hi folks,
I am in real trouble. while trying to unlock i hard-resetted it, but now the phone is got stuck in tri-colour mode, I don't know what to do. Basically now it went like funny. it would not turn on, while u put it on to charge it will show the tri-colour and also if i leave it on charge it is getting hot. Do u guys recon any chip to be hitted?
if u need to know anything else pls let me know.
Regards
have you loaded a rom on to it?
hi there,
Not actually, basically one of my friend tried to unlock it in first place. I don't really know what he did with that. but the phone is totally dead now. If anyone can help me that will be highly appreciated because this phone is not mine, this is customer's.
If he tried to put rom on it what consequence would happen and is there any way to get out of there?
Regards
windows software gone
Hello there,
It's me again. I think on this the software is missing. Because if i connect it to the computer it brings on the tri-colour and shows usb connection. So, the software i think missing. If anyone can give me a link how to put the software in there i will appreciate that. But still i am not pretty sure why it is getting hot while charge and why it is not turning on even it charged.
thanx
NetrunnerAT said:
If you are stuck in the bootloader, download MTTY, connect via USB (Activ Sync must disabled via USB!!!) and type the Command "boot"
Click to expand...
Click to collapse
Try it ... search for Tri-Color or Bootloader Mode.
still no solution
No success mate. I have downloaded the mtty. and it says usb port cannot open. but if i go to com3 it allows me to write something over there. i write boot on it but nothing happening , and actually i don't know what would happen?
regards
Try it again ... again ... again ... you need to connect VIA USB!!!!!!!!
If he cant Open ... shut down your Activ Sync!
If you cant ... use a other PC. Vista have some bugs and Windows XP 64 too.
Related
Hi all.
Need some help really bad. Tried to upgrade my magician (s100) to ROM 1.11.133WWE from qtek.se.
Did exactly as it said I had to but as soon as I started the upgrading my magician went all dead and black and the install shield wizard went down. The only thing left on the computer screen is a box that says: "checking the information on your device... please wait...
Please dont disconnect your device from your PC until the update is completed".
So what do I do?!?!
Am desperate to get my device working again!
Please please help me!
I'm really sorry to here this ... anyway..
As far as I know.. u have my to disconnect ur PPC from the USB cable, then restart PC, u should continue to upgrade after u PC restarts..
u may also try to change the port of the USB cable as well...
this may work on Win XP, I don't know anything about other OS..
I'm not sure about this since I did not face this problem b4..but this solution was reported in another forum ( and maybe here )
I hope this will help...and maybe someone else could give u more INFO...
cheers
Alive!
Got it working!
Did a couple of reboots and that made the trick...
Now, my only problem is that I cant seem to restore my backup-files
Does anyone know where I can download the free program o2plus that I had earlier? Can´t find it anywhere. Loved that thing...
Thanx!
I believe it is better if u do a new fresh installation of everything instead of making a restoration
many users reported problems when restoring after an upgrade...
mostly, ur device will become very slow ....
My friend's jamin when he tried upgrading with smart1 wm6
after the flashing process finished it gives the 3 colors of boot loader
the screen flickers continously with the 3 colors
no way to hard reset the device
and activesync doesn't feel it
I searched all the forum for a problem like this but I didn't find any
any suggestion please, or any help?
Flash NVID Rom and try Smart again. Read WM6 upgrade Manuel and readme for the ROM.
NetrunnerAT said:
Flash NVID Rom and try Smart again. Read WM6 upgrade Manuel and readme for the ROM.
Click to expand...
Click to collapse
Please how can i flash with the activesync doesn't notice my device and where's NVID Rom
Ok. I'll search for it but please help how can I flash it to the device which doesn't recognized or felt by PC
If your device is in bootloader mode, activesync cannot recognize it but this is normal. Jamin is recognize only as a usb device and you can downgrade it to NVID rom easly.
Then you could upgrade your favorite rom, I suggest PDAVIET 4.0.0.1
Bye for now
divxmaniak said:
If your device is in bootloader mode, activesync cannot recognize it but this is normal. Jamin is recognize only as a usb device and you can downgrade it to NVID rom easly.
Then you could upgrade your favorite rom, I suggest PDAVIET 4.0.0.1
Bye for now
Click to expand...
Click to collapse
I think I didn't discuss the problem well
The Problem is when I start to flashing a rom a message tells that check if the usb is connected and if the device is connected .
This is happen with the device is connected to the cable and the tricolor screen is flicking . and the device doesn't open doesn't flashing.
must use NVID rom. maybe qtek nvid one from here? http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
hasanemara said:
I think I didn't discuss the problem well
The Problem is when I start to flashing a rom a message tells that check if the usb is connected and if the device is connected .
This is happen with the device is connected to the cable and the tricolor screen is flicking . and the device doesn't open doesn't flashing.
Click to expand...
Click to collapse
If the problem still there, Try to release the battery for 1-3 hours and put it again to the device, go to the boot loader and pray. Hopefully it could work. Actually, this way worked on my Himalaya and Prophet.
