can i install liquidsmooth rom 4.4 on my s4 gt-I9505 carier lock (globe) here in the philippines mine is rooted and have the latest clockwordmod recovery can i install this liquid smooth rom 4.4.2? to my device? my phone is running on cm 11 nightly. my phone was rooted and installed clockwordmod recovery via cm installer can i install liquidsmooth is it possible? thanks for the reply
If the ROM you mentioned has corresponding support to s4 , then yes, and it should be the same way you installed CM11
reply
qtwrk said:
If the ROM you mentioned has corresponding support to s4 , then yes, and it should be the same way you installed CM11
Click to expand...
Click to collapse
there is a support to s4 jftle for my s4 is ok even mine is carrier lock? because i use cm installer to root my phone and install recovery is it possible because i just want to try other roms
I am on a stock rom for SM-N900 . Want to upgrade to 4.4 custom ROM.
I've read that there's 2 version of the CWM recovery, one for JB and the other one for KK roms. Should I use the JB version to flash the 4.4 ROM and then odin flash the new 4.4 recovery ?
P_
pakalrtb said:
I am on a stock rom for SM-N900 . Want to upgrade to 4.4 custom ROM.
I've read that there's 2 version of the CWM recovery, one for JB and the other one for KK roms. Should I use the JB version to flash the 4.4 ROM and then odin flash the new 4.4 recovery ?
P_
Click to expand...
Click to collapse
If you're on JB and would like to upgrade to KK you must first flash KK with odin or OTA if available. Then flash cwm for KK to install custom KK rom.
Hi Guys, I am fairly new to flashing and rooting. Have successfully done on my Galaxy S5 and now trying on my Note 3 - N9005. I tried flashing a latest 4.4 rom - Echoe rom and it got stuck in Samsung Galaxy Note 3 Logo. Now i have flashed stock rom (Australian Vodafone) running 4.3. My question is since i am trying to flash a 4.4.2 rom, do i need to do anything specific or just flash TWRP and install a custom rom? i noticed there were 2 versions of TWRP one ofr 4.3 and one for 4.4. I am confused as to since i am on 4.3 version do I flash TWRP 4.3 version? or since i am looking to flash 4.4 rom should i install TWRP 4.4 at first place?
maximus81 said:
Hi Guys, I am fairly new to flashing and rooting. Have successfully done on my Galaxy S5 and now trying on my Note 3 - N9005. I tried flashing a latest 4.4 rom - Echoe rom and it got stuck in Samsung Galaxy Note 3 Logo. Now i have flashed stock rom (Australian Vodafone) running 4.3. My question is since i am trying to flash a 4.4.2 rom, do i need to do anything specific or just flash TWRP and install a custom rom? i noticed there were 2 versions of TWRP one ofr 4.3 and one for 4.4. I am confused as to since i am on 4.3 version do I flash TWRP 4.3 version? or since i am looking to flash 4.4 rom should i install TWRP 4.4 at first place?
Click to expand...
Click to collapse
you need 4.4 twrp. It should be 2.7.1 I think. you also need to me sure the Rom is compatible with your phone.
Swyped from the next galaxy...
danon.brown said:
you need 4.4 twrp. It should be 2.7.1 I think. you also need to me sure the Rom is compatible with your phone.
Swyped from the next galaxy...
Click to expand...
Click to collapse
During my first try, i had TWRP for 4.3, which allowed me to flash Echoe Rom based on 4.4 (latest version) for N9005, it even showed me success notification but it never booted past Samsung logo. I then flashed TWRP 4.4 version, but it then wouldn't boot in recovery. i reflashed TWRP 4.3 version and as last resort i had to flash stock firmware.
I will now flash TWRP 4.4 version at first instance and try flashing a rom again. maybe will try a different rom. Thanks for your suggestion :good:
This should be in Q and A don't be surprised if this thread gets closed ..
