[Q] lg e400 Custom ROM problem - Optimus L3, L5, L7 Q&A, Help & Troubleshooting

Installed the custom rom but error with process.android , wiped everything and installed new rom but doesnot get installed clean! and now its stuck in Logo screen HELP

The Seven said:
Installed the custom rom but error with process.android , wiped everything and installed new rom but doesnot get installed clean! and now its stuck in Logo screen HELP
Click to expand...
Click to collapse
Please be clearer.For now it looks like you've hard bricked your phone
Sent from my LG-E400 using XDA Free mobile app

Hard reset
The Seven said:
Installed the custom rom but error with process.android , wiped everything and installed new rom but doesnot get installed clean! and now its stuck in Logo screen HELP
Click to expand...
Click to collapse
Do a hard reset.
#Remove your battery,
#Hold Volume Up+Home+Power Button together
#You could see A Android Bot, a box and a progress bar,
#And it will be as good as new.

use kdz to flash stock rom

mistake in reformatting..
Detroit Inferno said:
Do a hard reset.
#Remove your battery,
#Hold Volume Up+Home+Power Button together
#You could see A Android Bot, a box and a progress bar,
#And it will be as good as new.
Click to expand...
Click to collapse
sir good day to you..
i have rooted my LGE400 a year ago..it is gong well..i learned it here and i am so happy that i have learned it here..but when i buy my new phone which is ASUS ZENFONE 5 i rooted it last night, but thats not the problem..
before the rooting of asus..my LG E400 starts normally. i have reformatted and wipe all the data in my LG that i forgot that i reformatted the sd-card already and my ROMs are gone(thats my mistake)..when i downloaded some newly ROMs for my LG because i thought that it would be the remedy and then i did the installation and the process cannot continue due to unknown error to me..it always boot looping when i start it normally but when i boot to load modified roms it says 'bad cannot continue installation - abort -"
please help me

Related

[Q] Please help! L7 bricked...

I was flashing a new kernel and then after reboot the phone got stuck at the LG logo. I couldn't and still can't get into recovery-mode. I tried this this and that. But nothing worked.
I can get into emergencymode though, so i tried this page, i have flashed a couple of firmware kdz-files in emergencymode. Some got errors, but the only that changed after that i got to "moving" LG logo (after i hard resetted the phone again after flashing). And when i plug the phone in my laptop i get a battery-icon. Nothing more...
I am at a loss! Can someone help me?
eeuh after like 15 times i got into CWM! Now restoring a backup, fingers crossed...
robhaans said:
eeuh after like 15 times i got into CWM! Now restoring a backup, fingers crossed...
Click to expand...
Click to collapse
:laugh::laugh:
Don't panic everytime.
DevastatingTech said:
:laugh::laugh:
Don't panic everytime.
Click to expand...
Click to collapse
update: i got into CWM and then i tried to restore data. I got one error that restoring cache didnt work. Now the phone is in a bootloop...:silly: after the lg-logo and after the cyanogenmod logo i get into android, but when the message comes "android is being upgraded" and "starting apps" (dont know if this is exactly the same in english, but in dutch it says "Android wordt bijgewerkt" and "Apps starten"), the phone restarts itself and the process starts all over again...
Strange thing is now, i cant get in CWM again! Its really bugging me.....
robhaans said:
update: i got into CWM and then i tried to restore data. I got one error that restoring cache didnt work. Now the phone is in a bootloop...:silly: after the lg-logo and after the cyanogenmod logo i get into android, but when the message comes "android is being upgraded" and "starting apps" (dont know if this is exactly the same in english, but in dutch it says "Android wordt bijgewerkt" and "Apps starten"), the phone restarts itself and the process starts all over again...
Strange thing is now, i cant get in CWM again! Its really bugging me.....
Click to expand...
Click to collapse
Can you enter emergency mode?
If yes, use lg official b2capp program and flash again everything by your IMEI.
DevastatingTech said:
Can you enter emergency mode?
If yes, use lg official b2capp program and flash again everything by your IMEI.
Click to expand...
Click to collapse
yes, i can get into emergencymode. But the B2Capp program freezes after it tries to find an update... Now trying LG PCsuite...
[edit] LG PC Suite cant find the phone. Now back to kdz-files...
ok, im at a dead end:
- i can get in emergencymode, not in recovery;
- i can install kdz-files from laptop with the phone in emergency-mode, but only the official kdz-files are installed without errors. All other options for installing firmware from a pc fail, i cant get it installed (b2capps) or i can but the program doesn't recognize the form (lg pc suite). Flashing new CWM from laptop failed also.
- even with kdz-files installer android doesn't go past second boot screen (the live one). I got past it once, but i cant repeat the process. i got to CWM then, but when i tried to restore a backup it got in a bootloop. After that all attempts getting past bootscreen have failed.
I got my old phone back, but if somebody has a idea how to revive the LG i'll appreciate it! Right now i'm considering it bricked.
Try To reflash it with LG Software update tool (not PC suite) in emergency mode (voldown and plug in USB) if this won't work i can't help you
Sent from my LG-P700 using xda premium