Just run the "Step 1" component of the PDAViet ROM (http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip), which is just a plain AKU 2.20 NVID. This will find your device even if its in bootloader mode (it doesnt depend on activesync). Just flash it with that sucker and you should have a working phone on WM5, then you can safely upgrade it to WM6 (or leave it if you like).
ekto said:
Just run the "Step 1" component of the PDAViet ROM (http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip), which is just a plain AKU 2.20 NVID. This will find your device even if its in bootloader mode (it doesnt depend on activesync). Just flash it with that sucker and you should have a working phone on WM5, then you can safely upgrade it to WM6 (or leave it if you like).
Click to expand...
Click to collapse
I shall try and tell you the result
error 260 this is the result
i have a slight variation problem like this...
1. i was upgrading my O2 Neo to the latest WM05 & the phone went to bootloader mode & the upgrade started searching for the phone as normal..then some error & it stopped upgrading while the phone was in bootloader mode..
2. at that time,i got an urgent call & had to leave the phone in bootloader mode...
3. when i came back..the phone was dead & now it wont startup at all.. not even in the bootloader mode.
4. Maybe the batteries dead...so i charged it (Over night)..nothing happened in the morning..
5. kept the battery removed for about 5-6hours & still nothing happens..it simply does not startup.
6.I've tried holding the camera button & resetting, but it wont go into bootloader mode.
7. i;ve tried holding the connections button + camera button _ reset but it wont hard reset...
can anyone help me here...
what can i do???
hasanemara said:
error 260 this is the result
Click to expand...
Click to collapse
Error 260... If i remember correctly that's "cant find device" or something.
Few things to check:
Is the PC you are upgrading on running windows vista?
If so, use a different PC running windows XP.
Have you tried a different USB cable?
If not, do so, this tends to be the cause of problems like this.
Have you checked device manager?
Go to control panel, Administrative tools, computer management, device manager and see if you can find your device. If it has a yellow ! icon on it or is listed as "Unknown device" or anything like that then you may need to reinstall the drivers (int hsi case the easiest way to do that is to reinstall activesync). If everyhting is working properly it should show up as "HTC USB Sync", "PocketPC USB Sync" or something like that under the heading "Mobile Devices".
Have you just plain tried another computer, regardless of the OS?
I found that I could never get my phone to flash on my laptop, but it worked without a problem on my desktop. This is not to say laptop's cant do it, it simply means some computers just have problems like (in my case i believe) no USB 2.0, or too low-powered USB ports.
ekto said:
Error 260... If i remember correctly that's "cant find device" or something.
Few things to check:
Is the PC you are upgrading on running windows vista?
If so, use a different PC running windows XP.
Have you tried a different USB cable?
If not, do so, this tends to be the cause of problems like this.
Have you checked device manager?
Go to control panel, Administrative tools, computer management, device manager and see if you can find your device. If it has a yellow ! icon on it or is listed as "Unknown device" or anything like that then you may need to reinstall the drivers (int hsi case the easiest way to do that is to reinstall activesync). If everyhting is working properly it should show up as "HTC USB Sync", "PocketPC USB Sync" or something like that under the heading "Mobile Devices".
Have you just plain tried another computer, regardless of the OS?
I found that I could never get my phone to flash on my laptop, but it worked without a problem on my desktop. This is not to say laptop's cant do it, it simply means some computers just have problems like (in my case i believe) no USB 2.0, or too low-powered USB ports.
Click to expand...
Click to collapse
No I didn't change any and I can connect my o2 xda mini to the same cable
I want to ask few technical question
HOW CAN A SOFTWARE DAMAGE THE DEVICE?
CAN A SOFTWARE FOR EXAMPLE BURNS A PROCESSOR OR SOMETHING LIKE THIS?
If So there will be a big problem with those types of devices
a virus for example can destroy my device's board or processor!!
Yesterday My friend went to an I-mate customer service who tel him that
the board had been destroyed by the bad software !!!!!!!!!
Please Give me technical advice about this problem
and is there a web site for him to buy this board (i-mate jamin)?
I've tried everything... even tried it on my desktop... but my phone just wont turn on now. i've kept the battery removed for more than 8hrs now... i've even charged it for more than 8hrs non-stop..nothing happens..
maybe i should get hold of a charged battery & try it with that battery...?
Any clue how to get my phone started??
got it working !!! PHEW... i used my HP battery which was charged & put it into it..now i've got my bootloader & i'm installing the new OS as we speak... 15% done.... keeping my fingers crossed
done.. got my HP Ipaq battery , which was charged & my new started up in bootloader more.. PHEW !!!
66% done... keeping my fingers crossed
ok, installed...now, one more problem..my touch screen's not working...???
