Database Users

USB Problems Since Upgrade to 2.2.1

Since upgrading the Galaxy S to 2.2.1 which I absolutely love - must faster than anything previous, sleek, really well done, I've just noticed for the first time that my USB doesn't seem to work.
The computer sometimes sees it but just says the device is malfunctioning, the phone sometimes sees the PC and gives a menu for "ask on connection", but Windows just does not know what this device is at all.
Suspect I may have to reinstall the drivers fully in Windows, remove it completely and try again, if it actually showed up as an unknown device in Device Manager.
I do need to try another PC and cable just in case, but this is what Im having at the moment in Windows:
USB Device Not Recognized
One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.
Click to expand...
Click to collapse
And the Phone is currently not detecting any connection.
Any thoughts?
Cheers
Simon

I would go with a windows problem and remove the usb drivers/Kies .
Followed by fresh install .
jje

You can find a link to the usb drivers in my signature.

I think its a little more problematic.
I've tried another computer, another OS and another cable no joy.
I've installed aLogCat and Im getting:
Intent Action android.intent.action.ACTION_POWER_CONNECTED
Battery charging.plugType = 1
AC Charge
In MtpReceiverandroid.intent.action.ACTION_POWER_CONNECTED
Battery charging.plugType = 1
Not of USB charging. Dont lauch MTP APP
Click to expand...
Click to collapse
I've done a quick search on this. Hopefully this is as simple as doing a factory reset and format the internal sd.
If not, then Im off to a samsung service centre I think.
Any further thoughts?

:-(
Factory reset the phone, but the USB port still is not working. Charges fine, but don't connect over USB to the PC.

Can it be in debugging mode. Try to switch between mass storage and kies.
Probably you have checked that already..
Sent from my GT-I9000 using XDA App

the same problem from me i tried all but the usb is not working at all. I flashed kernel , i flashed rom but nothing .
Now i am looking to install untouched rom in order to give it to service but when i am trying to flash from recovery i get an error . Any suggestions?

This may sound dumb, but it could be the USB port acting up (loose connection). Try wriggling the cable around or use a different port.

alumine said:
This may sound dumb, but it could be the USB port acting up (loose connection). Try wriggling the cable around or use a different port.
Click to expand...
Click to collapse
I test the usb in all the modes (recovery and download also). I used different computers but the same thing

alumine said:
This may sound dumb, but it could be the USB port acting up (loose connection). Try wriggling the cable around or use a different port.
Click to expand...
Click to collapse
Right, I've tried all available USB ports, two different computers, two different OS's. The phone just does not register a USB data connection. It only recognises AC charging according to the logs.
I think I have a broken USB port on the phone as if I jam the connector in at an angle on the phone, it sometimes registers the data connection but its far too unreliable.
Development mode don't work, Kies, Mass Storage etc... anything. Nothing works.
Factory reset doesn't make it work.
I can't even flash a new ROM as the phone is not detected in download mode.
I've got the phone booked in at a Samsung Service Centre now. I've seen a few webpages referencing corrosion. I tell you what though, this phone has been protected way way more than my old N97. I've had so many phones and not one has suffered from "corrosion". So let them just try and say it's my fault. Im ready for em.

sjdean said:
Right, I've tried all available USB ports, two different computers, two different OS's. The phone just does not register a USB data connection. It only recognises AC charging according to the logs.
I think I have a broken USB port on the phone as if I jam the connector in at an angle on the phone, it sometimes registers the data connection but its far too unreliable.
Development mode don't work, Kies, Mass Storage etc... anything. Nothing works.
Factory reset doesn't make it work.
I can't even flash a new ROM as the phone is not detected in download mode.
I've got the phone booked in at a Samsung Service Centre now. I've seen a few webpages referencing corrosion. I tell you what though, this phone has been protected way way more than my old N97. I've had so many phones and not one has suffered from "corrosion". So let them just try and say it's my fault. Im ready for em.
Click to expand...
Click to collapse
Try cleaning your phone usb port. A guy named omersak had the same problem, and he had solved it. Search for the thread started by him, and how he has solved it.
I hope you can solve it without going to the service centre. And good luck.
Sent from my GT-I9000 using XDA App

