can i install liquidsmooth rom 4.4 on my s4 gt-I9505 carier lock (globe) here in the philippines mine is rooted and have the latest clockwordmod recovery can i install this liquid smooth rom 4.4.2? to my device? my phone is running on cm 11 nightly. my phone was rooted and installed clockwordmod recovery via cm installer can i install liquidsmooth is it possible? thanks for the reply
If the ROM you mentioned has corresponding support to s4 , then yes, and it should be the same way you installed CM11
reply
qtwrk said:
If the ROM you mentioned has corresponding support to s4 , then yes, and it should be the same way you installed CM11
Click to expand...
Click to collapse
there is a support to s4 jftle for my s4 is ok even mine is carrier lock? because i use cm installer to root my phone and install recovery is it possible because i just want to try other roms
Related
Hello,
New user to a Nexus 4. I have unlocked and rooted the phone, have cwm installed for my custom recovery. I am currently running MIUIv5 however I am thinking of switching to a much lighter/less bloated rom such as the latest CM.
I bought the phone factory set, I am 99% sure it had 4.3 installed but I can't be 100% sure as I had rooted the phone the rom bug hit me!!
So, to flash a 4.3 rom such as CM10.2 do I need a baseband upgrade?
Currently on: M9615A-CEFWMAZM-2.0.1700.84
Thanks,
Looks like you are already on the latest baseband so there is no need to flash one.
Thank you
I have a rooted galaxy note 3 sm-900w8 running jelly bean. I upgraded it to the xnote 9005 rom and it worked flawlessly and today i upgraded it to the bobcat rom so that i can get 4.4 kit kat. I did it by just flashing the rom. I couldn't get past their boot icon. Then I tried to reinstall xnote and TWRP says it fails to open the xnote zip. Is there anything that I can do? Help would be very appreciated because its my daily driver.
czozuk said:
I have a rooted galaxy note 3 sm-900w8 running jelly bean. I upgraded it to the xnote 9005 rom and it worked flawlessly and today i upgraded it to the bobcat rom so that i can get 4.4 kit kat. I did it by just flashing the rom. I couldn't get past their boot icon. Then I tried to reinstall xnote and TWRP says it fails to open the xnote zip. Is there anything that I can do? Help would be very appreciated because its my daily driver.
Click to expand...
Click to collapse
If you was using x-note jellybean version and trying to upgrade to kitkat by just flashed bobcatrom then it's not right. You need to flash stock kitkat rom with odin then flash custom kitkat rom of your choice with custom recovery. And maybe the xnote zip has corrupted. Try redownload and reflash. Or try cwm to see if you could flash the xnote
Hi Guys, I am fairly new to flashing and rooting. Have successfully done on my Galaxy S5 and now trying on my Note 3 - N9005. I tried flashing a latest 4.4 rom - Echoe rom and it got stuck in Samsung Galaxy Note 3 Logo. Now i have flashed stock rom (Australian Vodafone) running 4.3. My question is since i am trying to flash a 4.4.2 rom, do i need to do anything specific or just flash TWRP and install a custom rom? i noticed there were 2 versions of TWRP one ofr 4.3 and one for 4.4. I am confused as to since i am on 4.3 version do I flash TWRP 4.3 version? or since i am looking to flash 4.4 rom should i install TWRP 4.4 at first place?
maximus81 said:
Hi Guys, I am fairly new to flashing and rooting. Have successfully done on my Galaxy S5 and now trying on my Note 3 - N9005. I tried flashing a latest 4.4 rom - Echoe rom and it got stuck in Samsung Galaxy Note 3 Logo. Now i have flashed stock rom (Australian Vodafone) running 4.3. My question is since i am trying to flash a 4.4.2 rom, do i need to do anything specific or just flash TWRP and install a custom rom? i noticed there were 2 versions of TWRP one ofr 4.3 and one for 4.4. I am confused as to since i am on 4.3 version do I flash TWRP 4.3 version? or since i am looking to flash 4.4 rom should i install TWRP 4.4 at first place?
Click to expand...
Click to collapse
you need 4.4 twrp. It should be 2.7.1 I think. you also need to me sure the Rom is compatible with your phone.