[Q] LG Optimus L3 E405 Recovery Dead?

Hello,
This morning I tried to root my phone so that I can force everything to be moved to a sd card since the storage of the system is low not enough to install apps and to install A mod that is more updated then the current GingerBread OS.
I managed to soft brick the device the rom clearly said e405 obviously the developer has a few bugs anyway I manage to recover from my soft brick by A software 'KDZ' Only issue I have now is when I press volume up on boot I get A notice icon trying to say something (image of the icon is attached below) and when I use ROM Manager to reboot to recovery it will attempt to go there, Instead of going to recovery it goes to A loading page then this erases all my data/apps except SuperUser/Root.
Tried everything and it still does it?
When I use the LG Emergency Software it just goes to a page saying not responding??
Any help and ideas would be grateful so I can fix this issue and move on also im mostly A samsung user and im fairly new to lg.
See thee error message below
Once i get the idea of what the icon is actually trying to say I should be in the right direction.
Thanks,
Spudster
umm
Anyone??
Spudster1 said:
Anyone??
Click to expand...
Click to collapse
Perhaps you can go to ROM Manager, uninstall Recovery, then re-install it?
I don't really know. I'm sorta new to this stuff.
hard reset
Spudster1 said:
Hello,
This morning I tried to root my phone so that I can force everything to be moved to a sd card since the storage of the system is low not enough to install apps and to install A mod that is more updated then the current GingerBread OS.
I managed to soft brick the device the rom clearly said e405 obviously the developer has a few bugs anyway I manage to recover from my soft brick by A software 'KDZ' Only issue I have now is when I press volume up on boot I get A notice icon trying to say something (image of the icon is attached below) and when I use ROM Manager to reboot to recovery it will attempt to go there, Instead of going to recovery it goes to A loading page then this erases all my data/apps except SuperUser/Root.
Tried everything and it still does it?
When I use the LG Emergency Software it just goes to a page saying not responding??
Any help and ideas would be grateful so I can fix this issue and move on also im mostly A samsung user and im fairly new to lg.
See thee error message below
Once i get the idea of what the icon is actually trying to say I should be in the right direction.
Thanks,
Spudster
Click to expand...
Click to collapse
I saw that icon after flashing back to stock rom with KDZ and a hard reset worked for me. Pull the battery, make sure you not connected to USB or charger, then press and hold home key and down volume while you press power on. Release power when you see LG logo, hold the down and home for a while until you see android unpacking a box. It takes about a minute to see this, so you gotta wait for it. The phone reboots or shut downs, don't rememberwhich
reply
kurtstraker said:
I saw that icon after flashing back to stock rom with KDZ and a hard reset worked for me. Pull the battery, make sure you not connected to USB or charger, then press and hold home key and down volume while you press power on. Release power when you see LG logo, hold the down and home for a while until you see android unpacking a box. It takes about a minute to see this, so you gotta wait for it. The phone reboots or shut downs, don't rememberwhich
Click to expand...
Click to collapse
Ok I will try that and let you know if it works in a few hours I gave the phone to my brother for free since I bought A samsung (used to samsungs and love then
Anyway should also mention that when I try to reboot into recovery with rom manager it reboots goes to the loading box thing then it wipes my data Like i said I tried that method in a few hours and get back to you here.
nope
didn't work ;.(
Man go to the screen u have posted the images above , then use KDZ to flash back Man!
This is "DIAG MODE" so select it in KDZ program
So select KDZ file ( download if u have tried urs so far)
No error .. when u click to start upgrade ur phone will apper in emergency mode. Then the KDZ will flash flawslessly
Sent From ... Lg e400 <-- {[Brasilian Here]}
Still didnt work it flash though but still didnt fix the recovery..
These lg are actually useless a simple firmware flash should do the job.
LG staff are also rude to be honest rang up and because I tried to root and I was doing the right thing going back to stock they denied support and hang up without me giving A reply. Glad ive switched back to samsung s4 and Apple IPhone 5C.
Thanks for attempting to help :.)