Definitely trying that first - thank you to all the people that have been doing the investigation.
It sounds to me like Samsung have got a bad batch of USB connectors that should be replaced under a factory recall.
I don't use mine in a shower, or sauna, or anything like that, I don't even use it in the rain.
The closest it gets to any humidity is being in my shirt pocket from time to time.
Im going to get some meths or something like that and some thin paper and see what I can do with that. Im just off to Homebase!

there are similar problems on the galaxy 3 series where usb suddenly stops working. the following solutions seem to work there:
1. dial *#7284# to open "PhoneUtil"
2. in USB section, switch to modem, and then switch back to PDA
if that doesn't work: reboot into recovery and select "wipe cache partition"
*hth*

I've tried both of those before I start splashing the methylated spirit around. Still no joy.
Wipe Cache don't work, as well as wipe data/format sd/restore factory defaults etc.
I think I've got a 100% hardware fault.

@OP,
I am terribly sorry about your case. Looks like you need to make that trip to the service centre.
At least you have tried out every possible means known.
Sent from my GT-I9000 using XDA App

Also tried the meths. No good. :-(

The USB just started working yesterday. Still a bit intermittent, but when it gets a connection, it maintains a connection.
I've just ordered some isopropyl and a gold plated USB connector to be on the safe side

Hi everyone,
To sdjean: maybe you could read the post I sent a few minutes ago:
forum.xda-developers.com/showthread.php?p=12593413#post12593413
It might explain why your usb data connection does not always work ...
Regards.

I have a Samsung GT-I9000B and I cant use it using USB.
I have 2 usb cables, I am able to find my friends phones.
Now I cant change rom cause odin cant find it too.
Alog cat shows:
E/MTPRx ( 4020 ) Battery charging. plugType = 1
E/MTPRx ( 4020 ) Not of USB charging. DOnt launch MTP APP
Any suggestion?

I'm not an Expert but 2 hints from me:
1. If you have'nt tried yet: Install usb-drivers on pc new and then connect your phone and wait until drivers are installed to your phone.
One times this way worked on my i9000.
2. Look for a zipped rom on xda which you can directly download and install from sd-card.
Sorry, I know my English is bad.
Sent from my GT-I9001 using xda premium

[Q] Epic not mounting

I cannot get my epic to mount for ANYTHING! I factory wiped the phone, nope, I used a palm pre usb cable nope, I downloaded the official samsung drivers nope, I plugged the cable into the motherboard on the computer nope, I tried a different computer running windows 7, nope tried a laptop using windows vista, nope. Does anyone know ANY WAY POSSIBLE to get this thing to mount? I selected mass storage and dissabled and enabled usb debugging. Im just not having any luck. It seems that the computer recognizes the phone is connected just cant get to the files on the SD card.

I also spent many hours trying to figure out what the hell was wrong with my Epic, that is, why it would come up as a "malfunction" in Windows when I plugged the USB cable in.
I tried drivers, different restore points, wiping, etc. etc. etc.
To the point... Try a new USB cable. The one packaged with the Epic is junk. As a matter of fact, it worked several times before it crapped out. I have no idea why, but I picked up a new micro USB cable, plugged it in, and the phone was then immediately recognized by my computer to allow mass storage mount.
People who tried the Palm Pre USB cable also had issues for some reason.
IMO, there should be a sticky posted in this board regarding the packaged USB cable, as I encounter this issue quite a bit.

Ok I'll try to find a new one really quick thanks

ugh tried an HTC Mytouch 4g usb cable and that didnt work either. Gonna try a class 4 usb stick and im gonna try puttting all of the files on the computer from the SD card
Edit: Oh wow i cant put the files on the computer duh
Edit: Ok now I'm mad a Class 4 SD card wont connect to the computer thru the epic ughhhh

I'm guessing during this time, you've rebooted the computer a few times? Sometimes, that's all it takes...
Try uninstalling ALL of the USB drivers associated with the Epic, rebooting the computer, then connecting (with debug mode OFF). Windows found and installed the USB drivers for me in just a few seconds when I did this [with the new cable, the first time].
- G

Have u enabled development mode under settings > applications (in your) epic? If not, try that, then plug in cable.
Then pull down the notification bar and it'll give you back the option.. again, if you haven't tried this.

