Hi guys, I have a problem with my LG G2 16gb. Today I have upgraded CM 13 with the last nightly. After having flashed Rom and Gapps I rebooted the system. The system runs but with some bugs (dialer crashes, screen doesn't wake up anymore when it goes in standby mode). So I decided to come back to the previous nightly, but I suddenly appreciated that I can't go in recovery mode.
I can go in download mode but both Flashtool and SRKtool don't work. I really don't know how to do.
I admit that I'm not able to resolve 2% problem with the fix.
I read that if I try to flash a firmware 10A then Flashtool should work, but I didn't manage to find a mirror of it.
Someone could help me? I Would be grateful
Same problem here. Flashed from cm-13.0-20160427 to cm-13.0-20160430 and now have the same problems. Using d802 with twrp-3.0.2-0
CM is booting, but has the same bugs as written above - no dialer, once in standby screen doesnt wake up any more.
I tried to reboot in Recovery from booted CM, the Phone is hanging with the "Reboot" on Screen. Same with normal reboot or shutdown. It just hangs. The Combination with the Volume Key Down & Power wont let me in Recovery as usual.
CM13 ist really awesome and nightly to nightly it was getting better, but the nightly today just went that wrong.
Would be nice if there is some solution to get the phone back working.
Thanks a lot for any advice or help!!!
Greetings,
Feldinos
fedu89 said:
Hi guys, I have a problem with my LG G2 16gb. Today I have upgraded CM 13 with the last nightly. After having flashed Rom and Gapps I rebooted the system. The system runs but with some bugs (dialer crashes, screen doesn't wake up anymore when it goes in standby mode). So I decided to come back to the previous nightly, but I suddenly appreciated that I can't go in recovery mode.
I can go in download mode but both Flashtool and SRKtool don't work. I really don't know how to do.
I admit that I'm not able to resolve 2% problem with the fix.
I read that if I try to flash a firmware 10A then Flashtool should work, but I didn't manage to find a mirror of it.
Someone could help me? I Would be grateful
Click to expand...
Click to collapse
if the phone boots into system use flashify to install twrp..
if not maybe using srk tools. will help..
why it doesnt work flashtools?
raptorddd said:
if the phone boots into system use flashify to install twrp..
if not maybe using srk tools. will help..
why it doesnt work flashtools?
Click to expand...
Click to collapse
flashtool stops at 2%, I don't know why.
srktool doesnt know my lg g2..
fedu89 said:
Hi guys, I have a problem with my LG G2 16gb. Today I have upgraded CM 13 with the last nightly. After having flashed Rom and Gapps I rebooted the system. The system runs but with some bugs (dialer crashes, screen doesn't wake up anymore when it goes in standby mode). So I decided to come back to the previous nightly, but I suddenly appreciated that I can't go in recovery mode.
I can go in download mode but both Flashtool and SRKtool don't work. I really don't know how to do.
I admit that I'm not able to resolve 2% problem with the fix.
I read that if I try to flash a firmware 10A then Flashtool should work, but I didn't manage to find a mirror of it.
Someone could help me? I Would be grateful
Click to expand...
Click to collapse
I had some problems with booting into recovery as wel. CM13's latest nightly kept freezing my phone and I wanted to go back to my previous backup, but I couldn't boot into recovery from anywhere. Luckily I remembered that the button combination has changed with the latest bootstack I installed. It'sn now like this:
Force a shutdown by holding the power button. As soon as it goes black, press power + vol down, release as soon as the logo appears and then hold vol down + vol up. Then you should be able to get into recovery.
Thoms92 said:
Force a shutdown by holding the power button. As soon as it goes black, press power + vol down, release as soon as the logo appears and then hold vol down + vol up. Then you should be able to get into recovery.
Click to expand...
Click to collapse
Thanks a lot for that information! Almost forgotten that i had installed an new boostack as i flashed the first CM13 nightly that was released.
I was now able to get in recovery and flash 04-27 nightly. Now my phone works normal like it does before i flashed 04-30.
Greetings,
Feldinos
fedu89 said:
flashtool stops at 2%, I don't know why.
srktool doesnt know my lg g2..
Click to expand...
