Related
Ok, so after moving house i have lost the data cable that came with my phone. However i have got another cable that fits, however it does not recognise it on the pc, the phone takes power from the cable however active sync nor device manager seems to find the phone, is this because it isnt the proper cable or have i got a bigger problem?
Nevermind, I found a new cable and it works, now im running a nice new rom
Could you someone please close this thread now?
Argh, I am pulling my hair out trying to solve this! When I connect my phone through USB to my computer my phone detects the connection but my computer doesn't respond at all! I bought the phone used and it is already rooted but is using a pretty old rom and I wanted to upgrade it. It is currently running "Kernel version: 2.6.32.9 [email protected] #4".
Things I have tried:
Using different USB settings on the phone (Kies, mass storage, ask on connection)
USB debugging mode
Different USB cables
Different computers
Cleaning the micro usb port on the phone
Formatting SD card
wide data/factory reset
Nothing seems to accomplish anything, it still reacts in the same way.
Any help would be greatly appreciated!
The ROM shouldn't count.
First of all, has it ever worked? I just presume you're running on win7: did you installed the drivers as specified in several different tutorials on this forum?
What kind of connection are you trying to establish? tether, usb, kies, other? have you tried any combination possible?
I just got the phone a couple days ago, I have not managed to get it to be detected by anything yet. I have tried it on a couple Win 7 boxes and also a Vista laptop. I am currently downloading Ubuntu just to rule out the OS factor. I have just been using Kies to install drivers although after reading your post I found this thread:
http://forum.xda-developers.com/showthread.php?t=961956
I'll try that and post results if that is what you mean? I have been trying to establish basically any connection at all for the ultimate goal of getting Odin to actually detect the phone so I can flash it with ClockworkMod Recovery and then an ICS rom. The phone detects the USB cable fine and starts charging and puts the phone into whatever mode I want (kies, mass storage, etc.) but the computer has yet to give any indication that anything is connected to it.
Try with the drivers, but be also sure to enable usb debugging to be able to select a different usb sharing when inserting the cable in case you haven't already.
The drivers installation didn't make any difference and I've tried USB debugging and all 3 connection modes (Kies, mass storage and media player), none of which exhibit any response from the PC.
Edit: Posting from Ubuntu now, same exact thing. Phone detects USB connection, and it doesn't matter which of the connection options I choose as the PC doesn't give any indication that anything has been connected to it.
That's really weird. Does Odin3 (which presumably works at a lower level) sees anything if you put the phone in download mode? ) this way you should be probably able to upgrade somehow.
Sent from my galaxys using XDA App
No unfortunately there is no response from the computer or Odin3 when the phone is in download mode and connected through USB.
that's odd and maybe that's not good at all.
I'm starting to think the problem could be hardware related, especially in a situation where odin can't see the phone in download mode (i.e. no software layer is interfering).
Is there any glaring damage/scratch/missing parts on the usb port?
Sincerely, if I could return it I would try that at this point.
Unless someone else has got anything else to try.
I'll take a good look at it under a scope when I go to work on Monday I guess. Thanks for your input, I'll try to update if I find out anything else!
So I took a look at the port under a scope today and discovered that one of the pins (the middle one) in the micro usb port on the phone seems to be completely gone! Not sure what each pin does but I'm assuming that one is probably used to communicate to whatever the phone is connected to...
Luckily I have access to a parts phone that I can take apart for a replacement port so probably tomorrow I will attempt surgery on the phone! Will report back with further progress after I have done so.
Well I'm happy to report that that was definitely the problem! I replaced the micro USB port on the phone today during my lunch break, put the phone back together and plugged it into a PC here. It immediately detected the phone so I'm pretty happy! Guess I'll be trying out some ICS roms tonight when I get home!
that's great, glad you managed you fix this yourself, well done and enjoy your SGS
Hi,
I'm having a real though time trying to connect my galaxy s1 to a pc. Have tried everything, like kies, direct connection, reseted the device, and no joy.
When I plug the cable it makes that sound as it is connecting but it doesn't show in the PC anywhere, nor even in Device manager.
It can get pwr from the usb cable when is connected; already tried with another cable and same thing.
My final goal is to unlock it.
thanks for any help
have you tried put yoy're phone in depurating mode?
I guess yo mean Debugging mode, as I couldn't found Depurating anywhere. Have selected it and the same effect
HI
I had the same problem after getting nowhere with it, for some reason and I don"t know why, I put it in download mode and then connected it to odin and my PC found it I then disconected it and its been fine eversince.