On occasion I have troubles with the Epic mounting/ejecting on a Mac, but the only time I've ever had an issue with it mounting on a PC a different cable solved the problem immediately.

Try a different USB port on your PC. If that doesn't work, try rebooting the PC and the phone.
I had luck with trying different usb ports though

I had this problem as well and:
1. Tried 4 different cables
2. Tried all 4 on all 4 different USB ports
3. Rebooted numerous times
4. Uninstalled/reinstalled drivers
5. Tried 3 different PCs (1 other running 7 and another running Vista)
6. Did 1-4 on all three computers.
OH! and the reason I was so adamant about finding a solution was that I was stuck in Clockwork... due to having messed up an EXT4/RFS/CW2.5/CW3.0 installation... It was MY fault... I screwed up.
The problem was I had been living with the nonmounting problem by simply putting my MicroSD into an adapter and plugging it into my Laptop for file transfers... never expecting to HAVE to ODIN at some time...
Anyway... I ended up coughing up the $100 to Insurance and replacing the phone.
HERE IS MY THEORY: I think what my problem was was that the USB port on the Phone was messed up. I think these USB ports are possibly a hardware fail point and the changing of cables has been a patch on the issue with the port... NOT the cables themselves!
I'm not suggesting that you are there yet since it sounds like you can at least still get the phone to boot up (and aren't stuck in CW) and could still use a work around of putting files on the MicroSD with an adapter...
But I would suggest you don't be as stupid as me and get yourself in a position where ODIN is your only hope.

Yeah, it sounded like a bad USB port to me. Also, FYIY, if you ever have to replace the phone through insurance, tell them that the phone was lost. Either way, it will cost you $100.00 to get a replacement and when it's reported as lost, they will also send you a new battery...

OregonLAN said:
Yeah, it sounded like a bad USB port to me. Also, FYIY, if you ever have to replace the phone through insurance, tell them that the phone was lost. Either way, it will cost you $100.00 to get a replacement and when it's reported as lost, they will also send you a new battery...
Click to expand...
Click to collapse
You don't really think that I sent in a phone that was stuck in CW do you? I don't think that would have worked too well for me.....
Cheers!

Did you end up doing an ODIN restore

Cant connect samsung S1 to PC

Hi,
I'm having a real though time trying to connect my galaxy s1 to a pc. Have tried everything, like kies, direct connection, reseted the device, and no joy.
When I plug the cable it makes that sound as it is connecting but it doesn't show in the PC anywhere, nor even in Device manager.
It can get pwr from the usb cable when is connected; already tried with another cable and same thing.
My final goal is to unlock it.
thanks for any help

have you tried put yoy're phone in depurating mode?

I guess yo mean Debugging mode, as I couldn't found Depurating anywhere. Have selected it and the same effect

HI
I had the same problem after getting nowhere with it, for some reason and I don"t know why, I put it in download mode and then connected it to odin and my PC found it I then disconected it and its been fine eversince.
Jim

#Samsung Kies always makes problems on Windows x64 !
##I would recommend, if you got 32-Bit Computer, to use that ;-)
#If you Want just flash over Odin, then is this driver package enough
##[Link]--http://download2us.softpedia.com/dl/85b009d47a0940e89eee2297a531d100/4f577870/300141878/drivers/mobile/SAMSUNG_USB_Driver_for_Mobile_Phones_1.4.8.0.exe
#The Package is also enough for If you want just to connect to mass Storage (Phone's SD Card)
Don't Forget to Thanks, if it was useful for you!
_______________________________________________

Hi there.
By direct connection you mean the USB Mass Storage mode, right?
It might be some weird, random problem with the samsung system drivers. I used to have such problems about two years ago, back in the days of Froyo. Have you tried re-installing them? There was a link to proper drivers file in one ICS installation tutorial, and those drivers can be downloaded here. If you go about trying this method, lemme know if it worked.
Cheers.
PS: Unlike diklooc there suggested, do not never EVER go back to x86 OS. That's the worst advice. Kapisch?