Click to collapse
i think that d802 stuck at 2% but wait and itll be flashed.. i think ive read that somewhere...
are you using windows 7/ usb por 2.0/
here take a look here
http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
Thoms92 said:
I had some problems with booting into recovery as wel. CM13's latest nightly kept freezing my phone and I wanted to go back to my previous backup, but I couldn't boot into recovery from anywhere. Luckily I remembered that the button combination has changed with the latest bootstack I installed. It'sn now like this:
Force a shutdown by holding the power button. As soon as it goes black, press power + vol down, release as soon as the logo appears and then hold vol down + vol up. Then you should be able to get into recovery.
Click to expand...
Click to collapse
Thank you so much for the advice! it had been so useful that I managed to get into recovery!
You saved my money, because I was starting thinking about a phone's forced change
I came back to cloudy because I wouldn't find myself in this situation once another!
raptorddd said:
i think that d802 stuck at 2% but wait and itll be flashed.. i think ive read that somewhere...
are you using windows 7/ usb por 2.0/
here take a look here
http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
Click to expand...
Click to collapse
When it reaches 2%, it suddenly appears a message telling me that my g2 is disconnected.
Unfortunately for modding, I installed w10. My pc has gotten better, but almost all the programs for modding don't work anymore. In addition to this, I didn't found drivers working well.
I'm thinking about restore w8.1.
There's a way to fix the problem of 2%, but I am not so prepared to use adb.. I'm aware about my limits
fedu89 said:
Thank you so much for the advice! it had been so useful that I managed to get into recovery!
You saved my money, because I was starting thinking about a phone's forced change
I came back to cloudy because I wouldn't find myself in this situation once another!
Click to expand...
Click to collapse
You're welcome As long as you can remember the different button combinations to get into recovery, you shouldn't be afraid to flash roms. Just never forget to make a nandroid backup before upgrading any rom!
If you start to flash roms, you WILL mess up at least once And this time, it wasn't actually your fault, CM13 messed up.
fedu89 said:
When it reaches 2%, it suddenly appears a message telling me that my g2 is disconnected.
Unfortunately for modding, I installed w10. My pc has gotten better, but almost all the programs for modding don't work anymore. In addition to this, I didn't found drivers working well.
I'm thinking about restore w8.1.
There's a way to fix the problem of 2%, but I am not so prepared to use adb.. I'm aware about my limits
Click to expand...
Click to collapse
if there is read the go back to stock in the general section.. read and if cant find answer then ,ask in the thread..
and be especific everything pc and phone..
Related
i Was trying to get rid of the hissing noise on my
Lg g2 D802
i had TWRP installed
I read in a trhead that flashing the dorimanx kernel should fix that problem.
So i tried flash it, but instead of flashing the D802 i flashed the D800, i know i'm an idiot :/
I had a backup stock kernel but i think that's a wrong one too, again i'm an idiot
Now my phone boots into a black screen within the left top corner:
[2800] Fastboot mode started
[2850] udc_start()
i cannot boot into twrp anymore, it's basically bricked.
Can anyone help me recover my phone? i loved that thing, you will be my hero.
i promise when this is resolved i will never mess around with roms and kernels ever agian, i'm freaking out
henny420 said:
i Was trying to get rid of the hissing noise on my
Lg g2 D802
i had TWRP installed
I read in a trhead that flashing the dorimanx kernel should fix that problem.
So i tried flash it, but instead of flashing the D802 i flashed the D800, i know i'm an idiot :/
I had a backup stock kernel but i think that's a wrong one too, again i'm an idiot
Now my phone boots into a black screen within the left top corner:
[2800] Fastboot mode started
[2850] udc_start()
i cannot boot into twrp anymore, it's basically bricked.
Can anyone help me recover my phone? i loved that thing, you will be my hero.
i promise when this is resolved i will never mess around with roms and kernels ever agian, i'm freaking out
Click to expand...
Click to collapse
Try to flash back to stock with kdz, as far as I am hearing this you kinda soft bricked it but not hard so it's still recoverable, you could also maybe try to flash your recovery back with fastboot since your in fastboot mode but I never tried that so I suggest you to go back to stock with kdz flashing
ye try enter download mode and follow this (use search) i think its volum up and connect usb to pc
http://forum.xda-developers.com/showthread.php?t=2432476
wulsic said:
Try to flash back to stock with kdz, as far as I am hearing this you kinda soft bricked it but not hard so it's still recoverable, you could also maybe try to flash your recovery back with fastboot since your in fastboot mode but I never tried that so I suggest you to go back to stock with kdz flashing
Click to expand...