Jim
#Samsung Kies always makes problems on Windows x64 !
##I would recommend, if you got 32-Bit Computer, to use that ;-)
#If you Want just flash over Odin, then is this driver package enough
##[Link]--http://download2us.softpedia.com/dl/85b009d47a0940e89eee2297a531d100/4f577870/300141878/drivers/mobile/SAMSUNG_USB_Driver_for_Mobile_Phones_1.4.8.0.exe
#The Package is also enough for If you want just to connect to mass Storage (Phone's SD Card)
Don't Forget to Thanks, if it was useful for you!
_______________________________________________
Hi there.
By direct connection you mean the USB Mass Storage mode, right?
It might be some weird, random problem with the samsung system drivers. I used to have such problems about two years ago, back in the days of Froyo. Have you tried re-installing them? There was a link to proper drivers file in one ICS installation tutorial, and those drivers can be downloaded here. If you go about trying this method, lemme know if it worked.
Cheers.
PS: Unlike diklooc there suggested, do not never EVER go back to x86 OS. That's the worst advice. Kapisch?
Did you check your usb port in System ?
Sometimes it stuck with another lastest device
Hi,
have tried everything, and finally only in a WinXP32 could be abble to get the error shown on the file atached.
But nothing (warnings) come up in Device Manager
Unninstalled everything (kies) and tried to install only the driver and nothing happens.
Should I try to mount it on a linux?
or is it dead?
thanks
i have this problem too
wat chan I do???
my sgs can not connect to my PC
This may help...
Hi there - I don't have the same phone as you, but I did encounter the exact same problem. I've been searching around and it looks like the most common fix was to simply replace the cable. I don't know what kind of cable you have, but my phone (a Samsung Focus i917) uses a mini-usb connector. I found that my Amazon Kindle used the same connector.
When I was using the Samsung cable, I'd get intermittent connects and charge power. The OS would report unknown device. When I switched computer's = same result. I switched to my Kindle cable and the computer instantly recognized the device and installed the drivers. After 12 hours of troubleshooting, factory resetting my phone (blah - lost everything) it turned out to be the cable. I know that this isn't an easy troubleshooting step for most people, because who has an extra cable? I just got lucky that my Kindle uses the same connector. I'm now suspecting (due to the prevalence of this connectivity problem coming from people with Samsung phones - there are a LOT of reported issues) that there is probably a Samsung cable problem in general.
Good luck with your phone.
try
try select mass strong ...
Tips and unlock advice.
nasdriver said:
Hi,
I'm having a real though time trying to connect my galaxy s1 to a pc. Have tried everything, like kies, direct connection, reseted the device, and no joy.
When I plug the cable it makes that sound as it is connecting but it doesn't show in the PC anywhere, nor even in Device manager.
It can get pwr from the usb cable when is connected; already tried with another cable and same thing.
My final goal is to unlock it.
thanks for any help
Click to expand...
Click to collapse
Nasdriver, I currently have a similar problem but mine is related with Samsung Kies as I can't get either my older SGS1 or my newer Samsung Nexus to get recognized by Kies. I also suspected the cable thing and even read it could be a USB port issue but neither of them was my problem (I have 3 cables and 8 ports on 2 computers that result in the same thing). I can connect other devices with the same cables and they work, so I suspect my problem is focused around the Samsung device drivers.
My advice is if you can go in a systematic manner, first focus on the cable (easiest to replace), if you get the same results with a new cable, then focus on the USB physical port, clean it with some Isopropyl alcohol, if the port works for other devices (camera, other phones, etc..) on the same cable but not with the SGS, then try reinstalling the samsung device drivers.
Oh, and if you want to unlock your phone, the EASY way is to download the Galaxy S Unlock application from the Android market (no affiliation) it's free (but the developer does accept donations) and it WORKS. I won't bore you with my 3 week journey trying to unlock my Bell SGS phone here in Canada, had I found this app first I would have done it in less then 2 min saved myself a LOT of frustration.
Good luck
Hi guys!
I've had a problem over the day with my beloved HD2, and I've started to fear that it might actually be the hardware starting to decay. About a day or two ago, when inserting my phone to the MicroUSB cable, it recognized the HD2 just fine, had access too USB mount, ADB and all of that. Transfered some music to the SD-card (Trancent 16gigs Class 4, btw - still very well recognized by the phone to the time at writing this), but now, some time later I get nothing out of connecting the phone to either my laptop or rig.