[Q] Help I think I have bricked my LG E615. Scared. Bootloop

I think I have brick my LG-e615 L5(Dual)
Here's what wrong did I do to reach this situation:
I was happily running a jelly-bean BHEK BHEK rom that I flashed through CWM.
I don't what got into me and I downloaded MIUI ROM for L5 E612 and flashed it.
But before that I took I installed Rom manager ( for making a nandroid backup) which had one more CWM in it. I think it some how made to CWM's and that's where the problem started . I booted from the CWM of the ROM manager, because I couldn't load my earlier one, from the reboot menu and flashed the MIUI Rom .
Now whenever I start my phone it would dispaly the LG LOGO followed by MIUI Logo and It would show the Jelly bean shutting down screen and shut down.
I tried wipe through adb that too didn't helped. I think now I can't even connect adb.
Whenever I connect my phone through USB it would show a charging screen for 3 seconds then LG logo and this goes on forever.
What should I do. Please help. I am really scared . My parents are going to kill me..!!:crying::crying::crying::crying:
rahulraina7 said:
I think I have brick my LG-e615 L5(Dual)
Here's what wrong did I do to reach this situation:
I was happily running a jelly-bean BHEK BHEK rom that I flashed through CWM.
I don't what got into me and I downloaded MIUI ROM for L5 E612 and flashed it.
But before that I took I installed Rom manager ( for making a nandroid backup) which had one more CWM in it. I think it some how made to CWM's and that's where the problem started . I booted from the CWM of the ROM manager, because I couldn't load my earlier one, from the reboot menu and flashed the MIUI Rom .
Now whenever I start my phone it would dispaly the LG LOGO followed by MIUI Logo and It would show the Jelly bean shutting down screen and shut down.
I tried wipe through adb that too didn't helped. I think now I can't even connect adb.
Whenever I connect my phone through USB it would show a charging screen for 3 seconds then LG logo and this goes on forever.
What should I do. Please help. I am really scared . My parents are going to kill me..!!:crying::crying::crying::crying:
Click to expand...
Click to collapse
I cannot go into emergency mode too..
Reply
have you tried the hard reset mode?
Torres00 said:
have you tried the hard reset mode?
Click to expand...
Click to collapse
yes. doesn't work either
You try flashing stock rom on kdz updater?
Sent from my GT-P3100 using xda app-developers app
Volume down and plug usb
Sent from my GT-P3100 using xda app-developers app

[Q] Stuck at Boot / Nothing working anymore.

