Troubles with safestrap - Verizon Galaxy Note 3 Q&A, Help & Troubleshooting

Hello I just picked up my Note 3 and I had safestrap on my GS4
When I try to install jellybeans rom like I had on my GS4 it says its successful but when I reboot it says no OS is installed im on NC4
Anyone know the fix?
Thanks.

Did you flash the nc2 kernel in Odin ? Have to do that for custom rom to boot

Related

[Q] Currently stuck and don't know how to fix rom

I have a rooted galaxy note 3 sm-900w8 running jelly bean. I upgraded it to the xnote 9005 rom and it worked flawlessly and today i upgraded it to the bobcat rom so that i can get 4.4 kit kat. I did it by just flashing the rom. I couldn't get past their boot icon. Then I tried to reinstall xnote and TWRP says it fails to open the xnote zip. Is there anything that I can do? Help would be very appreciated because its my daily driver.
czozuk said:
I have a rooted galaxy note 3 sm-900w8 running jelly bean. I upgraded it to the xnote 9005 rom and it worked flawlessly and today i upgraded it to the bobcat rom so that i can get 4.4 kit kat. I did it by just flashing the rom. I couldn't get past their boot icon. Then I tried to reinstall xnote and TWRP says it fails to open the xnote zip. Is there anything that I can do? Help would be very appreciated because its my daily driver.
Click to expand...
Click to collapse
If you was using x-note jellybean version and trying to upgrade to kitkat by just flashed bobcatrom then it's not right. You need to flash stock kitkat rom with odin then flash custom kitkat rom of your choice with custom recovery. And maybe the xnote zip has corrupted. Try redownload and reflash. Or try cwm to see if you could flash the xnote

Help Please re: flashing 4.4.2 on note 3

Hi Guys, I am fairly new to flashing and rooting. Have successfully done on my Galaxy S5 and now trying on my Note 3 - N9005. I tried flashing a latest 4.4 rom - Echoe rom and it got stuck in Samsung Galaxy Note 3 Logo. Now i have flashed stock rom (Australian Vodafone) running 4.3. My question is since i am trying to flash a 4.4.2 rom, do i need to do anything specific or just flash TWRP and install a custom rom? i noticed there were 2 versions of TWRP one ofr 4.3 and one for 4.4. I am confused as to since i am on 4.3 version do I flash TWRP 4.3 version? or since i am looking to flash 4.4 rom should i install TWRP 4.4 at first place?
maximus81 said:
Hi Guys, I am fairly new to flashing and rooting. Have successfully done on my Galaxy S5 and now trying on my Note 3 - N9005. I tried flashing a latest 4.4 rom - Echoe rom and it got stuck in Samsung Galaxy Note 3 Logo. Now i have flashed stock rom (Australian Vodafone) running 4.3. My question is since i am trying to flash a 4.4.2 rom, do i need to do anything specific or just flash TWRP and install a custom rom? i noticed there were 2 versions of TWRP one ofr 4.3 and one for 4.4. I am confused as to since i am on 4.3 version do I flash TWRP 4.3 version? or since i am looking to flash 4.4 rom should i install TWRP 4.4 at first place?
Click to expand...
Click to collapse
you need 4.4 twrp. It should be 2.7.1 I think. you also need to me sure the Rom is compatible with your phone.
Swyped from the next galaxy...
danon.brown said:
you need 4.4 twrp. It should be 2.7.1 I think. you also need to me sure the Rom is compatible with your phone.
Swyped from the next galaxy...
Click to expand...
Click to collapse
During my first try, i had TWRP for 4.3, which allowed me to flash Echoe Rom based on 4.4 (latest version) for N9005, it even showed me success notification but it never booted past Samsung logo. I then flashed TWRP 4.4 version, but it then wouldn't boot in recovery. i reflashed TWRP 4.3 version and as last resort i had to flash stock firmware.
I will now flash TWRP 4.4 version at first instance and try flashing a rom again. maybe will try a different rom. Thanks for your suggestion :good:
This should be in Q and A don't be surprised if this thread gets closed ..
Sent from my proudly e-fused 0x1 N900P.
maximus81 said:
During my first try, i had TWRP for 4.3, which allowed me to flash Echoe Rom based on 4.4 (latest version) for N9005, it even showed me success notification but it never booted past Samsung logo. I then flashed TWRP 4.4 version, but it then wouldn't boot in recovery. i reflashed TWRP 4.3 version and as last resort i had to flash stock firmware.
I will now flash TWRP 4.4 version at first instance and try flashing a rom again. maybe will try a different rom. Thanks for your suggestion :good:
Click to expand...
Click to collapse
hello there.
u were sayin u r on 4.3 JB rom.
ur device is N9005 international 32gb right?
let me tell u 1 thing which is a good thing to remember.
4.4 rom will need a 4.4 bootloader.
since u r on 4.3, u must be on 4.3 bootloader which is incompatible with 4.4 rom. flashing twrp for kitkat won't help.
steps that u need to take (easiest) :
1. download 4.4.2 stock firmware.
2. flash with odin v3.09
3. root with cf autoroot (download the KK version)
3. flash custom recovery for KK version (twrp/cwm/ philz). I personally prefer cwm as it has give me less trouble for any custom rom.
4. u can flash any 4.4.2 custom rom now.
Sent from somewhere under the sky, at the corner of this rounded earth.
antique_sonic said:
hello there.
u were sayin u r on 4.3 JB rom.
ur device is N9005 international 32gb right?
let me tell u 1 thing which is a good thing to remember.
4.4 rom will need a 4.4 bootloader.
since u r on 4.3, u must be on 4.3 bootloader which is incompatible with 4.4 rom. flashing twrp for kitkat won't help.
steps that u need to take (easiest) :
1. download 4.4.2 stock firmware.
2. flash with odin v3.09
3. root with cf autoroot (download the KK version)
3. flash custom recovery for KK version (twrp/cwm/ philz). I personally prefer cwm as it has give me less trouble for any custom rom.
4. u can flash any 4.4.2 custom rom now.
Sent from somewhere under the sky, at the corner of this rounded earth.
Click to expand...
Click to collapse
THANK YOU!!! This makes lot of sense.:good: I will upgrade to KK first, then custom recovery and then rom. One question? 4.4 is not yet available for my carrier in Australia. can I download and install the Poland version that is floating around internet. Or would you recommend some other.
maximus81 said:
THANK YOU!!! This makes lot of sense.:good: I will upgrade to KK first, then custom recovery and then rom. One question? 4.4 is not yet available for my carrier in Australia. can I download and install the Poland version that is floating around internet. Or would you recommend some other.
Click to expand...
Click to collapse
check ur device model.
if it is n9005 international 32 gb then u can use any.
I prefer UK firmware (BTU).
do read first on how to upgrade from 4.3 to 4.4 before u do.
good luck.
Sent from somewhere under the sky, at the corner of this rounded earth.