Did you check your usb port in System ?
Sometimes it stuck with another lastest device

Hi,
have tried everything, and finally only in a WinXP32 could be abble to get the error shown on the file atached.
But nothing (warnings) come up in Device Manager
Unninstalled everything (kies) and tried to install only the driver and nothing happens.
Should I try to mount it on a linux?
or is it dead?
thanks

i have this problem too
wat chan I do???
my sgs can not connect to my PC

This may help...
Hi there - I don't have the same phone as you, but I did encounter the exact same problem. I've been searching around and it looks like the most common fix was to simply replace the cable. I don't know what kind of cable you have, but my phone (a Samsung Focus i917) uses a mini-usb connector. I found that my Amazon Kindle used the same connector.
When I was using the Samsung cable, I'd get intermittent connects and charge power. The OS would report unknown device. When I switched computer's = same result. I switched to my Kindle cable and the computer instantly recognized the device and installed the drivers. After 12 hours of troubleshooting, factory resetting my phone (blah - lost everything) it turned out to be the cable. I know that this isn't an easy troubleshooting step for most people, because who has an extra cable? I just got lucky that my Kindle uses the same connector. I'm now suspecting (due to the prevalence of this connectivity problem coming from people with Samsung phones - there are a LOT of reported issues) that there is probably a Samsung cable problem in general.
Good luck with your phone.

try
try select mass strong ...

Tips and unlock advice.
nasdriver said:
Hi,
I'm having a real though time trying to connect my galaxy s1 to a pc. Have tried everything, like kies, direct connection, reseted the device, and no joy.
When I plug the cable it makes that sound as it is connecting but it doesn't show in the PC anywhere, nor even in Device manager.
It can get pwr from the usb cable when is connected; already tried with another cable and same thing.
My final goal is to unlock it.
thanks for any help
Click to expand...
Click to collapse
Nasdriver, I currently have a similar problem but mine is related with Samsung Kies as I can't get either my older SGS1 or my newer Samsung Nexus to get recognized by Kies. I also suspected the cable thing and even read it could be a USB port issue but neither of them was my problem (I have 3 cables and 8 ports on 2 computers that result in the same thing). I can connect other devices with the same cables and they work, so I suspect my problem is focused around the Samsung device drivers.
My advice is if you can go in a systematic manner, first focus on the cable (easiest to replace), if you get the same results with a new cable, then focus on the USB physical port, clean it with some Isopropyl alcohol, if the port works for other devices (camera, other phones, etc..) on the same cable but not with the SGS, then try reinstalling the samsung device drivers.
Oh, and if you want to unlock your phone, the EASY way is to download the Galaxy S Unlock application from the Android market (no affiliation) it's free (but the developer does accept donations) and it WORKS. I won't bore you with my 3 week journey trying to unlock my Bell SGS phone here in Canada, had I found this app first I would have done it in less then 2 min saved myself a LOT of frustration.
Good luck

[Q] Partly broken USB input - charging but "unknown device"

Hi guys!
I've had a problem over the day with my beloved HD2, and I've started to fear that it might actually be the hardware starting to decay. About a day or two ago, when inserting my phone to the MicroUSB cable, it recognized the HD2 just fine, had access too USB mount, ADB and all of that. Transfered some music to the SD-card (Trancent 16gigs Class 4, btw - still very well recognized by the phone to the time at writing this), but now, some time later I get nothing out of connecting the phone to either my laptop or rig.
I know it's not the drivers or the cable, since I've tried with others cables and a few other computers. The message is the same old "The device could not be recognized". But the funny thing is, somehow the device must know that its connected to a computer anyway, 'cause it instantly enables debugging and the option to enable mount. I, as of now, has had no luck getting into the SD card, sadly. Not even been able to pull logcats or anything, setting up wireless ADB hasn't been sucessful either - so where I stand now, I'm kinda in need for a helping hand.
Has anyone else ever had this problem too, or am I left out in the cold?
By the way, even managed to put on an older nightly CM9 build, as it was stored on my SD. No luck there either. MAGLDR mount / recovery mount doesn't function either. Same error.
The ROM I first had the problem on was PARANOIDANDROID v0.6. Then a nightly CM9 from sometime last week. Both immensely close to stock and ICS based. LEO512, by the way.
Please, give me a hand!
TL;DR: USB broken, still charging, help.