EDIT:
UPDATED POST AT THE BOTTOM!
Hey guys,
flashed czechops CM 10.2 a while ago everything was running fine.
On Saturday i decided to let the battery drain completely to do a full recharge. That`s when the Problems started.
After booting the Phone up i was stuck in a Bootloop with the Cyanogenmod Logo turning around and around and around and so on.
Okay i thought let`s reboot and see what happens.
Still the same.
I then booted into recovery by holding the x button on the keyboard and power and then when the androind in the triangle showed up using vol + and vol - to get into recovery.
I then deleted the cache and rebooted again (No full wipe to factory default trying to avoid that).
After that the phone turned on saying Android is getting updated Updating Package x of y.
After its done its now stuck in Apps getting started.
After i found out to get to the Bootmenu i decided to check the Recovery Menu there.
I can choose between Motorola Stock Recovery (the normal one i already was on)
and Team Win Recovery.
So i choose Team Win Recovery and thought okay since its not working im gonna install the Update of czechops 10.2
Installing itself worked fine. But now im stuck in the same loops.
Currently im goind a Backup of the System with the Team Win Recovery in the hope i wont loose the data even if what im trying to avoid a full factory wipe.
What kinda poped in my eyes when i started the recovery was that it said E: Unable to locate '/boot' partition for backup.
Could this be the problem which is stopping the phone from booting correctly?
And if so how can i fix it?
Hope anyone can help me,
Kind Regards,
Invi
I had te same problem before doing a clean install.
I don't know why but, if you install the android 10.0 tezet and from there start the gapps, creating a account and installing your apps, you do not have problems to install the 10.2.
Good luck.
Sent from my A953 using xda app-developers app
jonasgitz said:
I had te same problem before doing a clean install.
I don't know why but, if you install the android 10.0 tezet and from there start the gapps, creating a account and installing your apps, you do not have problems to install the 10.2.
Good luck.
Sent from my A953 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the heads up jonas.
Unfortunately its too late its seems. My Milestone is just a stone now it seems.
After trying to install 10.2 12.03.14 and that not working correct after doing a full factory wipe i decided to install cm 11 from czechop.
Unfortunately it seems it failed.
My milestone just boots up and stops at the First Logo. No lights. No chance to get in any recovery mode except the normal one.
Bootloader was working some time but stopped cause the Battery is almost empty.
The Problem is i cant even load the Phone anymore cause as soon as i put it on a charger it boots up and wont get enough battery power to live for a few minutes.
So the only thing left working is the normal Android 3e Recovery. Hope i can do anything from there.
Don't give up.
Your problem it's normal, you fisrt need a global battery charger to recharge your battery.
After it, go to boot recovery, you must turn on the milestone holding " volume down + camera" or "volume up + camera", than you need to uses the RSD Lite to reflash your milestone 2.
Normaly, when do you came from another room, you stay in boot loop, so you need to entery in Miestone recovery, "x + volume down" than after it you do a factory reset. It will boot normaly after that.
To go to boot recovery, you must turn on.
Try harder.
(Guys, lets try to help a little)
Sorry about my poor english
I wont. Already ordered an global battery charger yesterday. In the mail from the store delivery is 7-10 Weekdays.
Good thing i have a second cellphone which i can use in the meantime.
i had a similar scenario
Invisan said:
Thanks for the heads up jonas.
Unfortunately its too late its seems. My Milestone is just a stone now it seems.
After trying to install 10.2 12.03.14 and that not working correct after doing a full factory wipe i decided to install cm 11 from czechop.
Unfortunately it seems it failed.
My milestone just boots up and stops at the First Logo. No lights. No chance to get in any recovery mode except the normal one.
Bootloader was working some time but stopped cause the Battery is almost empty.
The Problem is i cant even load the Phone anymore cause as soon as i put it on a charger it boots up and wont get enough battery power to live for a few minutes.
So the only thing left working is the normal Android 3e Recovery. Hope i can do anything from there.
Click to expand...
Click to collapse
