't tell us anything ???
DETAILS !!!
1. What phone model is it ?
Click to expand...
Click to collapse
2. Are you 100% sure the firmware is for your model ? (did you check the sticker under the battery ?)(check the name of file you have downloaded and flashed to confirm that correct one was used)
Click to expand...
Click to collapse
3. Was / is your battery full ?
Click to expand...
Click to collapse
4. What is the procedure / guide you have used to flash ?
Click to expand...
Click to collapse
5. Post answers here and wait for me or someone to answer
Click to expand...
Click to collapse
@ everyone who posted
WHAT PHONE MODEL ARE YOU TALKING ABOUT ?
Do a hard reset.. I had the same problem..
Sent from my LG-E610 using XDA Premium 4 mobile app
Installed the custom rom but error with process.android , wiped everything and installed new rom but doesnot get installed clean! and now its stuck in Logo screen HELP
The Seven said:
Installed the custom rom but error with process.android , wiped everything and installed new rom but doesnot get installed clean! and now its stuck in Logo screen HELP
Click to expand...
Click to collapse
Please be clearer.For now it looks like you've hard bricked your phone
Sent from my LG-E400 using XDA Free mobile app
Hard reset
The Seven said:
Installed the custom rom but error with process.android , wiped everything and installed new rom but doesnot get installed clean! and now its stuck in Logo screen HELP
Click to expand...
Click to collapse
Do a hard reset.
#Remove your battery,
#Hold Volume Up+Home+Power Button together
#You could see A Android Bot, a box and a progress bar,
#And it will be as good as new.
use kdz to flash stock rom
mistake in reformatting..
Detroit Inferno said:
Do a hard reset.
#Remove your battery,
#Hold Volume Up+Home+Power Button together
#You could see A Android Bot, a box and a progress bar,
#And it will be as good as new.
Click to expand...
Click to collapse
sir good day to you..
i have rooted my LGE400 a year ago..it is gong well..i learned it here and i am so happy that i have learned it here..but when i buy my new phone which is ASUS ZENFONE 5 i rooted it last night, but thats not the problem..
before the rooting of asus..my LG E400 starts normally. i have reformatted and wipe all the data in my LG that i forgot that i reformatted the sd-card already and my ROMs are gone(thats my mistake)..when i downloaded some newly ROMs for my LG because i thought that it would be the remedy and then i did the installation and the process cannot continue due to unknown error to me..it always boot looping when i start it normally but when i boot to load modified roms it says 'bad cannot continue installation - abort -"
please help me
Hi guys, I have a problem with my LG G2 16gb. Today I have upgraded CM 13 with the last nightly. After having flashed Rom and Gapps I rebooted the system. The system runs but with some bugs (dialer crashes, screen doesn't wake up anymore when it goes in standby mode). So I decided to come back to the previous nightly, but I suddenly appreciated that I can't go in recovery mode.
I can go in download mode but both Flashtool and SRKtool don't work. I really don't know how to do.
I admit that I'm not able to resolve 2% problem with the fix.
I read that if I try to flash a firmware 10A then Flashtool should work, but I didn't manage to find a mirror of it.
Someone could help me? I Would be grateful
Same problem here. Flashed from cm-13.0-20160427 to cm-13.0-20160430 and now have the same problems. Using d802 with twrp-3.0.2-0
CM is booting, but has the same bugs as written above - no dialer, once in standby screen doesnt wake up any more.
I tried to reboot in Recovery from booted CM, the Phone is hanging with the "Reboot" on Screen. Same with normal reboot or shutdown. It just hangs. The Combination with the Volume Key Down & Power wont let me in Recovery as usual.
CM13 ist really awesome and nightly to nightly it was getting better, but the nightly today just went that wrong.
Would be nice if there is some solution to get the phone back working.
Thanks a lot for any advice or help!!!
Greetings,
Feldinos
fedu89 said:
Hi guys, I have a problem with my LG G2 16gb. Today I have upgraded CM 13 with the last nightly. After having flashed Rom and Gapps I rebooted the system. The system runs but with some bugs (dialer crashes, screen doesn't wake up anymore when it goes in standby mode). So I decided to come back to the previous nightly, but I suddenly appreciated that I can't go in recovery mode.
I can go in download mode but both Flashtool and SRKtool don't work. I really don't know how to do.
I admit that I'm not able to resolve 2% problem with the fix.
I read that if I try to flash a firmware 10A then Flashtool should work, but I didn't manage to find a mirror of it.
Someone could help me? I Would be grateful
Click to expand...