Any idea what to do?
i installed "Prophet_PDAViet_Step1"
I need help! urgently! I need to fix this phone (hw6925) and I do not know how... can anyone help me on this? It is stuck at bootloader, I tried replacing the rom but nothing... I can have access to another phone of the exact model but I dont know how to get the rom out of that... I tried getting the bin and transferring it through mtty but still I cannot get it to work... any help?
Is the bootloader stuck in Serial or USB? If Serial, take out battery, let the screen fade away until you barely see the HP logo, put battery back in along with cover, dock the PDA with power, it should change back to USB. Download the rom from HP website, 6945 should work, and flash.
Join the Club
absolutn said:
I need help! urgently! I need to fix this phone (hw6925) and I do not know how... can anyone help me on this? It is stuck at bootloader, I tried replacing the rom but nothing... I can have access to another phone of the exact model but I dont know how to get the rom out of that... I tried getting the bin and transferring it through mtty but still I cannot get it to work... any help?
Click to expand...
Click to collapse
Here is how to get it out of HP Invent Logo, G.39 .......
soft reset, do not connect yet
press ctrl, alt delete, if on xp, find process wcescomm........., end that process if it is running. plug in data cable for our $600.00 Paperweight, It should now say "USB" instead of "SERIAL" on the hw6925........, now run mtty,
change the port to that w one, you know the one one, if not its the one that does not say comm, or just click on usb to the right, if there is one, next when it opens up the new screen, it should say something like "USB>"
type, " set 14 0 "
now soft reset hw6925,
Should go back to Booting up normally, now for people like me with the "NO GSM AT Startup, we are F"C"ED
someone i change the model number on my hw6925 to a 6915, still no gsm, any of you programmers want to help us out, please do, I will be the first to donate
does anyone know how to upgrade the bootloader on the himalaya at the moment mine reads at the top of the screen SERIAL and at the bottom V1.01.
I have a file which i think is a upgrade [boot_1.06.nb0]
but i have to need to know the do's and dont's as i would think this would be if done wrong brick my himalaya?
any help or links would be thankfull?
advanced15 said:
does anyone know how to upgrade the bootloader on the himalaya at the moment mine reads at the top of the screen SERIAL and at the bottom V1.01.
I have a file which i think is a upgrade [boot_1.06.nb0]
but i have to need to know the do's and dont's as i would think this would be if done wrong brick my himalaya?
any help or links would be thankfull?
Click to expand...
Click to collapse
The only one question is
Why the hell you want to do that?
I have 1.01 also on my second today-use himalaya and it is really stable and works same as 1.06, but has some debugging output in mtty which is so useful
I tried also to upgrade it and I failed.
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
mikeymcmk said:
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
Click to expand...
Click to collapse
Hay mickey tell me that are you able to sync data or contects,msgs etc with system without disconnecting ?????????
or sometimes connection disconnects automatically ????/
if yes then put something stable thing in between data cable & device.
reply soon
KAASHP said:
Hay mickey tell me that are you able to sync data or contects,msgs etc with system without disconnecting ?????????
or sometimes connection disconnects automatically ????/
if yes then put something stable thing in between data cable & device.
reply soon
Click to expand...
Click to collapse
if anybody have same problem do as per my suggestion
put something in between data cable & device if you connect it without disconnection then it works flash the rom after putting it in bootloader mode
Don't do it
the bootloader is the main program which executes the system programs so avoid to upgrade bootloder.
the result will be permanent damage to your lovable device...
it can't boot more. so be careful.
no need to upgrade it as per my suggestion.
Hello there,
As for the beggining I would like to say that i have read all topics reffering hd2 white screen stuck on this forums already, but i wasnt sure if i can reffer to them in my situation. I would really aprichiate any help from experts in those "things".
So my situation looks like this. I have a htc hd2, that is stuck on htc thite logging screen. I received it just today, all i know is that there was some different roms being installed on it. I would like to wipe it and make it work again. The thing is i dont see any usb storages on my pc when i connect it via usb, even though the card is there (i belive it is initialised while the device is fully on). Anyways i gues that i cant connect with pc - telephone.
What i tried to do is wipe it with home button + volume up- It havent worked.
I check up other topics where u guys said to reflash the rom etc, but i have no usb communication.
I would like to belive that this phone is not a brick now... If anyone is familliar with this problem, i would aprichiate any help.
Are you able to enter bootloader(tricolour screen)?
Ill be happy to try out, could you tell me how to do that?
I found out, is there anything i can do while im there?
and me too.I have a HD2 with this problem.Are any resolve for this?
hamrahgostar said:
and me too.I have a HD2 with this problem.Are any resolve for this?
Click to expand...
Click to collapse
You have to download the hd2 toolkit and when you are in the tricolour screen then connect it to the pc and then it see the new hardware and install the drivers hen automatic after that you will see you phone will go in usb modus.
Then use the HD2 toolkit in administator modus
all you have to decide is what os you will be using Android or windows 7.5.
I installed windows 7.8 yesterday made by ansar and works like a charm it looks like windows 8 mobile now.
There are enough sources here for you to find out how to put on a new rom it`s verry easy .:good: