Database Users

[Q] can i flash liquidsmooth rom on my s4

can i install liquidsmooth rom 4.4 on my s4 gt-I9505 carier lock (globe) here in the philippines mine is rooted and have the latest clockwordmod recovery can i install this liquid smooth rom 4.4.2? to my device? my phone is running on cm 11 nightly. my phone was rooted and installed clockwordmod recovery via cm installer can i install liquidsmooth is it possible? thanks for the reply

If the ROM you mentioned has corresponding support to s4 , then yes, and it should be the same way you installed CM11

reply
qtwrk said:
If the ROM you mentioned has corresponding support to s4 , then yes, and it should be the same way you installed CM11
Click to expand...
Click to collapse
there is a support to s4 jftle for my s4 is ok even mine is carrier lock? because i use cm installer to root my phone and install recovery is it possible because i just want to try other roms

[Q] Currently stuck and don't know how to fix rom

I have a rooted galaxy note 3 sm-900w8 running jelly bean. I upgraded it to the xnote 9005 rom and it worked flawlessly and today i upgraded it to the bobcat rom so that i can get 4.4 kit kat. I did it by just flashing the rom. I couldn't get past their boot icon. Then I tried to reinstall xnote and TWRP says it fails to open the xnote zip. Is there anything that I can do? Help would be very appreciated because its my daily driver.

czozuk said:
I have a rooted galaxy note 3 sm-900w8 running jelly bean. I upgraded it to the xnote 9005 rom and it worked flawlessly and today i upgraded it to the bobcat rom so that i can get 4.4 kit kat. I did it by just flashing the rom. I couldn't get past their boot icon. Then I tried to reinstall xnote and TWRP says it fails to open the xnote zip. Is there anything that I can do? Help would be very appreciated because its my daily driver.
Click to expand...
Click to collapse
If you was using x-note jellybean version and trying to upgrade to kitkat by just flashed bobcatrom then it's not right. You need to flash stock kitkat rom with odin then flash custom kitkat rom of your choice with custom recovery. And maybe the xnote zip has corrupted. Try redownload and reflash. Or try cwm to see if you could flash the xnote

[Q] To root again after official update or not?

Hi
I have an I9505 which was at 4.3 by default. I used the CF-Auto-Root-jflte-jfltexx-gti9505.tar to root it and after that i updated it with odin and I9505XXUFNB8_I9505TSIFNB1_I9505XXUFNB8_HOME.tar that i got from sammobile.com .
now I don't know that after updating official rom, i'm rooted or not?!!
I flashed Trwap recovery again. I don't know that can i flash a custome rom now with it or i have to root again? if YES, the CF-Auto-Root-jflte-jfltexx-gti9505.tar will work again with android 4.4.2 or not?
thanks
please guide me.

mahdi87_gh said:
Hi
I have an I9505 which was at 4.3 by default. I used the CF-Auto-Root-jflte-jfltexx-gti9505.tar to root it and after that i updated it with odin and I9505XXUFNB8_I9505TSIFNB1_I9505XXUFNB8_HOME.tar that i got from sammobile.com .
now I don't know that after updating official rom, i'm rooted or not?!!
I flashed Trwap recovery again. I don't know that can i flash a custome rom now with it or i have to root again? if YES, the CF-Auto-Root-jflte-jfltexx-gti9505.tar will work again with android 4.4.2 or not?
thanks
please guide me.
Click to expand...
Click to collapse
There is an app called Root Checker which does what the name says. Usuallly, you can preserve root while upgrading if you got SuperSU Pro and have "Survival Mode" enabled.

You don't need to root for flashing a custom rom. You can just flash from the recovery.

Thanks
I flashed a new rom

Help Please re: flashing 4.4.2 on note 3

Hi Guys, I am fairly new to flashing and rooting. Have successfully done on my Galaxy S5 and now trying on my Note 3 - N9005. I tried flashing a latest 4.4 rom - Echoe rom and it got stuck in Samsung Galaxy Note 3 Logo. Now i have flashed stock rom (Australian Vodafone) running 4.3. My question is since i am trying to flash a 4.4.2 rom, do i need to do anything specific or just flash TWRP and install a custom rom? i noticed there were 2 versions of TWRP one ofr 4.3 and one for 4.4. I am confused as to since i am on 4.3 version do I flash TWRP 4.3 version? or since i am looking to flash 4.4 rom should i install TWRP 4.4 at first place?

maximus81 said:
Hi Guys, I am fairly new to flashing and rooting. Have successfully done on my Galaxy S5 and now trying on my Note 3 - N9005. I tried flashing a latest 4.4 rom - Echoe rom and it got stuck in Samsung Galaxy Note 3 Logo. Now i have flashed stock rom (Australian Vodafone) running 4.3. My question is since i am trying to flash a 4.4.2 rom, do i need to do anything specific or just flash TWRP and install a custom rom? i noticed there were 2 versions of TWRP one ofr 4.3 and one for 4.4. I am confused as to since i am on 4.3 version do I flash TWRP 4.3 version? or since i am looking to flash 4.4 rom should i install TWRP 4.4 at first place?
Click to expand...
Click to collapse
you need 4.4 twrp. It should be 2.7.1 I think. you also need to me sure the Rom is compatible with your phone.
Swyped from the next galaxy...

danon.brown said:
you need 4.4 twrp. It should be 2.7.1 I think. you also need to me sure the Rom is compatible with your phone.
Swyped from the next galaxy...
Click to expand...
Click to collapse
During my first try, i had TWRP for 4.3, which allowed me to flash Echoe Rom based on 4.4 (latest version) for N9005, it even showed me success notification but it never booted past Samsung logo. I then flashed TWRP 4.4 version, but it then wouldn't boot in recovery. i reflashed TWRP 4.3 version and as last resort i had to flash stock firmware.
I will now flash TWRP 4.4 version at first instance and try flashing a rom again. maybe will try a different rom. Thanks for your suggestion :good:

This should be in Q and A don't be surprised if this thread gets closed ..
Sent from my proudly e-fused 0x1 N900P.

maximus81 said:
During my first try, i had TWRP for 4.3, which allowed me to flash Echoe Rom based on 4.4 (latest version) for N9005, it even showed me success notification but it never booted past Samsung logo. I then flashed TWRP 4.4 version, but it then wouldn't boot in recovery. i reflashed TWRP 4.3 version and as last resort i had to flash stock firmware.
I will now flash TWRP 4.4 version at first instance and try flashing a rom again. maybe will try a different rom. Thanks for your suggestion :good:
Click to expand...
Click to collapse
hello there.
u were sayin u r on 4.3 JB rom.
ur device is N9005 international 32gb right?
let me tell u 1 thing which is a good thing to remember.
4.4 rom will need a 4.4 bootloader.
since u r on 4.3, u must be on 4.3 bootloader which is incompatible with 4.4 rom. flashing twrp for kitkat won't help.
steps that u need to take (easiest) :
1. download 4.4.2 stock firmware.
2. flash with odin v3.09
3. root with cf autoroot (download the KK version)
3. flash custom recovery for KK version (twrp/cwm/ philz). I personally prefer cwm as it has give me less trouble for any custom rom.
4. u can flash any 4.4.2 custom rom now.
Sent from somewhere under the sky, at the corner of this rounded earth.

antique_sonic said:
hello there.
u were sayin u r on 4.3 JB rom.
ur device is N9005 international 32gb right?
let me tell u 1 thing which is a good thing to remember.
4.4 rom will need a 4.4 bootloader.
since u r on 4.3, u must be on 4.3 bootloader which is incompatible with 4.4 rom. flashing twrp for kitkat won't help.
steps that u need to take (easiest) :
1. download 4.4.2 stock firmware.
2. flash with odin v3.09
3. root with cf autoroot (download the KK version)
3. flash custom recovery for KK version (twrp/cwm/ philz). I personally prefer cwm as it has give me less trouble for any custom rom.
4. u can flash any 4.4.2 custom rom now.
Sent from somewhere under the sky, at the corner of this rounded earth.
Click to expand...
Click to collapse
THANK YOU!!! This makes lot of sense.:good: I will upgrade to KK first, then custom recovery and then rom. One question? 4.4 is not yet available for my carrier in Australia. can I download and install the Poland version that is floating around internet. Or would you recommend some other.

maximus81 said:
THANK YOU!!! This makes lot of sense.:good: I will upgrade to KK first, then custom recovery and then rom. One question? 4.4 is not yet available for my carrier in Australia. can I download and install the Poland version that is floating around internet. Or would you recommend some other.
Click to expand...
Click to collapse
check ur device model.
if it is n9005 international 32 gb then u can use any.
I prefer UK firmware (BTU).
do read first on how to upgrade from 4.3 to 4.4 before u do.
good luck.
Sent from somewhere under the sky, at the corner of this rounded earth.

[Q] Unable to install custom recovery on Note 3

Hi guys,
Not sure of this wss covered already but i was unable to locate anything that helps
I currently have a Galaxy Note 3 n9005 international LTE version with stock kitkat installed 4.4.2. The phone is rooted which i did upon receiving it and have super user 2.0 installed. i have confirmed root with titanium back.
Now i wanted to try a custom rom and tried to install the new phillz touch recovery but observed that it kept failing in odin (tried several times) i even tried to install a custom recovery via ROM Manager which it said the update was complete but when ever i boot into recovery mode i keep get the stock android recovery.
i have search and cannot find anything that help so here i am.
My Android version N9005XXUENC2 AND Kernel version is 3.4.0-636608 dpi @SWDD5619 #1
From my understanding once u root it should have install a custom recovery. When i got the phone it came with Jelly bean 4.3 and i rooted then updated to kitkat, could this be the issue. Does that mean i have root again?
Any assistance given is greatly appreciated.

I have the same Problem rooted with towelroot work fine with knox 0x0 and i have testet it with Rom Manager and with Rom installer have installed twrp and cwm all Not work sorry 4 the Bad english.
Sent from my SM-N9005 using XDA Premium 4 mobile app

FarDablinG said:
Hi guys,
Not sure of this wss covered already but i was unable to locate anything that helps
I currently have a Galaxy Note 3 n9005 international LTE version with stock kitkat installed 4.4.2. The phone is rooted which i did upon receiving it and have super user 2.0 installed. i have confirmed root with titanium back.
Now i wanted to try a custom rom and tried to install the new phillz touch recovery but observed that it kept failing in odin (tried several times) i even tried to install a custom recovery via ROM Manager which it said the update was complete but when ever i boot into recovery mode i keep get the stock android recovery.
i have search and cannot find anything that help so here i am.
My Android version N9005XXUENC2 AND Kernel version is 3.4.0-636608 dpi @SWDD5619 #1
From my understanding once u root it should have install a custom recovery. When i got the phone it came with Jelly bean 4.3 and i rooted then updated to kitkat, could this be the issue. Does that mean i have root again?
Any assistance given is greatly appreciated.
Click to expand...
Click to collapse
If you have updated via Kies, i think you lost the root access. Download a root checker app and check the root status.