Your usb is getting loose (usb data connection becomes irratic and then stops working, continued use results in USB port ripped from mainboard), try to not use it while plugged in and see if the repair shop can fix it for you without breaking usb data. You can use the SwiFTP app in playstore to transfer files in the mean time.
You may also want to use a cradle charger to minimize USB port being used.

My Galaxy S4 won't stay connected to the computer via USB

Hey all. Just got my Galaxy S4 today and I was loving everything about it until... right now. For some reason, the darn USB won't stay connected to the computer. It doesn't matter if it's simply plugged into the computer as an "installer" or as a media device. It'll constantly disconnect and reconnect itself, even when I'm not transferring any files.
It's not the my computer/USB ports, either, since I can transfer files between my HTC Thunderbolt and Nexus 7 fine. I've also tested 2 other USB cables and they all behave the same way.
Anyone know what's going on? Did I get a lemon?

No im in the same boat. Was trying ti connect in today. I reinstalled and un installed the drivers about 4 times. Tried un selecting usb debugging in developers menu. Installed kies and used the drivers from it still no good. Used 3 different usb leads. Phone will still charge from pc and even when im installing the drivers again and connect the phone it will say that your new device is ready to use but still cant access phone, it simply does not show up.
Wouldn mind was working 2 days ago fine. Same usb port and all. And the port is fine cause my old s3 still reads from the same port.

snwman said:
No im in the same boat. Was trying ti connect in today. I reinstalled and un installed the drivers about 4 times. Tried un selecting usb debugging in developers menu. Installed kies and used the drivers from it still no good. Used 3 different usb leads. Phone will still charge from pc and even when im installing the drivers again and connect the phone it will say that your new device is ready to use but still cant access phone, it simply does not show up.
Wouldn mind was working 2 days ago fine. Same usb port and all. And the port is fine cause my old s3 still reads from the same port.
Click to expand...
Click to collapse
same problem with me!
every thing ok with s3 but the problem only with s4
please we need help to solve this problem!

Same problem
I have also been dealing with this for a while now. I have Windows 7 64bit and I have reinstalled the drivers many times through Kies and manually. It seems like the problem is getting worse since initially I could do some file transfer through usb if i fiddled with the device (changing usb ports, unplugging it, etc). Now I am hard pressed to get it to show up on the computer through MTP at all.
This is quite annoying since I am developing an android app and I need a usb connection in order to test it. A fix would be awesome.

I just tested on my sister's laptop and it doesn't have this problem. I clicked around the phone, transferred a 10gb movie, and left it plugged in to see if there were any signs of disconnects. None whatsoever. Odd. Maybe Galaxy S4 just doesn't like something with our computers. This is quite annoying.
I have a fresh Windows 7 64-bit partition I installed the other day so I'll test it out on that and report the results later today.

retsnom said:
I just tested on my sister's laptop and it doesn't have this problem. I clicked around the phone, transferred a 10gb movie, and left it plugged in to see if there were any signs of disconnects. None whatsoever. Odd. Maybe Galaxy S4 just doesn't like something with our computers. This is quite annoying.
I have a fresh Windows 7 64-bit partition I installed the other day so I'll test it out on that and report the results later today.
Click to expand...
Click to collapse
I do same thing, it is worked in another computer.
I am already put fresh win 7 but still same problem..

im on xp(retro yeah ha ha) but just a pc i have for my phones and stuff. But i got it working again by flashing my firmware through odin and its back working. Im blaming when i rooted it that it broke but ill see if it happens again
edit: Can confirm pc is now picking up phone. I just flashed the most recent stock rom for my carrier through odin and as soon as it finished updating its prefect now. Might wait another while to root it now and wait for more devs to jump aboard for more roms

snwman said:
im on xp(retro yeah ha ha) but just a pc i have for my phones and stuff. But i got it working again by flashing my firmware through odin and its back working. Im blaming when i rooted it that it broke but ill see if it happens again
edit: Can confirm pc is now picking up phone. I just flashed the most recent stock rom for my carrier through odin and as soon as it finished updating its prefect now. Might wait another while to root it now and wait for more devs to jump aboard for more roms
Click to expand...
Click to collapse
I'm on stock, no root.