Sent from my proudly e-fused 0x1 N900P.
maximus81 said:
During my first try, i had TWRP for 4.3, which allowed me to flash Echoe Rom based on 4.4 (latest version) for N9005, it even showed me success notification but it never booted past Samsung logo. I then flashed TWRP 4.4 version, but it then wouldn't boot in recovery. i reflashed TWRP 4.3 version and as last resort i had to flash stock firmware.
I will now flash TWRP 4.4 version at first instance and try flashing a rom again. maybe will try a different rom. Thanks for your suggestion :good:
Click to expand...
Click to collapse
hello there.
u were sayin u r on 4.3 JB rom.
ur device is N9005 international 32gb right?
let me tell u 1 thing which is a good thing to remember.
4.4 rom will need a 4.4 bootloader.
since u r on 4.3, u must be on 4.3 bootloader which is incompatible with 4.4 rom. flashing twrp for kitkat won't help.
steps that u need to take (easiest) :
1. download 4.4.2 stock firmware.
2. flash with odin v3.09
3. root with cf autoroot (download the KK version)
3. flash custom recovery for KK version (twrp/cwm/ philz). I personally prefer cwm as it has give me less trouble for any custom rom.
4. u can flash any 4.4.2 custom rom now.
Sent from somewhere under the sky, at the corner of this rounded earth.
antique_sonic said:
hello there.
u were sayin u r on 4.3 JB rom.
ur device is N9005 international 32gb right?
let me tell u 1 thing which is a good thing to remember.
4.4 rom will need a 4.4 bootloader.
since u r on 4.3, u must be on 4.3 bootloader which is incompatible with 4.4 rom. flashing twrp for kitkat won't help.
steps that u need to take (easiest) :
1. download 4.4.2 stock firmware.
2. flash with odin v3.09
3. root with cf autoroot (download the KK version)
3. flash custom recovery for KK version (twrp/cwm/ philz). I personally prefer cwm as it has give me less trouble for any custom rom.
4. u can flash any 4.4.2 custom rom now.
Sent from somewhere under the sky, at the corner of this rounded earth.
Click to expand...
Click to collapse
THANK YOU!!! This makes lot of sense.:good: I will upgrade to KK first, then custom recovery and then rom. One question? 4.4 is not yet available for my carrier in Australia. can I download and install the Poland version that is floating around internet. Or would you recommend some other.
maximus81 said:
THANK YOU!!! This makes lot of sense.:good: I will upgrade to KK first, then custom recovery and then rom. One question? 4.4 is not yet available for my carrier in Australia. can I download and install the Poland version that is floating around internet. Or would you recommend some other.
Click to expand...
Click to collapse
check ur device model.
if it is n9005 international 32 gb then u can use any.
I prefer UK firmware (BTU).
do read first on how to upgrade from 4.3 to 4.4 before u do.
good luck.
Sent from somewhere under the sky, at the corner of this rounded earth.
Hello I just picked up my Note 3 and I had safestrap on my GS4
When I try to install jellybeans rom like I had on my GS4 it says its successful but when I reboot it says no OS is installed im on NC4
Anyone know the fix?
Thanks.
Did you flash the nc2 kernel in Odin ? Have to do that for custom rom to boot
hi,
i wanna root and install ozcanrom v5 on my galaxy s4 i9500
my android now:
android 4.3
i9500jkuemj9
3.4.5-1984169
bulid:
jss15j.i9500xxuemj9
thanks!
idan+ said:
hi,
i wanna root and install ozcanrom v5 on my galaxy s4 i9500
my android now:
android 4.3
i9500jkuemj9
3.4.5-1984169
bulid:
jss15j.i9500xxuemj9
thanks!
Click to expand...
Click to collapse
First update from 4.3 to 4.4.2.
Then Flash Philz, Deknox your phone, Reroot Via Philz.
After doing this, download the rom you want to use.
Check the firmware of the ROM and the firmware you installed, they should match. (Like if the rom is based on XXUGNG8, Then you should also flash official XXUGNG8)
Place the downloaded Rom in your EXTSD card and boot into recovery.
After that data wipe your phone.
Flash the zip from ext sd via Philz and install the rom.
Data wipe again.
And there you go
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.