Database Users

Im so scared...!!

I just bought a t-mobile wallaby from here in india, And i decided there was a update available after 3.14 or something. so i ran it. But it stopped in the middle. Said 20 min but waited an hour. Then i took the xda of its cradle and did a hard reset... Now all it does is switches on and show t-mobile and the light stay on...nothing after that. I think i really messed it up. Gave it to a guy who said he could fix it but now 4 days later says he cant. Really need help on how to do it myself Please. Please help me, cant throw money away like that......can some show me step by step instructions as i am stupid with upgraded or reinstalling this device.

why have you decided that you could upgrade your device if you don't understand anything to upgrading and its consequences.
Upgrading is *dangerous* for dummies.
You are the weak link[/list]

mananmistry said:
I just bought a t-mobile wallaby from here in india, And i decided there was a update available after 3.14 or something. so i ran it. But it stopped in the middle. Said 20 min but waited an hour. Then i took the xda of its cradle and did a hard reset... Now all it does is switches on and show t-mobile and the light stay on...nothing after that. I think i really messed it up. Gave it to a guy who said he could fix it but now 4 days later says he cant. Really need help on how to do it myself Please. Please help me, cant throw money away like that......can some show me step by step instructions as i am stupid with upgraded or reinstalling this device.
Click to expand...
Click to collapse
:x Forget what this guest just said we are a community who help each other out :x
I am now using the XDAII but when i had the XDA1 i had a similar problem. Got stuck upgrading. Hang onto your horses dude your device isn't dead so breath a sigh of relief. If you have a SD/MMC Card reader then use it to burn the base Rom from
http://lumpistefan.dyndns.org and then install it through the boot loader(Hold the Power button and then press the soft reset button using the stylus(you will enter the boot loader mode and then follow the instructions on how to install the Rom.
------------------------------OR--------------------------------------------
Go to a shop or a friend who had similar device, make sure you have a SD/MMC card with you and then enter the bootloader mode as described above and then copy the ROM on the SD Card. Then insert the card in your device and again enter the Boot Loader mode and Copy the Rom from the SD Card to your device after you are done press the Hard reset button on your device to switch it off keep it off for atleast 60 sec before pressing the hard reset button again to switch it on. Your device will live again.
[/b]A WORD OF ADVICE
Don't touch the Radio Stack on either your device or the other one. Always select Rom only.
If you need further help with using the bootloader search these forums you'll come up with alot of info.
Let me know how it works out

one question
Thanks for the advice.....your must be the better part of the site.
what happens if i cannot get into the boot loader.
thanks again

Re: one question
mananmistry said:
Thanks for the advice.....your must be the better part of the site.
what happens if i cannot get into the boot loader.
thanks again
Click to expand...
Click to collapse
I believe there's a way to go-back! Do a flush by pressing on the power button+the hard reset+the navigation button pressed. All at once and that's how you go-back to the original ROM. Let me know if it works and if you dare to do it anyways.. 8)

guest said:
why have you decided that you could upgrade your device if you don't understand anything to upgrading and its consequences.
Upgrading is *dangerous* for dummies.
You are the weak link[/list]
Click to expand...
Click to collapse
Mr. Guest you are an idiot, many of us have been at this point one time our another. This is no way to respond to a forum member in need of help.

i'm no techie when it comes to these things but just out of curiousity WHAT causes the upgrade to stop? mananmistry said he was in the middle of upgrading already; is it the rom he used or is it the connection (power flux, cable, sync, etc)? just curious... :wink:
oh and its beers for the others and the loo for the guest

update
now the thing is i got the phone back. I have connected the usb but pc cannot find device and xdatools or the rom .exe files wont install. it says "xda not found via activesync", something like that. I went into the boot loader and it said GSM ERROR and stops. have to press calender key to get into sub-menus. what is the problem. does the rom kitchen .exe files need sactive sync to be present. please can some one tell me.
do i need a sd card reader. can i not just use someone phone to put my sd card and burn onto sd...??

You are now in serious trouble, the GSM error often proves fatal for the phone. You can still flash the rom though by following the previous instructions. After that is completed you will have to try flashing a radio stack. Please be prepared to be disappointed, I wish you the best of luck. The good news is that even if the phone doesnt work you should still have a working pda.

Where can i get a radio stack rom...???
Click to expand...
Click to collapse

where can i get a radio stack rom....will try...
If my gf has a pda with sd card can i use the unit to see the sd card and write the rom on it???