Swyped from the next galaxy...
danon.brown said:
you need 4.4 twrp. It should be 2.7.1 I think. you also need to me sure the Rom is compatible with your phone.
Swyped from the next galaxy...
Click to expand...
Click to collapse
During my first try, i had TWRP for 4.3, which allowed me to flash Echoe Rom based on 4.4 (latest version) for N9005, it even showed me success notification but it never booted past Samsung logo. I then flashed TWRP 4.4 version, but it then wouldn't boot in recovery. i reflashed TWRP 4.3 version and as last resort i had to flash stock firmware.
I will now flash TWRP 4.4 version at first instance and try flashing a rom again. maybe will try a different rom. Thanks for your suggestion :good:
This should be in Q and A don't be surprised if this thread gets closed ..
Sent from my proudly e-fused 0x1 N900P.
maximus81 said:
During my first try, i had TWRP for 4.3, which allowed me to flash Echoe Rom based on 4.4 (latest version) for N9005, it even showed me success notification but it never booted past Samsung logo. I then flashed TWRP 4.4 version, but it then wouldn't boot in recovery. i reflashed TWRP 4.3 version and as last resort i had to flash stock firmware.
I will now flash TWRP 4.4 version at first instance and try flashing a rom again. maybe will try a different rom. Thanks for your suggestion :good:
Click to expand...
Click to collapse
hello there.
u were sayin u r on 4.3 JB rom.
ur device is N9005 international 32gb right?
let me tell u 1 thing which is a good thing to remember.
4.4 rom will need a 4.4 bootloader.
since u r on 4.3, u must be on 4.3 bootloader which is incompatible with 4.4 rom. flashing twrp for kitkat won't help.
steps that u need to take (easiest) :
1. download 4.4.2 stock firmware.
2. flash with odin v3.09
3. root with cf autoroot (download the KK version)
3. flash custom recovery for KK version (twrp/cwm/ philz). I personally prefer cwm as it has give me less trouble for any custom rom.
4. u can flash any 4.4.2 custom rom now.
Sent from somewhere under the sky, at the corner of this rounded earth.
antique_sonic said:
hello there.
u were sayin u r on 4.3 JB rom.
ur device is N9005 international 32gb right?
let me tell u 1 thing which is a good thing to remember.
4.4 rom will need a 4.4 bootloader.
since u r on 4.3, u must be on 4.3 bootloader which is incompatible with 4.4 rom. flashing twrp for kitkat won't help.
steps that u need to take (easiest) :
1. download 4.4.2 stock firmware.
2. flash with odin v3.09
3. root with cf autoroot (download the KK version)
3. flash custom recovery for KK version (twrp/cwm/ philz). I personally prefer cwm as it has give me less trouble for any custom rom.
4. u can flash any 4.4.2 custom rom now.
Sent from somewhere under the sky, at the corner of this rounded earth.
Click to expand...
Click to collapse
THANK YOU!!! This makes lot of sense.:good: I will upgrade to KK first, then custom recovery and then rom. One question? 4.4 is not yet available for my carrier in Australia. can I download and install the Poland version that is floating around internet. Or would you recommend some other.
maximus81 said:
THANK YOU!!! This makes lot of sense.:good: I will upgrade to KK first, then custom recovery and then rom. One question? 4.4 is not yet available for my carrier in Australia. can I download and install the Poland version that is floating around internet. Or would you recommend some other.
Click to expand...
Click to collapse
check ur device model.
if it is n9005 international 32 gb then u can use any.
I prefer UK firmware (BTU).
do read first on how to upgrade from 4.3 to 4.4 before u do.
good luck.
Sent from somewhere under the sky, at the corner of this rounded earth.
hi,
i wanna root and install ozcanrom v5 on my galaxy s4 i9500
my android now:
android 4.3
i9500jkuemj9
3.4.5-1984169
bulid:
jss15j.i9500xxuemj9
thanks!
idan+ said:
hi,
i wanna root and install ozcanrom v5 on my galaxy s4 i9500
my android now:
android 4.3
i9500jkuemj9
3.4.5-1984169
bulid:
jss15j.i9500xxuemj9
thanks!
