format failed
g4
IPL 2.17.0001
SPL 1.01
i always use windows mobile 5, it happened when i want upgrade rom. only one rom (rom update utility 2.00.3) works when upgrade, but after restart pda the problem return.
qtek 9100
Related
Hello There,
I've spend my free Sunday on flashing my ROM :roll:
I wanted to warn about a "bug" in the t-mobile 4.01.16 ROM with o2 radio 4.21. Here’s what happened:
I've upgraded from AT&T a.30.09 ROM with o2 Radio 4.08 to t-mobile 4.01.16 ROM with o2 radio 4.21.
- 1st I've installed the t-mobile ROM (SD Flash method Note: ALWAYS DO
THIS!)
- 2nd I've turned off my phone and installed o2 radio 4.21 (through
programB)
Problem:
Every thing went well and there were no errors at all! But:
When I tried to start my phone again there was NO SERVICE possible?!
- I've tried to reset my GSM Module by going to the Wallaby bootloader
V 5.14 and pressed the Calendar hardware button. This wouldn’t work.
- I've Flashed the ROM back to the original ppc 2002 ROM (Not the Radio
stack) to get my phone software back (what was lost or unable to start?!)
- Still the phone says no service possible!
- I've Downloaded the T-Mobile Radio stack 6.24.00 and installed it (by
Copying the RSUpdate.exe and files in the windows directory and run it
from the device windows directory).
- After doing this I had a white screen Hang . Luckily after a soft reset it
got back to the radiostack upgrade screen :lol:.
- But Still No Luck so far.
- I've reset my GSM Module again by going to the Wallaby
Bootloader V 5.14 and pressed the Calendar hardware button.
- Turned my device back on and got a simlock warning in W2003!?
- Had to Flash my ROM back again to o2 3.17.03 ROM PPC2002 to be able
to release my SIMlock again With XDAunlock. (worked :wink
- Still no Service !
- I've Installed the new o2 radio stack 4.21 back and
I had Service again!? :lol: :wink:.
- Upgraded the ROM again with T-Mobiles new 4.01.16 ROM.
- Finally it's Upgraded and smooth Working again!!! 8)
HERE IS THE CLUE!:
- I think It had to do with the o2 radio stack upgrade that came in conflict
with T-Mobiles new 4.01.16 ROM.
- So 1st upgrade radio stack in PPC 2002 OS if you have an older radio
(i.a. 4.08) stack before you do a ROM upgrade.
- WARNING: Don't use the T-Mobile band switch 900/1900 function if the
phone is working!!! I found this is also a crucial bug and causes to crash
the GSM module with the o2 4.21 radiostack!
Question: Could annyone tell me were I can find and how I can Upgrade
my Wallaby Bootloader from v5.14 to ........
Thanks and have a good one!
Hi...
I upgraded my qtek 9100 from OS version 1.6.7.1 to cingular 1.8.11.1
The problem is that now, the phone doesn't start... the splashscreen appeears, along with... IPL 2.17
SPL 2.21
GSM 02.07.10
OS 1.8.11.1
But doesn't get out from there...
Did a do anything wrong?
PLEASE help me?
Is there any solution or is it bye bye qtek?
maybe you flashed broken or wrong rom.
start your device in bootloader mode (look in wiki how to do this) and then reflash again and if this does not work, get rom from your provider and reflash with this.
...
But my pda starts and it stays in splashscreen... is it repareble anyway?
Yes it should be fixable
Cant understand why you would want a old cingular rom (the cingular is not exactly same hardware as your phone wiza200 vc wiza100!)
You should download an aku2 rom here ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
user name xda password xda
Next get into the bootloader screen - turn device off and start with camera button pressed - should be a multicolor screen
Next attach device to pc via usb cable
Flash with above rom and all should be well
Hello ,
Excuse my poor english , i m french.
I have a big problem with my qtek 9100 , i want to flash with a new rom but i begin by cid unlock and sim unlock :
i use lokiwiz (i try with all versions) , copy enable rapi.cab on the wizard and install it
lokiwiz -> C , ok
reboot wizard
lokiwiz -> U , ok
reboot wizard
my wizard is in :
IPL 1.01
SPL 1.01
gsm 1.12.10.0
OS 1.5.4.2
i try to flash rom with the original qtek rom 2.17 and the error is 294 invalid id
i spend the night and i never find the problem
Help me please !
Hello ,
No one can help me , i tried with the all versions of lokiwiz and i can't cid unlock my phone ! what can i do ?
Yhank you
Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi
You must upgrade :
-Remove SD-Card
-Remove Sim-Card
-USPL
-Upgrade new ROM
thank. i got through to install wm 6.1.
can any one please tell me which is the most stable ROM for 6.1 or 6.5
which one is better for my HTC artemis.
please post link to the ROMs
I'm using two roms :
Shady313-23081R1 : http://forum.xda-developers.com/showthread.php?t=546805
dheewatara-s 23075B1 : http://www.pdamobiz.com/forum/forum_posts.asp?TID=255901&PN=1
same problem..pls help
i have same rom and ratio with u nomi...but my problem still occur...
where do u get the USPL eventually?
hi!
i have an SPV M650
it's running on Windows Mobile 6
IPL 1.04.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
The phone 'freezes' very often. sometimes it doesn't even starts after i try to reboot it.
I tryed: - the 'hard reset'
- to upgrade my ROM
- and when i tryed start_uspl when it reached 70% the phone restarted
I don't know what else to do
If anybody can help me resoft it, or to change it's firmware, or if anybody knows what can the problem be, i would appreciate it very much