Re: update
mananmistry said:
now the thing is i got the phone back.
Click to expand...
Click to collapse
how did U get the phone back 2 work (bootloader)
thanks
:?:

get a radio stack from here
http://lumpistefan.dyndns.org/tools/

How To Force Bootloader Wizard?

i cant get my wizard to go to bootloader ? is there a way to force it ?
thnx

about: force bootloader.
Hello my friend, please use the search options, is easy to find answer for your questions. Here you will find the solution:
http://forum.xda-developers.com/showthread.php?t=294107
note: use the wiki

hi,
thnx for the help.. i did follow the steps mentioned.. but it styll doesnt wrk. whn i try to flash the rom.. it supposedly looses connection wid the computer .. the screen looses the light buh the wizard is on all the way.. u cant use it though.. buh the lights are still blinkin.. (the wifi and phone)
thnx

hey, my mda doesnt even turn on anymore, do u guys think its the battery but the battery was fine when i flashed it but then it doesnt boot to the window, so i took the battery out and put it back in and it doesnt turn on anymore.. i tried the camera, rest button and other stuffs. do u think my phone is bricked? or i should def. get a new battery and try it out?

I suggest you back to your Official rom first then start over again. I do this many times. Activesync always loose its connection before start flashing. It's a normal procedure. When you mention that your Wizard is still up and on the way, what you mean exatcly? Be more specific bringing point details on where you are stuck for instance. Then I'll try to help you out.
Good luck.
cellphoneman said:
hi,
thnx for the help.. i did follow the steps mentioned.. but it styll doesnt wrk. whn i try to flash the rom.. it supposedly looses connection wid the computer .. the screen looses the light buh the wizard is on all the way.. u cant use it though.. buh the lights are still blinkin.. (the wifi and phone)
thnx
Click to expand...
Click to collapse

Sounds a power problem to me. I've been into this couple of times after being in a bootloader mode for a long time. Plug the Wizard directly into the powerwall to start charging then back to your flashing process first doing with an official rom. I don't think you have bricked it.
joco2560 said:
hey, my mda doesnt even turn on anymore, do u guys think its the battery but the battery was fine when i flashed it but then it doesnt boot to the window, so i took the battery out and put it back in and it doesnt turn on anymore.. i tried the camera, rest button and other stuffs. do u think my phone is bricked? or i should def. get a new battery and try it out?
Click to expand...
Click to collapse

epimazzo said:
Sounds a power problem to me. I've been into this couple of times after being in a bootloader mode for a long time. Plug the Wizard directly into the powerwall to start charging then back to your flashing process first doing with an official rom. I don't think you have bricked it.
Click to expand...
Click to collapse
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc

Try to enter in a bootloader mode by hold on the camera button while pressing the reset button. You'll go to bootloader. If not, remove battery one more time, wait seconds and put it in back. Then, force bootloader again and try to charge through powerwall. You should get an orange light or similar during recharging. Check your model. Hope it helps you this time.
joco2560 said:
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Click to expand...
Click to collapse

joco2560 said:
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Click to expand...
Click to collapse
which version is it ,G3 or G4,and which Rom were trying to upgrade with.
Well,if its a G3 then,there's some power problem,but if it's a G4 and you tried to flash a Rom with IPL/SPL included,well its a brick.

Yeah...unfortunately zabardast_1 is right about your device. If it is a G4 and you flashed a G3 ROM, you could have bricked your techtoy! Hope you knew what you was doing at that time!
Try to always provide enought information regarding your environment and device so we can help you out better!

touch dual stuck in tri-colour

hi folks,
I am in real trouble. while trying to unlock i hard-resetted it, but now the phone is got stuck in tri-colour mode, I don't know what to do. Basically now it went like funny. it would not turn on, while u put it on to charge it will show the tri-colour and also if i leave it on charge it is getting hot. Do u guys recon any chip to be hitted?
if u need to know anything else pls let me know.
Regards

have you loaded a rom on to it?

hi there,
Not actually, basically one of my friend tried to unlock it in first place. I don't really know what he did with that. but the phone is totally dead now. If anyone can help me that will be highly appreciated because this phone is not mine, this is customer's.
If he tried to put rom on it what consequence would happen and is there any way to get out of there?
Regards

windows software gone
Hello there,
It's me again. I think on this the software is missing. Because if i connect it to the computer it brings on the tri-colour and shows usb connection. So, the software i think missing. If anyone can give me a link how to put the software in there i will appreciate that. But still i am not pretty sure why it is getting hot while charge and why it is not turning on even it charged.
thanx