[Q] Need help on AT&T Compatible Kernel

Hi,
I have samsung galaxy AT&T S4 I337, MDL baseband version.
I rooted the phone long back with Motochopper.
Last week, I installed TWRP 2.7.1.0 with "Rom Installer" app and I came to know that it is loki-fied TWRP.
I tried to flash couple of ROMs, but none of them worked except CM11. I tried foxhound ROM, Wanamlite ROM and Wicked ROM. On flashing any of these, I am getting a message "System software not authorized by AT&T is found on your phone", irrespective of whether I flash loki-doki.zip or not.
CM11 flashed fine (with out even flashing loki) and I am currently using it. My S4's firmware doesn't support call recording and I need it.
I searched the forums about the error message and I came to know that I need to flash an AT&T compatible kernel after flashing the ROM. Where can I find the AT&T compatible kernel? Can I flash the same kernel when I try different ROMs?
I installed xposed installer in CM11 and I have activated the module "EnableCMCallRecording". Does this really work?
FYI, I am able to get into TWRP recovery with out any issues when I am stuck in bootloop.
I have some knowledge about ODIN as I have used it in the past.
Thanks,
Balaji.

[Q] question concerning install of optimal rom

I am running a rooted stock verizon galaxy s5 4.4.4 with safestrap installed. I just need to know whether I need to flash capable firmware before or after installing custom optimal rom with safestrap
[email protected] said:
I am running a rooted stock verizon galaxy s5 4.4.4 with safestrap installed. I just need to know whether I need to flash capable firmware before or after installing custom optimal rom with safestrap
Click to expand...
Click to collapse
You could ask the question in the Optimal ROM thread...
Either or. It doesn't matter unless Safestrap requires a different version. Just make sure to NOT boot into the OS if you flash the firmware later unless you already flashed it before you boot.

Install Custom Recovery Samsung Galaxy AT&T S4 SGH-I337 Ver 5.0.1 Non-Rooted. OK2

Install Custom Recovery Samsung Galaxy AT&T S4 SGH-I337 Ver 5.0.1 Non-Rooted. OK2
Hello, I Want to do some modifications to my Samsung Galaxy S4 and Have so many questions that I am not sure were to start? Yes I'm a noob but learning. I have a SGH-I337 phone that is unlocked so I use it for T-mobile. The phone came with KitKat 4.4.2 NB1 firmware but I managed to update it manually to the latest firmware OK2.
What I would like to do is install a custom recovery and install a clean non bloated Rom. Maybe a custom such as CyanogenMod? Questions: Is there any recovery software that will work on my present upgraded phone such as Safestrap, TWARP,PhilZ or CWM and in doing so I am guessing I need to root my phone first? When you root a phone does that unlock the boot loader? I have read articles saying you can only install custom recovery on the older firmware such as kitkat 4.4.2. or unless a update comes out. I also have read articles that I cannot downgrade and am not sure what that means as I have read articles that I can use Odin and reinstall my stock firmware NB1 is that true? Is there a way to downgrade your upgrades?
I see a lot of articles how to install recovery software but they do not always say what firmware version they are installing it to so I wont even try it. I am guessing-it is the older firmware 4.4.2.
I have read I can flash my kernel to an older Kernel such as NB1 then root it install a custom recovery then upgrade the kernel again? Not sure it I can upgrade or downgrade kernels that are for my phone?
I did manage to root my phone awhile back when it had kitkat 4.4.2 NB1 but had problems later on with my touch screen going crazy as if someone was in my phone so I brought it back to stock by using Odin and reinstalling NB1 firmware hoping to fix the problem. After installing stock firmware I decided to upgrade to lollipop 5.0.1 OB2 and that is were I am now. About my touch screen going crazy I have been reading it may be due to cheap USB chargers which I am using but that is another story.
Well any-help or leads would be appreciated.
Maybe if I wait long enough someone will come up with a custom ROM for my latest firmware as well as rooting it?
Steve

Categories

Resources