hi, I had a similar situation to that earlier today, in that I got to the situation where on boot up I got the Motorola logo then nothing else (I was trying to install C.M. 11 from 10.2 but when it went to install got a message E;// error - verification signature installation aborted), after major panic thinking I'd bricked my milestone, I tried starting the phone in bootloader mode (press camera, volume up and power buttons at the same time) which gives a black screen saying boot loader 70.13 and towards the bottom says boot menu, connect USB, then on your pc find program MOTOROLA SOFTWARE UPDATER (hope you've got it) open the program, it'll say connect a device plug your phone in and let it do it's stuff, takes about an hour (charge your battery using a desktop battery charger beforehand) and your phone will be returned to the stock Motorola rom but at least your phone isn't a brick and you can always start again trying cyanogenmod.
hope this helps
mark13_2001 said:
hi, I had a similar situation to that earlier today, in that I got to the situation where on boot up I got the Motorola logo then nothing else (I was trying to install C.M. 11 from 10.2 but when it went to install got a message E;// error - verification signature installation aborted), after major panic thinking I'd bricked my milestone, I tried starting the phone in bootloader mode (press camera, volume up and power buttons at the same time) which gives a black screen saying boot loader 70.13 and towards the bottom says boot menu, connect USB, then on your pc find program MOTOROLA SOFTWARE UPDATER (hope you've got it) open the program, it'll say connect a device plug your phone in and let it do it's stuff, takes about an hour (charge your battery using a desktop battery charger beforehand) and your phone will be returned to the stock Motorola rom but at least your phone isn't a brick and you can always start again trying cyanogenmod.
hope this helps
Click to expand...
Click to collapse
So i downloaded Motorola Software Updater and RSD Lite + Motorola Device Manager newest Version
Unfortunately my Milestone seems not to be recognized by either Software updater nor RSD Lite.
In the Device Manager S Flash OMAP3630 shows up and is recognized.
Im running Windows 8.1 x64 and on a second Computer Windows 7 x64
What tool can i use ander Linux? Maybe the Phone will be recognized there.
EDIT:
K found it. Doing it with Linux at the Moment. Its working.
Only need to Root it then and after that flash my old Files and hope they are working.
At least i have an old Backup i made from Tezet before going up to 10.2 which i made with Clockworkmod
Hope it will work and not be broken like the one i made with Team Win Recovery.
Anyone knows how i can change stuff in a Team Win Backup?
Invisan said:
So i downloaded Motorola Software Updater and RSD Lite + Motorola Device Manager newest Version
Unfortunately my Milestone seems not to be recognized by either Software updater nor RSD Lite.
In the Device Manager S Flash OMAP3630 shows up and is recognized.
Im running Windows 8.1 x64 and on a second Computer Windows 7 x64
What tool can i use ander Linux? Maybe the Phone will be recognized there.
EDIT:
K found it. Doing it with Linux at the Moment. Its working.
Only need to Root it then and after that flash my old Files and hope they are working.
At least i have an old Backup i made from Tezet before going up to 10.2 which i made with Clockworkmod
Hope it will work and not be broken like the one i made with Team Win Recovery.
Anyone knows how i can change stuff in a Team Win Backup?
Click to expand...
Click to collapse
I did find it took a long time for the Motorola software updater (about 20 mins) to detect my milestone 2 (I'm using windows7 x64), I'm thinking the mistake I made when trying to upgrade to CM 11 was I didn't wipe data/cache before trying to install it
mark13_2001 said:
I did find it took a long time for the Motorola software updater (about 20 mins) to detect my milestone 2 (I'm using windows7 x64), I'm thinking the mistake I made when trying to upgrade to CM 11 was I didn't wipe data/cache before trying to install it
Click to expand...
Click to collapse
Hi mark,
well Windows popped up saying N/A
when it should show new Software.
It also couldnt recognize my Cellphone correctly it seemed.
But i flashed it with Linux anyways.
Flashing to tezet`s 10 worked also like a charm
and i could install my Backup i made in december before
updating to czechops 10.2.
Guess after i know what to do now i will try to update to cm11 now.
Invisan said:
Hi mark,
well Windows popped up saying N/A
when it should show new Software.
It also couldnt recognize my Cellphone correctly it seemed.
But i flashed it with Linux anyways.
Flashing to tezet`s 10 worked also like a charm
and i could install my Backup i made in december before
updating to czechops 10.2.
Guess after i know what to do now i will try to update to cm11 now.
Click to expand...
Click to collapse
let us know how you get on as I'm tempted to try again (I do like how CM10 gets rid of all the un-necessary apps but gives you control of all the system parameters) but want to step up to CM11 without having the same problem as before.