NetrunnerAT said:
If you are stuck in the bootloader, download MTTY, connect via USB (Activ Sync must disabled via USB!!!) and type the Command "boot"
Click to expand...
Click to collapse
Try it ... search for Tri-Color or Bootloader Mode.

still no solution
No success mate. I have downloaded the mtty. and it says usb port cannot open. but if i go to com3 it allows me to write something over there. i write boot on it but nothing happening , and actually i don't know what would happen?
regards

Try it again ... again ... again ... you need to connect VIA USB!!!!!!!!
If he cant Open ... shut down your Activ Sync!
If you cant ... use a other PC. Vista have some bugs and Windows XP 64 too.

[Q] Help With My Touch Pro 2

Ive Asked On The TP2 Thread Or W.e And No One Has Answered Back And I Need Help With This Phone......With Out The Charger Pluged In It Dosent Turn On And The Light Dosent Come On........With The Charger Pluged In The Light Goes And The Screen Dosent Turn On For A While....Then It Starts Up The AT&T Logo And Just Continously Loops The AT&T Logo And Ive Flashed New Roms Continuoulsy And It Never Worked, I Also Tried Task 29 but im not sure if im doing it right in the folder there was a file Rom Update Utility And Thats Wat I Ran And It Still Dosent Work

Ganjagreenboy said:
Ive Asked On The TP2 Thread Or W.e And No One Has Answered Back And I Need Help With This Phone......With Out The Charger Pluged In It Dosent Turn On And The Light Dosent Come On........With The Charger Pluged In The Light Goes And The Screen Dosent Turn On For A While....Then It Starts Up The AT&T Logo And Just Continously Loops The AT&T Logo And Ive Flashed New Roms Continuoulsy And It Never Worked, I Also Tried Task 29 but im not sure if im doing it right in the folder there was a file Rom Update Utility And Thats Wat I Ran And It Still Dosent Work
Click to expand...
Click to collapse
Try a Hard Reset or re-flash your rom.

How do I hard reset?

Ganjagreenboy said:
How do I hard reset?
Click to expand...
Click to collapse
Sorry mate, i don't have a touchpro, i'm just trying to help Refer to your user manual guide.
p.s - you can thank me if i've helped

Ganjagreenboy said:
How do I hard reset?
Click to expand...
Click to collapse
You really need to read, this is posted everywhere in the TP2 area
http://tinyurl.com/36s3yuo

None oF this worked

Htc hd2 bricked

Hello,
OMG, I think i bricke dmy phone.. I had android 2.3.7 from CYANOGEN MOD, and wanted back to WINMO... I downloaded from HTC, Put in on USB in tricolour screen. It started fine, got stuck at 8% and got fail message. :S I took battery out and in, and it can't boot now. It stands HARDWARE MEMORY FAILED or something :S
What the **** can I do??? :S I run the HTC stock rom from computer through USB. PLEASE GUYS I NEED HELP!!!!!!
It states MEMORY UPDATE FAILED, PLEASE TRY AGAIN and goes into tricolor screen.
Any help???

What "MEMORY UPDATE FAILED"? On where? Do you mean on the tri-color screen when updating with leoimg.nbh?
Btw, if everything failed, JTAG is your friend

hopkinskong said:
What "MEMORY UPDATE FAILED"? On where? Do you mean on the tri-color screen when updating with leoimg.nbh?
Btw, if everything failed, JTAG is your friend
Click to expand...
Click to collapse
Thanks for the help bro!! Memory failed when I turn on the phone normally, the directs me to tricolor screen. :S I did not run "leoimg.nbh". Just run the regular ROM
file from HTC, the whole file.. Then got stuck since it couldn't recognize or something. :S
Should I put the leoimb.nbh to root level and try boot into tricolor screen? Will it try installing automatically?
And the cyanogemod file is placed on root as well. Should I delete it or just leave it? :S There are also other android.secure etc. files there. Just random. I installed NAND android!!
Please help mate..

BUMP. Can anyone please help? :S

BUMP. I really don't want to brick my phone! :S

Nicuu said:
BUMP. I really don't want to brick my phone! :S
Click to expand...
Click to collapse
Ha Ha Ha

donababe77 said:
Ha Ha Ha
Click to expand...
Click to collapse
What's so funny about that?

Closed, post in proper device section