I know it's not the drivers or the cable, since I've tried with others cables and a few other computers. The message is the same old "The device could not be recognized". But the funny thing is, somehow the device must know that its connected to a computer anyway, 'cause it instantly enables debugging and the option to enable mount. I, as of now, has had no luck getting into the SD card, sadly. Not even been able to pull logcats or anything, setting up wireless ADB hasn't been sucessful either - so where I stand now, I'm kinda in need for a helping hand.
Has anyone else ever had this problem too, or am I left out in the cold?
By the way, even managed to put on an older nightly CM9 build, as it was stored on my SD. No luck there either. MAGLDR mount / recovery mount doesn't function either. Same error.
The ROM I first had the problem on was PARANOIDANDROID v0.6. Then a nightly CM9 from sometime last week. Both immensely close to stock and ICS based. LEO512, by the way.
Please, give me a hand!
TL;DR: USB broken, still charging, help.
Your usb is getting loose (usb data connection becomes irratic and then stops working, continued use results in USB port ripped from mainboard), try to not use it while plugged in and see if the repair shop can fix it for you without breaking usb data. You can use the SwiFTP app in playstore to transfer files in the mean time.
You may also want to use a cradle charger to minimize USB port being used.
Hey all. Just got my Galaxy S4 today and I was loving everything about it until... right now. For some reason, the darn USB won't stay connected to the computer. It doesn't matter if it's simply plugged into the computer as an "installer" or as a media device. It'll constantly disconnect and reconnect itself, even when I'm not transferring any files.
It's not the my computer/USB ports, either, since I can transfer files between my HTC Thunderbolt and Nexus 7 fine. I've also tested 2 other USB cables and they all behave the same way.
Anyone know what's going on? Did I get a lemon?
No im in the same boat. Was trying ti connect in today. I reinstalled and un installed the drivers about 4 times. Tried un selecting usb debugging in developers menu. Installed kies and used the drivers from it still no good. Used 3 different usb leads. Phone will still charge from pc and even when im installing the drivers again and connect the phone it will say that your new device is ready to use but still cant access phone, it simply does not show up.
Wouldn mind was working 2 days ago fine. Same usb port and all. And the port is fine cause my old s3 still reads from the same port.
snwman said:
No im in the same boat. Was trying ti connect in today. I reinstalled and un installed the drivers about 4 times. Tried un selecting usb debugging in developers menu. Installed kies and used the drivers from it still no good. Used 3 different usb leads. Phone will still charge from pc and even when im installing the drivers again and connect the phone it will say that your new device is ready to use but still cant access phone, it simply does not show up.
Wouldn mind was working 2 days ago fine. Same usb port and all. And the port is fine cause my old s3 still reads from the same port.
Click to expand...
Click to collapse
same problem with me!
every thing ok with s3 but the problem only with s4
please we need help to solve this problem!
Same problem
I have also been dealing with this for a while now. I have Windows 7 64bit and I have reinstalled the drivers many times through Kies and manually. It seems like the problem is getting worse since initially I could do some file transfer through usb if i fiddled with the device (changing usb ports, unplugging it, etc). Now I am hard pressed to get it to show up on the computer through MTP at all.
This is quite annoying since I am developing an android app and I need a usb connection in order to test it. A fix would be awesome.
I just tested on my sister's laptop and it doesn't have this problem. I clicked around the phone, transferred a 10gb movie, and left it plugged in to see if there were any signs of disconnects. None whatsoever. Odd. Maybe Galaxy S4 just doesn't like something with our computers. This is quite annoying.
I have a fresh Windows 7 64-bit partition I installed the other day so I'll test it out on that and report the results later today.
retsnom said:
I just tested on my sister's laptop and it doesn't have this problem. I clicked around the phone, transferred a 10gb movie, and left it plugged in to see if there were any signs of disconnects. None whatsoever. Odd. Maybe Galaxy S4 just doesn't like something with our computers. This is quite annoying.
I have a fresh Windows 7 64-bit partition I installed the other day so I'll test it out on that and report the results later today.
Click to expand...
Click to collapse
I do same thing, it is worked in another computer.