[Q] Hard bricked G2 after flash

Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.
Eijo said:
Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.
Click to expand...
Click to collapse
same here after flashing the wrong kernel, and tried with the good one using fastboot....
please help!
darkflyer1983 said:
same here after flashing the wrong kernel, and tried with the good one using fastboot....
please help!
Click to expand...
Click to collapse
At least I'm not alone :laugh:
I found this thread but haven't tried yet. Don't know if the problem is similar.
I really hope the phone isn't dead, it's almost brand new
This is exactly what I have . The main problem is we can not see phone partitions. Always the alarm "can not access " or "format" !Waiting for some body to help restaure our LG G2.
3205
Are you still under warranty. If you can't get into download mode that means that LG won't be able to either. You could process a return directly from LG.
Problem solved ...
Somehow I did manage to hard reset (vol - & power, wait for LG logo, release and then press vol - & power again) and then access recovery mode, so I did restore my backup (which had been renamed to ... 1970-05-01 ! lol) and my G2 is now back to life.
Weirdest thing ever... Kinda worried about flashing it again now !
Thing to remember : always have a backup file.
You are lucky man! I've done it but nothing after. I can access to hard reset but when I push power button the screen goes black as before ....
Is it actually in "Download Mode"?
GeneralMills777 said:
Are you still under warranty. If you can't get into download mode that means that LG won't be able to either. You could process a return directly from LG.
Click to expand...
Click to collapse
So, if my G2 shows "Download Mode" on the screen with the little white dots, but it's not recognized by Windows 7, Ubuntu, or Knoppix, and is for all intents and purposes, non-responsive, does anyone know if it's actually in "Download Mode"?
Eijo said:
Somehow I did manage to hard reset (vol - & power, wait for LG logo, release and then press vol - & power again) and then access recovery mode, so I did restore my backup (which had been renamed to ... 1970-05-01 ! lol) and my G2 is now back to life.
Weirdest thing ever... Kinda worried about flashing it again now !
Thing to remember : always have a backup file.
Click to expand...
Click to collapse
Peperepe said:
You are lucky man! I've done it but nothing after. I can access to hard reset but when I push power button the screen goes black as before ....
Click to expand...
Click to collapse
In my case, it just stuck on the same screen. Nothing moves.
honest1212 said:
In my case, it just stuck on the same screen. Nothing moves.
Click to expand...
Click to collapse
same problem here:
+ Download mode with some blue dot and nothing move, PC has no usb connection detected
+ Stuck on the LG logo screen with normal boot
+ NO recovery
+ it does FACTORY RESET but keep processing and nothing happen
Helped me, too.
Eijo said:
Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.
Click to expand...
Click to collapse
hi dude , i had the same issue , and i lost my g2 cause of it , please dont mess with the partitions , to all of you please dont delete the partitions , just turn off your phone , press volume up and push usb cable you ll get into download mode , from there yo can go back to stock by the .tot flashing method or kdz but dont mess with partitions , i deleted partitions and my phone wad totally dead , no one could repair it
Something happened to me today...
Sent from my LG-D802 using XDA Free mobile app

Categories

Resources