Click to collapse
thank you for your response, but i am kind of noob and have no idea how to do that correctly, could you link something or explain it?
henny420 said:
thank you for your response, but i am kind of noob and have no idea how to do that correctly, could you link something or explain it?
Click to expand...
Click to collapse
Try the link above mentioned by Overclocked
OverClockeD_GR said:
ye try enter download mode and follow this (use search) i think its volum up and connect usb to pc
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Thank you for your reply, i tried to get into download mode, but failed every time, i can only press the power button for 5 sec and the Lg logo apears, then i get the same screen.
did this way?
Your phone must be turned off before starting the steps from this guide.
So, press power button and select “power off”.
Then, press the volume up button on your LG G2.
While you are holding the volume up button, plug in your phone’s USB cable.
Keep pressing the Volume up button until the download mode is being displayed.
Now the phone will install some drivers – it should take around 10 minutes to complete; the best will be to let your device install the mentioned drivers.
OverClockeD_GR said:
did this way?
Your phone must be turned off before starting the steps from this guide.
So, press power button and select “power off”.
Then, press the volume up button on your LG G2.
While you are holding the volume up button, plug in your phone’s USB cable.
Keep pressing the Volume up button until the download mode is being displayed.
Now the phone will install some drivers – it should take around 10 minutes to complete; the best will be to let your device install the mentioned drivers.
Click to expand...
Click to collapse
the problem is, i can't turn it off (very weird) it instantly gives me the logo for 1sec and turns back to the same screen.
you can also try this.
http://forum.xda-developers.com/showthread.php?t=2477595
just use search mate like i do now... its soft brick i think relax and you will find it many had same prob before
henny420 said:
i Was trying to get rid of the hissing noise on my
Lg g2 D802
i had TWRP installed
I read in a trhead that flashing the dorimanx kernel should fix that problem.
So i tried flash it, but instead of flashing the D802 i flashed the D800, i know i'm an idiot :/
I had a backup stock kernel but i think that's a wrong one too, again i'm an idiot
Now my phone boots into a black screen within the left top corner:
[2800] Fastboot mode started
[2850] udc_start()
i cannot boot into twrp anymore, it's basically bricked.
Can anyone help me recover my phone? i loved that thing, you will be my hero.
i promise when this is resolved i will never mess around with roms and kernels ever agian, i'm freaking out
Click to expand...
Click to collapse
I did the same thing today by accident. I still can boot into recovery tho, TWRP. Copied the correct kernel file via OTG but it just reboots the recovery and doesn't install the kernel. Have you find any solutions?
EDIT: I actually managed to flash the right kernel and the problem is now fixed. Check everything before flashing something guys, caution
Hello,
I loaded my SM-G900F with a custom rom and it suddenly died... There is no way to switch it on and when I connect it to my laptop it shows QHSUSB_BULK under device manager. I read a lot of posts and I understand that I need an unbrick image to boot from an sd card. Is that the right thing to do?
I would really appreciate is somebody could help.
Thanks in advance!
buralbe
What rom, and what version were you on when you started? Which recovery, and which version do you have loaded? What, exactly was the procedure you followed, and what version of which custom rom did you try to flash?
hexavoodoomal said:
What rom, and what version were you on when you started? Which recovery, and which version do you have loaded? What, exactly was the procedure you followed, and what version of which custom rom did you try to flash?
Click to expand...
Click to collapse
Hi hexavoodoomal!
Thanks for replying to my message. The ROM was Sixperience 7.0. I am not sure about the recovery... I am sure I had TWRP installed.
Everything was working fine. The ROM installed properly and worked with no problems for a couple of days but suddenly the phone died. I am sure that it was updating something from Samsung. ANT+ may be?
Can you help?
Thanks!!
buralbe said:
Hi hexavoodoomal!
Thanks for replying to my message. The ROM was Sixperience 7.0. I am not sure about the recovery... I am sure I had TWRP installed.
Everything was working fine. The ROM installed properly and worked with no problems for a couple of days but suddenly the phone died. I am sure that it was updating something from Samsung. ANT+ may be?
Can you help?
Thanks!!
Click to expand...
Click to collapse
I hope so. Can you boot into recovery by removing the battery, and waiting for 10 secs, replacing the battery, and depressing the volume down button, the home button, and the power on button all at the same time?
hexavoodoomal said:
I hope so. Can you boot into recovery by removing the battery, and waiting for 10 secs, replacing the battery, and depressing the volume down button, the home button, and the power on button all at the same time?
Click to expand...
Click to collapse
No. I cannot boot in recovery mode. I tried several times...
Volume down is download mode
Volume up is recovery
A ROM can not break download mode, it's hard coded into the hardware, if removing the battery hasn't worked, power it on, and hold the power button for 30 seconds, remove the battery for 30 seconds, replace and try again
Oops, ha-ha. I called it recovery' didn't I? My bad. Get into download mode, follow the prompt, get odin, and flash the stock ROM for your phone. You can find links to the latest firmware on this site. There are other sites that have it too, but yiur best served geting it here. That will get you back where you started.
Hello, cutting to the chase
Model: LG G2 D802
Story time: I tried to install ressurection remix rom through the sideload, after fully wiping my phone ( Wiped system, data, yada yada ) it showed some kind of an error about SU not installing properly, I thought well if I'll reboot TWRP will automaticly install SU for me, so when I tried to reboot it showed that No OS is installed, I thought it's a simple bug so I'll reboot to recovery again to check and bam. Nothing works.
+ Can't boot into recovery ( Tried volume down + power button ) LG Logo shows up and goes blank again ( Note that the screen doesn't turn off, just stays black, after holding it for a couple of seconds I can see screen going off completely but can't turn it on)
+ Can't turn it on normally.
+ Can't boot into download mode.
+After plugging it into an USB it mounts a D lettered drive with 63MB stuff in a folder called image with *.mdt files, modem files( I can screen it if it's important )
I'm clueless, never happened to me even though I flashed a lot of roms, I think I bricked it. Help?
UPDATE: I managed to quickly release Volume Down And Power buttons when LG appeared for half a second and hold it again, succesfully booted into TWRP. I haven't bricked it I think. Will tell how it goes <3
Hey man, how'd it go?
I'm in exactly the same situation as yours, can boot into twrp but nothing else works, i fear of the qhsusb_bulk brick but these people don't even seem to have recovery.
Any suggestions? Go back to stock? How?
Argus137 said:
UPDATE: I managed to quickly release Volume Down And Power buttons when LG appeared for half a second and hold it again, succesfully booted into TWRP. I haven't bricked it I think. Will tell how it goes <3
Click to expand...
Click to collapse
How did it go!? I'm in a similar situation (but can boot into download-mode). Would love to get back to twrp, since I want to give it a try to flash another cm (stable). Thanks for sharing your experience...
If its picking up bulk mode normally its hard bricked there is a guide for restore nearly all g2s from hard brick having done it myself included 1st time took me a week to get back up but. Now i prob take about 45 min just cause i aint had one in a while
TheMadScientist420 said:
If its picking up bulk mode normally its hard bricked there is a guide for restore nearly all g2s from hard brick having done it myself included 1st time took me a week to get back up but. Now i prob take about 45 min just cause i aint had one in a while
Click to expand...
Click to collapse
Hey there, can you specify what you did exactly or where to find!? Do you mean something like this? (can't post outside links, in XDA-forum, title is "LG G2 is UNBRICKABLE NOW! [FIX REAL HARD BRICK]") Thanks for help...
Yes thats it. Lol i still got the files on my pc for my g2 i keep the whe setup cause im on the g3 now i just check in the g2 forums cause i had mine for 2 years and modded the crap outa it but yea i keep all the files on hand so if anything ever happens i can fix it almost on the fly now
Well so what happened to me that I managed to get inside the TWRP. When it lighed it up for a second I quickly released and held again that got me inside magically. So then I just transfered new rom and tried to install again. Sadly I didin't see that the ROM Im trying to install requires bump TWRP and I bricked my phone again. Though I entered download mode and flashed the stock rom through LG G2 flasher.
heres a video i made, how to go into recovery. for those that cant get in to twrp.
https://www.youtube.com/watch?v=jPUTImVEHqc
Hi guys,
this is my first x compact. I unlocked the bootloader per sony's instructions on their site + what I read here.
I flashed twrp, booted to recovery, and wiped and installed the lineage 16.0 which is stickied.
Everything worked great but various rootcheckers said still not rooted. This bothered me.
I followed the thread (https://forum.xda-developers.com/x-compact/how-to/stock-8-0-root-recovery-t3747479).
I used flashtool to flash stock oreo. After that, bootloops. And can't access recovery.
I can still enter flash mode and fastboot mode, but using the CMD in platform-tools, phone not recognized.
There must be something I can do? Thank you.
pleasuremann said:
Hi guys,
this is my first x compact. I unlocked the bootloader per sony's instructions on their site + what I read here.
I flashed twrp, booted to recovery, and wiped and installed the lineage 16.0 which is stickied.
Everything worked great but various rootcheckers said still not rooted. This bothered me.
I followed the thread (https://forum.xda-developers.com/x-compact/how-to/stock-8-0-root-recovery-t3747479).
I used flashtool to flash stock oreo. After that, bootloops. And can't access recovery.
I can still enter flash mode and fastboot mode, but using the CMD in platform-tools, phone not recognized.
There must be something I can do? Thank you.
Click to expand...
Click to collapse
Use Flashtool again, and this time, before clicking , in the box that says "wipe", check 'userdata'.
Back up anything you want to save in internal storage.
levone1 said:
Use Flashtool again, and this time, before clicking , in the box that says "wipe", check 'userdata'.
Back up anything you want to save in internal storage.
Click to expand...
Click to collapse
Thank you so much. I've seen your name a lot around here, I appreciate you taking the time to help. I'm booting now and starting the root process
pleasuremann said:
Thank you so much. I've seen your name a lot around here, I appreciate you taking the time to help. I'm booting now and starting the root process
Click to expand...
Click to collapse
No problem - I'm messing around with a Samsung at the moment, but I still check in here from time to time. I think XC is my favorite phone so far... XZ2C was really nice too, but (unofficially) official Sailfish OS puts XC on top for me...
levone1 said:
No problem - I'm messing around with a Samsung at the moment, but I still check in here from time to time. I think XC is my favorite phone so far... XZ2C was really nice too, but (unofficially) official Sailfish OS puts XC on top for me...
Click to expand...
Click to collapse
Hi friend, please maybe you can help me. I have almost the same issue. But after using LineageOS for some days, my phone stuck in boot logo. I managed to use Flash Tool to flash latest original stock ROM (Customized IBE). Strangely the flash process ended OK, but the phone still stuck in boot logo. I'm only able to force shut down with Volumen Up+Power Off (3 vibrates). Not possible to enter Recovery Mode.
I'm 98% sure that I have flashed with check in wipe USERDATE and also in CUST-RESET. But I wanted to try again, and now Im not able to enter flashmode. Phone gets green light, when volume down, but Flashstool is not recognizing the phone.
Thanks in advance
jayeffpee said:
Hi friend, please maybe you can help me. I have almost the same issue. But after using LineageOS for some days, my phone stuck in boot logo. I managed to use Flash Tool to flash latest original stock ROM (Customized IBE). Strangely the flash process ended OK, but the phone still stuck in boot logo. I'm only able to force shut down with Volumen Up+Power Off (3 vibrates). Not possible to enter Recovery Mode.
I'm 98% sure that I have flashed with check in wipe USERDATE and also in CUST-RESET. But I wanted to try again, and now Im not able to enter flashmode. Phone gets green light, when volume down, but Flashstool is not recognizing the phone.
Thanks in advance
Click to expand...
Click to collapse
Does fastboot work? Also, what do you ultimately want to do, return to stock?
levone1 said:
Does fastboot work? Also, what do you ultimately want to do, return to stock?
Click to expand...
Click to collapse
yes, after hard work to install drivers, I managed to get the phone to be recognized by Flashtool in fastboot mode. But the phone is not charging when turned off, and its not rebooting. I wanted to try again with stock ROM, since I got some battery issues with LineageOS (phone turned off while playing some games, and worked fine while doing the same with usb cable charging to laptop or AC charger.)
But I cannot do anything right now. Only fastboot mode and force restart works, but it stuck in Sony logo (after normal bootloader unlock 5 seconds warning). What can I do?
Please help ASAP. I tried to install lineage os with MindGapps. After I flashed lineageos with twrp, I rebooted it and now it doesnt turn on. I tried to go to download mode, but doesnt.
The phone doesnt turn on. When I press and hold power button + volume down button for 7 seconds, samsung+knox logo appears and then 'phone bootloader unlocked' warning appears for few seconds.
An hour ago, somehow I managed to open its download mode. To test how it got opened, I restarted my device, but unfortunately, I couldnt go back to download mode. Is there any way to solve this problem? I want to go back to download mode
Hold the volume + and - buttons down at the same time and then plug in the usb cable into the phone.
sammiev said:
Hold the volume + and - buttons down at the same time and then plug in the usb cable into the phone.