I am already put fresh win 7 but still same problem..
im on xp(retro yeah ha ha) but just a pc i have for my phones and stuff. But i got it working again by flashing my firmware through odin and its back working. Im blaming when i rooted it that it broke but ill see if it happens again
edit: Can confirm pc is now picking up phone. I just flashed the most recent stock rom for my carrier through odin and as soon as it finished updating its prefect now. Might wait another while to root it now and wait for more devs to jump aboard for more roms
snwman said:
im on xp(retro yeah ha ha) but just a pc i have for my phones and stuff. But i got it working again by flashing my firmware through odin and its back working. Im blaming when i rooted it that it broke but ill see if it happens again
edit: Can confirm pc is now picking up phone. I just flashed the most recent stock rom for my carrier through odin and as soon as it finished updating its prefect now. Might wait another while to root it now and wait for more devs to jump aboard for more roms
Click to expand...
Click to collapse
I'm on stock, no root.
Hi
I don't know if it may help but i noticed the usb doesn't work when the phone is locked.
I did check 'stay active while charging' in dev parameters and i never got disconnected again.
Sent from my GT-I9505 using xda app-developers app
Tested it out on a fresh copy of Windows 7 and it still continuously disconnect. What gives?
taargaa said:
Hi
I don't know if it may help but i noticed the usb doesn't work when the phone is locked.
I did check 'stay active while charging' in dev parameters and i never got disconnected again.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Oops, missed your post. Unfortunately, it disconnects regardless of the phone's state.
My friend's S4 was doing the same thing on his desktop. Every time he would try to transfer pics the phone would disconnect after a few files.
I tried different things from reinstalling drivers to trying to only copy over a couple of files at a time, nothing worked.
Finally I plugged his phone into one of the back usb ports and transferred over 2gb with no problem and no disconnects since.
My guess is the S4 is a power hog and some usb ports just don't supply enough juice. Try plugging it in to a usb port that comes off a motherboard. Don't use the front ports or usb hubs. Hope this helps someone.
dirrtpoor said:
My friend's S4 was doing the same thing on his desktop. Every time he would try to transfer pics the phone would disconnect after a few files.
I tried different things from reinstalling drivers to trying to only copy over a couple of files at a time, nothing worked.
Finally I plugged his phone into one of the back usb ports and transferred over 2gb with no problem and no disconnects since.
My guess is the S4 is a power hog and some usb ports just don't supply enough juice. Try plugging it in to a usb port that comes off a motherboard. Don't use the front ports or usb hubs. Hope this helps someone.
Click to expand...
Click to collapse
I've been trying all kinds of different combinations of USB leads, phone settings and ports all morning and was just about getting ready to start a new Olympic sport of S4 hurling when I came across this post and plugged my USB straight into the back of my machine and it finally works!! Thank you dirrtpoor for your input - a simple fix, but nevertheless it worked.:good:
I suppose it makes sense that a quad core 1.9Ghz phone would be a power hog.
It wouldn't work on my home PC whatever I tried. Front or back USB ports.
On my dads PC sometimes it would display OK and other times "usb device has malfunctioned" (didn't try the rear USB port)
On my work PC it works fine on the rear ports.
I was having the same problem a few days ago, but then I reformatted the SD card, now everything seems OK.
Even the stock gallery app works now...?!
Guys I was having the same problem. For the life of me I couldn't figure out why suddenly my S4 wasn't being recognized by my computer. I finally went into developer options and noticed a "USB Debugging - Debugging mode launches when USB is connected" was turned on. I de-selected that, connected my phone and now my computer recognizes it again. I hope that helps guys, it helped me.
Samsung S4 sync problem
mgrisan1 said:
Guys I was having the same problem. For the life of me I couldn't figure out why suddenly my S4 wasn't being recognized by my computer. I finally went into developer options and noticed a "USB Debugging - Debugging mode launches when USB is connected" was turned on. I de-selected that, connected my phone and now my computer recognizes it again. I hope that helps guys, it helped me.
Click to expand...
Click to collapse
This may be laughably obvious but I'm a former Apple user, which has it's own dedicated USB connector, so I forget sometimes with the Samsung S4, which has a standard (looking) micro USB connector that I need a USB cable that is enabled for syncing as well as charging...not all USB cords with micro connectors on the phone end will carry the data because I imagine Samsung has made their phone's connector require a different wiring in the cable.
I was pulling my hair out yesterday trying to figure out why the computer wouldn't see the phone..then looked at the USB cable and realized I'd plugged a non-syncing cable in. I tried the cable that came with the phone and bingo, worked like it was supposed to.
Hope this helps, sometimes it's the little things we overlook that drive us nuts.
Any way to connect in master storage with out root.
Sent from my GT-I9500 using Tapatalk 4
Use a different usb cable and usb port. I know it sounds stupid but there has definitely been phantom problems which were solved this way, even with something as simple as adb commands
i have same problem. trying all the way but always with the same result...