hello all people,first sorry for bad english i try best so u understand okay
i have problem with my u8800,a friend of mine sell it to me for 20 euros bcoz it had crack and it had many missing screws but phone worked very good
i installed recovery via pink screen,flashed a cm7 but no work,then i tried to install again but cwm tell me sd card bad or something so i go to pink screen connected phone with usb and used windows built in disk managemt,there i found 3,6gb drive witch i thought was sd card so i formatted it fully it was done i took battery out and put back in but phone no turn on
plz help me this very good phone i wana use it again plzz help
Try using this method http://forum.xda-developers.com/showthread.php?t=1971266
TreckeR said:
Try using this method http://forum.xda-developers.com/showthread.php?t=1971266
Click to expand...
Click to collapse
hello,thank you for response,but the problem is i cant turn it on so no pink screen also,i also read from google that jtag or something coulb be solution to my problem but i dont know how to use it
Related
Hi Guys,
so here's the deal.
My Herald doesent work propably.
I can switch it on, it boots till the welcome Screen of WM6. Everything that happens then is that the annoying WM "busy Circle" is spinning, and the phone LED starts flashing, and thats it.
I can turn on an off the screen with the power button.
BUT if I take the sim out of the Device AND the MicoSD Card, everything works well.
But thats not the real deal I guess. Fortunately I still have warrenty but I want to make shure that it is not a simple problem I could fix myselfe.
THX Guys
just perform a Hard Reset and your problems will be solved
if u dont know, look in WIKI section
Thx for your Answer but unfortunatley it's not that easy.. I already performed a harware reset.. and I already treid to play a new rom on the device but it diesent work because the desktop pc can't connect the device via activesync.. The desktop doesn#t evene recognize the device..
a) well, you have to provide us some data.. turn off phone, hold camera+reset with the stylus and tell the numbers that r shown on ur herald screen
b) have u tried to flash via memory card?? can work
c) press power to set-standby mode. Then plug usbcable and hit power, device will "revive usb" and activesync should detect it. And go to Settings > Connection > disable advanced USB mode..
Nettzwerg said:
Hi Guys,
so here's the deal.
My Herald doesent work propably.
I can switch it on, it boots till the welcome Screen of WM6. Everything that happens then is that the annoying WM "busy Circle" is spinning, and the phone LED starts flashing, and thats it.
I can turn on an off the screen with the power button.
BUT if I take the sim out of the Device AND the MicoSD Card, everything works well.
But thats not the real deal I guess. Fortunately I still have warrenty but I want to make shure that it is not a simple problem I could fix myselfe.
THX Guys
Click to expand...
Click to collapse
This is just a shot in the dark, but have you tried someone else's sim card in your phone with out the micro sd in it? My phone started to act up, and it turned out the sim card was bad.
@ tramuyo:
Thx for your reply.. I did what you suggested, and well: BIG MAGIC happend
No just kidding.. I'm not that into PPC to know theses special tricks.
But well here is some data:
IPL 4.17.0001
SPL 4.17.0000
I have absolutly no idea how this may help but i'm pretty confident that everyone here is more an expert than me... ;-) I just use these Toys..*G
And no I did not flash via sd car.. I just used the original WM6 Flash tool provided by HTC, and that works via activesync as fare as i know.
@dougstoner:
Also Thxs for your reply but the sim works. I testet it on another phone. I wish it would be as easy
UPDATE:
Removing SIM and SD Card -> Device boots...
Rom Flashed with originial HTC WM6 -> Devie workes WITH SIM and SD Card
After several reboots for test purposes -> same problem as before... AND problem is still there when using just one card..SIM or SD Card and even when using no card...
i think ur problem is microSD card. reformat in another computer and try with your mobile
btw,
congratulations!
I already did that.. With no longing effect...
I guess I really should send the device to HTC, and say bye bye for at last 3 weeks...
And why congratulations tramuyo? Because I got that thing runnig with the help of the HTC Support
oh no.. sorry, i understand you have done it (i dont understand too good english language)
But we can give some support to avoid send it to htc
hi all i dont seem to be able to put any other roms onto my xda now i have got the htc rom on at min but i dont get any signal with a sim card in, when i try to uspl it, it doesn't go the full length, then if i try to put any other rom onto it, it comes back with the error saying the image is corrupt i am using xp so i dont know what else i can try really any help would be gratefull,
UPDATE
can some one help me with this
Checksums did NOT match!!