Click to collapse
if the phone boots into system use flashify to install twrp..
if not maybe using srk tools. will help..
why it doesnt work flashtools?
raptorddd said:
if the phone boots into system use flashify to install twrp..
if not maybe using srk tools. will help..
why it doesnt work flashtools?
Click to expand...
Click to collapse
flashtool stops at 2%, I don't know why.
srktool doesnt know my lg g2..
fedu89 said:
Hi guys, I have a problem with my LG G2 16gb. Today I have upgraded CM 13 with the last nightly. After having flashed Rom and Gapps I rebooted the system. The system runs but with some bugs (dialer crashes, screen doesn't wake up anymore when it goes in standby mode). So I decided to come back to the previous nightly, but I suddenly appreciated that I can't go in recovery mode.
I can go in download mode but both Flashtool and SRKtool don't work. I really don't know how to do.
I admit that I'm not able to resolve 2% problem with the fix.
I read that if I try to flash a firmware 10A then Flashtool should work, but I didn't manage to find a mirror of it.
Someone could help me? I Would be grateful
Click to expand...
Click to collapse
I had some problems with booting into recovery as wel. CM13's latest nightly kept freezing my phone and I wanted to go back to my previous backup, but I couldn't boot into recovery from anywhere. Luckily I remembered that the button combination has changed with the latest bootstack I installed. It'sn now like this:
Force a shutdown by holding the power button. As soon as it goes black, press power + vol down, release as soon as the logo appears and then hold vol down + vol up. Then you should be able to get into recovery.
Thoms92 said:
Force a shutdown by holding the power button. As soon as it goes black, press power + vol down, release as soon as the logo appears and then hold vol down + vol up. Then you should be able to get into recovery.
Click to expand...
Click to collapse
Thanks a lot for that information! Almost forgotten that i had installed an new boostack as i flashed the first CM13 nightly that was released.
I was now able to get in recovery and flash 04-27 nightly. Now my phone works normal like it does before i flashed 04-30.
Greetings,
Feldinos
fedu89 said:
flashtool stops at 2%, I don't know why.
srktool doesnt know my lg g2..
Click to expand...
Click to collapse
i think that d802 stuck at 2% but wait and itll be flashed.. i think ive read that somewhere...
are you using windows 7/ usb por 2.0/
here take a look here
http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
Thoms92 said:
I had some problems with booting into recovery as wel. CM13's latest nightly kept freezing my phone and I wanted to go back to my previous backup, but I couldn't boot into recovery from anywhere. Luckily I remembered that the button combination has changed with the latest bootstack I installed. It'sn now like this:
Force a shutdown by holding the power button. As soon as it goes black, press power + vol down, release as soon as the logo appears and then hold vol down + vol up. Then you should be able to get into recovery.
Click to expand...
Click to collapse
Thank you so much for the advice! it had been so useful that I managed to get into recovery!
You saved my money, because I was starting thinking about a phone's forced change
I came back to cloudy because I wouldn't find myself in this situation once another!
raptorddd said:
i think that d802 stuck at 2% but wait and itll be flashed.. i think ive read that somewhere...
are you using windows 7/ usb por 2.0/
here take a look here
http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
Click to expand...
Click to collapse
When it reaches 2%, it suddenly appears a message telling me that my g2 is disconnected.
Unfortunately for modding, I installed w10. My pc has gotten better, but almost all the programs for modding don't work anymore. In addition to this, I didn't found drivers working well.
I'm thinking about restore w8.1.
There's a way to fix the problem of 2%, but I am not so prepared to use adb.. I'm aware about my limits
fedu89 said:
Thank you so much for the advice! it had been so useful that I managed to get into recovery!
You saved my money, because I was starting thinking about a phone's forced change
I came back to cloudy because I wouldn't find myself in this situation once another!
Click to expand...
Click to collapse
You're welcome As long as you can remember the different button combinations to get into recovery, you shouldn't be afraid to flash roms. Just never forget to make a nandroid backup before upgrading any rom!
If you start to flash roms, you WILL mess up at least once And this time, it wasn't actually your fault, CM13 messed up.
fedu89 said:
When it reaches 2%, it suddenly appears a message telling me that my g2 is disconnected.
Unfortunately for modding, I installed w10. My pc has gotten better, but almost all the programs for modding don't work anymore. In addition to this, I didn't found drivers working well.
I'm thinking about restore w8.1.
There's a way to fix the problem of 2%, but I am not so prepared to use adb.. I'm aware about my limits
Click to expand...
Click to collapse
if there is read the go back to stock in the general section.. read and if cant find answer then ,ask in the thread..
and be especific everything pc and phone..