Click to expand...
Click to collapse
First update from 4.3 to 4.4.2.
Then Flash Philz, Deknox your phone, Reroot Via Philz.
After doing this, download the rom you want to use.
Check the firmware of the ROM and the firmware you installed, they should match. (Like if the rom is based on XXUGNG8, Then you should also flash official XXUGNG8)
Place the downloaded Rom in your EXTSD card and boot into recovery.
After that data wipe your phone.
Flash the zip from ext sd via Philz and install the rom.
Data wipe again.
And there you go
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
Hello everyone,
Sorry if i'm opening this thread to wrong place.
I did a few search in this forum but i couldn't find anything for Lineage OS rom for SGH-I337M (Rogers)
Is Lineage OS (Formerly known as CyanogenMod) even supported on SGH-I337M model? Cannot find any build for "jfltecan". I just don't want to flash wrong rom and end up bricking the phone. Also can I flash "jflteatt" or "jfltexx" Lineage OS rom to my "jfltecan"? Beside Lineage OS ROM, is there any good rom based on Android 7.1.1/7.1.2 that can be used with this phone?
Here are the information's of my phone:
Samsung S4 Rogers
Moel: SGH-I337M
Android 5.0.1
Basband: I337MVLUGOH1
Any help would be appreciated.
You can flash twrp for the i9505 and then flash roms for the jfltexx.
audit13 said:
You can flash twrp for the i9505 and then flash roms for the jfltexx.
Click to expand...
Click to collapse
Bro, are you sure that i can flash the i9505 into i337M? See the following post:
https://forum.xda-developers.com/showthread.php?t=2264885
I've done it on my i337m. It was a while ago but it worked. The thread you linked appears to be talking about a stock 9505 ROM on a i337m.
You can use twrp for i337m and edit the updater script in the 9505 ROM to include the jfltecan.
audit13 said:
I've done it on my i337m. It was a while ago but it worked. The thread you linked appears to be talking about a stock 9505 ROM on a i337m.
You can use twrp for i337m and edit the updater script in the 9505 ROM to include the jfltecan.
Click to expand...
Click to collapse
Can i flash the following LineageOS 7.1.2?
https://forum.xda-developers.com/ga...p/jdcteam-optimized-cyanogenmod-14-0-t3479888
PHP:
I have downloaded the "Optimized-LineageOS-14.1-20170507-Stable3.zip" and verified that the jfltecan already exist in the Optimized-LineageOS-14.1-20170507-Stable3\META-INF\com\google\android\updater-script so i guess i don't have to modify anything. Can you please confirm.
No need to change anything since the Canadian s4 is included in the updater script.
Using jfltexx TWRP on SGH-I337M
Dear ixdadev,
I have the same Samsung device from FIDO in Canada.
I have flashed the jfltexx version of the TWRP recovery on my SGH-I337M device without a single problem.
Then I flashed the Lineage OS 14.1 (jfltexx version) onto the device without single problem.
I have also tried on the jfltecan version of TWRP on the same device but it then rejected to install the Lineage OS 14.1 (jfltexx version) or Resurrection Remix (jfltexx version). I believe the Recovery needs to match with the OS that you are going to install onto it.
Hope this help and sooth your concerns.
Regards,
Alan
ixdadev said:
Hello everyone,
Sorry if i'm opening this thread to wrong place.
I did a few search in this forum but i couldn't find anything for Lineage OS rom for SGH-I337M (Rogers)
Is Lineage OS (Formerly known as CyanogenMod) even supported on SGH-I337M model? Cannot find any build for "jfltecan". I just don't want to flash wrong rom and end up bricking the phone. Also can I flash "jflteatt" or "jfltexx" Lineage OS rom to my "jfltecan"? Beside Lineage OS ROM, is there any good rom based on Android 7.1.1/7.1.2 that can be used with this phone?
Here are the information's of my phone:
Samsung S4 Rogers
Moel: SGH-I337M
Android 5.0.1
Basband: I337MVLUGOH1
Any help would be appreciated.
Click to expand...
Click to collapse