Could not determine a key index to decrypt it.
Your CID block must be corrupted or file isn't
from a valid CID dump!!
Aborting operation.
ok i had this problem and fixed it.
You need to install the original rom.
do you have a SD mem card?
sorry didnt read ur post properly.
Can you get into bootloader
try this. do the factory reset on this thread. it worked for me.
if you cant get it working PM me
http://forum.xda-developers.com/showthread.php?t=306904
bootloader problem
hi there thanks for ur help i cannot get (upgrade tool) the link isnt working so not sure what else to try so any help would be greatfull yeah i have a micro sd card its a 1 gig is that too big as its the smallest i have got thanks
i have just managed to install the stock o2 firmware onto the orbit but when i go to switch it on the screen fades away and goes different colours, what does it mean ????
hmm ok the screen fades away and goes into different colours.
is the screen blue/red/green stripes or does it crash into a white screen?
screen problem
i have managed to get the stock o2 rom on now and i think there could be a problem with the battery as it doesnt always switch on so i have ordered a new battery and i am hoping it will work as good as new once the new battery is in so thanks for all ur help
it could be the battery.
but in my case it was the internal clock battery that was leaking,
it could be the battery.
but in my case it was the Rechargeable Reflow Backup Capacitor that was leaking,
"it could be the battery.
but in my case it was the Rechargeable Reflow Backup Capacitor that was leaking, "
I have the same problem (new phone now but still want my p3300 to work)
is it possible to repair/change that part? could someone provide a picture or explain to me hoe to see if i got the same fault (my phone is opened)
my HTC mega is dead, wont respond or even charge anymore. It happend after i run HARDspl. I have tried doing hard reset and soft reset but don't get any response from phone
can anyone advise me what to do?
Many thanks.
I'm sorry to hear that. The file "check.bin" is created in the subdir called "1" on your PC after you ran flash-hardspl.bat
Please post it here.
Hi sorry i deleted that file..
i have tried various combination to get into the boot loader but it dosent respond to it.. do you have any idea how you can get into bootloader?
ste2009 said:
Hi sorry i deleted that file..
i have tried various combination to get into the boot loader but it dosent respond to it.. do you have any idea how you can get into bootloader?
Click to expand...
Click to collapse
Remove your battery, sim and sd cards, leave the cards out, replace the battery after a while and try and boot.
P.S. Can you "undelete" the file jockyw is after?
Dave
Hi Dave,
il give it that a try and see what happens. i will update u later...
i have tried the above, but it dosent work..
the phone just dosent respond to anything..
ste2009 said:
i have tried the above, but it dosent work..
the phone just dosent respond to anything..
Click to expand...
Click to collapse
Then I'm afraid it is a brick and at the moment there is nothing I can do for you. It's a pity you didn't keep the files for further diagnostics.
check.bin
if this file can save ur device... have you tried looking at your pc's recycle bin?
jockyw2001 said:
I'm sorry to hear that. The file "check.bin" is created in the subdir called "1" on your PC after you ran flash-hardspl.bat
Please post it here.
Click to expand...
Click to collapse
some other user can send him that file please send him.God bless his mega
this is file from my 1folder
i hope to be usefull.
Guys, you all have good intentions to support him, but there is nothing we can do right now. No need to post your files.
My mega showed some errors when it came to reporting real battery level and would not boot at one time.
You should also try to leave it charging over the night and try again.
I have tried everything but i dont get any response from the phone.
I was thinking if i get new board fitted in my phone will that get me up and running again?
ste2009 said:
I have tried everything but i dont get any response from the phone.
Click to expand...
Click to collapse
Does the PC prompt you to install new drivers if you connect the phone to PC by USB cable. To be sure the phone is on you would need to remove and reinsert the battery and then power on.
I was thinking if i get new board fitted in my phone will that get me up and running again?
Click to expand...
Click to collapse
Should normally be sufficient
Hi
i have tried all that and i dont get anything on the pc as well.. i dont get any light when i try to charge the phone, so i was thinking it could be the board?
Really looks like it yes.
ok, many thanks everyone for the help..
damn sorry to hear that ...that's real bad news ... u shouldnt deleted those files tho ... i even saved them on my PC and on the memory card ..
please help me my mega dead after hspl
To the guys with dead phones - please guys, share your phone details, if there is something specific everyone with those details wont do HSPL for now...