Click to expand...
Click to collapse
Thanks solved
sarthak.whenever said:
Please help ASAP. I tried to install lineage os with MindGapps. After I flashed lineageos with twrp, I rebooted it and now it doesnt turn on. I tried to go to download mode, but doesnt.
The phone doesnt turn on. When I press and hold power button + volume down button for 7 seconds, samsung+knox logo appears and then 'phone bootloader unlocked' warning appears for few seconds.
An hour ago, somehow I managed to open its download mode. To test how it got opened, I restarted my device, but unfortunately, I couldnt go back to download mode. Is there any way to solve this problem? I want to go back to download mode
Click to expand...
Click to collapse
I have a question. did you install the twrp to one ui 3.1 ? pls answer me bc I wanna get out from the stock rom . I used gsi roms on my previous phone ( lg g3) and I was really enjoying while using gsi roms . now the one ui 3.1 has so many bugs or idk maybe they are only happening to me but I got really sick of that
haiise said:
I have a question. did you install the twrp to one ui 3.1 ? pls answer me bc I wanna get out from the stock rom . I used gsi roms on my previous phone ( lg g3) and I was really enjoying while using gsi roms . now the one ui 3.1 has so many bugs or idk maybe they are only happening to me but I got really sick of that
Click to expand...
Click to collapse
I first flashed twrp-black or something and it didn't work properly so I installed twrp-official downloaded from website. But then, after installing the official one, the recovery got corrupted. I couldn't boot into downloadmode, but luckily, it was just some key combination that was wrong, so, with a right key combination. I booted into download mode and reinstalled the initial firmware.
sarthak.whenever said:
I first flashed twrp-black or something and it didn't work properly so I installed twrp-official downloaded from website. But then, after installing the official one, the recovery got corrupted. I couldn't boot into downloadmode, but luckily, it was just some key combination that was wrong, so, with a right key combination. I booted into download mode and reinstalled the initial firmware.
Click to expand...
Click to collapse
Ohh glad to hear that you fixed your phone
Hello, I just finished to install LineageOS on my A20 and after reboot I saw the same message of Samsung Knox and the bootloader warning then a black screen and reboot automatically. Any sugestions?
sh_amuel said:
Hello, I just finished to install LineageOS on my A20 and after reboot I saw the same message of Samsung Knox and the bootloader warning then a black screen and reboot automatically. Any sugestions?
Click to expand...
Click to collapse
Yes, it just looks like it is bricked but it is not yet completely bricked.
The solution was simple.
First, completely power off device (don't restart, just turn off). After that, by certain keys combination, go to download mode.
It seems it doesn't work while restarting but works if it is completely turned off.(At least in my case it had been so)
sarthak.whenever said:
Yes, it just looks like it is bricked but it is not yet completely bricked.
The solution was simple.
First, completely power off device (don't restart, just turn off). After that, by certain keys combination, go to download mode.
It seems it doesn't work while restarting but works if it is completely turned off.(At least in my case it had been so)
Click to expand...
Click to collapse
I do know how to enter in download mode, but even when I upload the TWRP again and start over the process it get into the same black screen. I was wondering if Samsung Knox is blocking this action.
I have a one A20(SM-A205F).And I when installing the rom with odin in device, I unplugged the device cable on pc. Since that time device no reaction.PC, seen one second device's processor name. Can I bring the device back to life ?
MrMusti53 said:
I have a one A20(SM-A205F).And I when installing the rom with odin in device, I unplugged the device cable on pc. Since that time device no reaction.PC, seen one second device's processor name. Can I bring the device back to life ?
Click to expand...
Click to collapse
try to flash original software
haiise said:
try to flash original software
Click to expand...
Click to collapse
Any program can't see the device and the pc only saw it for a second
MrMusti53 said:
Any program can't see the device and the pc only saw it for a second
Click to expand...
Click to collapse
can you go to download mode ?
haiise said:
can you go to download mode ?
Click to expand...
Click to collapse
No, phone's no reaction
MrMusti53 said:
No, phone's no reaction
Click to expand...
Click to collapse
konudan bağımsız türk müsün la
Translated by GT: independent of the subject are you turkish
sarthak.whenever said:
Thanks solved
Click to expand...
Click to collapse
it didnt work for me , is there any other combo