Hi
I don't know if it may help but i noticed the usb doesn't work when the phone is locked.
I did check 'stay active while charging' in dev parameters and i never got disconnected again.
Sent from my GT-I9505 using xda app-developers app

Tested it out on a fresh copy of Windows 7 and it still continuously disconnect. What gives?

taargaa said:
Hi
I don't know if it may help but i noticed the usb doesn't work when the phone is locked.
I did check 'stay active while charging' in dev parameters and i never got disconnected again.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Oops, missed your post. Unfortunately, it disconnects regardless of the phone's state.

My friend's S4 was doing the same thing on his desktop. Every time he would try to transfer pics the phone would disconnect after a few files.
I tried different things from reinstalling drivers to trying to only copy over a couple of files at a time, nothing worked.
Finally I plugged his phone into one of the back usb ports and transferred over 2gb with no problem and no disconnects since.
My guess is the S4 is a power hog and some usb ports just don't supply enough juice. Try plugging it in to a usb port that comes off a motherboard. Don't use the front ports or usb hubs. Hope this helps someone.

dirrtpoor said:
My friend's S4 was doing the same thing on his desktop. Every time he would try to transfer pics the phone would disconnect after a few files.
I tried different things from reinstalling drivers to trying to only copy over a couple of files at a time, nothing worked.
Finally I plugged his phone into one of the back usb ports and transferred over 2gb with no problem and no disconnects since.
My guess is the S4 is a power hog and some usb ports just don't supply enough juice. Try plugging it in to a usb port that comes off a motherboard. Don't use the front ports or usb hubs. Hope this helps someone.
Click to expand...
Click to collapse
I've been trying all kinds of different combinations of USB leads, phone settings and ports all morning and was just about getting ready to start a new Olympic sport of S4 hurling when I came across this post and plugged my USB straight into the back of my machine and it finally works!! Thank you dirrtpoor for your input - a simple fix, but nevertheless it worked.:good:
I suppose it makes sense that a quad core 1.9Ghz phone would be a power hog.

It wouldn't work on my home PC whatever I tried. Front or back USB ports.
On my dads PC sometimes it would display OK and other times "usb device has malfunctioned" (didn't try the rear USB port)
On my work PC it works fine on the rear ports.

I was having the same problem a few days ago, but then I reformatted the SD card, now everything seems OK.
Even the stock gallery app works now...?!

Guys I was having the same problem. For the life of me I couldn't figure out why suddenly my S4 wasn't being recognized by my computer. I finally went into developer options and noticed a "USB Debugging - Debugging mode launches when USB is connected" was turned on. I de-selected that, connected my phone and now my computer recognizes it again. I hope that helps guys, it helped me.

Samsung S4 sync problem
mgrisan1 said:
Guys I was having the same problem. For the life of me I couldn't figure out why suddenly my S4 wasn't being recognized by my computer. I finally went into developer options and noticed a "USB Debugging - Debugging mode launches when USB is connected" was turned on. I de-selected that, connected my phone and now my computer recognizes it again. I hope that helps guys, it helped me.
Click to expand...
Click to collapse
This may be laughably obvious but I'm a former Apple user, which has it's own dedicated USB connector, so I forget sometimes with the Samsung S4, which has a standard (looking) micro USB connector that I need a USB cable that is enabled for syncing as well as charging...not all USB cords with micro connectors on the phone end will carry the data because I imagine Samsung has made their phone's connector require a different wiring in the cable.
I was pulling my hair out yesterday trying to figure out why the computer wouldn't see the phone..then looked at the USB cable and realized I'd plugged a non-syncing cable in. I tried the cable that came with the phone and bingo, worked like it was supposed to.
Hope this helps, sometimes it's the little things we overlook that drive us nuts.

Any way to connect in master storage with out root.
Sent from my GT-I9500 using Tapatalk 4

Use a different usb cable and usb port. I know it sounds stupid but there has definitely been phantom problems which were solved this way, even with something as simple as adb commands

i have same problem. trying all the way but always with the same result...