Hi everyone i was wondering if anyone could help me... i have several questions about my htc touch elf see i just upgraded it to the onyx 4.something version and after 4 days the wifi stoped working it wont turn on and it wont detect my sd card either... i was wondering if anyone could help me on how to degrade it to a better ROM or anything cause when i try to degrade the onyx 4.something to 3.0 it says it cant establish a conection between the phone and the computer when i run the romupgradeutlity and when i hit the upgradeimage buttom... ... please help me.. thanks a lot!
post in Onyx ROM thread and read the stickies.
Your Elf Device, Our Vogue Device
Sorry, your device is simply different internally.
http://forum.xda-developers.com/showthread.php?t=713265
rasv19 said:
Hello I was wondering if anyone could help me... i have an htc touch elf and i upgraded it to the Onyx 4.0 after 4 days of use it started giving me some trouble sometimes i hitted the touch screen and it opened something else , my wifi stoped working it wont turn on and it wont detect my micro SD... i tried downgrading to Onyx 3.0 through ROMupdateutility but when it was at 0% it said it coudlnt detect the mobile device... i was wondering if anyone could help me fix this problem cause i want my phones wifi to work and micro sd too. thanks a lot.
Click to expand...
Click to collapse
please try a hard reset, that should help solve the problems.
i doubt if this is anything to do with ROM you flashed (since you have flashed successfully, as your phone does boot.
if none of this works please post.
a hard reset should help you though.
rasv19 said:
nope it didnt worked my phones wifi still not working and its not detecting my sd card.... like wheneve ri turn blutooth on the wifi green light turns on with it but the wifi wont turn on itself and then when i go to the music thing on my phone it detects the first song i have but when i play it says theres no files and the sd card wont show up on the file explorer.... and other thing when i try upgrading or downgrading my phone by romupgrade utility i get the error 222 canot eswtablish conections between your pda and computer check usb cable.... so i dont know cause the first time i upgraded it from the manufacture ROM to the onyx 4.somethhing it went pretty great..
Click to expand...
Click to collapse
i see, error222.
please make sure that your USB cable is working.
pleasemake sure your computer has active sync 4.5 installed ( if windows XP)
or the latest WMDC (if vista or win7 )
also regarding the memory card, are u sure the card is fine ?
please put it another device/card reader and check, try formatting it and see if ur elf detects it.
ROMs usually don't have anything to do with memory drivers.
what HSPL/USPL did u flash ?
Prowess said:
Sorry, your device is simply different internally.
http://forum.xda-developers.com/showthread.php?t=713265
Click to expand...
Click to collapse
You posted in the Vogue section. I have transferred your thread to the Elf section.
yeah it works on other devices.... the usb cable is working really fine and i dont know what uspl i flashed .. . like i mean everything went rite until 4 days after i instaled the onyx 4.0 ultimate everything was working fine with it but 4 days later it started to give me that problem ... and i try to change ROM but i cant it wont let me i run active sync andeveyrthing it says its conected i run the romupdateutiliy then the status bar opens up but it stays at 0% and then the error 222 shows up... but my phone goes to the bootloader but it wont pass from there.. and when i close the romupdateutility my phone switches to the status bar but stays in 0% and then my phone crashes and i have to unbrick it.
first of all please do not open 3 different threads for the same problem, i have removed the other two.
also as aman said try posting in the the rom thread.
please read thee thread which have been stickied on the ROM development thread.
please be patient
thanks for your co-orperation.
Pls help me .. fleshovani when I get a lot of harddisk who reported that they needed to format .. somehow I managed this HDD to completely eliminate and merge.. since then the G2 not light not start .. in pc as unknown device is dead ..sorry my bad english .. THX
As far i know is ultra dead... Still try skrtool
Sent from my LG-LS980 using Tapatalk
wortos86 said:
Pls help me .. fleshovani when I get a lot of harddisk who reported that they needed to format .. somehow I managed this HDD to completely eliminate and merge.. since then the G2 not light not start .. in pc as unknown device is dead ..sorry my bad english .. THX
Click to expand...
Click to collapse
if you got the many drives and QHUSB_BULK all you have to do is flash stock with flash tools...
not it maybe more breicked..
use srk tools or try short circuit the mainboard to get sownload mode... but before that please be more specific.. we need more info on phone and exactly what happpened.